used Mug filling machines for sale

Length 9m width 98 lane width 90 We have a wide selection of machines, we invite you to see other ads. We also invite you to our website

FULL POWDER FILLING AND PACKAGING LINE COMPLETE WITH ALL CONVEYORING, GENERATORS AND 4 PALLETS WORTH OF SPARES. USED FOR POWDERED SUGAR AND FLOUR CONSISTING OF: CARTON ERECTING MACHINE TO POWDER FILLING MACHINE TO CHECK WEIGHER TO CARTON SEAL MACHINE TO LID APPLICATION MACHINE PLEASE CONTACT FOR MORE INFORMATION

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

Product number: 2615 Type: IRB1200-7/0.7 Serial number: 1200-500061 Year of construction: 2014 Capacity: max 7 kg Reach: 0.7 m Dimensions: 2350 x 2100 x 1800 mm IRC5 controller Including 4 way flow divider 2 pc. denester 1 pc. filling station 1 pc. outfeed slide and conveyor

QT 660 | FILLING MONOBLOCK ACMA GD | MIGNON Year: 2004 Speed: 2.000 Bph Model: KARMA 16-3LP Direction: Clockwise Gravity filling Number of valves: 16 Capper: Screw caps Caps elevator included Bottle formats: 30 ml - VETRO - PET Safety protections

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally ...

SECOND HAND BUTTER PRODUCTION AND PACKAGING MACHINERY Year of manufacturing: 2008 Condition: Good used condition. - Continuous butter machine Make: AHLBORN 311/1000 Capacity: 1000 kh/hr Gear revised completely in 2018 - hardened gears Exit starts complete changed in 2020 Exit tube 250 gr Exit tube 25 blocks - Rotary forming and filling machine Make: Benhill 8538 Format: 250 gr Exit conveyor: 250 gr - 2 packers from 250 gr to 1000 gr - 4 packs - Mikrofix

ALEXANDERWERK ROLLER COMPACTOR, MODEL BT 120 PHARMA Year of construction: 2016 With a benchtop design providing a throughput of up to 8 kg/h (based on lactose). Specially designed for use in research and development areas. Can be used for granulation of biological compounds and active ingredients. TECHNICAL DATA Roller size Roller diameter: 120 mm Roller width: 25 mm Production details Maximal pressure force: 20 kN/cm Maximal roller gap: 4 mm Maximal roller speed: 15 rpm Throughput, continuous operation: up to 8 kg/h (lactose) Size Dimensions (H x W x D): approx. 621 mm x 897 mm x 977 mm Weight (incl. control system): approx. 425 kg The modular design guarantees fast changing and cleaning of all working tools and meets the requirements for flexible working Due to of its modular design, the process technology of the machine can be completely disa ...

Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Program memory for 99 filling programs Electric power: 4 KW Machine dimensions in cm: Width: 60 Length: 110 Height: 160

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

We offer a used stainless steel tank from Alfa Laval, built in 1977, in good condition. Capacity 15,000 liters. Agitator with setting option slow/fast and pulse/pause. Spout with pneumatic valve. There is a spout, which was also used for filling. The tank is CIP capable, it has integrated spray balls. Previously used as a raw milk tank. We offer a used stainless steel tank from Alfa Laval, built in 1977, in good condition. Capacity 15,000 litres. Agitator with 'slow/fast' and 'pulse/pause' settings. Outlet with pneumatic valve. There is an outlet that was also used for filling. The tank is CIP-capable and has integrated spray balls. Previously used as a raw milk tank.

We offer a used stainless steel tank from Alfa Laval, built in 2009, in good condition. Capacity 3,000 liters. Tank lying. propeller agitator. Own cooling circuit via refrigerant. Own cleaning program (start manually). Previously used as a (flow) milk tank in front of a filling machine. We offer a used stainless steel tank from Alfa Laval, year of manufacture 2009, in good condition. Capacity 3,000 litres. Tank horizontal. Propeller agitator. Own cooling circuit via refrigerant. Own cleaning programme (manual start). Previously used as a (continuous flow) milk tank in front of a filling machine.

1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.

Filling monoblock ALFATEK 15.1 Year: 1993. Speed: 2.000 bph. Direction: Clockwise. Filler 15 valves – gravity filling. Single head corker – natural straight cork. Safety protections.

Filling monoblock ALFATEK 15.1 Year: 1990. Speed: 2.000 bph. Direction: Clockwise. Filler 15 valves – gravity filling. Single head corker – natural straight cork Safety protections.

