used DMG MORI for sale

1 DMG-Mori Automation ROBO2GO/ Plug and PLAY ROBO2 GO from DMG-MORI robots for equipping your lathe Automation for lathes from DMG-Mori Bj 2019 max. Workpiece weight. 20 kg

CNC multi-spindle automatic lathe DMG MORI Multisprint 36 Control Fanuc 30i B Bar Passage 36mm 6 motor spindles with Z-axis 6 cross slides with X-Y axles Drum circuit with direct drive 6 hydraulic clamping cylinders 2 control panels Spindle positioning: 0.1 degrees Electronic handwheel Sub-spindles pos.7/8 (compared to pos. 1-6) X-Y-Z axis, C axis (angular resolution 0.002 degrees) Rapid traverse 40m/min Differential pressure for workpiece clamping system 2x workpiece carriers 5-fold fixed 6x base holder with 3 quick-change mounts Drive unit of the driven tools 8000 rpm Conveyor Flushing Chip Conveyor Fire extinguishing device including explosion protection flap Anthropomorphic robot in the workspace Linear axis carriage for transporting workpieces Leftover piece removal Various tool holders Low and high-pressure system for cutting fluid suitable for oil or emu ...

DMU50 2nd Complete Only 45 spindle hours! Traversing range X-axis approx. 500mm Y-axis approx. 450mm Z-axis approx. 400mm Table 360°x 0.001°, -5°/+110° Workpiece diameter approx. 630mm Workpiece weight max. approx. 300kg Speed max. approx. 14,000 rpm Spindle motor approx. 35 / 25 kW Number of tool positions approx. 60 Rapid traverse approx. 30m/min Mounting cone BT63 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 35 kVA Footprint L x W x H approx. 3.40x2.30(3.20)x2.80 m Machine weight approx. 4,500kg - Spindle 14,000 rpm - Mounting BT40 - Tool magazine 60 - Swivel rotary table with digital drives for automatic 5-axis machining -Conveyor - Internal coolant supply 40bar/600l - Spray gun for chip removal - Change of coolant and air bubbles - Air bubbles through the spindle center - 30 quickSET - Renishaw touch probe - Elect ...

Machine Type: CNC Lathe with AGW Manufacturer: DMGMORI Type: CLX750V3 Year of Make: 2021 Control type: SLIMline® Multi-Touch Contr./Siemens Main spindle A2-11 with AC motor, 36/46 kW (100/40%), 2,000 min-¹ - 6-jaw chuck - Partial hollow clamping device for the main spindle 127mm - Chuck flush for the main spindle - 12-fold servo tool turret mount VDI 50, - 12 powered tool stations - Direct displacement measuring system X - Hydraulically movable tailstock via M-function - Interface for robots - Automatic door - External electronic handwheel - Signal lamp 4 colours - 8 / 20 bar / coolant system 600l tank with belt filter - Coolant spray gun, 5 bar - Chip conveyor scraper belt - Foot control pedal for tailstock - Mechanical preparation for suction (Errors in the technical data and specifications excepted)

Machine Type: Universal Machining Center Model No.: DMC75 (65) monoBLOCK Manufacturer: DMGMORI Control: CELOS with Siemens 840D sl Operate First commissioning: 2021 (2020) Location:Germany -Motor spindle speedMASTER® 20 - 20,000 min-1 HSK63 -Vertical headstock -NC swivel rotary table with pallet carrier, -Linear pallet changer, -Setup station manually rotatable 4 x 90° -Tool magazine 120 places -Scraper chip conveyor -IKZ, frequency-controlled 10 bar! 37 l/min - 80 bar / 31 l/min -Rotating lens -Rinsing gun for chip rinsing -Oil and emus mist shedding system -Probe infrared -Tool measurement in the work area -Tool breakage detection mechanical design -3D quick$ET Expansion Pack -Signal lamp 4-colour -Electronic handwheel Siemens 840D -Adaptation of the demonstration machine DMC65->DMC75 (Errors in the technical data and specifications excepted)

