Model
(Manufacturer: DOOSAN)
Key data: 32 KW, 40 kVA, 400 V
Make Doosan Model: G40 Year of manufacturing: 2012 Serial nr: G0400320 Working hours (on servicemeter): 10196 Capacity (KvA) 40 Capacity (Kw) 32 Engine make Mitsubishi Engine model S4S-Z3DT61SD Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Rpm 1500 Amperes (A) 57.7 Dimensions LxWxH (mm) 2500 x 1050 x 1900 Weight (Kg) ca 1760 Total quantity in stock 1 Country of origin United Kingdom Comments Running condition and gives power, fair used generatorset
Doosan CHP in good condition. It has the following specifications: Manufacturer: Doosan Type: BGA220 Fuel: Gas Year of construction: 2008 Kva: 600 Mass: 3740 Other specifications: 10 cylinder, electrical panel included.
CNC lathe DOOSAN PUMA TT 1800 SY with: FANUC 18i-TB controller, synchronous spindle, powered tools, 2x C-axis, Y-axis 2x Revolver, Parts Conveyor Belt, Conveyor Bar loading magazine FMB TURBO 8-80
Inv. Num. : 6699 Type: LYNX 220 LSA Produzent: DOOSAN Erzeugt: 2012 Parametern: Steuerungssystem: FANUC iSeries Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 300 mm Maximaler Drehdurchmesser über Bett: 600 mm Maximaler Drehdurchmesser über Support: 400 mm Maximale Spindeldrehzahl: 6000 1/min Max. Stangendurchmesser: 51 mm Länge: 2763 mm Breite: 1627 mm Höhe: 1655 mm Gewicht: 3400 kg Ausstattung: Gegenspindel Stangenlader Hydrobar
Key data: 760 mm, 1540 mm
CNC turning/milling center DOOSAN PUMA MX2600ST Year of construction 08-2012 Fanuc 31i-A with Manual Guide i Max. turning diameter: 760 mm Max. swing diameter over bed: 1,000 mm Max. turning length: 1,540 mm Max. bar passage: 76 mm Travel: X1 axis: 630 mm Y1 axle: 230 mm Z1 axle: 1,585 mm B-axis: -120° + 120° X2 axis: 220 mm Z2 axis: 1,515 mm A-axis: 1,550 mm Spindle motor main spindle 22/26 kW Spindle nose A2-8 Max. spindle speed 4,000 rpm Spindle motor sub-spindle 22/26 kW Max. spindle speed 4,000 rpm Spindle nose A2-8 Spindle motor milling spindle 22/18.5 kW Capto C6 Max. spindle speed 12,000 rpm B-axis, 0.001° Tool magazine with 40 tool positions Lower turret, 12-speed BMT65P Max. speed driven tools: 4,000 rpm Cooling by the spindle, 1.5 kW, 2.0 MPA, 21.6 l/min Coolant pump for lower turret, 2.2 kW, 1.0 MPA, 30l/min Coolant for powered tools Co ...
Catalog No. : 7622 Type: PUMA 2100 MS Producer: DOOSAN Made in: 2013 Characteristic: Control system: FANUC Total hours: 77836 h Hours on: 24037 h Maximum-turning length: 520 mm Max. turning diameter: 406 mm Maximum travel length in the X-axis: 259 mm Maximum feedrate in the Z axis: 589 mm Length: 3100 mm Width: 1861 mm Height: 1899 mm Weight: 5000 kg Equipment: Späneförderer Pump 15 bar 4 tool holders Live Tools (two radial and two axial)
Inv. Num. : 7621 Type: LYNX 2100 GA Produzent: DOOSAN Erzeugt: 2021 Parametern: Steuerungssystem: DOOSAN FANUC iSeries Einschaltstunden: 4017 h Betriebsstunden: 130 h Maximal-Drehlänge: 510 mm Max. Drehdurchmesser: 350 mm Maximale Länge Verfahrweg in der X-Achse: 205 mm Maximale Länge Verfahrweg in der Y-Achse: 105 mm Maximaler Vorschub in der Z-Achse: 560 mm Länge: 1595 mm Breite: 2570 mm Höhe: 1693 mm Gewicht: 3480 kg Ausstattung: Platzsparender Stangenlader 8 Stück Werkzeughalter
DoosanPuma 3100LM serial number ML0117-000145 turning 600 mm number of tool changer stations 12 coolant pump yes chip conveyor yes CNC control, brand, type Siemens sinumerik 828D dimension L 5300 mm dimension W 2100 mm dimension H 3200 mm
