used Hydraulic Materials for sale

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

Used fiber laser cutting machine BLM LT 9 Combo Fiber An automated device capable of processing closed and open profiles: pipes, square profiles, rectangular profiles and sheets. Basic information Manufacturer: BLM Adgie Year of manufacture: 2011 Power: 3kW The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos. Additional information - table dimensions: 3000x1500 mm - scope of profile processing: round Ø16÷225 mm square 16x16÷160x160 mm rectangular 16x16÷200x100 mm - Maximum lenght: 6000 mm - maximum cutting thickness of materials: black steel: 20 mm stainless steel 8-10 mm aluminum: 8mm Brass: 5 mm Copper: 5 mm

Plotter - cutter-creaser, digital cutter Make AG Model Kasemake KM600 Year 2000 ? Bed size 158 x 222 cm vacuum bed Capcity up to 15 mm thickness Functions can cut and crease many types of materials including board and plastics, ideal machine for small runs of box making, figures, etc, in any direction Details inclduing the computer + software and license

AGIE AGIECUT CLASSIC 2S wire EDM machine built in 2004 in Switzerland is used for the production of, among others, precision dies, tools and punches. Workpieces with a maximum weight of 450 kg are machined using electrical erosion, which can achieve complex shapes in even the hardest materials. This process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.33 mm, which is threaded through a special AGIEJET system. The workpieces machined in this way do not require any other secondary processes such as polishing to be undertaken. The AGIECUT CLASSIC V2 wire EDM machine also features an intuitive CNC control with many useful functions. It is possible to purchase the dedicated cooler shown in the photos at an additional cost – price negotiable. The AGIE EDM machine weighs 2580 kg. Technical specifications of the AGIE AGIECUT CLASSIC 2S EDM machi ...

AGIE AGIECUT EXCELLENCE 2 wire EDM machine built in 1999 in Switzerland, is used in the production of e.g. precision dies, tools and punches. For the machining of workpieces, the machine uses advanced electrical erosion technology which makes it possible to achieve difficult shapes in even the hardest materials. The use of this method further minimises or completely eliminates the need for other secondary processes, such as polishing. The AGIE EDM machine is equipped with a state-of-the-art AGIEVISION CNC controller and brushless axis servo motors to guarantee the highest machining accuracy and precision in the shortest possible time, with low energy consumption at the same time. The machine also comes with among others an integrated generator, a semi-automatic wire threading system and the AGIESETUP 3D measuring probe for automatic detection of the plane and position of the workpiece ...

Offer 24569 Specifications: - Max. material thickness at 40 kg/mm² strength: 4 mm - Max. projection 260 mm - Working depth approx. 250 mm - Roller center distance 50 mm - Roller holder 50 mm - Shaft thickness 85 mm - Working speed 8 m/min - Right + Left Rotation - hydr. Lining of the upper roller - Drive 400 V / 2.2 kW - Space requirement approx. W 700 x H 1450 x D 1650 mm - Weight approx. 700 kg - With: - Separate control panel with E-foot button - Roller sets

ALLCOMP UNICUT 3C5018 automatic cutting machine was built in 2017 (launched in 2018) by the Polish company Allcomp Polska Sp. z o.o. The machine, designed for the production of clothing and all sewing products, enables the machining of both single and multi-layered materials. The machining process is performed by a working head with a robust oscillating knife, which offers the highest cutting precision and shape repeatability regardless of the type of material. The innovative technical solutions used in the machine eliminate vibrations when working with the high oscillation speed of the knife (up to 6000 cycles per minute), making the process extremely stable. The working head can also be equipped with a drill with up to 4 drill bits. The UNICUT 3C50 automatic cutting machine also features, among others, a workpiece sorting system, a cutting layout editor and a barcode scanner. The total ...

Allgaier Screening Machine | Vibrating screen type ARSM 33-10 Refurbished (workshop overhauled) - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: refurbished - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts freely selectable - Design of the spouts according to customer requirements Screening machine overhauled. Spherical roller bearings and struts are new. Suitable, among other things, for screening the following bulk materials: -Wood chips - Sawdust and sawdust -Biomass -Wood pellets -Charcoal - Reclaimed wood -Bark Vibr ...

