used Double-Plate Grinding Machines for sale

Grinding length: 0 mmGrinding width: 0 mmGrinding height: 0 mmWheel diameter: 0 mmCNC Brand: 0CNC Model: 0 Technical dataVoltage 50 Hz 3x: 400 VoltTotal power required: 40 kWMachine´s weight about: 22000 kg

Code 61063 Description Surface grinding machine Make ABA Model FFU 2000/60 Serial No. 208 125 Control Abamatic 3 Year 1986 Tablesize 2510 x 500 mm Grinding surface L x B x H 2000 x 600 x 700 mm Magnetical plate size L x B 2000 x 500 mm Speed table movement 3 – 30 m/min. Max. distance table – centre grinding wheel 900 mm Grinding stone dim. Stone x Wide x Taper Ø 400 x 50 x Ø 127 mm Spindel power 26 kW Spindel speed 1600 - 3000 rpm Motor power 26 kW – 380 Volt Total electr.com. 34 kW Total space L x W x H 7000 x 3500 x 2650 mm Weight 10500 kgs Accessoiries Elec. Magneticplate 2000 x 500 mm Coolant with paperfilter Digital readout Grinding stones, etc. Condition Machine is in good condition

Surface Grinding Machine ABA FFV 1000/50 Travel X: 1000 mm Travel Y: 500 mm Travel Z: 400 mm Magnetic chuck dimensions: 1000 x 400 mm Auto stepover X / Y / Z Separate electrical panel Separate lubricant tank Separate hydraulic group Voltage: 380 V Length: 4000 mm Depth: 1700 mm Total height: 2300 mm Weight: approx 6 T

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Used IRB4440/60 industrial robot. IRB 4400 is an extremely fast, compact robot for medium to heavy handling. The load capacity at very high speeds usually permits handling of two parts at a time. Year: 2011 (We also have 2008, 2009 options available) Reach in mm-1960 mm Payload-60 kg Cabinet: IRC5 Teach Pendant: NOT included but we can try to find one for you Signalling & Power Cables: Included Gripper: NOT included Please contact us for a quote and also the refurbishment options Main Applications: - Cutting/Deburring - Die Spraying - Dispensing - Grinding/Polishing - Measuring As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brand of KUKA, ABB, FANUC and Motoman.

Dear's Sale, T/C complate ABB TPS 52 Recon, Good condition Regards +905323642509 info@kscege.com

Dear's Sale, T/C complate ABB TPS 57 Recon, Good condition Regards +905323642509 info@kscege

Stock # U2436 Used stainless steel lab size double cone powder mixer by ACH-MECH (PL). Total volume of mixing chamber 25 l. Working volume about 12-15 l, with maximal weight of batch up to 16 kg. Contact parts designed in stainless steel AISI 316L. Feeding inlet has diameter 200 mm and is closed with stainless steel lid. Discharge outlet has diameter 80 mm and has manually operated buttlerfly valve. Distance from discharge outlet to bottom support plate 730 mm. Mixer has also manually rised, plexiglass cover, equipped with safety switch. Machine is driven by el motor 1.1 kW, 1415 rpm, 230 /400 V , 50 hz. Working rotation adjustable in range from 4-18 rpm. Machine has local control panel, and is mounted on mobile pedestal, designed in stainless steel AISI 304. Includes technical documentation and CE certificate.

ACMA rotary frame press line 4-tray carousel Manufacture of plywood beams, solid wood panels Ideal joinery, finger jointing, worktop, etc... Press n°1: Useful length: 4500 mm Usable height: 1300 mm Useful thickness: 100 mm 5 hydraulic front balers 10 double-acting hydraulic cylinders Press n°2: Usable length: 7500 mm (3 zones of 2500 mm) Usable height: 1300 mm Useful thickness: 100 mm 9 hydraulic front pressers 18 double-acting hydraulic cylinders Wood feeding table, gluing width 200 mm Vertical roller discharge table Traffic congestion: Length: 9000 mm Width: 2900 mm Height: 3200 mm Weight: 13000 Kg

Printingmachine - Four Colour Offset press Make Adast Model Dominant 547P Year 1996 Maximum sheet size 381 x 520 mm (in perfecting mode a little less) Dampening Varn Kompac III Feeder stream feeder - up to 12.000 sheets per hour Perfecting 4-0 / 2-2 Delivery low pile delivery Ink bins INKLFOW remote controlled sliced ink ducts Plate change semi automatic Available Direct

