used Band Saws for sale

ALDURO Metal Band Saw MBS-180SK Section cap. up to 180 mm round 4 belt speeds 22 / 33 / 45 / 65 m/min. Vise opening 260 mm Cooling system Hydr. Lowering Motor power 0.75 kW, 400 V Weight approx. 130 kg 0041 62 922 68 28

cutting diameter: 250 mmdimensions of saw-band: 3505 x 25 x 0,95 mmtable height: 450 mmcutting speed: 10 - 110 m/mintotal power requirement: 3 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 2,0 x 2,2 x 1,4 mFully automatic band saw- including chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw Bauer 450 V -CE marking -Stepless speed regulation -Projection 430mm -Cutting height 230mm -Working height 850mm -Saw motor 1.4 KW -Mint condition -Replacement saw blade -Machine feet Dimensions: Jpyzij8By LxWxH0.7x0.8x1.9 meters / Weight approx. 450Kg

Offer 25114 Technical data approx.: - Roll diameter 500 mm - Projection 500 mm - Max. passage height 400 mm - Table size 630 x 530 mm - Table swivel 10 / 30 ° - Table height from the floor 950 mm - Saw blade length approx. 3900 mm - Saw bandwidth approx. 3 - 25 mm - Cutting speeds ( presumably ) 81 – 145 – 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space requirement approx. W 750 x H 2000 x D 1000 mm

cutting diameter: 300 mmsaw band length: 3900 mmtotal power requirement: 3 kWweight of the machine ca.: 0,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: - mmsaw band length: - mmtable height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23426 Specifications: - Cutting range at 90° around 420 mm - flat 635 x 290 mm - Cutting range 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Stepless cutting speeds 18 to 108 m/min - Hydr. Raising + lowering the saw frame - Hydr. Material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine is mounted on bogie - Feed roller conveyor mot. driven 4000 mm - Discharge roller conveyor with dimension stop 6000 mm - Space requirement approx. W 2500 x H 1400 x D 1100 mm - Weight machine approx. 950 kg - Weight roller conveyors 2000 kg

cutting diameter: 500 mmsaw band length: 5200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1.8 tdimensions of the machine ca.: 2,8 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saw -Bauer S300 -Cutting Capacity/Flat/ 90 Degree - 300mm -Saw blade length 3900x25x0.9mm -Belt speed 20-70m/min -Stepless cutting pressure regulation -Mitre cutting device -Machine rollers Dnxhnj Dimensions: LxWxH 2.3x1.3x1.5 meters /weight 550Kg

cutting diameter: 400 mmsaw band length: 500 mmtable height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 230 mm: 2730 mm: 320 mm: 230 mm: 320x130 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 230 mm: 2730 mm: 320 mm: 230 mm: 320x130x mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 440 mm: 5200 mm: 610 mm: 440 mm: 610x440 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: - mmthroat: - mmworkpiece height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22606 Specifications: - Saw blade dimensions 2765 x 27 x 0.9 mm - 2 cutting speeds 35 - 70 m/min - Cutting pressure regulation - Hydr.- Pneum. Raising + lowering the saw frame - Machine table swivels for mitre cuts - Cutting area - at 90° approx. 255 mm - flat 300 x 180 mm - at 45° Li approx. 210 mm - flat 210 x 160 mm - at 45°Re approx. 180 mm - at 60°Li around 135 mm - max. opening width of vice 365 mm - Drive 400 V / 1.3 / 1.7 kW - Space requirement approx. W 900 x H 1800 x D 1700 mm - Weight approx. 350 kg

Used band saw Bomar Model: STG 320 DGH Year of construction 2000 Cutting speed adjustable via variator 20-90 m/min. Flexible control panel 90° ∅ 320mm ▨ 320x320mm 510x250mm 470x320mm R 45° ∅ 320mm / ▨ 310x210mm / I-beam 360x180mm R 60° ∅ 220mm / ▨ 220x220mm / I-beam 220x240mm L 45° ∅ 320mm / ▨310x310mm / I-beam 360x180mm L 60° ∅ 170mm / ▨170x170mm / I-beam 240x170mm Total drive power : 2.2 kW Drive power coolant pump : 0.09kW Hydraulic power unit : 0.37kW Machine on casters

Inv. Num. : 7179 Type: BS 740 RS3 Producer: FELDER Created: 2021 Parameters: Machine width: 860 mm Machine length: 1100 mm Machine weight: 500 kg Cutting height: 450 mm Saw blade length: 5365 mm Equipment: Automatic workpiece feeding

The machine is in perfect condition.