QT 658 | FILLING MONOBLOCK ALFATEK 15.1 ISO Year: 2007 Speed: 2.800 bph for still wine 1.500 bph for champagne Direction: clockwise Filler 15 valves | Isobaric Filler Self-lveling Single head corker Natural straight cork Mushroom cork Safety protections Macchina revisionata

Filling monoblock ALFATEK | 16.20.4 Year: 2000 Speed: 3.500 bph Direction: Clockwise Rinser 16 clamps Filler 20 valves (oil) Capper 4 heads Safety protections.

Filling monoblock ALFATEK 24.4 Year: 2003 Speed: 4.000 bph Direction: Clockwise Filler 24 valves Corker 4 heads – Natural straight cork Safety protections

Filling machine ALFATEK 28 valves isobaric – 5.000 bph: Year: 2004 Producer: ALFATEK Speed (BPH): 5.000 bph Direction: Clockwise -RECONDITIONED MACHINE 1) Isobaric filler Alfatek 28 valves. 2) Complete of self levelling. Code T 10

Filling monoblock ALFATEK 3/9/1 - oil Year: 2010 Speed: 1.000 bph da 750cc Direction: Clockwise Station with 3 heads for gas injection and empty system Filler with 9 valves Pre-evacuation air before filling by pump and nitrogen Single head capper Aliminum screw cap Ø 31.5 x 24 H Safety protections.

bottling line – ALFATEK Year: 1994 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps Double treatment Filler 15 valves Gravity filling Single head corker Natural straight cork Safety protections

Bottling Line ALFATEK – 3.600 bph Year: 1996 – 2009 Speed: 3.600 bph Direction: Clockwsie Used rinser KOMPASS Year: 2009 Speed: 5.000 bph Direction: Clockwsie 20 clamps Fixed nozzle Single treatment Filling monoblock ALFATEK 24.4 Year: 2003 Speed: 4.000 bph Direction: Clockwsie Filler 24 valves Corker 4 heads – Natural straight cork Labeller NEWTEC 9T Year: 2015 Speed: 6.000 bph Direction: Clockwise Nr.2 cold glue stations Nr.1 adhesive station Box forming machine APE Year: 1996 Speed: 900 C/H Gluer NORDSON Case packer APE Year: 1996 Speed: 3.600 bph Box closing machine SIAT Year: 1996

Filling monoblock ALFATEK – Refermented beer Model: ELVIRA LP 12.6.15.1 Year: 2013 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps 6 heads for deaeration. Filler 15 valves – low pressure (0,1 – 0,2 BAR) Single head corker – Crown cap 26 mm and 29 mm (both equipment available) Available bottle formats: 0.33 lt cylindrical, 0.75 lt collio, 1.5 lt collio, 0.33 lt truncated cone Safety protections.

filling monoblock ALFATEK | TRIBLOC ELVIRA Year: 1999 Speed: 2.000 bph Direction: Clockwise Rinser 12 valves Filler 12 valves Single head corker | Natural straight cork Capper BERTOLASO | stelvin cap Safety protections

Bottling line ALFIERI | PET Year: 1996 – 2001 Speed: 8.000 bph Direction: Counterclockwise Filling monoblock ALFIERI 24.24.8 | 2001 Rinser 24 clamps Filler 24 valves Capper 8 heads AROL Labeller P.E. | 1996 8 heads Nr.1 HOT MELT station Saturator METALOCAIMA mod. RSP

Allfill SHA15 Auger filler Refurbed in 2023, touch screen control, stainless, auger filler variable speed or continuous fill, 75Kg stainless hopper with 50mm stainless screw discharge, with level detection, with foot pedal, Previously used inline with elevator screw for filling the hopper, 3Ph

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

FOR SALE – AMADA HFB 125-40 PRESS BRAKE – USED ZOTOFF Company – Used sheet metal equipment We offer for sale an AMADA HFB 125-40 hydraulic press brake, in excellent working order, ideal for precision industrial sheet metal work. ✅ Technical characteristics: Model: AMADA HFB 125-40 Year of Manufacture: 1992 Bending force: 1250 kN Maximum stroke: 180 mm Supply voltage: 380V / 50Hz Installed power: 11 kW Current rating: 24 A Number of phases: 3 Weight: 10,000 kg Serial Number: HFB012540H20610 Robust, reliable machine perfectly suited to mechanical-welding, boilermaking or metal parts workshops. Other sheet metal machines available (equivalent examples): BYSTRONIC Beyeler PR 150T – 150 tons, CNC TRUMPF TrumaBend V85S – 85 tons, numerical control LVD PPEB 135/30 – 135 tons, with Easy-Form control COLLY MTP 125T – 125 Ton Hy ...