ADAST DOMINANT 846 P -Year 2001 -Impressions: 42 mil. ( battery changed and started now from zero ) -Perfecting 2+2 or straight 4+0 -Size max: 520x740 mms. -Max speed 12.000 sh/hour -Max paper thickness 0,5 mms. -Alcohol dampening with Technotrans refrigeration -High pile delivery -Table control for all registers -Easy plate change system -Powder sprayer, in production

Cooling capacity: 969 kW (12/7 — 35°C) Heating capacity: 1002 kW (40°C/45°C - 7°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Number of fans: 18 pcs. Heat exchanger: Plate Options: Heat pump, High Efficiency, Hydraulic module Hydraulic module: 2 pcs. water pump, expansion vessel Type of refrigerant: R410A Compressors: 6 pcs. Copeland (scroll) Dimensions: 2.24 x 2.20 x 10.71 m. Weight: 8 120 kg. Working hours: 256/256/1006/10046/10049/10055 Condition: Exsellent, Outlet

Cooling capacity: 195 kW(12/7 — 35°C) Year of manufacture: 2012 Number of fans: 6 pcs. Refrigerant circuit: 2 pcs. Type of refrigerant: R410A Heat exchanger: Plate Options: Freecooling Compressors: 4 pcs. Danfoss (scroll) Dimensions: 1.97 х 1.50 х 4.35 m. Weight: 1700 kg. Working hours: 127/1444/1455/240 h. Condition: Excellent

AGFA Acento II S CTP system Age: 2006 Max. Plate Format: 830 x 660 mm Max. Imaging Area: 830 x 633 mm Running Time: 33.575 hours only Exposure Time: 4974 hours Plate winding cycles: 98,296 Plate Type: Thermal printing plates 32 Infrared Laser Diodes Performance: 21 plates/hour Resolution: 1200 – 2400 dpi Internal Bacher Punching for Format 52 x 74 cm Consists of: AGFA Acento II S (PT-R4300S) AGFA Azura C95, Age 2012 Clean out station Advand PST 26 Plate Stacker Computer with Dongle Torrent Software RIP

4 up Thermal CTP AGFA Acento S 2006 year 95,000 plates produced with Multicasett loader with Stacker with with AGFA Apogee 3 RIP loacted germany Price: on request

450 x NEW PRINTING PLATES ALUVA N 15 NEGATIVE PLATE (510 x 400 mm)

4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced

8 up Thermal CTP Avalon N16–50 XT med MAL 3 kas. Punch system Bacher 780 Avalon N16, Jan 2010 MAL, Apr 2010 Elantrix 125, march 2009 Life time plates 278218 p Lifetime running 105212 h Actual running time 11096 h Exposure time 4647 h LD Status Reserve (U) 83 Current (U) 23 Reserve (L) 26 Current (L) 23 LD (U) replaced 25, march 2022 Under AGFA Service since installation Price: on request

up to max. panel format 2,100 x 1,600 mm, min. plate format 650 x 550 mm, in Dual Plate mode 2 plates simultaneously up to max. plate format 1,060 x 1,600 mm, incl. Avalon N40 Skid Loader and N40 Multi-Cassette Loader, Thermal Laser 830nm 512 Laser Channels, Resolution 2,400 dpi, internal register punch, with Ethernet to PIF Box Interface, Windows Server with Apogee PlateMaker, optionally with online development line, burning-in-oven, NELA line, very good condition, maintenance contract maintained, Immediately available, price from location on request

4 up thermal CTP AGFA Avalon N4 year 2010 with AGFA Apogee RIP with Cleanout unit 46.000 plates produced

4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request

4 up thermal CTP AGFA Avalon N4-30X with L300 Platemanager year 2019 ONLY 200 plates produced Price: on request

8 UP Thermal CTP Avalon N8 50 XT year 2008 250,000 plates produced MAL 4 cassettes, 2 punches bacher 425W 780W bridge Arkana 125 online-processor ethernet to PIF interface Price: on request

VLF Thermal CTP AGFA Avalon VLF Model: AGFA Avalon 50 XT size: 120 x 160 cm year: 2006 with AGFA Platemanager with AGFA Cleanout unit with Tiff shooter Price: on request

