used Hydraulic Shear for sale

Capacity: 3000 x 6 mm

Offer 25105 Specifications: - max. working width 3050 mm - max. cutting capacity - for sheet steel 6.35 mm - 4 mm for stainless steel - 8 mm for aluminium - Adjustable cutting angle - Number of hydraulic hold-downs 14 pcs - Back gauge with positioning control AMADA 10 - 1000 mm - Front angle stop + support arm - Stroke rate 12 - 26 rpm - Pneumatic connection - Drive 400 V / 5.5 kW - Table height approx. 860 mm - Space required including back gauge, without front support arms -ca. W 3800 x H 1950 x D 2300 mm - Weight approx. 6500 kg - with: - E - foot switch - Sheet metal hold-up - Cutting length adjustment - Cut line illumination

Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel Controlled backgauge up to 1000 mm Cutting length limitation Cut edge lighting Light barriers for the rear area Spare blade Weight approx. 9000 kg

sheet width: 3000 mmplate thickness: 12 mmdistance between columns: ? mmtotal power requirement: 22 kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,72,22,3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mmplate thickness: 12 mmdistance between columns: 3100 mm: mmcutting gap adjustment: ja mmconnected load: 22,5# kWweight of the machine ca.: 8,5 tdimensions of the machine ca.: 4,2x 2,0 x 2,25 mHydraulic guillotine shears with- manual back stop- cutting angle adjustment- cutting gap adjustment- side stopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier

Weight 15,000 kg New replacement upper and lower knives Stroke travels automatically by CNC Cutting gap adjustment automatically

sheet width: 3000 mmplate thickness: 16,00 mmdistance between columns: mmtotal power requirement: 30 kWweight of the machine ca.: 16 tdimensions of the machine ca.: 4,20 x 2,30 x 2,35 m• Motorized back stop 1000 mm• Automatic cutting gap adjustment• Automatic cutting gap adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 3,0 mmdistance between columns: 2620 mmtrue cutting angle adjustable: - back stop - adjustable: 850 mmcutting gap adjustment: - mmtotal power requirement: kWweight of the machine ca.: 2,8 tdimensions: 3,2 x 1,8 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Cutting length 3.050mm Maximum cutting thickness 10mm Programmable / automatic cutting angle Programmable / automatic blade spacing Programmable backgauge 1,000mm stroke Very good condition

Useful cutting length 4,000mm Cutting thickness 4/7mm Adjustable blade spacing motorized backgauge with 1,000mm stroke programmer Adjustable cutting angle 250mm recess machine in good general condition visible in operation at our headquarters!

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

sheet width: 3000 mmplate thickness: 16 mmweight of the machine ca.: 15 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mmplate thickness: 4,0 mmdistance between columns: 3150 mm: mmcutting gap adjustment: ja mmconnected load: 7,5 kWweight of the machine ca.: 6,0 tdimensions of the machine ca.: 3,3 x 3,0 x 1,7 mHydraulic guillotine shears with- motorized back stop- cutting length adjustment- cutting gap adjustment- side stop- 4 support bracketsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

sheet width: 4000 mmplate thickness: 6 mmstroke: 165 mmno. of strokes: 10-28 Hub/mintotal power requirement: 11 kWweight: ca. 9000 kgOverall size: 5150x2200x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 6075 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mLight barrierSheet metal holdingLow operating hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Guillotine Shear EHT TSs 4 40 Year of construction 1992 Working length 4000 mm Thickness 4 mm

sheet width: 4000 mmplate thickness: 4 mmdistance between columns: -- mmtotal power requirement: 7,5 kWdown holder: 18 Stückweight of the machine ca.: 9000 kgdimensions of the machine ca.: 4800 x 2200 x 1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 6075 mm Max. sheet thickness: 4 mm steel Controlled backgauge up to 1000 mm Light barrier Sheet metal hold-up Few operating hours Machine is loaded freely

Specifications: Max. sheet width: 2500 mm Max. sheet thickness: 8 mm Weight, approx.: 6400 kg

Max. cutting length: 2040 mm Max. sheet thickness: 4 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Knife sharpened Weight approx. 3000 kg

sheet width: 3040 mmplate thickness: 4,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 4,50 tdimensions of the machine ca.: mControlled back stop up to 1000 mmSide stop and table extensionsCutting length limitationCutting edge lightingSheet metal holdingKnives sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 3040 mm Max. sheet thickness: 4 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Sheet metal hold-up Knife sharpened Weight approx. 4500 kg

Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Motorized backgauge with digital display up to 1000 mm Side stop and table extensions Cutting length limitation Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight: approx. 6500 kg

sheet width: 3000 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 6,50 tdimensions of the machine ca.: mMotorized back stop with digital display up to 1000 mmSide stop and table extensionsCutting length limitationCutting edge lightingHydraulic shear angle adjustmentKnives sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24289 Specifications: - Max. cutting width 3060 mm - Max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjustment screws - Number of hold-downs 15 pcs - Stroke rate 23 to 43 rpm - Front angle stop -Mot. Positioning-controlled back gauge 15 - 850 mm - Cut line illumination - E – Footswitch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel: 0.4 - 4.0 mm CNC control: CYBELEC DNC 10 Adjustable rip fence: 100 mm Electronic cutting depth adjustment Recess: 520 mm Working height: 1030 mm Engine power: 9 kW CE mark Dimensions (length x width x height): approx. 2900 x 2300 x 1750 mm Weight: approx. 5 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Attention: Machine is partially disassembled 1 cylinder removed, eye to piston rod must be welded on (see pictures) Motor backgauge with ELGO control incl. spare blade 8500 kg

Guillotine Shears Impact Shears Manufacturer: Haco Type: TS3016 Year of Make: 1985 Cutting length: 3 m Cutting thickness: 16 mm

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

sheet width: 1500 mmplate thickness: 3 mmweight of the machine ca.: 4 tdimensions of the machine ca.: BxTxH 2000x1500x1800 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2500 mmplate thickness: 5 mmdistance between columns: 2600 mmtotal power requirement: 5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulik shear OMAG CE204 - 2050 x 4-5 mm, Information about technical data are not binding., Machine available subject to prior sale., Cutting lenght: 2050 mm, Cutting thick: 4-5 mm, Throath depth: 200 mm, Backgauge travel: 600 mm, Main motor power: 4 Kw, Approx net weight: 3.100 Kg, Accessories: Manual back gauge

weight of the machine ca.: 16 tsheet width: 3150 mmsheet thickness - max.: 16 mmsheet width - min.: 1,6 mmvoltage: 400 Vrange - high tensile: 3950x2475x2520 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Min./Max. Cutting Angle = 0.5 - 2° Cutting gap control = 0.05 - 0.8 mm Stroke rate = 10 - 45 Adjustable back gauge = 750 - 1000 mm Sheet metal high bracket Oil tank = 150 L Motor power = 7.5 kW, 400 V Machine weight = approx. 10,000 kg

Hydraulic Shear MANURHIN SAGITA 3110 Capacity: 3000 x 10 mm Electrical Back gear gauge travel: 900 mm Throat depth: 330 mm Voltage: 380 V Dimensions (L x W x H): 3900 x 1900 x 1900 mm Weight: approx 10 T

sheet width: 2540 mmplate thickness: 2,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 1,60 tdimensions of the machine ca.: mManual back stop adjustable from the front up to 550 mmPneumatic sheet metal holdingKnives sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2540 mmplate thickness: 3,00 mmdistance between columns: mmtotal power requirement: kWweight of the machine ca.: 2,50 tdimensions of the machine ca.: mRear stop manually adjustable from the front up to 550 mmSide stop and table extensionsSheet metal holdingKnives sharpenedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting length: 3150 mmplate thickness: 4 mmcutting angle: 1,45 °no. of strokes: 35-80 Hub/mincolumn arm: 200 mmNumber of hold downs: 16 Stückrear stop: 5 - 1000 mmtable height: 750 mmtotal power requirement: 7,5 kWweight: 4.200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

sheet width: 2050 mmplate thickness: 6,00 mmdistance between columns: mmtotal power requirement: 11 kWweight of the machine ca.: 4,20 tdimensions of the machine ca.: mDimensions: approx. L 2.70 x W 2.15 (plus support arms) x H 1.70 mEquipment• Automatic cutting angle adjustment• Controlled back stop 1000 mm• Manual cutting gap adjustment• Angle stop• Support armsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mmplate thickness: 4 mmtotal power requirement: 5,5 kWControl: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.