saws used for sale

Article number: 19-03-036 Manufacturer: Pehaka Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1976 L x W x H: approx. 1400x800x1900mm Weight: approx. 650kg Saw blade length: approx. 4400-4500mm Saw band width: approx. 6-35mm Max. installation height: approx. 300mm Projection: approx. 600mm Drive power: approx. 3.0kW Accessories  2 pieces of bandsaw blades Other accessories on request Price and other technical data on request

Article number: 19-03-027 Manufacturer: Mep Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1991 L x W x H: ca.700x900x1100mm Weight: approx. 150kg Saw blade dimensions: approx. 400x3,6x40mm Saw blade speed: approx. 2800 rpm Accessories  Pneumatic clamping  Saw blade  Miter-adjustable back stop Other accessories on request Price and other technical data on request

Key data: 420 mm, 650 mm

Article number: 19-03-028 Manufacturer: Kasto Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1980 L x W x H: approx. 1300x800x1400mm Weight: approx. 1000kg Saw blade dimensions: approx. 650x55x2.5mm Cutting range: 90 degrees Round: approx. Ø420mm Square: approx. 300x300mm Flat: approx. 420x420mm Cutting range: 45 degrees Round: approx. Ø320mm Square: approx. 260x260mm Flat: approx. 320x260mm Mitre cut: approx. 0-45 degrees Accessories  Cutting pressure adjustable  Adjustable number of strokes  Coolant device  Footswitch  Turntable Other accessories on request Price and other technical data on request

Key data: 200 mm, 450 mm

Article code: 19-03-035 Manufacturer: Kasto Very good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1975 L x W x H: approx. 1600x800x1300mm Weight: approx. 500kg Saw blade dimensions: approx. 450mm Cutting diameter: approx. 200mm Accessories  Cutting pressure adjustable  Coolant device  9 pieces of saw blades Other accessories on request Price and other technical data on request

Automatic band saw Bauer S260 Year of construction: 1995 Manufacturer: Bauer Germany S/N 69-1120 with additional runway Specifications Cutting diameter 260 mm Saw blade length 3660 x 25x 0.9 mm Cutting width 320 x 240 mm Motor 0.75 kW Cutting range at 90° round 260 mm flat 450 x 240 mm Cutting range at 45° round 230 mm flat 240 x 200 mm Hydr. raising + lowering the saw frame Conventional governance Cutting pressure infinitely variable 0 - 10 m/min Total drive power 400 V / 0.8 kW Coolant device Dimensions: 2010 x 850 x 1110 mm Weight approx. 800 kg

saw blade diameter: 800 x 800 x 1500 mmcutting diameter: 200 mmstroke: 150 mmdimensions of the machine ca.: mtotal power requirement: 3 kWweight of the machine ca.: tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 500 mmsaw band length: 5200 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1.8 tdimensions of the machine ca.: 2,8 x 1,4 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible.

Saw blade diameter: 450mm, stroke: 240mm, machine dimensions X/Y/Z: approx. 1000mm/1350mm/1900mm, weight: approx. 1200kg. Cutting range at 90°: round material: 150mm, flat material: 300mm/95mm, square material: 140mm/140mm. Cutting range at 45°: flat material: 210mm/95mm. Including roller conveyor and NC stopper. On-site inspection is possible.

Key data: 350 mm

Used Metal Circular Saw Int. Art. Ref. m3656 Manufacturer Metallkraft Type MKS 350 Year of construction approx. 2004 Motor power 1.4/2.4 kW Speeds 40/80 rpm. Vise span 120 mm Saw blade diameter 350 mm Weight approx. 210 kg Cutting performance: - Tube 90° 90 mm - Tube 45° 80 mm - Round, full 90° 65 mm - Round, full 45° 60 mm - Square 90° 85x85 mm - Square 45° 70x70 mm - Rectangle 90° 120x70 mm - Rectangle 45° 80x70 mm Accessories: - various tools and keys -Coolant pump -Saw blades -Oil -Guide Item location: 59425 Unna The machine can be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimension ...

dimensions of saw-band: 2720x27x0,9 mmcapacity 90 degrees: round: 230 mmcapacity 90 degrees: flat: 300x150 mmcapacity 45 degrees: round: 180 mmcapacity 60 degrees: flat: 200x180 mm: 110 mm: 120x80 mmweight of the machine ca.: 250 kgdimensions of the machine ca.: 1500x900x1250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connected load: 7.2kW, operating pressure: 7bar, saw blade diameter: 500mm, speed: 2800rpm, min. cutting length: 370mm, angular tilt: 45°-90°, machine weight: approx. 800kg. An on-site inspection is possible.