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 p ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Very good metal separator / metal separator for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after a NO-ne ate separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approx. 1 mm grain size. Meaningful use for metal contents up to 60% metal content. Unique flap technology (flipper), no compressed air required. The machine is immediately ready for operation, can be inspected and tested. On request also with camera! If the machine is too small, we build it larger. This is our demo machine. Maximum throughput depends on the material and purpose. Price matter of negotiation!

ALUWIL ST 3000 roller blind cutting table built in Poland in 2019 (implemented in production in 2022) offers the best combination of speed and precision in cutting thick materials. The fabrics arranged on a large working area are machined by an under-top mounted cutting blade with forward and reverse feed control via ALLEN-BRADLEY touchscreen HMI panel. Once the cut is complete, the knife automatically returns to its initial setting, followed by the release of the bilateral pneumatic hold-downs that hold the fabric. The ALUWIL ST-3000 fabric cutting table is also distinguished by its highly rigid steel-aluminium construction and extensive equipment, including a feed bar, fabric end detection sensor and measuring stop. The ALUWIL cutting table weighs 380 kg. Technical data of the ALUWIL ST 3000 fabric cutting machine - work area (L x W): 2800 x 2850 mm - circular cutting blade - fab ...

Offer 35801 The machine can be viewed at the location 42579 Heiligenhaus by appointment. Specifications: - Workspace X ; Y ; Z 2520 x 1550 x 300 mm - Laser power 4 kW - max. material thickness ST 40 , VA ; AL 12 ; 9 ; 8 mm - Control FANUC -Transformer -Oscillator -Refrigerator -Suction - Total space requirements approx. 6.0 x 5.0 x 2.5 m - Transport width approx. 2.5 m - Weight machine approx. 7 T - Total weight approx. 10 T

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

Hereby 2 a material stand are offered for sale. The price is per piece. The item is in a used condition but works perfectly. specifications: - Load capacity: 150kg - Platform width: 150mm - Platform depth: 410mm - Height: 520 - 800mm - Tilt capability: 15° , 30° -Roll material: thermoplastic elastomer (TPE)

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Technical data for the pallet racking system : Shelving system: Arestant Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 13,980 mm Number of shelves per row of shelves: 05 pcs. Number of levels plus floor level: 02 pcs. The scope of delivery includes: 6x Pallet rack racks, used Material colour: sendz. galvanized Frame Type: XS 1 Profile dimensions: 80 x 68 x 1.5 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 4,500 mm high 1,200 mm deep 20x Pallet rack crossbeam, used Material color: orange Truss Type: M12051 Box profile: 120 x 50 mm Agraffe: 5 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 2,010 kg, with the same weight. Distributed Load 40x locking pins, used Material colour: sendzimir galvanized To secure the longitudinal mem ...

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

ATMA ATMACE 710/G screen printing machine was manufactured in 2012 in Taiwan by ATMA CHAMP ENT. CORP. The machine is used for precision printing of medium-sized items, i.e. posters, car stickers and advertisements, on both rigid and flexible flat substrates. The sliding vacuum table made of aluminium alloy with high resistance offers a large working area. Quick replacement and positioning of the screen frame, on the other hand, is ensured by a special gripper, equipped with a micro screen adjustment and pneumatic lock. The ATMACE 710/G screen printing machine can also be integrated into production lines to increase productivity. The total weight of the machine is 1290 kg. The offer also includes the AERORTERM ULTRATERM UV 1100/3000 drying tunnel, manufactured in 2009 by the Czech company AEROTERM a.s.. The machine, designed for curing UV inks and varnishes, is equipped with one row of ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

Cut-to-length line Auxmet strip line Unwinding reel for max 4to coil weight Bandwidth 50-1000mm Material thickness 0.5-3mm at 600N/mm2 Line speed 60m/min Number of stripes 1-11 Reel reel up to 4to coil weight with foiling unit without knife with retrofitted photoelectric sensors The offer is aimed exclusively at traders within the meaning of §14 BGB

