used TOS for sale

Inv. Num. : 7594 Type: OH 6 Producer: TOS Generated: Parameters: Maximum gear diameter: 550 mm Machine weight: 4000 kg

Sell a used TOS Vertical Milling Machine Model FA 3 V. The dimensions of the machine are LxWxH 1900mm x 1700mm x 1900mm. The table size is 1250mm x 250mm. The weight is approx. 1800kg. The recording is SK40. As shown in the photos. If you have any questions, just get in touch. The machine can be viewed and tested under power by prior appointment. On-site loading is no problem and free of charge. Furthermore, the machine can be delivered and unloaded in the immediate vicinity with its own crane truck and against assumption of costs. The sale is without guarantee and warranty. The return is excluded. All information without guarantee.

Turning length 1500 mm Spindle revolutions 2240 rpm Turning diameter over bed 500 mm Turning diameter over support 320 mm Bar Passage 56 mm Accessories: Chisel holder, 3-jaw chuck, face plate

Similar to the Kovo S28 (produced in the early 50s of the 20th century), the TOS S28 was popular in the 1950s and 1960s and was the company's smallest "tool room grade" lathe. It has a center height of 5.5 inches, a distance of 30 inches between centers, weighs 2400 pounds (just over 1 ton), is very bulky, and is mounted on a huge cast iron bracket with chip trays and central lockers. The headstock and helical cut transmission assembly is made of a rigid casting bolted to a 9.875-inch-wide bed with flat surfaces and V-grooves. Like many TOS machine tools built under the control of the Communist Party of Czechoslovakia at the time, it is likely that this lathe was built at more than one site, including Kovo Hodonin and TOS Zebrak. The 1.375-inch-bore spindle runs on adjustable bronze bearings and is driven by a powerful 4-horsepower motor flange via a multi-plate clutch that is mounted t ...

Milling machine Tos FNK25A Quill with Iso40 taper Automatic feed on the quill Automatic feed and rapid traverse on X and Y Rapid traverse on Z Spindle speeds from 56 to 4500 rpm Travel X-Y-Z 800-360-460mm Bed 290x1250mm The head can rotate and tilt The upper slide has a travel of 600 mm and can rotate This gives the machine a long range New digital display Large vise Some tools Maintained and repaired who necessary

HBM H80

faceplate diameter: 315 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. faceplate - diameter 315 mm bore 75 mm fastening: Camlock - 4 Pcs. 173 M 16 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3500 mm y-travel: 2500 mm z-axis: 1250 mm W-axis (spindle longitudinal): 800 mm : ISO 50 P.D.B : 1800x2500 mm : 12 t : 3000 Hertz : 400 total power requirement: 37 kW weight of the machine ca.: t dimensions of the machine ca.: m ATC 40 positions Safety guarding Coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Heidenhain 355 x-travel: 850 mm y-travel: 550 mm z-travel: 450 mm tool taper: SK50 hydraulic vise: documentation: weight of the machine ca.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 180 mm centre distance: 1250 mm : 360 mm spindle bore: 41 mm spindle turning speed range: 11-2800 U/min weight of the machine ca.: 1900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 350 mm weight of the machine ca.: 50 KG tool adaptor: MK5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

content: Daten Folgen cbm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1400 mm y-travel: 630 mm z-travel: 600 mm Control: Heidenhain total power requirement: 15 kW weight of the machine ca.: 5,85 t dimensions of the machine ca.: 1800x630 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1000 mm grinding length: 2000 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning diameter: 1050 mm Turning length: 4000 mm Turret positions: 0 CNC Brand: Heidenhain CNC Model: Manuel Plus Make TOS Variant  Type SUA 100 CNC Variant Year 11 / 2001 tos variant HeidenHain MANUEL PLUS draaibank Centre height (mm)Swing bed =  1.050 Center distance (mm)Swing sup = 730 Spindle bore DBC = 4.000 Bore = 1154 Chuck 800 mm 3 x Steady rest Mot. tailstock Feed top slide Work load 8 T  

