bore capacity in steel (diameter): 22 mmthroat: 270 mmspindle turning speed - stepless: U/minweight of the machine ca.: 1.1 tdimensions of the machine ca.: 1.2 x 1.2 x 2.2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread capacity: -M 3,5 thread pitch: x mmthroat: 100 mmtable-size: 180x180 mmweight of the machine ca.: 0.140 twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 350 x 250 x 256 mm - Control: AGIEVISION - Dimensions (long x wide x high): 2.215 x 2.215 x 2.220 mm - Weight: 3.600 kg - Maximum power consumption: 9 kVa - Display: 15 LCD - Type of EDM : WIRE - Max. workpiece weight: 200 kg

An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 700mm/400mm/330mm, table dimensions X/Y: 850mm/400mm, speed: 12000rpm, tool holder: BT-30, rapid traverse: 60m/min, tool positions: 21, max. tool weight: 3kg, max. tool length: 200mm, positioning accuracy: +/-0.01mm, repeat accuracy: +/-0.003mm. Machine dimensions X/Y: approx. 2100mm/2550mm, weight: approx. 2400kg. The spindle is defective and must be replaced. The encoder cable is also defective. Documentation available. On-site inspection is possible.

: 40-1080 tool taper: MK 5 weight of the machine ca.: 2 tfeed: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Drilling capacity: 40mm, spindle mount: MK4, drill chuck: 1mm-13mm, throat depth: 250mm, quill stroke: 160mm, table dimensions X/Y: 620mm/470mm, column diameter: 120mm, spindle speed: 1420rpm. Machine dimensions X/Y/Z: approx. 900mm/725mm/1800mm, weight: approx. 615kg. The on/off switch of the machine must be replaced. An on-site inspection is possible.

Offer 25173 Specifications: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Tapping device ST 60 to M 24 - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Projection 330 mm - Table with 2 T-slots 610 x 430 mm - Max. distance table – drilling spindle approx. 665 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Drilling spindle speeds infinitely variable 65 - 2000 rpm - Digital speed display -Lighting - Coolant device - E. footswitch - Drive 400 V / 0.6 / 1.8 kW - Space requirement approx. W 1000 x H 2050 x D 1150 mm - Weight approx. 470 kg

Column Drill Manufacturer: Alzmetall Model: AB 35 S Holder MK 3 incl. vise

Drilling capacity steel/GG: 32/45 mm Spindle holder: 4 MK Projection: 300 mm Table size: 445 x 445 mm Quill stroke: 160 mm Spindle speeds: 57 - 1340 rpm Feeds: 0.1, 0.2, 0.3 mm Drive motor: 380 V, 1.4/2.2 kW Space requirement: 920 x 620 x 1880 mm Weight: approx. 440 kg

Description Drilling Machine, Stand Drilling Machine, Column Drilling Machine, Column Drilling Machine -Table size: 400 mm - Spindle holder: MK4 -Projection: 320 mm -Speeds: 80-700 rpm -Columns: Ø 160 mm -Spindle stroke: 175 mm -VIP gearbox -Feed: 0.09-0.28 mm/rev -Tachometer defective -Dimensions: 1100/500/H1960 mm -Weight: 650 kg

Drilling capacity steel/ cast iron: 35/45mm, length: 1100mm, width: 600mm, height: 2050mm.

bore capacity in steel (diameter): 40 mmthroat: 340 mmbore stroke: 170 mmtable surface area: 560 mm0: 80 - 720 U/minfeed: 0,09 - 0,16 - 0,28 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,65 tDrill with:FeedCoolant pumpNew drill chuckThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mmthroat: 325 mmbore stroke: 170 mmtable surface area: 730 x 590 mm0: 130 - 1200 U/minfeed: 0,09 - 0,16 - 0,28 mm/Utool taper: MK 4 total power requirement: 1,8 kWweight of the machine ca.: 0,7 tdimensions: 1,2 x 0,8 x 2,15 mDrill with:Feed2 gearsLeft/right rotationFoot switchMachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25095 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1 50 - 175 rpm - Level 2 175 - 640 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance between machined base plate and drilling spindle approx. 1250 mm - Coolant device -Lighting - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