The scope of delivery includes: 01x Holder for rear wall grille, used Manafacture: Axelent Material color: creamy white Diagonal length: approx. 285 mm Width: approx. 100 mm Protrusion: approx. 150 mm Material thickness: approx. 3.00 mm Slotted hole dimensions: approx. 55 x 8 mm Number of slotted holes: 02 pcs. Weight/ pcs.: approx. 0,54 kg

The scope of delivery includes: 01x Holder for rear wall grille, used Manafacture: Axelent Material color: creamy white Diagonal length: approx. 215 mm Width: approx. 100 mm Protrusion: approx. 95 mm Material thickness: approx. 3.00 mm Slotted hole dimensions: approx. 55 x 8 mm Number of slotted holes: 02 pcs. Weight/ pcs.: approx. 0,37 kg

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished scotch brite type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressure ...

For sale is an aluminium material silo. It was previously used for plastic granules. Can also be used for fodder, grain and other bulk materials. Weight approx. 175kg Diameter 110cm Total height 200cm Volume approx. 1.5 cubic meters All prices are subject to 19% VAT.

Semi-automatic baler horizontal press 400 Plus is suitable for processing the material to an average of 1 ton per hour. The machine is ideal for industrial plants producing high quality material in the relative small amounts. When the disc presses projecting entirely to the door 400 Plus press produces a very compact bales with dimensions and weight comply with the requirements of the mill. Bale can be completely discharged from the chamber after binding, facilitating switching between materials. Vertical binding system makes the machine is easy to use, quick to bind and suitable for setting along the wall. Technical parameters: dimensions/ size of the baler (height x width x depth)2400 mm x 1750 mm x 4630 mm weight of the baler 5000 kg inlet size (height x width) 820 mm x 930 mm weight of a bale 200 – 400 kg bale wiring wire tape or string number of wires 4 bin ...

The IPI models are designed for the mixing and kneading of medium and high viscosity materials. To mix heavy materials, the Battaggion double arm mixers are considered the standard workhorse of the industry. Unlike most companies, we offer a complete line of mixers with either tangential or overlapping agitator action. Each has mixing characteristics that maximize the mixing for specific products. The counter rotating heavy-duty blades are well known for the efficent kneading shearing of material from heavy creams to high viscosity products. The Battaggion sigma blade mixers this is 500 l

Since a new machine has arrived, the machine is in good condition for urgent sale. The machine does not come with a robot, drying unit, material suction unit and tool mounting screws. The machine is in Budapest, we will load it onto the truck with a crane. Please see our other advertisements.

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

For crushing and compaction in open containers set up at various locations. The Mobil-Jumbo is a mobile Rollpacker that will efficiently tear, crush and compact almost any waste and recyclables. This is done with a heavy-duty and specially equipped roller compactor that crushes and compacts large waste materials to their minimum volume in a short period of time, achieving transport savings of 55-60%. Application: The Roll-Packer is particularly suitable for bulky waste and raw materials, i.e. wooden crates, pallets, large cardboard boxes, plant waste and so on. Technical parameters Dimensions approx. (excluding container) Machine width: approx. 2400 mm Machine height: up to max. 6900 mm Machine length: 4600 mm Roller width: approx. 1800 mm Roller diameter: approx. 1200 mm Cabin dimensions (LxWxH): 1250 x 880 x 2100 mm Additional information Wheelbase: approx. 2500 mm ...

Pressure capacity: 8000 kg Maximum cutting area - 200 mm2 for material strength 40 kg / mm2 Horizontal radius 200 mm Clearance between the side walls 160 mm Fixed hub 35 mm Pin hole in the Stossel 38 x 60 mm Adjustability of the Stossels 70 mm Weight of 400 kg of the Presse Operating instructions The machine is located in the new value. State, probably never in use. Control actuator Stober

Material Scissors - Foil Scissors - Table Scissors - Cardboard Scissors - Veneer Scissors Manufacturer Biagosch & Brandau, Hamburg Cutting width: approx. 105 cm Table width: 110 cm Table depth: 60 cm Table height: 84 cm With extendable storage table for clippings

