used Universal Turning Machines (Lathes) for sale

Conventional turning machine ANSELMI MONOFAP 260Ea, Height centres: 260 mm, Distance between centres: 1500 mm, Bed width: 370 mm, Swing over crosslide: 320 mm, Spindle nose cam-lock din55029: 6 , Spindle speed: 2-1400 giri/1, Number of spindle speeds: 18, Spindle bore: 55 mm, Spindle motor power: 7,5 Kw, Tailstock quill diameter: 65 mm, Taper of quill mt: 4, Approx net weight: 2.500 Kg, Accessories: Steady rest, self centering chuck, quick change tools turret.

Parallel Lathe CAZENEUVE HB 575 x EP 1500 mm Between points: 1500 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Spindle speed: from 25 to 2000 RPM Turret Multifix 3-jaws chuck Ø 250 mm Threadings: Metric + Whitworth SteadiesFixed + followed TailstockCM5 Scale 2 axes ACU-RITE (Axe X defective) Lubricant pump Voltage: 380 V Length: 300 mm Width with tank: 1500 mm Height: 1700 mm Weight: approx 2,5 T

Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T

Parallel Lathe CAZENEUVE HB 725 Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Universal Lathe Top Condition The machine comes from a small workshop and is very, very little used. Year of Make: 2009 Digital 2 Axis 3 Jaw chuck RAPID B Quick Change Steel Bracket + Inserts Koernerspitze Rear shield length Spaenewagen

1 Used Universal Lathe DOOR 560 x 2000 Three-jaw chuck 250 mm digital display 2 axes top Multifix

Fully functional Universal Lathe LÖW W 490 x 1,000 mm Year of Make: 2004 New price at that time: 30.800,- € net 3-axle 1,000 mm Fagor Position indicator NV 300 T for 3 coordinates Z-axis and X-axis / switchable Z-ash Precision glass scales incl. accessories: 3-Jaw Wedge Bar Manual Chuck Forkardt F315 1 set of clamping jaws with key Chip tray Coolant tank 1 fixed lynette 1 Lynette Technical documentation LxWxH: 270x130x180 cm Weight: 2.5 t Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can make an appointment for a viewing at any time. We would love to hear from you.

Sell my Nardini ms 175 e in good condition. The machine has a cooling lubricant pump and a Multifix holder in size B is installed. A 160mm jaw chuck from Garant is installed, 3 more jaws are still included. The machine has only been used occasionally over the last 20 years and has been stationary for a large part of the time. Machine data: Center width: 800mm Top height above bed: 175mm Spindle bore: 46mm Speed: 18 gears, stepped 25 - 2000 rpm Total power requirement: 4.4/2.2kW Machine weight approx. 900kg Space requirements approx. L approx. 1.8 x W approx. 0.95

Parallel Lathe PROMAC type 948 Year of construction: 2007 Between points: 800 mm Maxi Ø on bench: Ø 320 mm Maxi Ø over saddle: Ø 180 mm Maxi diameter in brocken bed: Ø 400 mm on 100 mm Spindle diameter: Ø 36 mm Spindle speed: from 90 to 1800 RPM Rapid Turret GOODSHAPE 3-jaws chuck LADNER Ø 160 mm Motor: 1,5 kW Threadings: Metric + Whitworth Steadies: One 3-points steady + one follow steady Tailstock: CM3 Supplied with one plate Ø 250 mm + one independant 4-jaws chuck Ø 200 mm+ + some jaws Lubricant pump Voltage: 380 V Length: 1700 mm Depth: 700 mm Total height: 1600 mm Weight: approx 800 KG

I hereby sell a hamlet Primus, which is in very good condition. In recent years, it has been used only rarely, rarely and exclusively for plastic machining. The machine is equipped with a digital measuring system on 3 axes and is fully functional. No VAT is shown at the time of purchase.