very well preserved FORTE , at call

cutting diameter: 400 mmcutting speed: 20 - 197 m/mincutting width: 400 mm: 550 mm: 1100 mmsaw band length: mmband speed: 20 - 60 m/mintotal power requirement: 1,6 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,3 x 1,9 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3660 x 27 x 0,9 mmcutting width: 400 mmengine: 1,0 KWmotor speeds:: 1400 U/mincutting speed: 20 - 70 m/minweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,55 x 1,0 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmcutting speed: 10 - 70 m/minband speed: 10 - 70 m/min: 400 mm: mmsaw band length: 3660 x 27 x 0,9 mmtotal power requirement: 3,5 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 2,0 x 1,7 x 1,7 minkl. DokumenmtationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 1600 mmsaw band length: 11000 mmcutting width: 1,6 mmcapacity 90 degrees: square: 1600 X 1600 mmcapacity 90 degrees: flat: 1600 X 2500 mmtotal power requirement: 11 kWweight of the machine ca.: 19 tThe pictures are only for orientation and illustration of the KSY model in adifferent size.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 360 mmsaw band length: 4420 x 34 x 1,1 mmcutting width: 360 mmcutting speed: 15 - 90 m/min: 3,0 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,35 x 2,3 x 1,75 mHydraulic band saw machine with- Material feed 800mm- Motorized saw blade tension- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmdimensions of saw-band: 3660 x 27 x 0,9 mmcutting width: 400 x 260 mmcutting speed: 17 - 106 m/min: 260 mmstroke back stop: 250 mmcross-slide: 400 x 250 total power requirement: 1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,6 x 0,8 x 1,2 mgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25091 Specifications: - Roll diameter 420 mm - Projection 400 mm - Max. passage height 280 mm - Table size 600 x 600 mm - Table can be swivelled in 2 levels ± 45° and ± 15° - Table height from the floor approx. 975 mm - Saw blade length 3200 - 3400 mm - Stepless saw blade speed 10 - 260 m/min - Drive 400 V / 0.9 / 1.7 kW - Weight approx. 500 kg - Space requirement approx. W 750 x H 1950 x D 1150 mm

cutting diameter: 300 mmsaw band length: 4100 x 34 x 1,1 mmcutting width: 300 mmcutting speed: 10 - 130 m/min: kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,5 x 2,0 x 1,75 mHydraulic band saw machine with- Material feed 900mm- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Saw blade dimensions: 2765 x 27 mm Manual operation with 2 speeds Voltage: 380 volts

cutting diameter: 230 mmsaw band length: 2750 x 27 x 0,9 mm: 280 x 150 mmcutting speed: 35/70 m/mintotal power requirement: 1,3/1,7 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: 3,0 x 2,0 x 1,8 mSemi-automatic band saw- Double miter 45°/60°- Roller conveyor with length stop 2000mm- Roller conveyor feed 3000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 250 mmsaw band length: 3100 x 27 x 0,9 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 280 x 190 mmband speed: 37 / 74 m/minsawing motor: 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,3 mMiter band saw- Semi-automatic- Double miter- Material detection during loweringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic, double-sided mitre band saw with turntable Swivel bracket design, mitre angle: 30°-90°-45° Material tension: hydraulic, saw bracket feed: hydraulic, Lifting bracket: hydraulic, speed: 37 / 74 m/min, belt dimensions: 3100 x 27 mm, 45°: round 240, square 240, rectangle 260x220 mm, 30°: round 190, square 180, rectangle 200x100 mm, saw feed infinitely adjustable via fine throttle, hydraulic material tension, opens and closes automatically, quick-release vise, can be used to the right or left of the belt, Ball-bearing turntable with grid and quick clamp for holding the saw frame, Particularly easy swivelling of the bracket, Large doors for easy belt change from the front, Manually stepless adjustment of the mitre angles, Material feed from the left or right possible Lifting bracket hydraulically, Automatic adjustment of the stirrup height according to material diam ...

Machine Type: Vertical Metal Band Saw Machine Manufacturer: JAESPA Model: MSU 5 Year of Make: 1990 Condition: very good Offer type: used machine Specifications: Projection: 500 mm Drive type: el./mech. Table: 615 x 615 mm Swivel Cutting range: Cutting height max. 380 mm Drive: 2.2 kW Remark: Stepless speed control, butt welding equipment, Attack Machine Light Weight: 500 kg The machine is in a very good and immediately ready condition and can be viewed and demonstrated by us. We would be pleased if our offer is of interest to you. Errors, changes and prior sale reserved.

cutting width: max. 500 mmCutting height: max. 260 mmmiter: manuell verstellbar saw band length: 3600 - 3660 mm: 13863 86 Year: ca. 1986 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: - Cutting range at 90° around 360 mm - Square 325 mm - flat 500 x 320 mm - Mitre adjustable left + right 90 to 30 ° - Cutting range at 45° around 360 mm - flat 350 x 320 mm - Material support height approx. 800 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Cutting speed 17 - 110 m/min - hydr. Lifting – lowering the saw frame - Upper stroke limit of the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Saw blade cleaning brush - Coolant device - Total drive power 400 V / 1.8 kW - Space requirement approx. W 2600 x H 2000 x D 2100 mm - Weight approx. 2000 kg

