used BPS RECYCLINGANLAGEN for sale

Used alligator scissors in good condition - Blade length 406 mm - Electric motor 400 V, 4.0 kW - Knife opening max. 250 mm - Cutting capacity up to max 50 mm round bar The scissors have been checked and repaired by us We supply a second, unused knife set for the scissors The machine is immediately available and can be viewed and tested at our premises. More information at infoRecyclinganlagen.info

Overhauled hydraulic shears with new blades, seals, etc. With strong 0 t cutting cylinder. Perfect for demolition or recycling or as cable cutters in cable recycling. The shears can be operated via an electric or gasoline-powered hydraulic pump. The scissors are the reinforced industrial version and not a lighter rescue scissors. The scissors can be viewed and tested at our premises.

The machine in one is a used twin-shaft shredder. The machine has been used in recent years for pre-shredding old cables. The year of construction of the shredder can no longer be determined. A good 2 years ago, new electric motors and a new control cabinet with a revised control system were installed. The outlet is currently provisionally made of wooden boards, but can also be replaced or adapted by sheet steel if desired. The shredder is available from approx. mid-April 2025. Specifications: Drive: 2 x 15 kW, 400 V Rotor length: 850 mm Shaft spacing: 250mm Knife width: 65 mm Blade torque: 8,600 Nm Filling opening: 1.7 m x 1.2 m Weight, approx. 2,000 kg

It is a unit for cutting open catalysts and removing the ceramics. It comes from a lease return and is unused. The hydraulic shear has the extension for opening the interfaces compressed interface. There is also a hydraulic hold-down device for holding other materials, such as profiles or sheet metal. The connection for a dust extraction system is also available on the Catmate. The scissors come from the manufacturer JMC/Mc Intyre, the operation is via a foot pedal as a single cut or in continuous operation. Blade length : 508 mm Knife opening: 255 mm at the tip Cutting cylinder: 120 tons Dimensions, ( L x W x H ) approx. : 1.7 x 0.9 x 15 mm Weight: 1150 kg Drive: 7.5 kw / 400 V The unit is available for immediate delivery and can be viewed, tested and picked up from us in Weimar. For more information, see infoRecyclinganlagen.info

Compact but extremely versatile cable recycling plant. The pelletizing plant has both a Z-classifier (Zigzag) for the separation of 1 mm heavy copper and a turbine mill for processing fine cables and data conductors. The system was only fed and used by hand with selected cables. The condition is correspondingly good. Specifications: Suitability: Cables, cut to length without impurities Throughput capacity max. 150 kg/hour Connected load: 19 kW Dimensions (LxWxH): 1.4 m x 0.7 m x 2.3 m Weight: 1,200 kg Further information: infoRecyclinganlagen.info

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Universally applicable alligator shears for almost all areas of application in scrap metal operations. Fast, powerful and robust. Specifications: Knife caps: 406 mm Cutting cylinder force: 106 tons Cutting speed, max: 60 cuts/minute Weight, approx: 1,000 kg Operated by foot pedal Single cut or endurance run Further information: infoRecyclinganlagen.info

Strong alligator scissors with longer blades - ideal for radiators and trays. The Deltax DTX 4/600 not only has longer blades than its little brother, but also a higher cylinder force. The hold-down device can be securely locked at different heights and does not slip upwards during operation. The scissors are also available in the CAT version with an additional push-on aid. Specifications: Blade length: 610 mm Max. opening width of the blades: 318 mm Cutting pressure of the knife: 110 tons Drive: 7.5 kW, 400 V Cutting speed, max: 60 per minute For more information, see infoRecyclinganlagen.info

Heavy alligator scissors with maximum cutting power. The Deltax DTX 600 offers the unique hydraulic hold-down device that lowers parallel to the lower knife. This keeps the round material and material shaft secure. Nothing slips out to the front. This means that several bars or profiles can be processed safely in one go. Specifications: Blade length: 610 mm Cutting force: 172 or 210 tons cylinder pressure Opening width: 330 mm Drive: 11.0 kW, 400 V More information at infoRecyclinganlagen.info

Used cable pelletizing system for mixed and stranded cables. The machine has been overhauled and equipped with new tools. The turbine was re-mounted and the control panel was replaced. In addition, the material inlet control has been activated so that the machine can be used automatically. The hourly output depends on the cable up to approx. 250 kg/hour when using a 5 mm sieve insert. The attached video shows the system in combination with the dosing tank and plastic loading. These components can be supplied as an option. It is operated via a 63 amp connection at 400 V. The power consumption is 28 kW. The plant can be visited and tested at our premises. More information at infoRecyclinganlagen.info

Used shredder for the pre-shredding of old cables and other materials. Cutting unit with knife blocks instead of cutting crowns. Two stator knives arranged opposite each other for higher hourly output. Easy-to-reach maintenance areas. Drive with 2 electric motors with 7.5 kW, 400 V each and a reduction gear arranged directly on the rotor axis. Hydraulic slide valve with load control. Rotor reverses in case of overload. A gearbox replaced. Perforated sieve 25 mm. Additional set of rotor blades. Output approx. 200 kg of cable per hour. The machine can be viewed and tested with us. Write to us. infRecyclinganlagen.info.

This BA 40.30 granulator was part of a cable recycling plant. These granulators were used by Tecnoecology and MG Recycling. With a rotor length of 400 mm and a diameter of 300 mm, the granulator can handle up to about 500 kg/hour of old cables. The granulator has its own control box with control panel and can therefore also be used standing alone. The granulator comes with several sieves and knife sets.

Machine for the processing of mixed waste cables, especially with fine conductors and stranded cables, The plant was most recently used for the post-cleaning of residual plastics from other cable recycling plants. Thanks to the rotor system with the 24 knife segments and the large flywheel masses, the system is also suitable for manual operation. The machine has a cooling unit that optimizes the granulator with a flow temperature of 0.5 °C for the use of heat-sensitive cables, such as NYM, etc. The control electronics of the system enable fully automatic operation in a line with pre-shredder, conveyor belt, dosing accumulator, etc. The machine includes several sets of knives and different sieves. In conjunction with a suitable pre-shredder, the system can process up to approx. 250 kg of old cable. The system was completely overhauled by us and equipped with new tools and par ...