Spindle diameter: 105 mm Cross X: 1800 mm Vertical Y: 1250 mm Table length: 1400 mm Table width: 1250 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: TNC 426 Make TOS WH105 CNC Type WH 105 CNC Year 1998 Tos WH 105 CNC with TNC 426 - 5 Axis Spindle diameter (mm)105 / iso50 / 28 kW Table length (mm) L = 1.400 Table width (mm) W = 1.250 Longitudinal X (mm)X = 1.800 Cross Y (mm)Y = 1.250 Z = 1.250 W = 630 CNC TNC 426 - 5 AxisSpeeds 2800 Rpm  

Spindle diameter: 130 mm Cross X: 3500 mm Vertical Y: 2000 mm Table length: 1800 mm Table width: 1600 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: TNC 415 Make TOS WH13 CNC Type 1996 Year Heidenhain TNC 415 - 5 Axis tos wh13 cnc cnc table borer tisch bohrwerk kotter Spindle diameter (mm)130/iso50/37kw Table length (mm)1800 Table width (mm)1600 Longitudinal X (mm)3500 Cross Y (mm) 2000 Pos ATC 1250 Number APC.w = 800 1500 rpm      

Spindle diameter: 130 mm Cross X: 3500 mm Vertical Y: 2000 mm Table length: 2200 mm Table width: 1800 mm Positions ATC: 60   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: TNC 430 Make TOS WHQ13 CNC Type WHQ 13 CNC Year 2004 TNC 430 in 5 Axis Spindle diameter (mm) 130/3000/37kW Table length (mm) L = 2.200 Table width (mm) W = 1.800 Longitudinal X (mm) X = 3.500 Cross Y (mm) Y = 2.000 Pos ATC Z = 1.250 Number APC .W = 800 ATC 60 position 20 bar high pressure coolant  

Spindle diameter: 0 mm Cross X: 2000 mm Vertical Y: 1400 mm Table length: 1400 mm Table width: 1250 mm Positions ATC: 60   Number of pallets: 2   CNC Brand: Heidenhain CNC Model: TNC 415 Make TOS WHN11 Type WHN 110 MC Q Year 1994 TNC 415 in 5 Aixs Spindle diameter (mm)110/iso50/37kW Table length (mm)L = 1.400 Table width (mm)W = 1.250 Longitudinal X (mm)X = 2.000 Cross Y (mm)Y = 1.400 Pos ATCZ = 1.250 Number APC.W = 500 Spindle 2500 Rpm ATC chain 60 positionsPallet changer 2 x

Table length: 1800 mm Table width: 1600 mm Longitudinal X: 3500 mm Cross Y: 2000 mm Vertical Z: 800 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 415 Make TOS WHN13 CNC Type WHN 13 CNC Year 1996 TNC 415 in 5 Aixs Spindle diameter (mm) 130/iso50/37kW Table length (mm) L = 1.800 Table width (mm) W = 1.600 Longitudinal X (mm)X = 3.500 Cross Y (mm) Y = 2.000 Pos ATC Z = 800 Number APC.W = 1.250 Speeds 1500 Rpm Rapid = 8000 mm Feed = 6000 mm  

Center height: 840 mm Center distance: 2000 mm Spindle bore: 128 mm Make TOS SUA 8 Type Celakovice SUA 80 Numeric Year 2001 TOS Celakovice SUA 80 Numerisch gesteuerte Centre height (mm) Swing bed = 840 Center distance (mm) DBC = 2.000 Spindle bore Bore = 128 HeidenHain Manuel Plus Steady rest fixed 3 chuck 500 mm  

Table diameter: 1000 mm Turning diameter: 0 mm Turning height: 630 mm Motor power: 40 HP/kW Positions ATC: 0   Positions APC: 0   Make TOS SKJ 8F Type SKJ 8 F Year 1984 Singel column vertical borer TOS SKJ 8 F Centre height (mm)Swing = 1.000 Center distance (mm) Height = 630 Spindle boreLoad = 2.500 Kg Speeds = 500 Rpm5 pos. revolver 2 axis digital read out