Sawing capacity at 90 degrees: Round: Ø303 mm Square WxH: 360 x 305 mm Sawing capacity at 45 degrees: Round: Ø265 mm Square WxH: 265 x 300 mm Sawing capacity at 30 degrees: Round: Ø175 mm Square WxH: 175 x 300 mm Sawing speed: 20 - 90 m/min. Saw blade: 3830 x 25 x 0.9 mm 3850 x 27 x 0.9 mm Working height: 700 mm Equipped with: - Mitre saws -Semiautomatic - Roller conveyors approx. 8 meters -Operating instructions Country of origin: Germany Motor power: 1.1 kW Machine LxWxH: 2200 x 1250 x 1650 mm Machine weight: 780 kg

cutting diameter: 460 mmsaw band length: 0/ mmtable height: 0/ mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LHS Lagertechnik, supplier of shelving systems and general storage technology. Due to a customer's production closure, we are selling a KASTO HBA 420 band saw. In this ad, you will buy as follows: - 1 piece KASTO band saw HBA 420 - Year of construction: 1990 - Serial number: 17809 - Belt length: 6,300 mm - Band height: 41 mm - Band thickness: 1.3 mm -Conveyor - Connection voltage: 400 volts - Sale in as-is condition without guarantee and warranty - Loading with forklift, shipping and self-collection possible Sale in as-is condition without guarantee and warranty. Loading by forklift, shipping and self-collection possible.

Cutting range: Cutting range 90° round 260 mm Cutting area 90° flat (W x H) 300 x 260 mm Cutting area 90° square 260 x 260 mm Cutting range + 45° around 200 mm Cutting area + 45° flat (W x H) 200 x 240 mm Cutting area + 45° square 200 x 200 mm Cutting range + 60° round 165 mm Cutting area + 60° flat (W x H) 160 x 120 mm Cutting area + 60° square 150 x 150 mm Cutting range - 45° around 200 mm Cutting area - 45° flat (W x H) 200 x 240 mm Cutting area - 45° square 200 x 200 mm Material feed length, single 500 mm Material feed length, multiple feed 9,999 mm Smallest diameter to be sawn 10 mm Shortest section length for single cut and automatic 6 mm Shortest remnant length for single cut 30 mm Shortest offcut length in automatic operation 200 mm

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T

cutting diameter: 260 mmcapacity 90 degrees: square: 260 x 260 mmengine output: 3,5 kWweight of the machine ca.: 1,35 tdimensions of the machine ca.: 2,45 x 0,92 x 1,76 mHigh-performance band saw machine with- CNC control- Chip conveyor- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: 4310 x 27 x 0,9 mmtable height: -- mmcutting speed: 17 m/mintotal power requirement: 3,2 kWweight of the machine ca.: 920 kgdimensions of the machine ca.: 2,5 x 1,7 x 1,5 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: 4310 x 27 x 0,9 mmtable height: -- mmcutting speed: 17 m/mintotal power requirement: 3,2 kWweight of the machine ca.: 920 kgdimensions of the machine ca.: 2,5 x 1,7 x 1,5 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: rund 280 mmsaw band length: 3830 x 25 x 0,90 mmcapacity 90 degrees: round: 280 mmcapacity 60 degrees: square: 280 x 280 mmcapacity 90 degrees: flat: 360 x 180 mmtotal power requirement: 2,2 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: LBH 2,8 x 0,85 x 2,35 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction 509 / Item No.: 33 Description: Metal Band Saw Machine Make: Kasto Type: SBL 400 G Year of Make: 1998 Serial No.: 6423101024 Description: Machine weight 920 kg, cutting width approx. 400 mm, (application only possible by crane) Good day this item is part of an insolvency online auction. The starting price is € 2,500.00 net (plus 18% buyer's premium, plus gross VAT).

chip conveyor: inkl. : inkl. weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23457 Specifications: - Hydr. Lifting - lowering the saw bar - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° round approx. 215 mm - flat approx. 215 x 170 mm - Cutting range at 45° round approx. 130 mm - flat approx. 130 x 190 mm - Lifting speeds + cutting speeds adjustable - Cutting speeds 16 / 32 m/min - Mitre adjuster. Vise with opening width up to 260 mm - E.-Mot. Coolant system - Drive 400 V / 0.85 kW - Space requirement approx. W 500 x H 1250 x D 1200 mm - Weight approx. 160 kg - Roller conveyor 1000 mm

KNUTH VB 510 Metal Band Saw, BJ 2018 Operating voltage:400 V Frequency: 50 Hz Connection: 1.5 kW Table dimensions:600x500 mm Incl. whetstone and sanding belt device Dimensions set-up:1150x700x2000 mm Weight:approx. 400 KG

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

MACC Metal Band Saw Special 280 CSO Section cap. up to 220 mm round Speeds 32/66 m/min. Coolant pump Attack Motor 2-stage 400 V incl. machine base Weight approx. 230 kg

cutting diameter: 250 mmdimensions of saw-band: 2825 x 27 x 0,9 mmcutting speed: 35 / 70 m/mintotal power requirement: kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,6 x 0,8 x 1,5 mBand saw- Miter cuts up to 60° left- Vice with quick-clamping device- Electric automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.