advanced search
3436 results
New in: 2018
used
TECHNICAL SPECIFICATIONS: Clamping Force: 650 ton Shot Weight (Max): 2375 g Distance Between Tie-Bars (H): 1100 mm Distance Between Tie-Bars (V): 960 mm Platen Size (H): 1510 mm Platen Size (V): 1440 mm Screw Diameter: 90 mm Mould Height (Max): 950 mm Mould Height (Min): 450 mm Daylight Between Platens (Max): 1850 mm Opening Stroke (Max): 1400 mm Ejector Force: 9,50 ton Ejector Stroke: 250 mm Screw L/D Ratio: 25 Screw Speed: 190 rpm Screw Torque: 5000 N·m Injection Volume: 2610 cm³ Injection Pressure: 1583 bar Injection Rate: 751 cm³/s Nozzle Force (Max): 15 ton Nozzle Stroke (Max): 700 mm Plasticising Capacity: 123.50 g/s Heating Zones: 9 Heating Capacity: 46.40 kW
New in: 2017
used
Engel E-DUO 740H/740L/700 combi BJ./YEAR 2017 approx. 3871 hrs/h Machine overview: Clamping force: 7000 kN Screw diameter: 40 mm Screw speed: 300 rpm Dosing stroke: 200 mm Control: Engel CC300 Weight: 22 tons Hours: 3871 hours Features: Electric 6-Station Turntable Electrical quick adjustment for the machine plate stroke Two injection units, each with 3-zone screw (D45 mm) 32 zones for hot runner control Electric plasticizing units Full documentation included Status: Ready for use (used) Hours: 3871 Condition of the machine: Already disassembled Defects or missing parts: No known defects, regularly serviced Technical documentation: Complete and available (can be consulted on site)
used
Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...
New in: 2016
used
New in: 2000
used
Year of construction: 2000 Material: PS Butto output up to 1300kg/h Special equipment is the winding machine with which you can cut narrow films from (150mm -100mm) or for example: 8x175mm or 2x700mm The machine has been regularly maintained and is in good condition!
New in: 2013
used
Year of construction 2013 Motor power: 7.5 kW Opening width: 450 mm Opening height: 200 mm Rotor diameter: 180 mm Rotor blade dimensions/number: 6 x225 mm, length 450 mm Strator knife dimensions/number: 4 x 225 mm, length 450 mm Knife material: 1.2080 DIN, hardness: HRC 54-56 Dimensions L x W x H: 930 x 730 x 1420 mm Feed hopper: Noise protection damped Cable capacity: up to 140 kg/h Plastic capacity 80 - 120 kg/h
New in: 1998
used
Engel ES200/45 HLS Year of construction 1998 Clamping force: 45 t Screw diameter 30 mm Installation height min. 180 mm Plate spacing max. 530 mm Without robot/handling
used
Material silos for indoor use made of aluminium Diameter: 1600 cm Volume: approx. 1.5sqm³ ~ 2 tonnes (PET material) For supplying several machines with one type of material. Condition: as good as new
New in: 2003
used
Year of manufacture: 9/2003 Screw ⌀ 35 mm Shot weight: 127 g Injection pressure 2500 bar Shot volume 139 cm³ Clamping force 130 tons. / 1300 kN Tie bar distance: 420 x420 mm Clamping plates: 605 x 605 mm Tool installation height: 250 mm max spacing slabs 750 mm
New in: 2010
used
Year of construction 2010 Piston diameter: 12 mm Volume: 6.5 cm³ with electric heating, without cooling unit
used
1 temperature control unit HB Therm HB 100 U 1 Year of construction 2010 + 1 Easytemp 6/95 temperature control unit Year of manufacture 2007
New in: 2009
used
Single Screw Extruder Cincinnati Talos 45-30 G Year of construction 2009 + Corrugator Maintools MTC 60/90 Year of construction 2006 Both machines are in good condition, and immediately available
New in: 2009
used
Year of Make: 2009 Clamping force: 400 tons Screw diameter: 90 mm Shot Volume: 2481 cm³ Injection pressure increased: 1599 bar incl. removal robot Engel ERC 34 Good condition
New in: 1999
used
Built in 1999 Clamping force: 250 tons. Screw diameter: 70 mm incl. removal robot Engel ERC Machine is in good condition
New in: 2007
used
Arburg 270 C300-100 Year of manufacture 2007 Clamping force: 30 tons. Screw diameter: 20 mm Spraying weight: 28 gr. Max. spray pressure: 2500 bar incl. integrated Arburg Multilift 2 Core moves
New in: 2005
used
Injection Molding Machines KRAUSS MAFFEI KM 420-1900 C2 Stock No.: 503535 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of Make: 2005 Operating hours: 59000 h Technical data closing page Clamping force: 4200 kN Wooden dimension h x v: 800 x 800 mm Panel size h x v: 1270 x 1200 mm Min. installation height: 580 mm Plate spacing max.: 1300 mm Opening travel: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of movable plate D: 200 mm Centering of fixed plate D: 200 mm Tool weight: 6700 kg Technical Data Spray Side Screw diameter: 60 mm Displacement: 769 cc Spray pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing current: 70 g/s PS Outdoor injection flow: 700 g/s hp Number of heating zones: 6 Dimensions & Weight Machine dimensions LxWxH: 6.83m x 2.33m x 2.48m Total Weight: 23090KG Equipment Scree ...
New in: 2004
used
KRAUSS MAFFEI KM 420-1900/55 CZ 2 Component Machine Stock No.: 503534 Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control: MC 4 Year of Make: 2004 Operating hours: 76000 h Technical data closing page Clamping force: 4200 kN Wooden dimension h x v: 800 x 800 mm Panel size h x v: 1270 x 1200 mm Min. installation height: 380 mm Plate spacing max.: 1400 mm Opening travel: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of movable plate D: 200 mm Centering of fixed plate D: 200 mm Tool weight: 6700 kg Technical Data Spray Side Screw diameter: 70 mm Capacity: 1047 cc Spray pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 min Plasticizing current: 95 g/s PS Injection flow to the outside: 953 g/s hp Number of heating zones: 6 2. Aggregate 55 with ø 22 Spray pressure: 1674 bar Volume: 30cm³ Distance sprayer 1 to 2: 300 mm (pig ...
used
Granulator Manufacturer: CONDUX Type: CS 300/600-4 WK Rotor 300 mm diameter x 600 mm wide 3 rotor blades, open rotor Housing with 4 stator knives With drive motor 11 kw (maximum 30 kw on request)
used
HERBOLD Fine Mill PU800 Suitable for soft to medium-hard materials Previously used for plastic fine grinding Grinding discs diameter 800 mm Drive motor 90 kw
used
REFAKT Dryer/Centrifuge/Dry Cleaner Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h, depending on the type of plastic and wall thickness. Drive power 30 kw