Table length: 3000 mm Table width: 800 mm Longitudinal X: 3000 mm Cross Y: 800 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 355 Make TosTypeFSS-8 Year 1991 Tos FSS 80 CNC bedmilling machine Table length (mm) 3000 Table width (mm) 800 Longitudinal X (mm) 3000 Cross Y (mm) 800 Vertical Z (mm)1000 630 mm CNC Rotary table Iso 50 Automatic head CNC Heidenhain TNC 355

Spindle diameter: 130 mm Cross X: 5000 mm Vertical Y: 3000 mm Table length: 2500 mm Table width: 1800 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 Make TOS WHN13CNC Type WHN 13 CNC Year 2008 iTNC 530 in 5 Axis Spindle diameter (mm) 130/46/3000 Table length (mm)L = 2.500 Table width (mm)W = 1.800 Longitudinal X (mm)X = 5.000 Cross Y (mm)Y = 3.000 Pos ATCZ = 1.250 Number APC.W = 800 Load = 25 Ton Table index 0.001 Gr Coolant true spil 17 Bar Chip conveyor Spindle extensions Optional milling head HUR 50 Optional Milling head HOI 50  

Center height: 0 mm Center distance: 4000 mm Spindle bore: 102 mm Make TOS SU 125 Type SU 125 x 4 Year 80 er Heavy Duty turning lathe Centre height (mm)Swing bed = 1.250 Center distance (mm)Support = 940 Spindle bore DBC = 4.000 Bore = 1024 chuck 1250 3 x steady rest  

Table length: 1800 mm Table width: 630 mm Longitudinal X: 1400 mm Cross Y: 630 mm Vertical Z: 630 mm Positions ATC: 0   SPECIFICATIONS X - Travel  1400 mm Y - Travel  630 mm Z - Travel  630 mm bed / plano / portal / moving column Universal bed milling Controll  3 axis digital read out Table Length x Width  1800 x 630 mm Spindle Taper  Bt 50kW power on spindle 22 kW

Two similar TOS CNC bench drilling machines (built in 1986 and 1989) with the same parameters are available. Travel X/Y/Z/W: 1200mm/1100mm/1000mm/600mm, spindle diameter: 100mm, tool holder: ISO 50, max. table load: 3000kg, table: rotary table, accuracy X/Y/Z: +/-0.02mm, control: Heidenhain TNC 135, including various angles, cutter heads, milling cutters, tool holders and other items. Documentation available. On-site inspection is possible. Individual sale possible.

Vertical lathe Type: SK 12 Manufacturer: TOS Max.workpiece height: 710 mm Max.workpiece diameter: 1250 mm Clamping plate diameter: 1180 mm Max.diam. of peripheral turning: 1250 mm Max. diameter of face turning: 1350 mm Power of the main electric motor: 45 kW Dimensions: 2360 x 3860 x 4260 mm Machine weight: 18300 kg In good condition, under power Find more here - / Contact us at -

Vertical lathe Type: SKJ 10 B Manufacturer: TOS Max machining diameter: 1300 mm Clamping plate diameter: 1000 mm Max workpiece height: 1150 mm Max workpiece weight: 2500 kg Horizontal slide travel: 750 mm Tool turret: 5 positions Main motor power: 40 kW Dimensions: 4100 × 3400 × 3100 mm Machine weight: 13500 kg In good condition, under power Find more here - / Contact us at -

CNC horizontal milling machine Type: FC 63 H SCA Manufacturer: TOS Overhaul: 2003 Control: Heidenhain Table: 630 x 1600 mm X: 1250 mm Y: 315 mm Z: 400 mm Spindle speed: 14 – 1400 rpm Main motor power: 7.5 kW Spindle taper: ISO 50 Machine weight: 11000 kg Included vice, tools, divider In good condition, under power Find more here - / Contact us at -

