used Roll Bending Machines for sale

Three-Roll Rotary Bending Machine Manufacturer: C.F. Tenge-Rietberg Model No.: GMBF Capacity: 4000 x 6 mm Year of Make: 1972

Offer 24195 Specifications - Max. working width 2050 mm - Max. sheet thickness at 400 N/mm² without bending 4 mm - Roller diameter 115 mm - Drive 400 V / 4.5 kW - Handheld remote control - Space requirement approx. W 2800 x H 1250 x D 1150 mm - Weight approx. 2200 kg

Bending length: 3,050 mm Bending: 8 mm Round bending: 10 mm Upper roller: Ø 240 mm Lower roller: Ø 260 mm Equipped with: - Hydraulic folding bearings - Digital readout on lower rollers -Operating instructions Country of origin: Italy Motor power: 11 kW Machine LxWxH: 480 x 140 x 100 cm Machine weight: 7,400 kg

Assembly method C in C Profile size 89 mm Material thickness 0.8-1.6 mm Roll forming stations 14 Tooling punches 11+1

Specifications: hydr. Four Roll Round Bending Machine Working width: 4000 mm Max. bending power: 10.0 mm Max. bend: 8.0 mm Diameter upper roller: 305 mm Diameter of side lower rollers: 305 mm Diameter middle lower roller: 265 mm Conical bending device by inclined position of the two side rollers Hardened rollers Hydraulic Safety Chucks Lateral bending aid on the right side Mobile control panel Dimensions (length x width x height): approx. 7300 x 1600 x 1600 mm Net weight: approx. 17 tons

Plate roll hydraulic variable axis 3 roll capacity 3100x 130 mm with pre-pinch Brand MG model PH3.1500 year 2016 machine in perfect condition as a new with warranty included top roll size 880 mm side rolls size 800 mm useful width 3100 mm Capacity Plate width mm. 3000 Rolling thickness mm. 130 Pre-bend thickness mm. 100 minimum rolling diameter 1000 mm (see capacity bending chart in enclosed ) electric power 150 Hp run the hydraulic unit variable axis rolls configuration with pre-bending -Rolls all the 3 are driven and synchronized with planetary gear unit and hydraulic motor each roll -Conical plate bending the 3 rolls are tiltable front-back special configuration for cones forming -Digital position readouts of the 3 rolls -friction free technology all movement on bearings -Overload safety hydraulic protection -Centralized ...

Hydraulic plate bending machine 4-roll capacity 2500x18 mm thickness Brand MG model MH2518 Year 2007 Bending capacity with pre-pinch plate width 2500 mm thickness 18 mm pre-bend 14 mm --- Max width on the rolls 2600 mm top roll size 280 mm lower roll 260 mm minimum bending rolling dia. Ø 330mm Power electric 15Hp voltage 380/50 Vac --- Installed configuration Hardened rolls, high surface resistance Driven central rolls rotation hydraulic with gear unit Rolls parallelism lifetime with torsion bar Pre-pinch pressure adjustable for best pre-bend Conical plate rolling hydraulic with contrast pad Drop-end top roll front hydraulic opening unload Re-rolling calibration system for welded shells Digital readout display position of rollers Safety and emergency systems installed Manuals and schematics originals Weight of the machine 7 ton

Hydraulic plate bending machine 4-roll capacity width 3000x20 mm thickness Brand MG model EH320 used machine year 2001 Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 20 mm pre-bend 16 mm minimum rolling ID 420 mm depending on plate thickness and strength. --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm side rolls 250 mm Power electric 15Hp voltage 400/50 Vac --- configuration Hardened surface of the 4 rolls Dual driven central rolls rotation hydraulic motorized with gear unit each roll. Conical plate bend hydraulic attachment for cone bending. Re-rolling device for calibration roundness of welded shells Front open drop-end to unload the closed rolled plates Control console hydraulic commands with digital readout Digital position readout of side rolls Safety and emergency systems installed  ...

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front  ...

Hydraulic plate bending machine 4-roll capacity width 750x20 mm thickness Brand MG model EH0720 CNC year of make 2001 Bending capacity with dual Initial pinch planetary plate width 700 mm plate thickness 20 mm pre-bend 16 mm --- Length on the rolls 750 mm Upper roll 220 mm lower roll 200 mm side rolls 180 mm + 1 extra upper roll smaller size 175 mm interchangeable minimum achievable rolling ID 200 mm Power electric 10Hp voltage 380/50 Vac --- Installed configuration Hardened surface of the 4 rolls Driven rolls rotation hydraulic motorized with gear units Synchronized speed automatic between the rolls Re-rolling device for calibration roundness of welded shells Front open drop-end to unload the closed rolled plates Control console electric commands with CNC and digital readout CNC programmable automatic plate rolling – System WinME ...

Hydraulic Plate Bending machine 3 roll 3000x220 mm planetary pinch pyramid model MG3220 3 roll year of make 2012 Capacity : Plate width mm. 3000 Rolling thickness mm. 220 Pre-bend thickness mm. 180 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty. -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Power installed total 450 Hp voltage Vac 380/50 -Hydraulic reservoir 2500 liters of oil, Hydraulic oil chiller refrigerator, stand alone cooling system in automatic -Centralized console electric movable on wheels wit ...

Three-roll round bending machine Manufacturer: Stölting Model No.: SB Manufacturer number: M 1400 Year of Make: 1992 Effective length 6,000 mm ,max. sheet thickness 6.5 mm Net weight 20 toca. 60 cm of the system is sunk into the ground

10000/30 shipbuilding plate bending machine is used in shipyards for precision machining of sheet metal with a maximum thickness of 30 mm. Shipbuilding/marine sheet metal is ideal for the manufacture of e.g. ship hulls and offshore platforms, due to its high tensile strength and weather resistance. Ship plate bending machine machine performs the machining process using three rollers. A sheet metal is fed between the upper roller and two lower rollers with their own drive. The pressure rollers above the upper roller exert pressure on the sheet, causing it to curve into the desired shape. The offered 10000/30 shipbuilding plate rolling machine, including the motors, weighs a total of 170 tonnes. Technical specifications of the 10000/30 shipyard plate rolling machine - working length: 10 m - maximum sheet metal thickness: 30 mm - minimum sheet metal thickness: 6 mm - number of rol ...