used Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes) for sale

turning diameter over bed: 230 mmturning diameter over slide rest: 100 mmturning length: 500 mmturning diameter in the gap: mmturning speeds: 160 - 5000 U/mincentre height: 115 mmspindle bore: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: 1,5 x 0,8 x 1,6 mMechanics lathe- Collet chuck- Multifix steel holder- Accessories see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Self-learning lathe CMT TCH 700 x 5000 :::TECHNICAL SPECIFICATIONS::: CNC model: ECS - Spindle nose: ASA 11 - Spindle power: 35Kw - Turning diameter on the bench: 720mm - Turning diameter on the carriage: 385mm Turning length: 5000mm - Number of revolutions: 2200 - Bar passage: 105mm - Mechanical range change: yes - Number of ranges : 2 Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 12 First turret tool attachment type: VDI First turret X-axis travel: 450mm Z-axis travel first turret: 5000mm :::D DIMENSIONS AND WEIGHT::: Weight: 8000Kg

turning diameter over bed: 433 mmcentre height: 215 mmcentre distance: 1500 mmturning dia. over face-slide: 267 mmspindle bore: 76 mminner taper MT: 5 spindle turning speed - stepless: 20-1600 U/minweight of the machine ca.: 2.2 tdimensions of the machine ca.: 300 x 120 x 140 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Colchester Lathe Master 2500 - Tip width: 1 m - Width: 190 cm - Depth: 90 cm - Height: 140 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

turning diameter over bed: 360 mmcentre height: 170 mmcentre distance: 650 mmturning dia. over face-slide: 196 mmspindle bore: 42 mminner taper MT: 5 spindle turning speed - stepless: 20-3250 U/minweight of the machine ca.: 1,6 tdimensions of the machine ca.: 200 x 125 x 165 cmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 330 mmturning diameter over slide rest: 210 mmturning length: 635 mmcentre height: 165 mmspindle bore: 42 mmturning speeds: 22-1800 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 1.000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmturning diameter over slide rest: 246 mmturning length: 635 mmcentre height: 195 mmSpindle Speed: 15-2500 UpMspindle bore: 54 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2.500 kgdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmcentre height: 195 mmturning diameter over slide rest: 246 mmturning length: 1250 mmspindle turning speed - stepless: 0-2500 U/minweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2x1.3x1.6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmcentre height: 195 mmturning diameter over slide rest: 246 mmturning length: 1250 mmspindle turning speed - stepless: 0-2500 U/minweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2x1.3x1.6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mmcentre height: 195 mmturning diameter over slide rest: 246 mmturning length: 650 mmspindle turning speed - stepless: 0-2500 U/mintotal power requirement: 7,5 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2x1.3x1.6 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning range Center height 170 mm Center width 650 mm Turning diameter over bed 350 mm Turning diameter over cross slide 196 mm Turning length max. 650 mm Main spindle Speed range 3 ranges: 0-340 rpm, 0-1010 rpm, 0-3250 rpm Drive power 7.5 kW Spindle Nose D1-4 Camlock Spindle bore 42 mm Manual control, 2 axis Fagor digital equipment Tailstock Quill diameter 63 mm Travel 145 mm Morse taper MK 4 Accessories 3-jaw chuck Different jaws to feed Lunette Various tool holders Operational documentation

Conventional lathe COMEV 200, 200 x1000 mm., Information about technical data are not binding., Machine available subject to prior sale., Height centres: 200 mm, Swing over crosslide: 230 mm, Distance between centres: 1000 mm, Bed width: 280 mm, Spindle nose cam-lock din55029: 6 , Spindle bore: 52 mm, Spindle speed: 25 - 1600 rpm, Number of spindle speeds: 16, Spindle motor power: 3 Kw, Tailstock quill diameter: 52 mm, Taper of quill mt: 4, Approx net weight: 1.300 Kg