CNC vertical lathe Type: SKJ 12 NC Manufacturer: TOS Control: Mefi Max workpiece diameter: 1400 mm Clamping plate diameter: 1250 mm Maximum workpiece height: 1150 mm Maximum workpiece weight: 6000 kg Clamping plate speed: 2.5 - 225 rpm Main motor power: 37 kW Machine weight: 13000 kg In good condition, under power Find more here - / Contact us at -

Vertical lathe Type: SK 12 Manufacturer: TOS Year: 1961 Overhaul: 1971, 1992 Max.workpiece height: 710 mm Max.workpiece diameter: 1250 mm Clamping plate diameter: 1180 mm Max.diam. of peripheral turning: 1250 mm Max. diameter of face turning: 1350 mm Power of the main electric motor: 45 kW Dimensions: 2360 x 3860 x 4260 mm Machine weight: 18,300 kg Fully functional, under power Find more here - / Contact us at -

CNC vertical lathe Type: SKIQ 8 CNC A Manufacturer: TOS Year: Max.workpiece diameter: 1100 mm Clamping diam.of rotary table: 800 mm Max.table load: 4000 kg Max. workpiece height: 690 mm Slide extension (Z): 630 mm Slide section 180x200 mm Table revolutions 2 - 400 rpm Tool magazine: 15 positions Main motor power: 58 kW Digital readout Machine fully functional, under power Find more here - / Contact us at -

CNC horizontal boring machine Type: WHN 9 B-CNC Manufacturer: TOS Year: 1980 Overhaul: 2007 Control: Heidenhain Spindle diameter: 90 mm Spindle taper: ISO 40 Spindle speed: 9 – 1120 rpm Main motor power: 30 kW X: 1250 mm Y: 900 mm Z: 1000 mm W: 680 mm B: rotary table 360• Table: 1000 x 1120 mm Max table load: 3000 kg Dimensions: 4200 × 2410 × 2780 mm Machine weight: 12,000 kg In good condition, under power Find more here - / Contact us at -

CNC horizontal boring machine Type: WH 10 CNC Manufacturer: TOS Year: 1988 Control: Heidenhain Spindle diameter: 100 mm Spindle taper: ISO 50 Spindle speed: 10 – 2,500 rpm Main motor power: 34 kW X: 1250 mm Y: 1100 mm Z: 940 mm W: 710 mm B: rotary table 360• Table: 1120 x 1000 mm Max table load: 3000 kg Machine weight: 13500 kg In very good condition, under power Find more here - / Contact us at -

CNC vertical lathe Type: SKIQ 12 CNC Manufacturer: TOS Control: Mefi Clamping plate diameter: 1250 mm Maximum turning diameter: 1700 mm Maximum workpiece height: 1335 – 1785 mm Maximum workpiece weight: 12000 kg Clamping plate speed: 2.5 – 500 rpm Main motor power: 40 kW Tool magazine: 15 positions Slide stroke (Z): 1000 mm Vertical crosshead movement: 800 – 1250 mm Slide dimensions: 180 × 200 mm Dimensions: 6100 × 5050 × 5255 mm Machine weight: 27000 kg In good condition, under power Find more here - / Contact us at -

CNC vertical lathe Type: SKIQ 12 CNC Manufacturer: TOS Control: Mefi Clamping plate diameter: 1250 mm Maximum turning diameter: 1700 mm Maximum workpiece height: 1335 – 1785 mm Maximum workpiece weight: 12000 kg Clamping plate speed: 2.5 – 500 rpm Main motor power: 40 kW Tool magazine: 15 positions Slide stroke (Z): 1000 mm Vertical crosshead movement: 800 – 1250 mm Slide dimensions: 180 × 200 mm Dimensions: 6100 × 5050 × 5255 mm Machine weight: 27000 kg In good condition, under power Find more here - / Contact us at -