bore capacity in steel (diameter): 40 mmthroat: 345 mmbore stroke: 200 mmtable surface area: 720 x 560 mm0: 60 - 765 U/minfeed: 0,15 - 0,2 - 0,3 - 0,36 mm/Utool taper: MK 4 total power requirement: 3,0 kWweight of the machine ca.: 0,4 tDrill with:Feed2 gearsLeft/right rotationFoot switchCoolant pumpMachine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Manufacturer: Alzmetall Type: AB 40 ST Spindle: MK 3 Bgtf39Yocw Table dimensions: 745 x 460 mm Machine can be viewed under power

Alzmetall AB 40 SV Price 9500,-€ Drilling capacity : 45mm Spindle : MK 4 Drilling capacity 45mm Spindle MK 4 Speed 65-1750 rpm Feed rate Yes 0.1 - 0.2 - 0.3 Drilling stroke 165mm Connection 50Hz 380V Motor 2.4KW Machine weight approx. 500kg

: ja feed: 80 - 800 m/min: 1848 weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24479 Specifications: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 385 mm - Table with 2 T-slots 610 mm -Max. Distance between table and drilling spindle approx. 820 mm -Max. Distance base plate – drilling spindle 1325 mm - Column diameter 220 mm - Feeds 0.10 - 0.14 - 0.20 - 0.28 - 0.40 mm/rev - Drilling spindle speeds infinitely variable 85 - 1620 rpm - Drive 380 V / 4 kW -Lighting - E. footswitch - Space requirement approx. W 750 x H 2350 x D 1500 mm - Weight approx. 1350 kg

Speeds infinitely variable from 40 - 800 rpm 4 drill feeds . Clearly good original condition

bore capacity in steel (diameter): 25 mmthroat: 295 mmbore stroke: 160 mmspindle turning speed - stepless: 65-1750 U/minfeed stepless: 0,15 mm/Umorse taper: MK3 table-size: 510 x 400 mmtotal power requirement: kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: TBH 1,00 x 0,50 x 1,85 m- automatic feed- Work light- drill chuck- Operating manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alzmetall AB 3 ES - Column Drilling Machine -Drilling capacity / steel 35mm -Projection 280mm -Drilling stroke 180mm -Recording MK 3 -Table size 600x470mm -Stepless speed regulation -Drilling depth stop -Chuck -Documentation Dq2Nwr Dimensions: LxWxH1.2x0.8x2.1 meters / Weight 550 kg

bore capacity in steel (diameter): 65 mmthroat: 390 mmbore stroke: 250 mmspindle taper MT: 5 table-size: 880x670 mmspindle turning speed - stepless: 40-800 U/minweight of the machine ca.: 1.2 twww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity: 35mm, mounting: MK4, speed: 1400 rpm, feed: 0.4mm/rev. On-site inspection is possible.

number of spindles: - bore capacity in steel (diameter): - mmbore stroke: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity steel/cast iron: 32mm/40mm, spindle mount: MK4, throat depth: 322mm, quill stroke: 180mm, speed: 5000 rpm, table dimensions X/Y: 500mm/370mm, column diameter: 145mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/2350mm, weight: approx. 520kg.

Condition of the machine: We are selling a reliable and in good technical condition ALZRAPID 32. The motors of the drilling spindle and the axles were re-mounted and cleaned. The machine is ready for demonstration under power and available at short notice. For the technical data, please refer to the following description: Technical data: Spindle speeds: 102/152/204/250/304/408/ 500/608/816 /1000/ 1216/2000 Short spindle: MK4 Drilling capacity steel E 335 (St 60) 1): 32 mm Drilling capacity cast EN-GJL-200 (GG 20): 32 mm Motor: 1500/3000 rpm Accessories: - Digital display with glass scales -Tapping - R 0 L - Adjustment -Vice - Documentation and operating instructions