2 Thermal VLF Systems: 1 x AGFA Avalon VLF A xxt year : 2006 5000 paltes with new Laserhead AGFA VLF Platemanager with AGFA Elantrix 150 Onlineprocessorwit transit table to the oven. with Haase oven OG15FU with transit table to gum unit withGum unit RSH with explanation table Price: on request 1x AGFA Avalon VLF A xxt year : 2006 Price: on request

washout Agfa Azura C 95; good condition; cleaned and tested; new infeed and medium rollers incl. Bearing; suitable for chemical-free negative plate Agfa Azura; Infeed width 200-950mm; Min. Panel length 310mm; Panel thickness 0.15-0.30mm; Inlet and outlet table. Cleaning unit Agfa Azura C 95; good condition; cleaned and checked; new infeed and middle rollers incl.bearings; used for chemfree negativ plate Agfa Azura; Einfeed width 200-950mm; Min. plate lenght 310mm; plate thikness 0,15-0,30mm; infeed aand outfeed table.

Agfa Azura C 95 washout; cleaned and tested; Working width 200-950mm; Printing plate length 310-1100mm; Printing plate thickness 0.15-0.30mm; Double brush; suitable for chemical-free printing plates. Clean out unit Agfa Azura C 95; cleaned and checked; working width 200-950mm; plate lenght 310-1100mm; plate thikness 0.15-0.30mm; double brush; used for chemistry free plates.

Thermal Plateprocessor Manufacturer: AGFA Model: Elantrix 125 SX year 2016 (incl. AGFA Amigo KIT) Price: on request

Fully automatic $ up Thermal CTP AGFA Acento II s (Screen 4300 S) with Multi-Cassett Loader (MA-L) year 2015 Only 52262 plates produced with AGFA PREPRESS RIP with Stacker (Also Cleanout Unit AGFAA Azura avilable)

Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg

Aleanderwerk KN 20 Zwilling Combination machine consisting of bowl cutter and meat grinder Bowl cutter with 20 l bowl volume Knife head with 3 pcs. included Two cutting speeds: 1. 1500 RPM. - 2. 3000 RPM. Stainless steel bowl Including thermometer for temperature indication Meat grinder 82 mm diameter Two grinding speeds Including brand new cutting set Machine sits on a movable frame with 4 rolls

ALFA LAVAL 314 CREAM SEPARATOR AND CLARIFIER COMPLETE WITH CONTROLS, BASE PLATE, WATER VALVES, ETC. NO TOOLS

2 x Alfa Laval Cream Separators Condition : Incomplete Used for spare parts Available are : Bowls, Plates, Body’s stainless steel , motor, 1 x cream separator valves and internal gears.

Alfa Laval plate heat exchanger Aqua first Very little used Included isolation protection box

Stock number: UG6204 Second hand, refurbished, stainless steel plate heat exchanger by Alfa Laval type CLIP 6-RH (C6). Plates designed in stainless steel AISI 316L. Working volume 68.2 l. Working pressure 16 bar, test pressure 21 bar. Working temperature in range from 0 up to 110 C. Connections are DIN 11851 DN50. Exchanger is mounted on stainless steel frame. Gaskets designed in NBR, mounted without a glue, type clip-on. Unit is cleaned and leak tested. Last time used on food. Includes stainless steel covers.

Decanter Alfa Laval Foodec 700 in excellent conditions. Control Panel not included Decanter Foodec 700 Yr : 2012 Description Bowl : 2 or 3 phase version: 2 phases - open Maximum main speed: 3100 rpm Bowl length: 2565 mm Bowl diameter: 650 mm Beach angle: 20° Solids discharge type: 360°-type with 8 wear liners Solids discharge radius: 175 mm Wear protection solids discharge: Wear liner in tungsten carbide, 8 pieces Solids transportation aids, cylindrical section: Ribs Solids transportation aids, taper section: Ribs Material - hubs: AL 111 2329 (Duplex stainless steel) Material - bowl shell: AL 111 2329 (Duplex stainless steel) Material - bolts: A4-80 (AISI 316) Liquid outlet, type: 8 Standard Plate Dams Conveyor : Features: Windows / Double cone Feed zone type: Esbjerg with exchangeable wear liners (EU3) Pitch: 1x230 mm Flight inclination: Perpend ...

Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function:Whey separator/ Cream separator Capacity: 10,000- 12.500 Litres/ Hou rMotor power:15 kW Electrics: 380V/ 50 Hz/ 3 Phase Bowl speed: 1450 rpm Tools Base PlateNew Control Panel New Water system ( Valves, pressure vessel, connections, etc.) Service Spare Parts : Dairy Machinery UK

For sale is a used base plate with accessories. For sale only within Europe. Price factory Travenhorst. Foundation plate No.: 543688 80, 3x Holder 528729 02, 9x Screw Tel: 0049 45569819444 ----------------------------------------------------------------------------------- Our company: For many years now, we have been supporting national and international companies as a recovery plant for separators. In our new plant, Alfa Laval and Tetra Pak separators / centrifuges are generally overhauled at the highest level for our customers and converted on request.Our centerpiece, the test bench, is constantly being expanded in order to reach the highest performance of the various machines permanently and reliably. As a result, our customers profit from the modernized separators in terms of availability and costs. Benefit from our experience - benefit from our services!

ALFA-LAVAL Plate heatexchanger CLIP 10, YOM 1998. Used for milk pasteurisation. 5 sections, ±450 plates. good condition.

Alfa-Laval M101-BWREF plate cooler

Alfa-laval plate cooler typ. M6-MWFDR

6-color R25476/17 ALLIED GEAR label flexo printing machine model: Flexomaster age: 1995 available: immediately 6 colour 6 anilox rolls paper cutter laminator transporter power unit UV dryer Video mounting plate (JM Heaford)Still in operation: YesAvailable: nach Absprache

Code 61047 Description Hydr. Surface grinding machine Make ALPA Model RT 1000 Serial No. 53377 Year 1985 Tablesize 1200 x 300 mm Table grinding size L x B x H 1000 x 350 x 400 mm Base size L x B 1000 x 300 mm Speed table movement 3 – 40 m/min. Rapide vertical movement 0,15 m/min Max. distance table – centre grinding wheel 600 mm Grinding stone diam. Stone x Wide x Taper Ø 400 x 50 x 127 mm Spindel power 8,8 kW Spindel speed 1460 rpm Weight 3000 kgs Motor power 8,8 kW – 380 Volt Accessoiries Magneticplate 1000 x 300 mm Coolant Grinding stones, etc. Condition Machine is in normal condition

Ultra fine grinding plant, consisting of: Fluid bed opposed jet mill Alpine 630 AFG (V total: 885 dm³, 10 bar shock pressure resistant, fold out classifier wheel), cyclone, 2 pcs. EX shutter valves, control cabinet and 4 pcs. product containers. Prior use: Toner production. Plant can be inspected in already dismantled state. Available for an additional charge: Dust filter Buehler PGFG 60/18 (39 m² filtering surface).

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

Busbars for any shipbuilder or re-fit project. Produced following the highest European standards and availability rate FOR QUOTATION: INFO@AMP-POWER.NL Maximum Voltage 300 V AC/ 48V DC Number of terminal studs : 4 / 8 Terminal Type : 16 Stud Terminal stud torque : 15.82 Nm Continuos Rating : 545A AC / 600A DC Base Material: Reinforced Polycarbonate Bus Material : Tin-Plated Copper CDA 11 /UNS11000 Weight : 0.79 kg / 1.25 kg

CAPSULING MACHINE AMS FERRARI FOR PVC Year : 2015 Single thermal heads with double ventilations Distribution capsules by plateau Speed: 2500 bph Equiped with nr.1 round bottle (diam. 98-100mm)

20 hl brewhouse delivered by ANT in 2014, available - 20 hl 3-vessel, mash mixer, lautertun, brewkettle/whirlpool, steam heated, with semi-automation. - 25 hl HLT - 200 kW natural gas steam generator (made by Manara, Italy) - Plate HX for cooling wort, with aeration system and 30 l in-line yeast vessel - Glycol chiller with tank - Brewhouse platform - Malt mill (made by Sommer, Germany) - Various piping, valves etc. The equipment is of good quality

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

This flash pasteurizer was manufactured by APV in year 2005 for eliminating harmful microorganisms from beer before packaging. Pasteurizer is completely built on one stainless steel frame and all equipment and instruments are wired. All product touching parts are polished food quality stainless steel (AISI 316) or special plastic suitable for food processes. The machine has CIP connection for proper cleaning. Product is heated in and cooled after pasteurization in a 3-stage plate heat exchanger (heating, cooling and heat recovery) using low pressure steam for heating and cold water / glycol solution for cooling. Pasteurization takes place in tubular stainless steel holding tube following the heat exchanger. The machine contains a heat exchanger, holding / pasteurization tube, control cabinet, pumps, pipes, valves and instruments all built on stainless steel frame. Technical Characteri ...