MEP Shark 282 CCS band saw. 3-speed 400V, 2-speed motor runs smoothly. Continuously adjustable speeds from 0 to 72 RPM. Miter sawing possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum sawing capacity, round: 250 mm Maximum sawing capacity, square: 220 mm Maximum clamp opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125x70x190cm Feed track dimensions: 200x53x90cm Includes accessories as shown in the pictures. Freight delivery throughout Europe possible!

Lg.Nr. 24534 Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vise 185 mm - Cutting range with saw blade diameter 350 mm - at 90° about 100 mm flat up to 170 x 90 mm - at 45° around 95 mm flat 125 x 90 mm - Mitre adjustable - Left up to 60° / Right up to 45° - 2 saw blade speeds 36 / 72 1/min - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 700 x H 1700 x D 800 mm - Weight approx. 450 kg

Key data: 320 mm, 4335 mm

Used band saw Bomar Model: STG 320 DGH Year of construction 2000 Cutting speed adjustable via variator 20-90 m/min. Flexible control panel 90° ∅ 320mm ▨ 320x320mm 510x250mm 470x320mm R 45° ∅ 320mm / ▨ 310x210mm / I-beam 360x180mm R 60° ∅ 220mm / ▨ 220x220mm / I-beam 220x240mm L 45° ∅ 320mm / ▨310x310mm / I-beam 360x180mm L 60° ∅ 170mm / ▨170x170mm / I-beam 240x170mm Total drive power : 2.2 kW Drive power coolant pump : 0.09kW Hydraulic power unit : 0.37kW Machine on casters

Offer 25110 Specifications: - Saw blade dimensions 2950 x 27.0 x 0.9 mm - Cutting speeds infinitely variable N 36 to 72 m/min - Max. clamping possibility 325 mm - Mitre adjustable up to 60 ° - Cutting range at 90° around 250 mm - Square 220 mm - flat 280 x 200 mm - Cutting range at 45° around 230 mm - flat 180 x 110 mm - Pneumatic connection 6 bar - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Chip clearing brush - Feed roller conveyor 4000 mm - Discharge roller conveyor with dimension stop 4000 mm - Weight approx. 450 kg - Space requirement approx. W 1400 x H 1650 x D 1350 mm

Offer 25108 Specifications: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° around 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° around 110 mm - flat 135 x 60 mm - Mitre adjustable left + right 45 ° - Tiltable mitre adjustment of the saw head for slather cuts on the left - Pneumatic vises - Discharge – roller conveyor with 2000 mm - Roller conveyor feed 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

roll diameter: - mmthroat: - mmworkpiece height: - mmtotal power requirement: - kWweight of the machine ca.: - tdimensions of the machine ca.: - mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr.- Two-Column Miter - Metal Band Saw Machine Specifications: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Mitre adjustment by handwheel - Saw blade dimensions 5400 x 38 x 1.3 mm - Incisional speed. infinitely variable 19 - 130 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min -one. Material clamping - Preselection of the lifting height of the saw blade - Micro spray coolant device - Total drive power 400 V / 8 kW - Space requirement approx. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Feed + discharge roller conveyors each approx. 6000 / 8000 mm

Offer 25114 Technical data approx.: - Roll diameter 500 mm - Projection 500 mm - Max. passage height 400 mm - Table size 630 x 530 mm - Table swivel 10 / 30 ° - Table height from the floor 950 mm - Saw blade length approx. 3900 mm - Saw bandwidth approx. 3 - 25 mm - Cutting speeds ( presumably ) 81 – 145 – 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space requirement approx. W 750 x H 2000 x D 1000 mm