used High Precision Turning Machines (Lathes) for sale

AVIA AVIATURN 35 CNC turning center was built in 2022 in Poland. The machine, designed for precision machining of workpieces with a maximum diameter of 350 mm, has been equipped with many state-of-the-art solutions and high-quality components that ensure excellent turning results. The workspace includes, among others, a 12-position turret and a reliable spindle driven by a belt drive with encoder. The AVIAturn 35 CNC lathe is also distinguished by its richly ribbed, single-piece cast iron bed. The bed, which is inclined at 35°, effectively dampens all vibrations and oscillations, resulting in, among others, improved workpiece surface quality and increased cutting tool life. The machine’s extensive equipment includes, among others, a hydraulically movable tailstock, a tool probe and a SIEMENS CNC control in its most powerful version with a wide range of built-in fixed cycles and 16  ...

BIGLIA B56 S2M CNC lathe was built in 1998 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, distinguished by its high precision, reliability and repeatability, is an excellent choice for many industries, such as the automotive and aerospace industry. Workpieces with complex geometries are machined inside a large work space by means of two spindles and two turrets. This solution significantly speeds up production time and reduces machine downtime to a minimum. All this is complemented by the intelligent FANUC CNC control, which allows the creation of advanced machining programmes in just a few steps. The BIGLIA B.56/S2M CNC turning center weighs 6750 kg. Technical specifications of the BIGLIA B56 S2M lathe - CNC controller: GE FANUC Series 18i-T - maximum workpiece diameter: 560 mm - maximum workpiece length: 1000 mm - feed in the X/Z axis: 250/500 mm - number of spindles:  ...

CITIZEN CINCOM M32 CNC lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine, which is a combination of high performance and precision, enables to perform even the most complex machining of workpieces in 8 axes. All machining processes, i.e. precise drilling, threading and turning are performed inside a fully illuminated work area by means of cutting tools taken from 3 tool stations. The high thermal stability bed inside effectively reduces the influence of heat, increasing the service life of all components and tools. The CITIZEN CINCOM M-32 CNC lathe is offered with an extensive range of equipment, which includes, among others, two spindles (main spindle and sub-spindle) and an FMB bar feeder. All this is complemented by an intelligent CNC control, which allows, for example, self-diagnosis of the machine or program backup. The CITIZEN M32 swiss-type lathe weighs 32 ...

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

CITIZEN M32 V CNC sliding head lathe was built in 2006 in Japan by CITIZEN MACHINERY CO., LTD. The machine, designed for precision machining of workpieces with complex geometries, is distinguished by the use of a number of state-of-the-art solutions aimed at increasing overall production efficiency. These include among others two reliable spindles with C axis and capacious tool stations. What’s more, a specially designed bed with high thermal stability perfectly reduces the impact of heat, increasing the service life of all components and tools. All this is complemented by an intelligent MITSUBISHI CNC control with many useful functions. The CITIZEN M32V swiss-type lathe weighs 3200 kg. Technical specifications of CITIZEN M32 V CNC lathe General data - maximum turning diameter: 32 mm - turning length in one stroke: 320 mm - maximum turning length: 600 mm - maximum bar length: 3 ...

Dimensions: - Length: 2311.4 mm - Width: 1600.0 mm - Height: 1655.0 mm - Weight: 2900.0 kg Turning Specifications: - Turning Length: 305.0 mm - Turning Diameter: 320.0 mm - Diameter Above the Bed: 510.0 mm - Diameter Above Transversing Slide: 290.0 mm - Length Between Centers: 23.0 mm Axis Movement: - X-axis Travel: 175.0 mm - Z-axis Travel: 330.0 mm Workpiece Capacity: - Maximum Workpiece Weight: 130.0 kg Spindle Details: - Spindle Bore: 53.3 mm - Spindle Motor Power: 15.0 kW - Turning Speed: 6000.0 rpm Tooling: - Number of Turrets: 12 - Number of Tools on Turret: 12 - Number of Rotating Tools: 12 Common Applications: The Lynx 220LC is widely used in precision machining industries for producing complex components with high accuracy. It is suitable for manufacturing parts in automotive, aerospace, and general engineering sectors. Turning length 305 mm Turni ...

achine details Stock-No. 1105-04069 Type of machine CNC Turning- and Milling Center Make DOOSAN DAEWOO Type PUMA 700 LM b Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin KORREA Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details turning diameter 900 mm turning length 3050 mm control FANUC 21 i TB swing dia. 1030 mm Standard Turning Diameter 750 mm Bar Material Dia. 165 mm Spindle bore 110 mm Travel -X Axis 471 mm Travel -Z AXIS 2100 mm Rapid Travel - Longitudinal/Face 15/ 20 m/min Spindle RPM 3000 1/min spindle drive 45 kW turret stations / rotary tool stations 12 / 6 BMT 85 speed of driven tools 3000 1/min total power requirement 62.2 kVA Weight of the machine approx. 22.2 t dimensions of the machine approx. 6.1 x 2.2 x 2.2 m Accessories Chip conveyor YES Parts and total counter Tool holders  ...