bore capacity in steel (diameter): 28 mmthroat: 293 mmbore stroke: 140 mmtable surface area: 415 x 300 mmspindle turning speed range: 160 - 2250 U/minfeeds: 0,1 / 0,2 mm/Utotal power requirement: 1,9 kWweight of the machine ca.: 0,3 tdimensions of the machine ca.: m- machine out of teaching shop -Accessories: DRO for spindle speed and quill stroke, drill chuck RÖHM 1 - 13 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type: Alzmetall BAZ 26 Control: Heidenhain 426 Type: 3-axis machining center with chip conveyor Tool holder: SK 40 Tool magazine: 24 places / drum magazine Year of Make: 2003 Installation dimensions: length 4800mm x depth 3000mm (with control swivelled out 4000mm) x height 3000mm Axle travel: X=1200mm Y = 600mm Z = 800mm Weight: 8000kg Max. Spindle Speed: 9000rpm Rapid traverses in X, Y, Z: 40000mm/min. Tool cooling: External / internal cooling Status: Electrified / in production

Drilling capacity: 40 mmThroat: 870 mmSpindle taper: 0   SPECIFICATIONS Drilling capacity steel Ø  35 mm Drilling capacity cast iron Ø  40 mm Tapping MM 25 Spindle taper Mk  Mk 4 Spindle diameter Ø   60 mm Spindle travel  180 mm Max. distance spindle - table  80 mm Min. distance spindle - table   870 mm Floor / table area    700 x 600 mm Power2.2 kW Spindle speeds / ranges 65 - 1750 VARIO Rpm DIMENSIONS Length  1200 mm Width  800 mm Height 2400 mm  

Used machine in good condition. Available for immediate delivery. - Max. tool length: 300/225 [350/225] - Number of tool stations: 33 - Control: HEIDENHAIN ITNC 530 - Working area (X x Y x Z): 650 x 650 x 550 mm - C-axis: 360 ? - Max. tool weight: 10 kg - Operating hours: 51.651 - Axes: 5 - Power: installed max: 16 kW - Weight: 13.000 - Dimensions (long x wide x high): 2.345 x 4.250 x 2.600 mm

bore capacity in steel (diameter): 35 mmarm length: 700 mmworkpiece height max.: mmspindle taper MT: 3 spindle turning speed range: 100 - 1220 U/minfeeds: 0,125 - 1,25 mm/Uquill stroke: mmtotal power requirement: 1,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 1,5 x 0,8 x 2,3 mincluding cube 480 x 400 x 430mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drilling capacity in steel: approx. 28 mm Projection: 500 mm small/large distance between contact surface and drill quill: 1320 mm Quill stroke: 140 mm Spindle holder MK: 3 Table clamping surface: 700 x 850 mm Speeds: 100 - 1220 rpm Feeds: 0.1, 0.2 and 0.3 mm Spindle drive: 1.5 kW Space requirement: 1400 x 700 x 2050 mm

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Hello Here are a few pictures. Blind hole cylinders, e.g. for cylinders for chainsaws, were manufactured on the machines. I couldn't photograph the interiors of the machine at the moment, because the doors are locked and the machine is off. Each machine has a row of spindles at the top and bottom with different numbers of spindles. Just let us know how you feel about it. Appendix Group 4: Anger 4 - HCP1 Anger HCH 12/5 BA0910 2005 Anger 4 - HCP2 Anger HCH 12/5 BA1113 2013 Anger 4 - HCP3 Anger HCH 12/5 BA0913 2005 Anger 4 - Coolant cleaning system Knoll VRF 900/6000 201228263 2012 Anger 4 - Washer Erdmann KET-1-W1-LT 204-622 Anger 4 - Centrifuge STA S15 MC-04-0057 2004 Anger 4 - Robot 1 Kuka KR 16 687401 2013 Anger 4 - Robot 2 Kuka KR 16 687402 2013 Anger 4 - Ewab chain Anger 4 - HCP 1 - Scraper belt conveyor Knoll 450 K-1/280 200419526 Anger 4 - HCP 2 - Scr ...