Model No.: NHX5000 Manufacturer:DMGMORI Control: CELOS Siemens S840Dsi Year of manufacture:2020 - Spindle speed 15,000 min-1, 46/30 kW - HSK-A63 - IKZ preparation -Conveyor - Automatic rotary APC with 2 stations - Probe (spindle) - Tool breakage control system in the tool magazine - Mobile control panel - B-axis 0.001 ° - Tool magazine for 60 tools - Coolant/air through the spindle (switching function) - Rotating viewing window - Oil mist suction device-5 point - Signal lamp 4 colours - Knoll KF11 0/700 compact filter system max. 7.0 MPa - KNOLL coolant cooler alpha 9 - AFS 1100 Oil Mist Separator - Oil Extraction Device 5 Cutting Point (Errors in the technical data and specifications excepted)

Machine Type: CNC Turning Center Model No.: NLX2500Y/700 Manufacturer: DMGMORI Control: Celos Year of Make: 2016 Location: Germany Turning diameter max. approx. 366 mm Turning diameter standard approx. 275 mm Chuck size approx. 250 mm Turning length approx. 705 mm Rod diameter max. approx. 80 mm Turret Stations 12 X-axis approx. 260 mm Z-axis approx. 795 mm Y-axis approx. 100 (±50) mm Tailstock travel approx. 734 mm Spindle speed max. approx. 4,000 rpm Rapid traverse X/Z approx. 30 m/min Rapid traverse Y approx. 10 m/min Rapid traverse C approx. 300 rpm Speed driven tools approx. 10,000 rpm Power consumption approx. 35 kVA Compressed air bar,L/min approx. 5, 150 bar,L/min Footprint L x W x H approx. 4.45 x 2.37 x 2.20 m (without chip conveyor) Machine weight approx. 7,760 kg - Main spindle 4,000 rpm - Clamping cylinder main spindle - Foot switch (double) fo ...

Machine name: Machining center Manufacturer: DMG MORI Model: NHX4000 with Siemens control Year of Make: 2021 Condition: very good (used) Equipment Spindle speed 20,000 min-1, 35/25 kW - HSK-A63 - IKZ preparation - Chip conveyor - Automatic rotary APC with 2 stations - Measuring probe (spindle) - Tool breakage control system in the tool magazine - Mobile control unit - B-axis 0.001 ° - Tool magazine for 60 tools - Coolant/air through the spindle (switching function) - Rotating viewing window - Oil mist extraction device - 5 mm point - Signal lamp 4 colors - INTERLITꞏ TMF300/600 Compact filter system - 70 bar with 15 kW auxiliary cooler - AFS 100 Oil Mist Separator - Oil Mist Extractor-5 Point Traversing range X-axis approx. 560mm Y-axis approx. 560mm Bobzs90g8zy Z-axis approx. 660mm Table 360° 0.001° Workpiece diameter approx. 630mm Workpiece weight max. app ...

Machine type: CNC-BAZ Vertical Model No.: DMC1850V Manufacturer: DMGMORI Control: Heidenhain TNC 640 Year of Make: 2019 Location: Germany Specifications Traversing range X-axis approx. 1850 mm Y-axis approx. 700 mm Z-axis approx. 550 mm Table size approx. 2160x750 mm Workpiece weight max. approx. 3,000 kg Speed max. approx. 20,000 rpm Spindle motor approx. 35/25 KW Number of tool positions approx. 60 Rapid traverse approx. 42 m/min Pick-up taper approx. HSK63 Power consumption approx. 50 kVA Floor space L x W x H approx. 13.3 sqm Machine weight approx. 14,800 kg Options: - Main spindle 20,000 rpm 35/25kW HSK63 - Direct displacement encoder X-Y-Z - Separate electronic handwheel - 60 seats chain magazine - bed flush via M-function - double switching filter - IKZ pump 80bar - 980l Coolant tank with paper belt filter Double switching filter - Coolant spray gun - S ...