Vertical lathe Type: SK 16 Manufacturer: TOS Clamping plate diameter: 1620 mm Maximum turning diameter: 1700 mm Maximum workpiece height: 1380 mm Maximum workpiece weight: 5000 kg Clamping plate speed: 3 - 150 rpm Main motor power: 37 kW Vertical movement of the left slide: 800 mm Vertical movement of the right slide: 630 mm Horizontal movement of the side slide: 630 mm Vertical movement of the crossbar: 950 mm Dimensions: 4550×2700×4730 mm Machine weight: 20000 kg In good condition, under power Find more here - / Contact us at -

CNC horizontal boring machine Type: WHN 13.8 B Manufacturer: TOS Year: 1987 Control: Mefi Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW Spindle speed: 1 – 2800 rpm X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In very good condition, under power Find more here - / Contact us at -

CNC horizontal boring machine Type: WHN 13.8 C Manufacturer: TOS Year: 1990 Control: Mefi CNC 872 iTD Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW Spindle speed: 1 – 2800 rpm X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1600 x 1800 mm Max table load: 12000 kg Machine weight: 36000 kg In very good condition, under power Find more here - / Contact us at -

CNC horizontal boring machine Type: WHN 13.8 A-CNC Manufacturer: TOS Year: 1979 Overhaul: 2007 Control: Heidenhain Spindle diameter: 130 mm Spindle taper: ISO 50 Main motor power: 37 kW Spindle speed: 1 – 2800 rpm X: 3500 mm Y: 2000 mm Z: 1250 mm W: 800 mm Table: 1800 x 2200 mm Max table load: 12000 kg Machine weight: 36000 kg In very good condition, under power Find more here - / Contact us at -

Gear hobbing machine Type: FO 16 Manufacturer: TOS Maximum module: 16 mm Maximum gear diameter: 2500 mm Worktable diameter: 1100 mm Maximum tooth length: 460 mm Maximum workpiece weight: 7000 kg Main motor power: 22 kW Machine weight: approx. 23,000 kg In good condition, under power Find more here - / Contact us at -

Gear hobbing machine Type: FO 16 Manufacturer: TOS Maximum module: 16 mm Maximum gear diameter: 2500 mm Worktable diameter: 1100 mm Maximum tooth length: 460 mm Maximum workpiece weight: 7000 kg Main motor power: 22 kW Machine weight: approx. 23,000 kg In good condition, under power Find more here - / Contact us at -

Cylindrical grinding machine Type: BUC 63 B/2000 Manufacturer: TOS Year: 1988 Maximum grinding diameter: 630 mm Maximum grinding length: 2000 mm Center height: 320 mm Maximum workpiece weight between centers: 3000 kg Grinding spindle motor power: 22 kW Workpiece spindle motor power: 3.0 kW Internal grinding motor power: 3.0 kW Grinding wheel dim: 750×100×305 mm Machine weight: approx. 15,700 kg In good condition, under power Find more here - / Contact us at -

Grinding machine Type: BUC 63 A/4000 Manufacturer: TOS Year: 1982 Max. grinding diameter: 630 mm Distance between the tips: 4000 mm Max. workpiece weight: 2500 kg Total power of the machine: 18 kW Machine weight: 19400 kg Machine in good condition, fully functional Find more here - / Contact us at -

Gear shaping machine Type: OHA 50 A Manufacturer: TOS Maximum gear diameter: 500 mm Minimum gear diameter: 50 mm Maximum module: 8 Minimum module: 1.5 Maximum gear width: 125 mm Maximum number of teeth: 300 Clamping table diameter: 500 mm Table hole diameter: 120 mm Main motor power: 15 kW Dimensions: 2510 × 1470 × 2000 mm Machine weight: 5200 kg In good condition, under power Find more here - / Contact us at -

Vertical lathe Type: SK 12 Manufacturer: TOS Year: 1976 Max.workpiece height: 710 mm Max.workpiece diameter: 1250 mm Clamping plate diameter: 1180 mm Max.diam. of peripheral turning: 1250 mm Max. diameter of face turning: 1350 mm Power of the main electric motor: 45 kW Dimensions: 2360 x 3860 x 4260 mm Machine weight: 18300 kg In good condition, under power Find more here - / Contact us at -

This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information.

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.