Model
(Manufacturer: STANKO)
Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg
Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg
Spiral Bevel Gear Generator Stanko 5C280P gear diameter 800 mm, module 16 Max gear ring width 125 mm, Spindle speeds range 20-125 rpm, Main motor power 7,5 kW, Overall dimensions LxWxH 3235x2180x2200 mm, Weight 15 tons.
Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR
Table 1120x4000mm 2 milling and 2 planing heads, and 1 grinding head Workpiece dimensions WxH 1250x1120 Spindle speed: - Vertical (stepless) 5...1800 rpm - Horizontal (4 speeds) 100;200;500;1000 rpm Limits of working feeds at milling: - of a table 25...10000 - Supports and movable-sleeves 5...2500 Stroke length Sliders 300 mm Power of electric motors: -table in a planing mode 90kW -vertical spindle 30kW -vertical horizontal 22/26kW Machine overall dimensions: 10600x5400x4600 mm Machine weight 41t
Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm
Gear slotting 5140, Russia production, with change gears
The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg
Pneumatic air forging hammer STANKO MA4129 Weight of the falling parts: 80 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 140 kg/m Distance from ram axis-to-frame: 300 mm Anvil dimensions: -Length: 130 mm -Width: 63 mm -Anvil height above the floor: 800 mm Diameter of working cylinder: 250 mm Diameter of compressor cylinder: 260 mm Stroke run: 385 mm Optimal stamping section of work-piece: -Square: 60 mm -Rounded: 80 mm Overall dimensions mm: -Length: 790 mm -Width: 1566 mm -Height: 1900 mm Weight of the hammer with an anvil-block: 3100 kg Price 3100 EUR
Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm
Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR
- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016
Hydraulic cold stamping press Stanko P0443(Odessa), 1988. capacity 2000 tons. table 1000 x 1000 mm.,stroke 500 mm.,weight 27 ton.,price - 25000 EUR
Max mass of drop parts 150 kgs. Price 3400 EUR
turning diameter over bed: 1000 mm spindle passage: 128 mm turning length: 5000 mm total power requirement: 22 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2050 mm plate thickness: 8 mm distance between columns: mm electrical: . weight of the machine ca.: 6,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 440 mm throat: 420 mm workpiece height: 200 mm cutting speed: 20 - 1550 m/min table surface area: 560 x 560 mm band length: 3250 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning diameter over bed/over slide: 400/220mm, turning length: 1000mm, control: AXESTA, with three-jaw chuck.
rotary table dia.:400 mm weight of the machine ca.:130 kg dimensions of the machine ca.:500 x 600 x 160 mm
x-travel:630 mm y-travel:200 mm z-travel:360 mm total power requirement:7,5 kW weight of the machine ca.:2,5 t dimensions of the machine ca.:1500 x 1800 x 1900 mm spindle taper:SK40 table-size:250 x 1100 mm
Stroke: 1 mm Throat: 1 mm Table diameter: 1 mm Slotting machineSTANKO - 7D430 MACH-ID 9116 Make: STANKO Type: 7D430 Year: 1994 Show price Request quotation Length:3000mm Width:2200mm Height:3000mm Weight:6150kg
turning diameter over bed: 1000 mm spindle diameter: 128 mm turning length: 8000 mm total power requirement: 22 kW weight of the machine ca.: 20 t dimensions of the machine ca.: m only one steady is for sale Belt drive shaft bearing damage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Slot head for milling machine, milling head, CCCP / USSR STANKO Type 1502Nr: 200 Year of construction 1974Stroke size: max. 60 mmStroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plateHole spacing machine-flange plate: 245 x 185 mmMounting hole: 17 mmCentering diameter on the machine flange plate: 190 mm- Stroke size adjustable via eccentric adjustment- The drive is as with the normal vertical head from the machine gearbox- Drive via driver, centric in the centering diameter- Degree scaling at the
Stanko Ø 540 x 2000 mm Distance between centers: 2000 mm Swing over bed: 540 mm Swing over cross-slide: 280 mm Diametre of main spindle bore: 52 mm