Machine type: CNC turning-milling center Manufacturer: DMGMORI Type: CLX450TC Year of Make: 2022 Control type: Siemens Operate Specifications Turning diameter max. spindle 1+2 approx. 400 mm Turning diameter standard spindle 1+2 approx. 250 mm Rod diameter max. spindle 1 approx. 65 mm X-axis approx. 750 mm Z-axis approx. 1,100 mm Y-axis approx. +-100 mm A-axis (spindle 2) approx. 1,200 mm B-axis approx. 240° (+-120°) mm Spindle speed 1+2 approx. 5,000 rpm Speed milling pindle approx. 12,000 rpm Rapid traverse X/Y/Z approx. 40 m/min Rapid traverse A spindle 2 approx. 40 m/min Rapid traverse B axis approx. 70 m/min Power spindle 1+2 max. approx. 17 (40%) kW Power milling spindle max. approx. 10.5 (40%) kW Equipment Main drive spindle 1/2 17KW 40% - 5000rpm - Turning-milling spindle HSK63 10,5KW 40% - 12,000rpm - Tool magazine 60 places - alternating speed - coo ...

Machine Type: CNC Turning Center Model No.: CLX350V6 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Siemens Year of Make: 2019 Location: Germany Turning diameter max. approx. 320mm Turning diameter standard approx. 250mm Chuck size approx. 210mm Turning length approx. 465mm Rod diameter max. approx. 65mm Turret Stations 12 X-axis approx. 185mm Z-axis approx. 465mm Y-axis approx. 80 (+-40)mm Sub-spindle approx. 465 mm Spindle speed max. approx. 5,000 rpm Speed AGW max. approx. 5,000 rpm Rapid traverse X/Z approx. 30/36 m/min Rapid traverse Y approx. 22.5m/min • Main spindle 16.5 / 11 kW 5000 Ulmin • Hydraulic 3-jaw chuck 210 mm • Sub-spindle A2-5, 12.6 / 16.2 kW 5000 Ulmin • Hydraulic 3-jaw chuck 0169 mm • Manual tool measuring device • 12 VDI 30 station turrets • Tool drive for all stations • C-axis •Y-axis •Conveyor � ...

Machine designation DMG MORI NEF 360 LZ Year of construction 2022 Condition very good SPECIFICATIONS Workspace Circumferential diameter over bed: 360 mm Circumferential diameter over face slide: 195 mm Center width between DIN 806 tips: 800 mm Turning length: 800 mm Bed width: 260 mm + Tailstock with handwheel Quill stroke: 110 mm Diameter of the quill: 50 mm Mounting cone DIN 228: MK 3 + Drive Speed range: Up to 4,000 rpm + Turning spindle Spindle head DIN 55027 (standard): size 5 + Tool carriage Tool System: Size B

Conventional milling machine for training and production DMG MORI FP 4 M Specifications Working range (X/Y/Z) 500 / 400 / 400 mm Rigid angle table clamping surface 800 × 480 mm Spindle drive speed range 25 - 3,000 min-1 infinitely variable with input on the counter Regulated main drive 6 kW Vertical milling head swivel ±90° (180°) Linear axis feed range 6 - 500 mm/min Rapid traverse 1,500 mm/min Space requirement (W x D) approx. 2,235 x 1,875 mm Machine weight approx. 1,600 kg with work table and milling head Heidenhain Digital Display

• Main spindle 22/33 kW • Hydraulic 3-jaw chuck 315 mm • Automation package • 12 VDI 40 station turrets • Tool drive for all stations • C-axis •Y-axis •Conveyor • Preparation for bezel • 8 / 20 bar / coolant system • Paper belt filter with tank capacity 600 l • Automatic sliding hood, electric • Connection nozzle for oil mist separators • FANUC system for tool breakage and wear monitoring • Electr. Handwheel