Recording MK 3 Drilling capacity 30 mm Quill stroke: 200 mm Drill milling unit can be swivelled 45° on the left and right Automatic motorized feed for the X-axis Coolant pump

Drilling capacity: 80 mmRadius: 2781 mmSpindle taper: 76  

Machine vise ATS NC-200VH Year of construction 2024 Jaw width: 200 mm Jaw height: 63 mm Total height: 173 mm Total length: 700 mm Max. internal wingspan: 330 mm Max. wingspan outside:540 mm with pull-down function Clamping force: 45kN Weight: 81 kg Mint condition, unused Price per piece Delivery possible

CNC control: Heidenhain TNC 640, 19 touchscreen - Cabin floor made of stainless steel - Stainless steel cover under machine doors - Housing of the pumps - Chip rinsing system - Double-arm tool changer with 30 places - Direct drive 10,000 rpm - Complete coolant device (coolant nozzles distributed in a ring around the spindle) - Chip conveyor (auger) - Workspace lighting - 3 colors signal light - Compressed air and coolant gun - Full fairing - Tightening bolt ISO 7388/B Type B, 6 pcs. - Blow-out device (spindle) - Emergency stop, button and button, release tool on the spindle - Portable electronic handwheel - Limit switch - Transport device (for crane transport) -User guide - CE Declaration of Conformity Specifications: Workbench: Clamping surface: 1,200 x 550 mm T-panel: number/ width/ distance: 5/18/100 mm max. workpiece weight: 1,000 kg Travel X-axis:  ...

drill diameter:5,,,,40 mmdrilling length:600 mmlip angle:90-150 °total power requirement:4,5 kWweight of the machine ca.:0,8 tdimensions of the machine ca.:2-2-2 mCNC programmable according to ISOPoint angle 90-140 degrees, disc stroke x 80mm y 80mmgrinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpmGrinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1Avyac grind / 4 faces gr. Cross for deep drill

x-travel: 4.000 mmy-travel: 2.100 mmz-travel: 1.000 mmtaper ISO: ISO 50 Number of revolutions: 5.000 rpmtable-size: 4.020x2.010 mmtable weight: 12.000 KgControl: Heidenhein iTNC530 Tools place: 32 fachrapid taverse: 15.000 mm/mintotal power requirement: kWweight of the machine ca.: 39 tdimensions of the machine ca.: 10680x5600x5100 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 2x 800mm/600mm/600mm, speed: 4000rpm, table spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18000kg. Documentation available.

Vertical Horizontal Machining Center AXA, VHC3-4000, Control : Heidenhain iTNC 530, X-4000mm, 2 x 1750mm, Y-900, Z-950, Spindle : SK40, 100 - 12000rpm, swivel head infinitely variable pos. ATC 66 pos Table: 3200x900, right pos. Weight 18.5 to To be visited under power !

Vertical portal center with overhead guides AXA , VPC 50-U, 2004 Control: Heidenhain iTNC 530, Travels: X-pendulum stroke 2300, Y-1200, Z-700mm Spindle : SK50, 30-7500 rpm , Swivel head, ATC 60pos. NC rotary table 1100 x 1100mm, 69 KVA, weight 22to Y-ball screw defective / B-axis loses zero position VPC

Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355.

The BMV60+ redefines the standards for precision machining! The rigid structure, small footprint and precise spindle ensure consistently high quality of performance. The high speed and feed rate meet the criteria necessary for cost-effective processing. The arm tool magazine uses variable pocket coding. Linear guideways, variable speed AC spindle drives, and a digital drive CNC system are some of the standout features of this BMV60+ series machining center. Unique features: Rigid column technology Modular construction CAE-based optimal structural design for thermal stability T20 - 20 Tools Roof/Carousel Magazine Carousel Magazine Designed to adapt to different types of coolant and chip systems High-quality spindle on precision bearings eliminates vibration during heavy cutsModel BMV-60 Travel of the X-Y-Z axis 1050 x 610 x 610 mm Spindle per ...