사용 weinig unimat 300

WEINIG Unimat 300, S/N 104754, YOC 2005 • Planing width max. 230 mm • Planing height max. 120 mm • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 5.5 KW • 3rd spindle left • 4th spindle top 5.5 KW • Feed rate 6 + 12 m/min. • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatically 'high-low controlled' • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Sliding roller in the run-out table • Digital displays • Manual lubricant pump with foot pedal • Central positions of the lubrication points • GRP safety hood • Inner light in the safety hood • 4x suction nozzle D=120 mm • Total connection approx. 19 KW Dimensions: Length: 3,320 (3,620 mm outle ...

WEINIG Unimat 300, S/N 104754, YOC 2005 • Planing width max. 230 mm • Planing height max. 120 mm • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 5.5 KW • 3rd spindle left • 4th spindle top 5.5 KW • Feed rate 6 + 12 m/min. • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatically 'high-low controlled' • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Sliding roller in the run-out table • Digital displays • Manual lubricant pump with foot pedal • Central positions of the lubrication points • GRP safety hood • Inner light in the safety hood • 4x suction nozzle D=120 mm • Total connection approx. 19 KW Dimensions: Length: 3,320 (3,620 mm outle ...

WEINIG Unimat 300, S/N 104754, YOC 2005 • Planing width max. 230 mm • Planing height max. 120 mm • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 5.5 KW • 3rd spindle left • 4th spindle top 5.5 KW • Feed rate 6 + 12 m/min. • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatically 'high-low controlled' • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Sliding roller in the run-out table • Digital displays • Manual lubricant pump with foot pedal • Central positions of the lubrication points • GRP safety hood • Inner light in the safety hood • 4x suction nozzle D=120 mm • Total connection approx. 19 KW Dimensions: Length: 3,320 (3,620 mm outle ...