Machine Type: CNC Turning Center Model No.: CLX450V3 Manufacturer: DMGMORI Control: SLIMline® Multi-Touch Contr./Siemens Year of Make: 2022 Location: Germany Turning diameter max. approx. 400 mm Turning diameter standard approx. 310 mm Chuck size approx. 310 mm Turning length approx. 755 mm Rod diameter max. approx. 80 mm Turret Stations 12 X-axis approx. 276 mm Z-axis approx. 830 mm Tailstock approx. 800 mm Footprint L x W x H approx. 4.30x2.45x2.30 m (with chip conveyor) Machine weight approx. 6,250 kg Main spindle A2-8 17 / 25.5 kW (100/40% ED), 4,000 rpm - 3-jaw chuck - Chip conveyor - 12-fold servo tool turret holder VDI 40 - 12 driven tool stations - Direct position measuring system X-axis - Hydraulically movable tailstock over M-Function - External Electronic Handwheel - Interface for Robo2Go - Automatic Work area door - Automatic feed flushing - 5-20 bar ...

Control Siemens 840 D SL Multi Touch Direct displacement measurement system HSK 63 A spindle at 20,000 rpm Tool magazine with 30 places Coolant-blown air switching via M function Blowing air can be selected by spindle center via M function IKZ with 40 bar incl. paper belt filter Rotoclear, Chip Conveyor, Rinsing Gun Bed Flushing, Oil and Emulsion Mist Separator Infrared probe Renishaw OMP 60 Laser tool measurement (length/ diameter) Machine Protection Controll Active cooling unit for control cabinet Operating mode 4 Network Failure Security Package Energy Meter for 3D Control Safety Composite Panes Packages ATC

DMG Mori M1, Year of manufacture 2021, Siemens 828 D control system with Shop Mill, Travel X/Y/Z 550/550/510 mm, IKZ 20 bar, Tool changer 24-speed, SK 40 mount, Conveyor Renishaw touch probe, Table size 850 x 650 mm, max. table load 650 kg, Bed Rinse via M function, Canopy prepared oil mist separator, Machine weight 5600 kg, Machine without oil mist extraction, without clamping devices, new milling spindle 2024, Interface Automation,

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840D table - swivable +/-: +110 / -5 ° -C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 t dimensions of the machine ca.: 2.9 x 2.0 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Other Info: 1 DMG MORI - CMX-70U MACH-ID 9121 Make: DMG MORI Type: CMX-70U Control: SIEMENS 840D Year: 2023 Buerner Maschinen Fabrik Tank with Grundfoss pumps Tank Capacity 600 Liter Band filtration set-up FAMOT (DMGMORI) Conveyor  Scraper conveyor style Spray gun connection for swarf removal Internal coolant suply 20 bar Equipped for CMX-50U Never used set 0 working hours Equipped for Siemens 840D Length:3000mm Width:1800mm Height:1500mm Weight:500kg

A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible.

A DMG Mori 3-axis precision milling machine is available. Travel X/Y/Z: 200mm/200mm/190mm, speed: 40000rpm, feed: 30m/min, accuracy: 0.001mm. Machine dimensions X/Y/Z: approx. 1800mm/1550mm/1850mm, weight: approx. 2200kg, control: Siemens 840D, operating hours: 4979h, spindle hours: 1041h. The spindle was completely overhauled in 2023. An on-site inspection is possible.

A chip conveyor for DMG Mori machines is available. Height: 1650mm, width: 1870mm, length: 3560mm, weight: approx. 600kg. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.

