Condition of the machine: We are selling a reliable and in good technical condition ALZRAPID 32. The motors of the drilling spindle and the axles were re-mounted and cleaned. The machine is ready for demonstration under power and available at short notice. For the technical data, please refer to the following description: Technical data: Spindle speeds: 102/152/204/250/304/408/ 500/608/816 /1000/ 1216/2000 Short spindle: MK4 Drilling capacity steel E 335 (St 60) 1): 32 mm Drilling capacity cast EN-GJL-200 (GG 20): 32 mm Motor: 1500/3000 rpm Accessories: - Digital display with glass scales -Tapping - R 0 L - Adjustment -Vice - Documentation and operating instructions

DONAU DR 23 / High-speed radial drilling machine -Drilling capacity / steel approx. 28mm -Projection 700mm -Spindle cone MK3 -Speed range 70-1550 rpm / gearbox -Feed range 0.075 - 0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Lateral clamping surface for larger workpieces Bn9Q9Layy8C -Chuck -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / weight 2000Kg

Specifications: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 30 - Threading GG 25 M 40 - Drilling spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drill feeds 0.1 - 0.45 mm - min./ max. distance spindle – table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg -with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the left side of the machine

Boom travel approx. 600 mm Distance table - spindle nose min. 250, max. 650 mm Quill stroke 190 mm Speed range: 18 speeds 41-1,850 rpm Drill feeds: 4 pieces ( from 0.1 - 0.3 mm/rev ) Work table 600mm x 1200mm Tool holder MK 4

40 DONAU fully functional, Condition : well used

DONAU DR 40z High Radial Drilling Machine Specifications: - Drilling capacity into solid steel ST 60: 40 mm - Drilling capacity GG 25: 50 mm - Threading ST60: M 33 - Threading GG 25: M 45 - Drilling spindle holder: MK - Spindle diameter: 55 mm - Quill stroke: 200 mm - 18 drilling spindle speeds 35-1800 rpm - Drill feeds 0.075 - 0.60 mm/rev - Height adjustment of the drilling column: 450 mm - Drilling radius min/max: 305 / 1005 mm - Table size: 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement: approx. W 1900 x H 2800 D 2300 mm - Weight: approx. 1800 kg

Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm 0P2Fdo3 - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Drilling capacity 45mm Table size : 1200 x 560 mm Drilling capacity 45mm Spindle Holder MK 4 Quill stroke 170mm Speed / Steps 70-2000 rpm Feed / Steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Table dimensions LxW: 1300 x 650 mm Spindle Holder: MK3 Drilling capacity: ø 32 mm Tenon to: M30 Spindle stroke: 150 mm Spindle speeds: 102 - 2,000 rpm Height adjustment: 410 mm Swivel radius: 360º Equipped with: - Tilting table at the back - Extra flat table for back - Coolant device -Operating instructions Country of origin: Spain Motor power: Machine LxWxH: 800 x 1,150 x 2,000 mm Machine weight: 2,000 kg

Offer 24468 Specifications: - Drilling capacity into solid steel ST 60 40 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 30 - Threading GG 25 M 40 - Drilling spindle holder MK 4 - Quill stroke 200 mm - Drilling spindle speeds 40 - 2000 rpm - Drill feeds 0.08 - 0.35 mm - Max. distance spindle – table 690 mm - Drilling radius max. 760 mm - Table height 820 mm - Table size 1200 x 500 mm - Spindle drive 400 V / 2.2 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 2600 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device -Lighting