: Aufnahmen Divers K50 Diameter: 50 mm: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine designation DMG MORI NEF 360 LZ Year of construction 2022 Condition very good SPECIFICATIONS + Workspace Circumferential diameter over bed: 360 mm Circumferential diameter over face slide: 195 mm Center width between DIN 806 tips: 800 mm Turning length: 800 mm Bed width: 260 mm + Tailstock with handwheel Quill stroke: 110 mm Diameter of the quill: 50 mm Mounting cone DIN 228: MK 3 + Drive Speed range: Up to 4,000 rpm + Turning spindle Spindle head DIN 55027 (standard): size 5 + Tool carriage Tool System: Size B

turning diameter over bed: ? mmturning diameter over slide rest: ? mmturning length: ? mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: LZ Lathe Manufacturer: GDW Type: LZ250 S1 Year of Make: 2001 Condition: little used / very good Other: original paint Offer will only be sent if a complete imprint is provided! Price 11.500 Euro incl. 19% VAT 9,664 euros net plus 19 VAT Location Warstein , Germany Reference M-GDW-1124 DESCRIPTION We offer you a used lathe from the manufacturer GDW in rare condition. Specifications Tip height 125mm Circumferential diameter 250mm Center width 500mm Stepless spindle speed 60-3000 rpm Multifix Size A Footprint 1300x700x1400mm Weight 600kg Available from the beginning of January 2025 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and ...

GEMA LZ 200 Lead & Pull Spindle Lathe -Tip height 200mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Tip width 1000mm -Spindle passage 54mm -Speed range 36 - 2200 rpm Automatic longitudinal & face feeds -Tailstock MK 4 - Adjustment 200mm -Guided tours very good -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2.4x1x1.5 meters / Weight 1700 kg

:::TECHNICAL SPECIFICATIONS::: CNC model: Fagor - CNC version: 8055 TC - Spindle power: 34.5Kw - Turning diameter on the bench: 1000mm Turning diameter on the carriage: 680mm - Turning length: 5000mm - Number of revolutions: 1600 - Bar passage: 104mm Mechanical range change: yes Number of ranges : 2 Weight between tips: 4800Kg Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Fast feeds linear axes X Y Z: 8m/min Tailstock: yes Steerer stroke: 300mm Chip conveyor: belt Self-centering bezel: yes

SWING OVER BED 62.99 (1600mm) SWING OVER CROSS SLIDE 43(1100mm) SWING IN GAP 75(1905mm) GAP LENGTH 23 (585mm) DISTANCE BETWEEN CENTERS 314.96(8000mm) MAX. WORKPIECE WEIGHT, UNSUPPORTED 30,000 LBS SPINDLE SPEEDS 2.8 - 266 RPM SPINDLE BORE 4.01 BED WIDTH 31.5 LONGITUDINAL FEED RATE .0031 - .23 IPR CROSS FEED .0015 - .11 IPR METRIC THREADING, 96 1 - 300 MM INCH THREADING, 108 .0625 - 30 TPI SPINDLE MOTOR 50 HP APPROX. MACHINE WEIGHT 51,400 LBS MACHINE ELECTRICS 230/3/60 MACHINE FOOTPRINT 447 X 108 MACHINE HEIGHT 100 EQUIPPED WITH: 55 4-JAW CHUCK 4-WAY TOOL POST TAPER ATTACHMENT INCH/METRIC THREADING (2) ROLLER TYPE STEADY REST, 52 & 30

: gefült mit 43 Aufnahmen height: 2.200 mmwidth: 1.200 mmweight of the machine ca.: 300 kg: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: . centre distance: 3000 mmmax. swing diameter: 660 mmmultifix: . steady: 2 Stück weight of the machine ca.: 5 t: KW 39/2022 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serial number: 80131-0271 centre distance: 2000 mmcentre height: 250 mmbore diameter: 63 mmwith digital read-out: K+C Easson10L voltage: 380 V: 220 Vampere: 16 AThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heidenreich & Harbeck Hamburg 840 Condition Used Year of manufacture 1970, geometrically overhauled 2023 Specifications: Circumferential diameter over bed: 840 mm Circumferential diameter over cross slide: 520 mm Center width: 1500 mm Tip height: 420 mm Motor power: 11 kW Bed width: 600 mm Spindle bore: 127 mm Feeds longitudinal: 0.08 - 2.8 mm/rev Feed plan: 0.04 - 1.4 mm/rev Quill stroke: 300 mm Spindle speed: 7.1 - 1400 1/min Weight, approx.: 6500 kg Dimensions, approx.: 4000 x 2200 x 1800 mm Equipment: - 3-jaw lathe chuck Forkardt, D = 400 mm - 3-axis digital display - Quadruple steel holder Scope of the partial overhaul: - Machine partially disassembled and repainted - Guides ground on both sides (Z-/Z_0-/X-axis) - Tailstock quill, hard chrome-plated and ground (inside/outside) - New back panel made of stainless steel

turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1000 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0390 mm: 240 mm: 1250 mm: 190 mm: 57 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 260 mmturning diameter over slide rest: 150 mmturning length: 400 mmturning diameter in the gap: mmturning speeds: 235 - 2800 U/mincentre height: 130 mmspindle bore: 26 mmtotal power requirement: kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,25 x 0,8 x 1,2 mMechanics lathe- 3-jaw chuck 160 mm- Accessories see picturesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

:::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC Version: 4802 Self-centering diameter: 1500mm Turning diameter on the bench: 2000mm Turning diameter on the carriage: 1360mm Turning length: 4000mm Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Tailstock: yes Positioning: Automatic Chip conveyor: belt Machine equipment: Large steady rest up to 1300 mm small bezel up to 600mm Large boring bar diameter 150 by 2000 mm long

Description Lead and Pull Spindle Lathe Lieber LSD S Details Machine no. 1770 Year of manufacture 1984 Height 1,800 mm Width 1,700 mm Length 2,600 mm Bed width 500 mm Bed height 850 mm Bed length 1,600 mm Face Plate Ø 900 mm Forkardt chuck Ø 400 and 500 mm possible (by arrangement) Tailstock MK4 mount max. workpiece lengths 1,000 mm Turning diameter over bed 920 mm Center height 460 mm Turning steel holder will be added

turning diameter: 125 mmturning length: 560 mmswing diameter over bed slide: 250 mmturning speeds: 30-3000 U/mintotal power requirement: 10 kWweight of the machine ca.: 1.5 tdimensions of the machine ca.: 2 x 2 x1.5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 300 mm Center width: 1000 mm Circumferential Ø: over bed 610 mm Spindle bore: 71 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: approx. 11.2 - 1800 rpm Feeds: longitudinal/flat 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Space requirement: 2900 x 1450 x 1750 mm

Machine Type: Lead and Pull Spindle Lathe Manufacturer: MATRA Model No.: D10 Year of Make: 1975 Condition: very good Offer type: used machine Specifications Tip height: 200 / 220 mm Center width: 1600 mm Spindle bore: 52 mm Speed range: 26 - 2000 rpm Drive: 3.2 / 4.0 kW Remark: a lot of accessories Weight: 1500 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

Tip height: 205 mm Center width: 1500 mm Circumferential Ø: over bed 410 mm Spindle bore: 47 mm Spindle holder: size 6 Pick-up cone tailstock: 4 MK Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/flat 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Space requirement: 2800 x 1100 x 1600 mm Weight: 1330 kg

Lead and Pull Spindle Lathe OPTIturn TH 3309D Technical details and features: Manufacturer: Optimum Model: OPTIturn TH 3309D Year of construction: 2024 Condition: New machine Shipping time: Immediately available (subject to prior sale) Dimensions and weight: Length (product): approx. 1685 mm Width/depth (product): approx. 745 mm Height (product): approx. 1590 mm Weight (net): 512 kg Areas of work: Tip height: 165 mm Center width: 830 mm Circumferential diameter over machine bed: 330 mm Circumferential diameter over face slide: 208 mm Swivel length in the bed bridge: 430 mm Range: Number of speed ranges: 16 Speed range: 70 – 2000 rpm⁻¹ Electrical data Power drive motor: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/rod passage diameter: 38 mm Steel holder mount ...