CNC lathe Type: NEF 400 Manufacturer: DMG MORI Year: 2017 Control: Celos ERGOline Machine hours: 1268 Spindle hours: 235 Max.workpiece diameter: 385 mm Max.workpiece length: 650 mm Spindle bore: 65 mm Turret: 12 positions, 6 driven tools Condition of new machine, under power Find more here - / Contact us at -

1. CNC Lathe - DMG MORI SPRINT 20/5 (Swiss Type): - Model: SPRINT 20/5 - Year of Manufacture: 2016 - Max Spindle Speed: 10,000 RPM - Max Bar Diameter: 25 mm - Max Torque: 100 Nm - Weight: 2,150 kg - Manufacturer: DMG MORI - Condition: Excellent, well-maintained machine. 2. Barfeeder - IEMCA SMART 320: - Model: SMART - Type: 32 LL - Year of Manufacture: 2016 - Max Pressure: 6 bar - Weight: 440 kg - Voltage: 200 V, 3-phase - Current: 5 A - Frequency: 50 Hz - Manufacturer: IEMCA - Condition: Fully operational and in excellent working condition. Find more here - / Contact us at -

CNC lathe Type: NEF 400 Manufacturer: DMG MORI Year: 2017 Control: Celos ERGOline Machine hours: 1268 Spindle hours: 235 Max.workpiece diameter: 385 mm Max.workpiece length: 650 mm Spindle bore: 65 mm Turret: 12 positions, 6 driven tools Condition of new machine, under power Find more here - / Contact us at -

2019 DMG MORI CTX 800 TC Find more here - / Contact us at -

5-axis CNC machining center Type: DMU 50 eVolution linear Manufacturer: DMG MORI Year: 2007 Control: Heidenhain TNC 530 X: 500 mm Y: 450 mm Z: 400 mm Spindle taper: HSK 50E Tool magazine: 30 positions Max spindle speed: 18000 rpm Screw chip conveyor Micro filtration Renishaw workpiece probe Machine in good condition, under power Find more here - / Contact us at -

DMG MORI Machining Center Model : CMX 70 U Year of Manufacture: 2022 Spindle Speed: 12,000 max. 1/min Weight: 7,800 kg Power Supply Specifications: - Power Input (kVA): 30 kVA - Maximum Current (A): 47 A - Voltage (V): 400 V (+10%) - Frequency (Hz): 50 Hz - Control Voltage (AC/DC): 230 V (AC), 24 V (DC) - Short Circuit Capacity (kA): 0.63 kA - Maximum Voltage (V max.): 440 V Find more here - / Contact us at -

DMG MORI Machining Center Type: M1 Year of Manufacture: 2020 Maximum Spindle Speed: 12,000 revolutions per minute (rpm) Maximum Table Load: 5800 kg Power Supply Requirements: - Power Consumption: 20 kVA - Maximum Current: 35 A - Voltage: 400 V (±10%), 50 Hz - Maximum Short-Circuit Current: 0.40 kA Other Electrical Specifications: - AC Voltage: 400 V - DC Voltage: 230 V / 24 V CE Marked Find more here - / Contact us at -

2002 DMG MORI Gildemeister CTV 250 Lathe machine Hours in picutres Find more here - / Contact us at -

Machine Type: CMX 50 U (5-Axis Universal Machining Center) Year of Manufacture: 2019 Maximum Spindle Speed: 12,000 revolutions per minute (rpm) Maximum Table Load: 5000 kg Power Supply Requirements: - Power Consumption: 30 kVA - Maximum Current: 47 A - Voltage: 400 V (±10%), 50 Hz Other Electrical Specifications: - AC Voltage: 400 V - DC Voltage: 230 V / 24 V - Maximum Short-Circuit Current: 0.3 kA Has a 60 tool magazine Machine Type: PH 150 (Automation System) Year of Manufacture: 2019 Maximum Load Capacity: 1550 kg Power Supply Requirements: - Power Consumption: 4.3 A - Voltage: 400 V (±10%), 50 Hz - Maximum Short-Circuit Current: 0.2 kA - Other Electrical Specifications: - AC Voltage: 400 V - DC Voltage: 24 V Has an EROWA chuck including 10 pallets of dimensions 320mm320mm. Also included 10 vises of Gerardi (Compact Grip ART.650 Type3x260 / 7.65.03260). Find more here ...