Code: 0090 Brand: BIMATIC - ITALY Model: MASTER 12 - CE Standard Single-sided automatic edge bander with grinding unit for applying edges in wood, veneer, abs, pvc, melamine, roll materials for joinery, furniture, custom furniture, kitchens, bathroom furniture, panels and various - CE Standard Technical data: Edge thickness mm 0,4 - 12 Panel height mm 8/60 Min panel width mm 70 Min panel length mm 60 Glue pot capacity lt 4 Heating time 5 minutes Working speed mt/min 10-15 Automatic upper presser lift Protection booth Telescopic support roller conveyor for supporting large panels Control panel with operating system by microprocessor - Double digital thermostat controller - Emergency light - Operating controls for all the electropneumatic units Entrance fence with electropneumatic movement synchronized with the premilling unit Premilling unit in entry for perfect  ...

TECHNICAL SPECIFICATIONS Manufacturer: BINDER+CO Name: Expansion Shaft Screen Machine Type: KRL/DD 2200x5 Year of manufacture: 2018 Number of screen decks: 2 pcs. Feed capacity: 370 t/h Feed grain size: 0/70 mm Screen length: 5,000 mm Screen width: 2,200 mm Tilt: 18° Swing width circular: 5/6 mm Linear oscillation width: 15 mm Drive Type: IEC 180L4, B3 Drive power: 22 kW Voltage/frequency/speed: 400 V/50 Hz/798 rpm Total weight: 9,500 kg SPECIFIC COMMENT - Low operating hours and wear and tear - Incl. drive, spring blocks and springs - Incl. outlet tray and material chute - Incl. existing screen coverings

Technical data for the compensating plate: Manufacturer: Bito (L) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.14 kg | Pcs.

Technical data for the compensating plate: Manufacturer: Bito (L) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.37 kg | Pcs.

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | Pcs.

Technical data for the compensating plate: Manufacturer: Bito The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 140 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | Pcs.

Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 1.50 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.18 kg | Pcs.

Technical data for the compensating plate: Manufacturer: Bito (M) The scope of delivery includes: 01x compensating plate, used Material color: sendzimir galvanized Total width: approx. 150 mm Total depth: approx. 105 mm Material thickness: approx. 4.00 mm Hole spacing (center - center hole): approx. 120 mm Weight: approx. 0.46 kg | Pcs.

Technical data for the shelf connector: Shelving system: Bito Included in delivery are: 01x Shelf connector, used Material color: sendzimir galvanized Total length: approx. 300 mm Middle-center hole: approx. 260 mm Profile abbreviation: L 50 x 50 mm Material thickness: approx. 2.00 mm Weight/pcs.: approx. 0.437 kg

Specifications: Manufacturer: BITO Pro Version: right 24311 The scope of delivery includes: 01x Holder for push-through protection, used Material color: sendzimir galvanized Total width: approx. 93 mm Total depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (HxW) Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/ pcs.: 0,192 kg

Specifications: Manufacturer: BITO Pro Version: left 24310 The scope of delivery includes: 01x Holder for push-through protection, used Material color: sendzimir galvanized Total width: approx. 93 mm Total depth: approx. 93 mm Opening dimension for profiles: approx. 51 x 46 mm (HxW) Material thickness: approx. 3.00 mm Number of hooks: 2 hooks Grid spacing: approx. 50 mm Weight/ pcs.: 0,189 kg

We offer you a used post protection here manufacturer BITO (PRO). The stand protectors are designed for a Frame profile width of 80 mm. Included in the scope of delivery are: 01x Post protection, used Material color: yellow f. Stand profile width: approx. 80 mm Total height: approx. 715 mm Total width: approx. 90 mm Inner width: approx. 82 mm Total depth: approx. 70 mm Height designion: approx. 40 mm Material thickness: approx. 4 mm Hole grid: approx. 50 mm Hole diameter: approx. 10 mm Weight / pcs.: approx. 4,908 Kg 04x Hexagonal screw: M10 x 40 mm 04x Hexnut: M10 04x Distance piece: f. M10 Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection in accordance with DIN EN 15635 carried out in accordance with the ...