used BOY for sale

Just arrived and now awaiting refurbishment by the team is this Boy 22M-HV machine. The injection unit can be mounted vertically or horizontally, allowing for split line or traditional moulding respectively. Fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. These small machines are quite rare on the used market, they are very versatile from a very small footprint. The rest of the machine is standard as per a typical BOY 22M, you can find the specification data via the clickable link above. Fitted with the Procan MD version of the user friendly and well supported Procan control system. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure duri ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 30M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Newly refurbished, we have this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Fitted with a 22mm diameter screw, which gives a max shot weight PS (g) of 27. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Used, refurbished injection moulding machine Dr. Boy 22 M Procan Control The machine was dismantled and checked. Among other things, all hydraulic hoses, seals and piston rings were renewed from the injection side, closing side, pressure intensifier, New seals between valves and control block, test run dry and successfully carried out with tools (parts production), Specification:  ...

This injection molding machine from Dr. Boy is in good condition. The machine is from 2024 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: BOY XS E Year of construction: 2024 Closing force: 10 T Screw diameter: 18 mm Shot volume: 15.3 cm³ Working hours: < 25

Boy 100E / Hybrid Machine Year of Make: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Spray pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Tiebar spacing: 430x360 mm Size of the clamping plates: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 2 - Touch Screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Metrics: Weight: 3530 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 7.7 kW Total power: 22.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests o ...

Boy 90 M Year of Make: 2004 Injection unit: Screw diameter: 42 mm Injection weight: 193 g Spray pressure: 1724 bar Dosing volume: 214.7 ccm Clamping unit : Clamping force: 90 t Tiebar spacing: 430x360 mm Size of the clamping plates: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touch Screen Additional equipment: Euromap 12 Robot interface Air Valve x 1 Metrics: Weight: 3100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pumps/motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Boy 80 M Year of Make: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Spray pressure: 2085 bar Dosing volume: 147.6 ccm Clamping unit : Clamping force: 80 t Tiebar spacing: 410x358 mm Size of the clamping plates: 680x555 mm Ejector: hydraulic Clamping unit: toggle lever Control: Procan CT Additional equipment: Metrics: Weight: 3200 kg Length/Width/Height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating capacity: 10.4 kW Total power: 25.4 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of Make: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All o ...

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All  ...

Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All o ...

Boy 35A VV Year of Make: 2005 Injection unit: Screw diameter: 28 mm Injection weight: 55.8 g Spray pressure: 1577 bar Dosing volume: 58.5 ccm Clamping unit: Clamping force: 35 t Spar spacing: 280x254 mm Size of the clamping plates: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan CT - Touch Screen Additional equipment: Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Metrics: Weight: 1350 kg Length/Width/Height: 2.06x0.95x2.74 m Drive: Pumps/motor: 7.5 kW Heating capacity: 5.8 kW Total power: 13.3 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP ...

Awaiting refurbishment at our works in Wellingborough, Northamptonshire is this high precision BOY 35M injection moulding machine. Fitted with the Procan MD controller. This machine only has run hours of 10k. The 35M from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. This machine is one of the smallest footprint 35T machines. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free.

We have in our workshop and awaiting refurbishment this BOY 22D. The machine is a compact 22 tonne clamp machine with a very easy to use controller with the Dipronic system. These machines have stood the test of time and remain very popular as they are simple to use, cheap to repair and reliable. Machines awaiting refurbishment can be reserved with a small deposit and the refurbishment is then prioritised and scheduled. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding ID: 12646 Manufacturer: B ...

Now fully refurbished by the STV team, is this BOY 30M machine with Procan controller. Fitted with a 28mm screw. These 30 tonne clamp machines from BOY are some of the smallest (footprint wise) available on the market. The 30M’s are a rarer variant of the market leading BOY 22. The key difference, aside from the uprated clamp force, is that the 30M’s have larger platens and a four tiebar design, allowing for greater versatility. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly  ...