CNC vertical machining center Type: MCX 600 V Manufacturer: DMG MORI Year: 2017 X: 600 mm Y: 560 mm Z: 510 mm Max spindle speed: 12000 rpm Max workpiece high: 630 mm Max workpiece length: 900 mm Max workpiece width: 560 mm Max workpiece weight: 600 kg Machine weight: 4700 kg In very good condition, worked few hours, under power Find more here - / Contact us at -

5-axis CNC machining center Type: DMU 65 monoBlock Manufacturer: DMG MORI Year: 2016 Control: Heidenhain iTNC 640 Hours: 26500 X: 750 mm Y: 650 mm Z: 550 mm Rotary table diameter: 650 mm Max spindle speed: 20000 rpm Tool magazine: 60 positions Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: DMG MORI Model: CTX600 DL 2000 Condition: Good (Mechanically partially overhauled in 2023 + new circuit boards) Accesories : Various tool holders and a steady rest Find more here - / Contact us at -

- Manufacturer: DMG MORI - Model: CLX 450 - Type of machine: Horizontal Turning Machine - Year: 2020 - Max Spindle Speed: 4000 RPM - Weight: 6400 kg - Power Requirements: - Power: 39 kVA - Max Current: 56 A - Max Voltage: 440 V ±10% - Frequency: 50/60 Hz - AC Voltage: 400 V - DC Voltage: 24 V Including the following equipment: - 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti - more than 20 steady tool holders for turning and boring tools by ALGRA - 4 bolted tool holders by SAUTER/ALGRA - a mechanically operated bar puller toolholder by KINTEK - a live center - balanced pressure clamping (able to grip thin walled parts) - sets plastic drawtubes for bar working in different diametrers - more than 50 sets of soft machined jaws - 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW - SMW special ring for soft jaw turn ...

This 3-axis DMG MORI CMX 800V was manufactured in 2019, offering advanced capabilities for precise vertical machining. Ideal for complex geometries and multi-sided machining, this machine represents a significant asset for enhancing production efficiency. Consider the opportunity to buy this DMG MORI CMX 800V vertical machining centre. Contact us for more information about this machine.

This 5-axis DMG MORI CMX 50U vertical machining center was manufactured in 2019. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 50U machine we have for sale. Contact us for more information.

This 3-axis DMG MORI M2 vertical machining center was manufactured in 2023. It features a spindle speed range of 20 to 12,000 rpm, a tool magazine for 24 tools, and a chip conveyor. The machine offers a travel path of X/Y/Z - 1100/550/510 mm and a table size of 1400 x 600 mm. If you are looking to get high-quality milling capabilities, consider the DMG MORI M2 machine we have for sale. Contact us for more information.

Machine Type: Turning Machine Model: Sprint 50 2T Manufacturer: DMG MORI Year of Manufacture: 2017 Specifications: - Spindle Speed (Max): - 1st Spindle: 7000 rpm - 2nd Spindle: 7000 rpm - Machine Weight: 9200 kg Electrical Specifications: - Power: 54 kVA - Current (Max): 135 A - Fuse Rating: 160 A - Voltage: - Main: 400 V ±10% - Auxiliary AC: 230 V - Auxiliary DC: 24 V - Frequency: 50 Hz Accessories/extras: CT-20D Hinge Belt chip extractor 2 pcs Sauter turret head Typ. Grip main spindle SPANNTOP mini 65 Grip counter spindle SPANNTOP mini 52 Unloading system Marposs TT30 tool setting system Artis CTM V6 tool wear and breakage monitoring system LNS Alpha 552 - 4 meter bar feeder Find more here - / Contact us at -

This 5-axis DMG MORI CMX 70 U was manufactured in 2023. Equipped with a Heidenhain 620 control, it features a 60-place SK40 magazine, a chip conveyor, and through-spindle cooling. The machine offers a 12,000 RPM capability and a comprehensive range of motion with X700, Y630, Z600, C360, and B-10 to +95. Ideal for precision machining, buy this DMG MORI CMX 70 U vertical machining center. Contact us for further details regarding this vertical machining center.

