used RAS for sale

used beading machine with electrical defect, hardware in good condition Description and order available. New price currently EUR approx. 16,000 without warranty I can only estimate operating hours at about 2000

Rok produkcji: 2007 Waga: 20,000 kg Maksymalna długość robocza: 2560 mm Maksymalna grubość blachy (stal miękka): 2.0 mm Maksymalna grubość blachy (stal nierdzewna): 1.5 mm Maksymalna grubość blachy (aluminium): 3.0 mm Dodatkowe wyposażenie: podajnik wykrojów, narzędzia

with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3

Gr. working width: 1250 mm for sheet metal up to: 1.75 mm Opening width upper beam: 70 mm Adjustability bending brace: 50 mm Space requirement: 1880 x 740 x 1140 mm

Max. sheet thickness: 1.5 mm steel 2 transit stations Weight: approx. 500 kg

Max. cutting length: 2540 mm Max. sheet thickness: 3 mm steel Manually adjustable backgauge from the front up to 550 mm Side stop and table extensions Sheet metal hold-up Knife sharpened Weight: approx. 2500 kg

Specifications: Working length: 4060 mm Bending capacity: 3.0 mm Control with bending simulation: MULTIBEND 901 grafik 2D Automatic adjustment of the bending angle depending on material thickness Bending angle adjustment: 0 – 180° Backgauge motorized adjustable: 10 -1500 mm Max. opening bending beam: 300 mm Bending and lower beam adjustment range : 80 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5500 x 4050 x 2600 mm Weight: approx. 6.8 tons

Max. cutting length: 2540 mm Max. sheet thickness: 2 mm steel Manual backgauge adjustable from the front up to 550 mm Pneumatic sheet hold-up Knife sharpened Weight: 1600 kg

Max. cutting length: 2040 mm Max. sheet thickness: 3 mm steel Manual backgauge can be operated from the front up to 500 mm Side stop and table extensions Pneumatic sheet hold-up Knife sharpened

with manual backgauge 750 mm and sheet metal holding system, cut-down diverter for sorting the parts to the front or rear, plastic-coated hold-down device with single stroke and continuous stroke, very flat cutting angle of only 0.8 degrees for low-torsion cutting Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3100 mm Sheet thickness steel: 2.0 mm Total power requirement: 3.0 kW Machine weight: 1950 kg Dimensions: 3750 x 1650 mm Machine number: 21/3

3-roll round bending machine with wire inserts Folded groove Colour: grey Shaft diameter: 55 mm Power: 1520x0.75 mm Dimensions: 1900 x 550 x 1110 mm Weight: 190 kg Machine number: 324/19 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out

with segmented upper beam H = 110 mm CNC control with motor depth stop Back gauge approx. 1000 mm 3200x2.0 mm, 3.0 mm aluminum, 1.25 mm front Colour: grey Total power requirement: 16 A Motor power: 2.2 kW Opening width: 200 mm LZ: 6 - 8 weeks, machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

sheet width: 2540 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: m Rear stop manually adjustable from the front up to 550 mm Side stop and table extensions Sheet metal holding Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 2,25 mm distance between columns: 2040 mm total power requirement: 7,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,2x1,7x1,1 m SN-No. 380/6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 2040 mm plate thickness: 3,5 mm distance between columns: 2100 mm sheet width: 2040 mm output: 3,7 kw weight of the machine ca.: 2,3 t Baujahr: unbekannt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mm plate thickness: 4 mm cutting angle: 1,49 ° : 40-80 column arm: 200 mm Number of hold downs: 13 Stück back stop - adjustable: 5-1000 mm table height: 750 mm oil volume: 85 l air pressure - required: 5 bar weight of the machine ca.: 3600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 3 mm total power requirement: 4 kW weight of the machine ca.: 3.300 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 2,5 mm Opening width of the upper beam: 200 mm Bending Angle: 0-180 ° engine output: 2,6 kW weight of the machine ca.: 1750 kg dimensions of the machine ca.: 3150x1200x1400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 4000 mm plate thickness: 2,5 mm distance between columns: 4060 mm stroke: 300 mm total power requirement: 3 kW weight of the machine ca.: 5.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1630 mm plate thickness: 3 mm total power requirement: 2 kW weight of the machine ca.: 1300 kg dimensions of the machine ca.: 2360x1250x1280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6040 mm plate thickness: 2 mm total power requirement: 10 kW weight of the machine ca.: 7.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mm plate thickness: 4 mm Opening width of the upper beam: 400 mm Bending Angle: 0-180 ° total power requirement: 7,5 kW dimensions of the machine ca.: 5000x2200x2560 mm weight of the machine ca.: 5500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting length: 3150 mm plate thickness: 4 mm cutting angle: 1,45 ° no. of strokes: 35-80 Hub/min column arm: 200 mm Number of hold downs: 16 Stück rear stop: 5 - 1000 mm table height: 750 mm total power requirement: 7,5 kW weight: 4.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 4,5 mm Folding length: 2540 mm Depth rear gauge: 1500 mm CNC Brand: _Unknown / Other Make RAS Multibend Type 74 . 25 Year 1987 ras MULTIBEND 8000 schwenkbiege Sheet thickness (mm)T = 4.5 mm Folding length (mm)L = 2.540 mm Depth rear gauge (mm)Depth = 1.500 mm 2 sets off toolling Adj. upper beam = 400 mm Bend angle = 0 - 180 Gr  

Ras Control Operator Panel Multicut - Line 2000

Ras 2100 x 3 mm Max sheetthickness: 3 mm Cuttinglength: 2000 mm

: gebraucht : 1976 : 9732 : ca. 2 Wochen ab Auftragse : Deutschland : 3800 € : 1 : 1.5 mm : 2,2 kW : 1660 mm : 480 mm : 1010 mm : 326 kg : 845 mm Roller set for Pittsburgh seam and standing seam User Manual in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual back gauge can be operated from the front up to 500 mm Side stop and table extensions Pneumatic sheet metal support Knife sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual back stop adjustable from the front up to 550 mm Pneumatic sheet metal holding Knives sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3150 mm plate thickness: 1,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,50 t dimensions of the machine ca.: 4,30 x 1,50 x 1,40 m • Automatic bending beam adjustment • Operating instructions • CNC control SYSTEM 4000 • Controlled back stop 6 – 1000 mm • Tool: bending rail and sharp rail The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3190 mm plate thickness: 2,5 mm cutting angle: 1,1 ° : 50 column arm: 100 mm back stop - adjustable: 0-550 mm table height: 750 mm weight of the machine ca.: 2800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3200 mm plate thickness: 4 mm Opening width of the upper beam: 400 mm Bending Angle: 0-180 ° back stop - adjustable: 10-1550 mm weight of the machine ca.: 5800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mm plate thickness: 3 mm : 1,25x Blechdicke : 200 mm Bending Angle: 0-180 ° control: Multibend 2000 weight of the machine ca.: 3250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.