Now fully refurbished by the team at STV Machinery is this BOY 22M VH injection moulding machine. This machine was manufactured in 2002 with very low 12,187 run hours. It is fitted with a 24mm screw. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Category: Injection Moulding Latest Refurb ID: 12066 Manufacturer: BOY Model: 22MVH Datasheet (PDF): View Here Viewing: Available to inspect by appointment Condition: Refurbished with guarantee Year: 2002 Clamp Force (t): 22 Screw Diameter (mm): 24 Max Shot Weight (PS)  ...

Our in-house team of expert engineers have now completed the full refurbishment of this 2003, BOY 90A injection moulding machine, 90T clamp force with the Procan MD controller. The BOY 90 was (and still is) a good seller for BOY as it is one of the most compact 90 tonne clamp machines available on the market. The direct lock design of the clamp unit was designed to minimise the floor space required as much as possible. The design also allows for unrestricted access for conveyors underneath the clamp unit. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivere ...

Awaiting refurbishment by the team at STV Machinery is this 2004, Boy 35A machine with only 16,000 run hours. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 4 weeks from order. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing  ...

This injection moulding machine from Dr. Boy is in good condition. The machine is from 2007 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: 55M Year of construction: 2007 Clamping force: 55 T Screw diameter: 32mm Shot volume: 96.5 cm³ Working hours: 24,210

2000 BOY 22 M Injection Molding Machine vertical Clamping unit 22 ton Max / Min Plate space 400 / 200 mm Screw: 22 mm Injection pressure 1732 bar Injection volume 30 ccm Shot weight: 27 g/PS Weight: 950 kg Funtional We can sell 2 pieces of this type, one is year 2000 and one is year of made 1995

Clamping force 550 kN, tool installation height 250 - 400 mm, tool stroke 400 mm, distance clamping plate max 650 mm, centering diameter 110 mm, clamping plate 540 x 565 mm, screw diameter 32 mm, stroke capacity 96.5 cm³, injection weight 92.30 g, specific injection pressure 2127 bar Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Ref. no.: 18552 Hersteller: BOY Year of construction: 1997 Clamping unit Clamping force: 22 ton Opening stroke: 200 mm Distance between tie bars: 254 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 425 x 400 mm Injection unit Screw diameter: 28 mm Injection volume: 49 cm³ Shot weight: 44 g Injection pressure: 1069 bar Measurements and weight Dimensions: 2.3 x 0.81 x 1.63 m Machine weight: 760 kg

Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included.

A small Boy injection molding machine is available. Clamping force: 220kN, tie bar dimensions X/Y: 254mm/254mm, max. platen distance: 400mm, min. installation height: 200mm, opening stroke: 200mm, ejector stroke: 80mm. Screw diameter: 24mm, injection volume: 36cm³, injection weight: 32g, injection pressure: 1455bar. Machine dimensions X/Y/Z: 1800mm/1000mm/2600mm, weight: approx. 750kg, control: Dipronic. On-site inspection is possible.

Manufacturer: Boy Model: 50 E Year of Manufacture: 2024 Type of Machine : Injection Molding Machine Operating Hours: 8h Equipped with a 32mm screw and enhanced with key features including Euromap 67 compatibility, brush interface, blow-out functionality, and evacuation system for optimized performance. Find more here - / Contact us at -

Clamping force: 55 t Distance between tie bars V: 335 mm Distance between tie bars H: 360 mm Type: Horizontal Drive: Hydraulic

This hydraulic injection moulding machine was manufactured in 2006. The BOY 55A features a clamping force of 550 kN, a max. plate distance of 650 mm, and supports a max. tool weight of 800 kg. It offers a variety of screw diameters from 28 to 42 mm, enhancing its versatility for different injection pressures and volumes. Consider the opportunity to buy this BOY 55A hydraulic injection moulding machine. Contact us for more information about this machine.