This 3-axis DMG MORI M1 Pro was manufactured in 2021. It features a spindle speed up to 12,000 RPM, internal and external coolant options, and a tool magazine with 24 places. The machine includes a Renishaw Touch Probe-Kit, chip conveyor, and an internal coolant supply at 20 bar. If you are looking to get high-quality milling capabilities, consider the DMG MORI M1 Pro machine we have for sale. Contact us for more information about this machine.

This 6-axis DMG MORI CTX ALPHA 500 V6 was manufactured in 2012. It features a Heidenhain ITplus control, a 12-holder turret with driven tools, and both C and Y axes for enhanced versatility. Main spindle speed reaches up to 5500 rpm, and the counter spindle up to 6000 rpm. VDI30 tooling interface enhances its capability. A great opportunity to buy this DMG MORI CTX ALPHA 500 V6 horizontal turning machine. Reach out for further details regarding this horizontal turning machine.

This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control unit and a 12,000 rpm spindle with SK40. The machine comes with chip conveyor, IKZ (20 bar), oil mist extractor, machine cabin roof, touch probe Heidenhain TS 649 and electronic handwheel. Contact us anytime for further questions!

This 3-axis DMG MORI NLX 2500/700 turn-mill centre was manufactured in 2021. It features a dual spindle setup with capacities of 4000 and 6000 min-1, and a 12-station bolt-tightened turret with Y-axis. Equipped with a high-pressure coolant system and a chip conveyor, it ensures efficient chip removal. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI NLX 2500/700 machine we have for sale. Contact us for further details regarding this machine.

This 3+2-axis DMG MORI DMU 50 ecoline vertical machining centre was manufactured in 2014. It features a SLIMline panel on SIEMENS 840D, with a travel range of 500 x 450 x 400 mm and a speed range up to 8000 rpm. The table measures 630 x 500 mm, supporting a maximum load of 300 kg. If you are looking to get high quality milling capabilities consider the DMG MORI DMU 50 ecoline machine we have for sale. Contact us for more information.

This DMG MORI CMX 70U Milling machine was manufactured in the year 2022 in Poland and has 4942 production hours. It is equipped with a SIEMENS 840D Solutionline control unit. The machine disposes of a tool magazine with 30 slots, a chip conveyor with 300l tank and a cabin roof. Contact us anytime for further questions.

This 3-axis DMG MORI DMC 1150 V was manufactured in 2016. A robust vertical machining center featuring a 1150 mm X-axis, 700 mm Y-axis, and 550 mm Z-axis. It boasts a rapid traverse of 42 m/min and a speed range up to 14,000 rpm. Equipped with a Heidenhain TNC 640 control, 30-position SK40 tool magazine, and a chip extractor system. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1150 V machine we have for sale. Contact us for more information.

This 5-axis DMG MORI Gildemeister CTX 1250 TC was manufactured in 2012, featuring a turning length of 1250 mm and a main spindle speed up to 5000 min⁻¹. It includes a Y-axis travel of 100 mm, B-axis ±110°, and a tool magazine with 24 positions. Ideal for complex machining tasks, it also comes equipped with a Siemens SINUMERIK 840D control system. If you are looking to get high-quality turn-mill capabilities, consider the DMG MORI Gildemeister CTX 1250 TC machine we have for sale. Contact us for more information.

This 3-axis DMG MORI M1 Complete vertical machining center was manufactured in 2022. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the DMG MORI M1 Complete machine we have for sale. Contact us for more information.

This DMG MORI CLX 350 V4 lathe was manufactured in 2021. It features a Siemens 840D control, a D65 spindle, and a D210 chuck. With a spindle power of 16.5 kW and torque of 168 Nm, it operates at up to 5000 RPM. Ideal for precision tasks, the lathe has logged 3,200 operational hours. For more information about this lathe, please reach out to us.