REF-0 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

AOKI One step PET injection stretch blow molding machines for jar

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5 - 16 Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out an ...

API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm;  ...

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

THE LINE IS FOR SALE ONLY AS A WHOLE PIECE. THE BANK THAT OWNS THE LINE DOESN'T AGREE TO SELL THE MACHINES INDIVIDUALLY! Apple juice and concentrate production line consisting of: 1). 3-stage evaporation station made by APV. The station is equipped with an aroma trap. Max. capacity 12.000 l / h of evaporation on the juice. 2). Ultrafiltration station made by APV, PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10.000 l / h. Temperature 50 C. Pressure 5.5 Bar. 24 KW motor. 19 membranes dia. 12.5mm 3). Piston press made by Zamet, capacity 5.000 l / h. 2 pieces available. 4). Belt press made by AMOS, model Apex 1600. New 1997.

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 f ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices sh ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 500-170, Golden Edition, injection moulding machine. Fitted with a 35mm plasticising unit and the Selogica controller. It is one of the most popular machines on the used market and Arburg have done exceptionally well with the combination over the years. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarant ...

We can offer Arburg injection moulding machines, 220,270,420 etc.all goog condition.Serious buyers contact us.

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery und ...

Undergoing refurbishment at our headquarters in Northamptonshire is this Arburg 420C 1000-290 injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs o ...

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and ...

AT Sack fillers Midget Linear weigher and filler Serial: 08MM-3-22 Semi automatic single head linear gross weighing and filling machine, weight range 20g - 6Kgs, up to 1000Kgs per hour, compact design, simple to set up, ideal for packing granules, flakes, pellets, beads and much more, 1Ph

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

Audion 520 MV-2 Benchtop Welding Machine Power Sealer Packaging Machines – used -: Price ex location: 3.000.-€ (net)! Stainless steel vacuum sealer for vacuuming and/or gassing flexible plastic packaging. Manufacturer: Audion Type: 520 MV-2 Year of Make: 2011 230V, 10 Amp, 850 Watt Dimensions: 590x232x487 mm Venturi pump: 11.3m³/h Weld seam (LxW): 520 x 5 mm Digital control panel Multicycle Compressed air: >6 bar stainless design Fumigation device Condition: good Available: immediately Location: Frankenberg camp / Saxony

1 AUTEFA loose stock/flock stampfing press type 6.62 for stamping lose flock into materila carriers for dyeing / bleaching machines, with 2 stampfing arms with motorized rotational carrier support . complete with electrical panel

1 bottle carton packing machine and carton palletizer matched to the bottling capacity of the upstream Krones bottling machine with 12,000 bottles per hour for 6 bottles in 1 carton Manufacturer: Autefa automation GmbH Friedberg Germany Masch. No. 500577 Type: PP-60 Year of construction: 2010 Bottle Carton wrapping machine and cardboard palletizer plant matched to the Krones bottle filling machine with 12.000 unit per hour. Packaging system: 6 bottles in 1 carton Manufacturer: Autefa automation GmbH Friedberg Germany Machine No. 500577 Type: PP-60 Year of construction: 2010

Filling monoblock AVE 12.12.1 | oil Year: 2000 Speed: 2.000 bph Direction: Clockwise Rinser 12 clamps Filler 12 valves Single head capper Screw cap Safety protections.

filling monoblock AVE – MILK PET Year: 2011 Speed: 7.000 bph Direction: Clockwise Rinser 20 clamps – grip on the neck Filler 20 valves Capper 5 heads – plastic cap Internal washing treatment Safety protections.

bottling line AVE – wine • Speed: 3.200 bph • Direction: Clockwise • Depalletizer OMA – 2002 o Model: DEPALBLOCK • Filling monoblock AVE 16.16.4 - 2000 o Rinser 16 clamps o Filler 16 valves o Corker 4 heads – natural straight cork o Capper BERTOLASO STELVIN - 1985 • Dryer EUROPOOL - 2005 • Capsuling machine ROBINO&GALANDRINO – 2000 o Model: FENIX 2 • Labeller 8 teste KOSME – 2005 o 3 cold glue stations o 2 adhesive stations • Box forming machine APE MODULO F – 2002 • Case packer APE INCA 1200 – 1997 • Box closing machine SIAT XL 33 P C