Optimum Optiturn TZ 4V Archive Image YOC: 2017 Areas of work: - Center height: 200 mm - Center width: 800 mm - Circulation diameter over machine bed: 400 mm - Rotation diameter over face slide: 245 mm - Bed width: 260 mm Range: - Number of speed ranges: 2 - Speed range: 50 – 3000 rpm⁻¹ Electrical data: - Power drive motor: 5.5 kW - Operating mode: S6 - Duty cycle: 60 % - Connection voltage: 400 V - Mains frequency: 50 Hz Cooling lubricant system: - Coolant pump power: 0.125 kW - Tank capacity: 20 l Engine(s): - Drive motor stages: 2 Standards and approvals: - Standard: DIN EN 55011 - EMC class: C3 Tailstock: - Recording: MK 3 - Quill stroke: 110 mm - Quill diameter: 50 mm Spindle: - Spindle holder: DIN ISO 702-1 No. 5 Form A2 - Spindle bore/rod passage diameter: 52 mm - Spindle cone: MK 6 Gradients: - Pitch Metric: 0.2 – 14 mm/ ...

turning diameter over bed: / mmturning diameter over slide rest: / mmturning length: / mmtotal power requirement: / kWweight of the machine ca.: / trequired space: / mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 6000 mm Height of centers 400 mm Max diameter on the bench 800 mm Max diameter on the carriage 520 mm Max diameter in the recess 1100 mm Bar passage 130 mm Undercarriage stroke notes 340 mm TURRET Standard BENCH Max weight between tips 3500 Kg Max weight on steady rests 4500 Kg Pallet width 520 mm TAILSTOCK Steerer diameter 115 mm Steerer stroke 380 mm Cone cm6 HEAD Spindle power 25 Kw Spindle speed 5/1000 Rpm 11 cam-lock spindle attachment Spindle torque 560 Nm GiVi axis display measurements Self-centering 500 Use and maintenance books Yes Wiring Diagrams Yes Protections yes Ready for availability Visible in the warehouse in operation

Digital Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Pinacho Lathe S-90/180 - With digital display - Width: 200 cm - Depth: 85 cm - Height: 160 cm - With operating instructions Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

turning length: 3500 mmturning diameter: 1000 mmturning diameter over bed: / mmweight of the machine ca.: ca. 8,5 tincluding 2 lynettes and large face plateThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Equipment of the machine: 3-jaw chuck D=400 mm, multifix steel holder C, coolant device, rapid traverse, 3-axis digital display, speed infinitely variable in three gear stages, speed digitally displayed

4 Cheek chuck Röhm used very good condition as described diameter 245 mm with adapter plate slight surface rust otherwise very good condition Little used Shipped on pallet 60 €

: . : 1990 centre distance: 1400 mm: 505 mm digital readout: . bed bridge: . tool adaptor: multiple Aufnahme weight of the machine ca.: 2,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Swing over the bed: 1250mm Max length of the workpiece: 10000mm Max mass of the workpiece at machining between centres with rest: 10000kg Height of the cutting tool set in tool holder: 50mm

Offer 25088 Specifications: - Largest turning diameter - over bed 460 mm - via face slide 258 mm - over bridge 785 mm - Center width 1000 mm - Traverse slide travel 290 mm - Spindle holder D 1 - 8 - Spindle bore 58 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 180 mm - Spindle speeds 20 - 2000 rpm - Rapid traverses X / Y - with: - 2 axis digital display - Multifix steel holder with 5 inserts - 3 cheek chuck -one. Tailstock - Coolant device - Drive 400 V / 5.5 kW - Space requirement approx. W 1900 x H 1750 x D 1050 mm - Weight approx. 1900 kg

turning diameter over bed: 270 mmturning diameter over slide rest: 130 mmturning length: 500 mmspindle turning speed - stepless: 40-3000 U/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1.5x0.8x1.7 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 270 mmturning diameter over slide rest: 130 mmturning length: 500 mmspindle turning speed - stepless: 40-3000 U/minweight of the machine ca.: 1 tdimensions of the machine ca.: 1.5x0.8x1.7 mDigital read-out HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lathe Schaublin 135 Tip width: 630mm Tip Height: 135mm Spindle bore: 40mm Spindle speeds: 45-3000 With a set of C5 collets Collet closer with lever Foot brake Taper Rotary Device 4-jaw twist drill chuck 200 3-jaw chuck Forkhard Automatic feed Star Wheel Tailstock with 2 Speeds Spindle speed adjustable via variator Spindle Lenase Camlock D1-4 Cleaned and function-checked New variator belts (original) All measurements allowed

Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition