used Tool Holders for sale

tool taper: VDI 20 shaft cross cut: 20 mmtool taper: 20 ratio: 2:1 turning speeds: U/mincoolant: ja / yes Boley tool holder driven d106-02, gear transmission ratio 2:1, for following BOLEY machines:Boley BC 32, Boley BC 42, Boley BE 42good conditions, suitable for cross drilling & milling,radial4 off on stockPrice €200 pieceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Approx. 100 pcs Capto C4 adapter, see photos

tool clamping area: 1 - 32 mmweight: 8 - 12 kgDriven toolholders1: Eppinger, Mod. 6035-3: 270 Euro2: Eppinger, Mod. 6052: 360 Euro3: Eppinger, Mod. 6049-2: 360 Euro4: Wendel, Mod. A 3930: 720 Euro5: Eppinger, Mod. 10809-1-3: 720 EuroMachine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: tool taper: SK50 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Various Tool Holders SK 40 With and without tools to hand in

Tool holder shrink holder SK40 1280 Manufacturer : HAIMER Type : SK 40 Rod diameter : 12 mm Total height : 80 mm Pieces : 6

Tool Holder Shrink Holder SK40 16mm Manufacturer : HAIMER Type : SK 40 Rod diameter : 16 mm Total height : 80 mm Pieces : 8

Tool holder shrink SK40 10mm Manufacturer : Heimer , Garant ,Gühring Type : SK 40 Rod diameter : 10 mm Total height : 80 mm Piece 12

Manufacturer : Heimer , Garant ,Gühring Type : SK 40 Rod diameter : 8 mm Total height : 80 mm Piece 4

Tool holder shrink SK40 6mm Manufacturer : Heimer , Garant ,Gühring Type : SK 40 Rod diameter : 6 mm Total height : 80 mm Piece 11

7 pcs Index VD30 mounts with capto interface, 3 pcs driven by it, mint condition!

diameter: mmCutting (quantity): 0weight: kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HSK 100 267 pieces tool holders from Haimer, Mapal, Hoffmann and Nikken including scrap chucks, Weldon holders, slip-on milling mandrels and collet chuck for use

Various Tool Quick Couplers, PARAT, WDR 4 , WDL4, WD4, WB4 , Price per quantity on request

Approx. 23 Pcs. Preciflex Adapters - Used

diameter: 250 mmtool adaptor: 250 length: 700 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Renishaw OMP40-2 Probe with BT40 Holder Renishaw Manufacturer: Renishaw Type: OMP40-2 Technical description: Renishaw OMP40-2 3D optical probe with BT40 tool holder. Wireless, accurate to μm, ideal for zero point measurement on CNC machining centers with BT spindles.

Powered Tool Holder suitable for Mazak SQT 200 M Manufacturer: RGX- Tools Premium quality Made in Europe radial tool holder, with internal cooling 20 bar VDI 40 for Mazak Condition : new Warranty : 12 months Delivery time approx. 14 days from order Item number:RGX1-40/221-32/2.1-130MZ2 Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Height : 130 mm Max. torque : 50 Nm Compatible with the following machines Mazak ᐳ QT 200 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QT 200 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QT 250 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QT 250 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QTN 200 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QTN 200 M/MS/MY/MSY (STAR) ᐳ LIVE TOOLS ᐳ ANGULAR Mazak ᐳ QTN 250 M/MS/MY/MSY (STAR) ᐳ ALL TYPE ᐳ ALL TYPE Mazak ᐳ QTN 250 ...

axially driven tool holder with BMT 65 for e.g. Doosan Manufacturer: RGX- Tools, Quality Made in Europe Fast delivery, Brand : RGX-Tools Type: RGX2-65/101-32/2(DO) Condition : New Warranty : 6 months Special price only applies to stock goods from 2023 Description: BMT 65 Radial Tool Holder, with Internal Cooling for DOOSAN; Hyundai Wia... Axial version ( straight holder ) Manufacturer: RGX- Tools Item number: RGX2-65/101-32/2(DO) Tool holder: Collet ER 32 Internal cooling : yes ; 20 bar Compatible with the following machines Chevalier ᐳ FBL-300 DOOSAN ᐳ PUMA 2100/2600 M/LM/MS/LMS DOOSAN ᐳ PUMA 2100/2600 Y/LY/SY/LSY DOOSAN ᐳ PUMA 3100 M/LM/LY/XLM/XLY/ULM/ULY DOOSAN ᐳ PUMA MX 2000/2500 DOOSAN ᐳ PUOSAN ma MX 2600 T/ST DOOSAN ᐳ PUMA TT 2000/2500 M/S/Y Focus CNC ᐳ FBL 300MC HAAS ᐳ DS-30Y HAAS ᐳ ST-20/25/30/35 Y HAAS ᐳ ST-20/25/30/35 Y Hyundai � ...

