sheet width: 250 mmcoil weight: 2,5 tcoil internal dia.: 450 - 530 mmsheet thickness - max.: 4 mmcoil outside dia.: 1400 mmtotal power requirement: kWweight of the machine ca.: 1000 kgOverall size: 1,95 x 1,95 x 1,7 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 0400 mmcoil weight: 2,00 tcoil internal dia.: 340 - 530 mmcoil outside dia.: 1200 mmband speed: 14 U/mintotal power requirement: 1,1 kWweight of the machine ca.: 0,380 tdimensions of the machine ca.: 1,30 x 0,90 x 1,40 mwith driveManual central spreadingBrake motorMotor has only one on/off switchThe reel runsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil weight: 1,5 tcoil internal dia.: 400 - 500 mm: je Arm 670 mmtotal power requirement: kWweight of the machine ca.: 760 kgdimensions of the machine ca.: T 1,23 x B 1,7 x H 1,1 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 375-550 mmcoil outside dia.: 1600 mmweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1500x1500x1900 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0520 - 600 mmcoil weight: 1,00 tcoil internal dia.: 470 - 530 mmcoil outside - diam. ca.: 1400 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mSpreading by hand crankmanually adjustable disc brake6 side limit armsLength of the support arms: 600 mmBand width: max. 520 mm between the limit ringsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 320 mmcoil weight: 1,5 tcoil internal dia.: mmcoil outside dia.: 1250 mm diameter of the mandrel: 370/430 mmMandrel height: 1000 total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...

sheet width - max.: 250 mmcoil weight: 150 kgcoil internal dia.: 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mmcoil weight: 150 kgcoil internal dia.: 300-500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mmcoil weight: 250 kgcoil internal dia.: Ø 290-550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 300 mmcoil weight: 150 kgcoil internal dia.: 200-520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 350 mmcoil weight: 1 tcoil internal dia.: 360-475 mmweight of the machine ca.: 500 kgdimensions of the machine ca.: BxTxH 1500x1500x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 360 mmcoil weight: 2000 kgcoil internal dia.: 380-500 mmcoil outside dia.: 1000 mmtotal power requirement: 1,5 kWweight of the machine ca.: 580 kgdimensions of the machine ca.: 1,20 x 1,60 x 1,60 m- Direction of rotation right / leftThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

band width: 200 mmband speed: 20 m/min: 150 kg- Internal clamping range: 200- 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0200 mmcoil weight: 0,150 tcoil internal dia.: 200 - 550 mmcoil outside - diam. ca.: 850 mm0: 26 U/mintotal power requirement: 0,25 kWweight of the machine ca.: 0,150 tdimensions of the machine ca.: 1,00 x 0,85 x 1,30 m- Mechanical brake- Mechanical spread- Control missing, the motor was temporarily connected for a test run- Forward/reverse rotation via reversing switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil weight: 1 tcoil internal dia.: 350-450 mmweight of the machine ca.: 0,5 tdimensions of the machine ca.: BxTxH 1500x1500x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0300 mmcoil weight: 0,300 tcoil internal dia.: 250 - 550 mmcoil outside - diam. ca.: 1200 mm0: 14 U/mintotal power requirement: 0,37 kWweight of the machine ca.: 0,300 tdimensions of the machine ca.: 1,10 x 1,20 x 1,35 m- Belt loop control start / stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 150 mmcoil weight: tcoil internal dia.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 150 mmcoil weight: tcoil internal dia.: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0650 mmcoil weight: 2,00 tcoil internal dia.: 420 - 520 mmcoil external diameter: 1500 mmpower requirement: 2,0 kWtotal power requirement: kWweight of the machine ca.: 1,40 tdimensions of the machine ca.: 1,60 x 1,60 x 1,60 mdecoiler is sold as is without commissioningThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double – decoiler with interlayer rewinder EW. Brand: Soprem. Model: 2H30/J2/10M/L3.N1 – 2EW/J1/N0/XX. Serial no.: 20120014/5. Year of manufacture: 2012. Decoiler information: Loading capacity maximum: 30 kg (x 2). Outside diameter of bobbin maximum: 800 mm. Inside diameter of bobbin: 360 mm. Core diameter of hole: 50 mm. Bobbin width: 45 mm. Speed decoiler: 0.3 – 4 rpm. Speed production line: 0.3 – 5 m/min. Interlayer rewinder information: Loading capacity maximum: 15 kg. Outside diameter of bobbin: 300 mm. Bobbin width maximum: 80 mm. Rotation speed: 2 – 140 rpm. Adjustable torque: 12 – 180 n/cm. Electricity: 230 V / 60 Hz / 9.4 A / 0.18 kW. Dimensions: 1840 x 650 x H2100 mm. Made in Switzerland. Complete documentation in German and English. No clear sign of use, machine came from bankrupted production that never started. More stamping equipment made ...

sheet width: 300 mmcoil weight: 0,5 tcoil internal dia.: 480-530 mmcoil outside dia.: 1200 mmweight of the machine ca.: 0,3 tdimensions of the machine ca.: BxTxH 1200x1200x1500 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mmcoil weight: 2x 0,8 tcoil internal dia.: 300-500 mmcoil outside dia.: 1200 mmweight of the machine ca.: 0,7 tdimensions of the machine ca.: BxTxH 2000x2000x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mmcoil weight: 2x 500 kgcoil internal dia.: Ø 300-540 mmcoil outside dia.: Ø 1000 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.