Doosan NHP5000 Horizontal Machining Center Year: 2020 Highlights: Fanuc 31i-Model B CNC Control Coolant Thru Spindle (MP Coolant Systems) Doosan LPS 5000 - (12) Station Pallet Pool System Renishaw OMP60 Spindle Probe Broken Tool Detection MistFit MF550 Mist Collector RTS-AA Touch Tool Setter LIKE NEW, Only 257 Cutting Hours Control Type Fanuc 31i-Model B # Axis 4 Pallet Length 24.8 Pallet Width 24.8 Pallet Load Capacity 3,307 pounds Pallet Indexing (B-Axis) 0.001° X-Axis Travel 31.5 Y-Axis Travel 29.5 Z-Axis Travel 33.5 Rapid Traverse Rate (X/Y/Z) 2,382 ipm Spindle Taper CAT 40 Spindle Speed 15,000 rpm Spindle Motor (HP) 50 hp Tool Changer Capacity 275 Coolant Through Spindle yes Machine Dimensions 234 x 145 x 131 Machine Weight 38,000 pounds
SWING OVER THE BED.. 30.3 SWING OVER SADDLE... 23.2 DISTANCE BETWEEN CENTERS 44.7 MAXIMUM TURNING LENGTH.. 38.5 SPINDLE BORE / BAR WORKING DIAMETER. 5.2/ 4.6 SPINDLE SPEED... 20 TO 2,000 RPM SPINDLE NOSE A2 #11 C-AXIS INDEX ANGLE.. 0.001 DEGREES RAPID TRAVERSE (X/Z AXIS)... 630/790 IPM MAXIMUM CUTTING FEEDRATE 19.7 IPR TURRET.. 12 POSITIONS ROTARY TOOL MOTOR... 15 HP ROTARY TOOL SPEED... 3,000 RPM TAILSTOCK QUILL DIAMETER 4.7 QUILL TRAVEL 4.7 MAIN SPINDLE MOTOR.. 50 HP MACHINE DIMENSIONS... 166 X 94 X 89 TALL APPROXIMATE MACHINE WEIGHT.. 21,400 LBS EQUIPPED WITH DOOSAN FANUC i SERIES CNC CONTROL 2 SPEED GEARED HEAD PROGRAMMABLE TAILSTOCK 20 3-JAW SMW AUTO BLOK CHUCK TOOL SETTER LNS MODEL MF-2 CHIP CONVEYOR 4 LIVE HOLDER (2) RADIAL (2) ANGLE
Bar stock capacity...2.56 Max swing (inches)...20.08 Spindle motor (hp)...20 HP Chuck size (inches)...8 Maximum turning length..20.7 Tailstock quill stroke..3.14 Maximum turning diameter12.6 X - axis travel (inches).6.89 Z - axis travel (inches).21.65 Rapid traverse rates x, z...1181 PM / 1417 IPM Maximum swing over carriage..11.42 Spindle nose / spindle bore...A2-6 / 2.99
Key data: 560 mm, 978 mm, 2 1/min
Fanuc 32-i Model A incl. manual guide i Max. turning diameter 560 mm Max. turning length 978 mm Max. bar passage 117 mm Spindle motor 22/30 kW A2-11 Spindle Nose Max. spindle speed 2,000 rpm 12-speed tool turret, BMT75 Driven tools max. speed 3,000 rpm Tailstock Toolsetter Automatic door Coolant pump 10 bar Chip conveyor, LNS 1 piece of 15 3-jaw chuck 1 pc 18 3-jaw chuck Tool holders: 2 x axially applied, 2 x radially applied, 8 x fixed
We offer you Doosan DX255 NLC-5 crawler excavators from a recent sale. Year of manufacture 2018 Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 31840 Hessisch Oldendorf The sale is without warranty Subject to prior sale
From a recent sale, we offer you Doosan DX300 NLC-7 crawler excavators. Year of construction 2021 Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 31840 Hessisch Oldendorf The sale is without warranty Subject to prior sale
We offer you Doosan DX235 LC-5 crawler excavators from a recent sale. Year of construction 2019 Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 31840 Hessisch Oldendorf The sale is without warranty Subject to prior sale
Listing ID: 22693 Brand Engine: Doosan Model: L126 TIM Power: 400 PS (294 kW) RPM: 2100 General condition: Very low hours only test hours Features: Flywheel housing: SAE-1 Flywheel: 14 inch Starter: 1 x 24V Governor: Mechanical Exhaust system: Water cooled Turbo: Water cooled Cooling system: H-E cooled Weight: 1060 kg Dimensions (cm) 150x90x130
DOOSAN PUMA 2100 MS / CNC Lathe. 2011 Model 10.inc double spindle 2 x C-axis + B-axis – drive tools. Control unit: FANUC i – Series, 5 axes: (X-Z-B-C1-C2) Counter-axis: 2 (B&C2) Max. working diameter - 260 mm Max. working length - 520 mm Z-axis. 590 mm B-axis. 590 Spindle speed 4500 rpm Turret tool holder: 12 pieces Linear slide A: 2 (XZ) Rotation A: 1 (C) Spindle: 40 mm The weight of the machine is approx. 5,800 kg Lathe is ONLY 5100 hours run at aluminum work, Lathe accessories. Sawdust Transfer Pump + Transformer + Machine Documents, Additional: 2 tool holders and 1 C-axis live mold are included, BREUNING Drive 1250 mm Loading Magazine, Very nice South Korea CNC machine.