tool clamping area: VDI 60 mmweight: 90 kgtool taper: VDI shaft cross cut: 60 tool taper: - ratio: - turning speeds: - U/min: - coolant: - VDI 60 tool holder / turning steel - holderWeight approx. 90 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool clamping area: - mmShipping weight: 22 kgPacking: ? mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool taper: VDI 40 shaft cross cut: 40 tool taper: - ratio: 1:0 turning speeds: 3000 U/min: - coolant: Innen / außen No. 4342Set of VDI - 40 tool holders with drive, make SAUTERThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool assembly block high quality for ISO 40, OSO 50, HSK 40 + 63 + 80 +100. Tool head can be changed by quick-release fastener. Tool can be swivelled 8x 45°.

Tool holder Weldon BT40 665 Manufacturer : Unknown Type : BT 40 Rod diameter : 6 mm Total height : 65 mm Piece:

Tool holder Weldon BT40 8100 Manufacturer : Unknown Type : BT 40 Rod diameter : 8 mm Insert height : 100 mm Pieces : 31

Tool holder Weldon BT40 10100 Manufacturer : Unknown Type : BT 40 Rod diameter : 10 mm Total height : 100 mm Pieces :18

Tool holder Weldon BT40 1065 Manufacturer : Unknown Type : BT 40 Rod diameter : 10 mm Total height : 65 mm Pieces :21

Tool holder Weldon BT40 6mm Manufacturer : Unknown Type : BT 40 Rod diameter : 6 mm Total height : 100 mm Pieces : 40

Tool holder Weldon BT40 650 Manufacturer : Unknown Type : BT 40 Rod diameter : 6 mm Total height : 50 mm Pieces :11

Tool holder Weldon SK40 32100

Tool holder Weldon SK40 28mm Manufacturer : Unknown Type : SK 40 Rod diameter : 28 mm Total height : 50 mm Pieces : 17

Manufacturer : Unknown Type : SK 40 Rod diameter : 25mm Total height : 50 mm Pieces : 2

Manufacturer : Unknown Type : SK 40 Rod diameter : 20 mm Total height : 50 mm Piece 40

Tool holder Weldon SK40 16mm Manufacturer : Unknown Type : SK 40 Rod diameter: 16 mm Total height : 50 mm Piece 80

Tool holder Weldon SK40 20 mm long Manufacturer : Unknown Type : SK 40 Long Rod diameter : 20 mm Total height : 100 mm

Manufacturer Unknown Type SK 40 Rod diameter 8 mm Total height 50 mm

Manufacturer Unknown Type SK 40 Rod diameter 10 mm Total height 50 mm

Manufacturer :Unknown Type :SK 40 Long Rod diameter r:10 mm Total height:100 mm

Manufacturer : Unknown Type : SK 40 Rod diameter : 12 mm Total height : 50 mm Pieces : 44

Manufacturer : Unknown Type : SK 40 Long Rod diameter : 16 mm Total height : 100 mm Piece 10

Manufacturer: Unknown Type :SK 40 Long Rod diameter: 6 mm Total height: 100 mm

Manufacturer: Unknown Type: SK 40 Rod diameter: 6 mm Total height: 50 mm

Tool quick coupler for drills 'Recording MK4 (with adapter MK5 ) Insets: 8 MK3 pcs, 6 pcs MK2 1 MK1 pc, suitable for drilling machines, boring mills, lathes, ...

different tool holders34 pcs  HSK63       --> 20.- EUR/ pice120 pcs HSK-A-100   --> 20.- EUR/ pice

tool clamping area: 20 - 70 mmweight: 5 - 8 kgPrice is per piece for the smallest, if you are interested please contact us.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: mit 30 SK50 Aufnahmen width: 1.200 mmheight: 2.000 mmweight: 300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.