GILDEMEISTER GLD 20 5A CNC sliding head lathe was built in 2001 in Italy by GILDEMEISTER Italiana S.p.A.. The machine is designed for even the most complex machining of workpieces with complex geometries. In order to achieve maximum precision, the workspace is equipped with many reliable components of excellent technical specification. These include among others two high-speed spindles and a rapid, 7-position turret. Daily work, on the other hand, is facilitated by the intelligent FANUC CNC controller, which has an intuitive interface and many useful functions. The offered GLD 20-5A swiss-type lathe weighs approximately 2000 kg. Technical specifications of the GILDEMEISTER GLD 20 5A CNC turning center General data - number of axes: 5 - maximum turning diameter: 20 mm - minimum turning diameter: 3 mm - turning length: approx. 70 mm - rapid traverse in all axes: 12 m/min - maximu ...

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

This compact footprint lathe is equipped with a powerful 20hp vector drive spindle, which gives ample high torque and speed, allowing for efficient cutting of various types of materials. The spindle turns at a max speed of 3000 RPM, providing a wide range of turning applications. It has a Kitagawa B-208 3-Jaw hydraulic chuck with a 2.06 Bar Capacity. The Turret is equipped with 8 tool stations. Sporting high-precision linear guides, and an automatic lubrication system. It has the user friendly Haas control with versatile options such as conversational programming and graphic simulation. Working great, regularly maintained, under power, and available immediately!

HAAS ST-30 CNC turning center was built in 2012 by the renowned American brand HAAS AUTOMATION INC. The machine, designed for precision machining of workpieces with a maximum diameter of 381 mm, is equipped with among others a 12-position turret, a reliable spindle and a 254 mm chuck. The compact design and the emphasis on high turning productivity and precision make the machine an excellent choice for any industrial facility. So far, the machine has mainly been used for machining aluminium castings and has been serviced on a regular basis. The HAAS CNC lathe weighs 4944 kg. Technical parameters of the HAAS ST-30 lathe - CNC controller: HAAS - maximum turning diameter: 381 mm - maximum turning length: 826 mm - maximum part deflection: 533 mm - maximum bar diameter: 76 mm - feed in the X/Z axis: 239/826 mm - rapid traverse in X,Z axis: 24 m/min - maximum spindle rotational spee ...

MAZAK QUICK TURN NEXUS 100MS CNC lathe was built in 2005 in Japan by YAMAZAKI MAZAK CORP. The machine, designed for precision machining of workpieces with a maximum diameter of 280 mm, is distinguished by the use of reliable components with excellent technical parameters, such as two spindles (main spindle and sub-spindle) and a 12-position turret. The machining process is performed inside a large, fully illuminated workspace by means of a powerful spindle with an integrated motor design that minimises vibrations at high speeds. This is all complemented by an intelligent CNC control that simplifies daily work by allowing even the most advanced machining programmes to be created in just a few steps. The MAZAK QTN-100MS CNC turning center weighs 4100 kg. Technical specifications of the MAZAK QUICK TURN NEXUS 100MS metal lathe - CNC control: MAZATROL 640T NEXUS - maximum turning diamet ...

STAR ECAS 32T CNC lathe was built in 2007 in Japan by STAR MICRONICS CO.,LTD. The machine, which combines high performance and precision, has been designed to improve the machining of even the most complex workpieces. Its extensive machining capabilities facilitate complex machining processes such as turning, drilling and threading, both on the front and back of the workpiece. This makes the STAR MICRONICS ECAS 32T CNC lathe indispensable in many industries, such as the automotive and aerospace. The STAR ECAS-32T swiss-type lathe is equipped with, among others, 11 axes, two spindles (main spindle and sub-spindle) and capacious turrets that can accommodate many tools for any type of machining. The maximally rigid design additionally ensures incredible process stability, which is essential to achieve excellent precision and quality of the produced parts. The total weight of the machine  ...

TSUGAMI B0205E CNC sliding head lathe was built in 2011 in Japan by TSUGAMI CORP. The machine, designed for precision machining of workpieces with complex geometries, is the perfect solution for industries i.e. automotive or aerospace. To ensure maximum performance even during the most intensive challenges, it has been equipped with a range of reliable components of excellent technical parameters. Inside the large work space, there is among others a 21-position tool magazine and two powerful spindles, which significantly speed up the overall production time. All this is complemented by an intelligent FANUC CNC control with an intuitive interface. The TSUGAMI B0205E-II swiss-type lathe weighs 1700 kg. Technical specifications of the TSUGAMI B0205E CNC turning center General data - number of axes: 5 (X1,X2,Y1,Z1,Z2) - rapid traverse in the X1 axis: 24 m/min - rapid traverse in the X ...

CK6146ZX CNC lathe was built in 2013. The machine, designed for machining rotating solids, i.e. cones, shafts and spheres with a maximum diameter of 460 mm, offers excellent precision and repeatability of the manufactured parts. The machining process is performed inside a large workspace, by means of quality cutting tools and a spindle with an optimally adapted speed range. The design, in turn, ensures high stability of machining by effectively eliminating any vibration and oscillation generated during the turning process. All this is complemented by the intuitive FANUC CNC control, which enables the creation of advanced machining programmes in just a few steps. The CK 6146ZX metal lathe weighs 2800 kg. Technical specifications of the CK6146ZX flat bed CNC lathe - CNC controller: FANUC Series 0i Mate-TD - turning diameter above the bed: 460 mm - turning diameter over slide: 240 mm  ...