equipped with Top Automazioni Fusion 350 barfeed new in 2021, Lns Turbo HB chip conveyor, well tooled, Doosan-Fanuc i-Plus iHMI Control, IMMEDIATELY AVAILABLE.
Manufacturer DOOSAN Model NM 410HS Year 2008 CNC CNC Fanuc 2liM-B Table Table surface 920 × 430 mm Max weight allowed on table 600 kg T slots 4x125x18H Travels and feeds Travels (X/Y/Z) 762/410/510 mm Distance from table top to nose head 150 – 660 mm Distance from spindle center to column guideway 457 mm. Rapid feed (X, Y, Z Axis) 48.000 mm/min Cutting feedrate (X, Y, Z) 1-24.000 mm/min Main spindle Taper BT40 Spindle Speeds 20.000 rpm Spindle head 11/18.5 kW Spindle torque 60 Nm Automatic Tool Changer Postions in magazine 3 0 Tool selection type RANDOM Max tool diameter (full magazine) 90 mm Max tool diameter (alternative) 150 mm Max tool length 300 mm Max tool weight 8 kg Tool change time (tool to tool) 1.5 s Equipment Rigid Tapping INCLUDED Portable handwheel INCLUDED Longitudinal chip conveyor INCLUDED Internal coolant INCLUDED Coolant tank ...
Inv. Num. : 5837 Type: LYNX 220 LSYC Producer: DOOSAN Created: 2018 Parameters: Control system: DOOSAN FANUC-i Duty cycle: 8205 h Maximum turning length: 510 mm Max. turning diameter: 300 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Controlled axes: X/Z/Y/C1/C2/B Maximum travel length in the X-axis: 205 mm Maximum feed rate in the Z-axis: 560 mm Axis Y: 105 mm C1/C2 axis: 360 Maximum main spindle power: 15 kW Spindle clearance: 76 mm Minimum main spindle speed: 45 1/min Maximum spindle speed: 4500 1/min Maximum workpiece weight: 300 kg Maximum travel length in the B-axis: 560 mm Max. passage of bar material: 65 mm Length: 2880 mm Width: 1710 mm Height: 1920 mm Weight: 4200 kg Equipment: Bar feeder SS 2500 Conveyor
Inv. Num. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC 31i-B Duty cycle: 8981 h Maximum turning length: 600 mm Maximum turning diameter over bed: 300 mm Maximum turning diameter over support: 230 mm Number of spindles: 2 pieces Maximum main spindle power: 22 kW Spindle clearance: 76 mm Maximum spindle speed: 5000 1/min Maximum workpiece weight: 120 kg Max. rod diameter: 65 mm Axis X1/X2: 165/190 mm Axle Z1/Z2: 700/720 mm Axis Y: 100 mm B-axis: 770 mm C1/C2 axis: 360 Weight: 7800 kg Equipment: Bar feeder SS 2500 Conveyor Feeder/Dispenser
DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...
DOOSAN LYNX 220 LSYC 5-AXIS CNC turning center was built in 2014 in South Korea. In order to meet all production requirements, the machine uses state-of-the-art components and technologies, which combined with an extremely stable design offer the best precision and turning performance in its class. In addition, the offered equipment allows even the most intensive machining process to be streamlined and fully automated in any production facility. Workpieces with a maximum length of 510 mm are machined inside a large working area with two high-speed spindles. During the machining process, the specially designed bed of the machine effectively dampens all vibrations and oscillations, resulting, e.g. in improved workpiece surface quality and increased tool life. The offer includes a wide range of equipment, such as the Y axis, bar feeder, measuring probe and the intuitive DOOSAN FANUC i ...
Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.
KOMPRESOR DOOSAN 7/51 5,10m3 2014r Compresor DIESEL DOOSAN 7/51 maszyna po serwisie Dane techniczne: wydajność 5.10 m3/min; ciśnienie robocze 8,6 bar; ROK produkcji 2014; Silnik; YANMAR Przebieg 1019H Kompresor w pełni sprawny,gotowy do pracy,udzielamy gwarancji Cena net: 33500 zł Cena gross: 41205 zł Poniżej znajduje się link do wideo , pokazujący prace maszyny .
DOOSAN Z340SM Double mirror / double turret / C1 + C2 - Axis - Driven / CNC Milling Center, Control: Fanuc Series 18 - T, Note: With the exception of the A6 collets on the lathe, On request, 2 pieces of 10-inch mirrors can be supplied. Upper spindle speed 50 - 5000 rpm Lower spindle speed 60 - 6000 rpm Upper tool holder 12 pieces Lower tool holder 12 pieces The weight of the machine is 6,000 kg Lathe accessories. Chip conveyor Pumpali Too: 4 VDI40 driven tool holders and Live molds are available for 2 VDI40 C-axes. In the picture is the German-made 1800 mm driver with loading magazine,
Inv. Num. : 7400 Type: GT 2100 Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC Maximum turning length: 562 mm Max. turning diameter: 390 mm Maximum turning diameter over bed: 600 mm Maximum travel length in the X-axis: 230 mm Maximum feed rate in the Z-axis: 580 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Number of tools: 10 pieces Length: 3890 mm Width: 1628 mm Height: 1700 mm Weight: 3500 kg Equipment: Technical Documentation Conveyor Shovel Collets Bake Knife Collet head Universal three-jaw head Cutter head with 10 positions Programmable tip/spring 2023/3: Replacement of bearings in the spindle
Inv. Num. : 7399 Type: PUMA 3100 Producer: DOOSAN Created: 2015 Parameters: Control system: FANUC Max. turning length: 760 mm Max. turning diameter: 525 mm Maximum travel length in the X-axis: 293 mm Maximum feed rate in the Z-axis: 830 mm Spindle speeds: 2800 1/min Maximum main spindle power: 22 kW Number of tools: 10 pieces Length: 4095 mm Width: 1978 mm Height: 2010 mm Weight: 5850 kg Equipment: Conveyor Programmable tailstock/quill 3-jaw chuck 2022/8: Replacement of bearings in the spindle
Manufacturer DOOSAN Model PUMA 3100L Year / Month 2013 / 07 CNC FANUC i SERIES Capacities Ø Swing over bed 850 mm. Ø over front door 720 mm. Ø swing over cross-slide 670 mm Max turning diameter 525 mm. Max turning length 1280 mm. Chuck size 12.5” Bar working diameter 102 mm. Travels and feedrates X travel 293 mm. Z travel 1.280 mm. Rapid traverse rate X/ Z Axis 30 m/min. Main spindle Max spindle speed 2.800 rpm Speed ranges 2 Main spindle power 22 kW Main spindle torque 6.605 Nm Spidle nose A2 – 11 Turret No of tool stations 10 Turret tool size 25 x 25 mm Max boring bar size 50 mm. Indexing Time 0,15 s Tailstock Quill diameter 100 mm Quill travel 100 mm Quill bore taper MT#5 Equipment Chip conveyor INCLUDED 3 Jaw-Hydraulic chuck Ø315 mm INCLUDED Automatic Tool pre-setter INCLUDED Hydraulic steady rest SMW Autoblock SLU-X-3.2-MS Others T ...
- Control FANUC 31i - model B - Machine hours Control on: 26,400 h Spindle: 4,896 h - 12-speed revolver - 8-speed turret - No driven tools - max rotational diameter 255 mm - max. rod diameter 76 mm -Tailstock - Bar Feeder Interface - Scraper tape conveyor LNS -Auto. Tool Setter - Coolant pump 10 bar, 30 l/min Machine weight 7,000 kg
