used PEDDINGHAUS for sale

Peddinghaus 210/11 - Profile steel shears - Machine mounted on turntable (Ø 1270 mm) for individual working position Specifications Flat steel shears: - Knife length: 220 mm - Sheets: 11 mm - Flat steel: 120 x 13 mm Profile steel shears: - Stroke rate: approx. 55 /min - Angle iron: 80 x 8 mm - T-iron: 80 x 8 mm - U & I steel: 120 mm Steel bar shears: - Round steel: 32 mm - Square steel: 30 mm Notch: - Sheets: 10 mm - Latch width: 40 mm - Latch depth: 80 mm Hole punch: - Punching capacity: Ø 25 x 11 / Ø 20 x 13 mm Installation: - Motor power: 1.8 kW - Operating voltage: 400 V - Dimensions WxHxD: 1270 x 1900 x 1270 mm - Weight: approx. 1000 kg

Inv. Num. : 8405 Type: Peddimax No 1 Producer: Peddinghaus Created: 2019 Parameters: Operating hours: 150 h Strength: 140 t Pressure: 300 bar Equipment: Flaps

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Offer 22188 Specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm -Min. Roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Roll width outside approx. 260 mm - Roll diameter approx. to max. 100 mm - max. possible number of rolls 13 pcs - 10 pieces of rollers are built-in - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Offer 22187 Roller conveyor height-adjustable Specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm -Min. Roller conveyor height approx. 600 mm - Max. roller conveyor height approx. 1100 mm - Roll width outside approx. 280 mm - Roll length 2 x 125 mm each - Roll diameter approx. to max. 100 mm - max. possible number of rolls 10 pcs - 7 pairs of rollers are built-in - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Maximum punching force: 1100 kN Maximum shear force: 1700 kN Punching projection: 510 mm Large WBL support table on the punching side Holes e.g. 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife and for the profile steel knife Square clinker Weight: approx. 5000 kg Assortment of stamps and dies are included in the price

Punching force: 250 kN For example, punch a 16 mm hole in 12 mm steel Viewfinder via handwheel Range of tools is included in the price

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Range of tools is included in the price

suitable for Peddinghaus profile steel shears Effective length 2,000 mm

working pressure: 300 bar total power requirement: / kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working pressure: 300 bar total power requirement: / kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working pressure: 250 bar total power requirement: / kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 42 mm square edge steel: 38 mm L-beam: 110 x 10 mm cutting capacity: 150 x 16 mm pressure: 60 t hole punching press: throat: 370 mm hole punching press: capacity (dia. x thick.): 25 x 16 / 20 x 19 mm : 720 x 420 mm total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: - mm square edge steel: - mm L-beam: - mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2,212,35 m div. punches and dies Foot switch Spare blade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 5 weight: 5 t : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t plate thickness: 800 mm : keins weight of the machine ca.: 1,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Ja : Stanzkraft 800 kN frequency: 50 Hz current: 17/11 A voltage: 220/380 V round bar steel: 32-17 mm square edge steel: 30-18 mm : 100 x 10 mm flat steel: 350 x 16 mm throat: 200 mm work height max.: 1107 mm total power requirement: 4 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1200 x 700 x 1850 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

volt: 380 V weight: 1,4 t : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 50 mm square edge steel: 45 mm L-beam: 140 x 13 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m ab Standort preiswert gegen Gebot abzugeben! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 60,00 mm Bar diameter: 45 mm Punching size: 510 mm (1) hydraulic / (2) mechanical: 1  

A Peddinghaus cutting and notching system for mitre cutting and weld bevel preparation is available. The main component of the system is the CNC 5-axis notching machine Peddinghaus SACM-1250/A, year of manufacture: 2019. The system is suitable for small to medium-sized steel construction. Intended use: Standard notching, flange thinning, web openings and other common notching shapes. Documentation available. On-site inspection is possible.

A Peddinghaus 214/200 billet shear is available. Cutting capacity: square: 70mm, round: 80mm, flat: 180mm x 35mm/250mm x 28mm, weight: approx. 5000kg.

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -

Manufacturer: Peddinghaus Model: FDB 600 Type of Machine: Flat steel drilling and burning machine Find more here - / Contact us at -

Manufacturer: Peddinghaus Model: MDL1000 Year of Manufacture: 2005 Type of Machine: drilling rig Function: drilling, marking Tool holder: Morse taper Max. material length: 16 m Max. profile height: 1 m Hole size: Ø8 mm - Ø40 mm Number of spindles: 1 Control: Siemens Sinumerik CNC Find more here - / Contact us at -

Ironworker Type: Peddimax No 1 Manufacturer: Peddinghaus Year: 2019 Machine like new, only 100 hours, with accessories. Find more here - / Contact us at -

plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm

5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13Masch. No. 529A059 Year of construction approx. 1970Hole punch: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity 25 mm in 16 mm sheet metal 20 mm in 19 mm sheet projection 365 mmBar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mmFlat steel shears: Cutting capacity at shear angle 5 150 x 13 mm or 200 x 10 mm Knife length 245 mmProfile steel shears: Shear performance angle steel at 90 110

Hand lever shears Pagus 1 BR/6 Sheet thickness: 4 mm Knife length: 180 mm Dimensions: 400x100x1500 Year of construction 1995