used FLOTT for sale

Sanding belt dimensions 150x2250 mm Grinding table dimensions 525 x 160 mm (without plate, the plate you can see in the photos was glued on) Table dimensions on pulley 320 x 280 mm Suction nozzle Ø 100 mm Motor power 1.1 kW Connected loads 400 V, 50 Hz, 3~, 2.5 A Dimensions: 1,400 x 400 x 1150 mm

Double bench grinder, double grinder 400 volt connection

Spindle mount MK 3 Drilling capacity in steel: 30.0 mm Coolant pump

Specifications: - Sanding belt dimensions 2000 x 150 mm - Surface grinding opening 530 x 150 mm - Sanding belt speed 34 m/s - Contact washer B 150 / D 200 - Drive pulley B 150 / D 200 - Drive 400 V / 2880 rpm / 4 kW - Working height adjustable 475 - 1240 mm - Space requirement approx. W 580 x H approx. 1250 x D 1000 mm - Weight approx. 110 kg

Specifications: Lens dimensions: 175 x 25 x 32 mm Motor power: 0.6 kW Dimensions (WxDxH), approx.: 410 x 300 x 260 mm Weight, approx.: 16 kg

Drilling capacity steel/GG: 15 mm Spindle holder: 1 MK Projection: 300 mm Table size: 210 x 300 mm Quill stroke: 110 mm Spindle speeds: 200 - 3000 rpm Drive motor: 380 V, 1.1 kW Space requirement: 850 x 420 x 1860 mm Weight: 220 kg

Motor three-phase current 400V with frequency converter (kW) 3 Saw blade dimension (mm) 5200 x 34 x 1.1 Flywheels Ø (mm) 480 Cutting speed (m/min) 20 – 120 Wingspan (mm) 610 Working height (mm) 780 Machine dimension without packaging (mm) 2780 x 1440 x 1560 Weight (kg) 800 Standard equipment Ergonomically redesigned, robust welded frame construction for mitre cuts from 0° to 60° right/left Stable, low-vibration frame construction with arm joint mounted in plain bearings Clear control panel to the operator side Simple, easy-to-understand controls Precisely ground carbide saw blade guides (adjustable) for the highest demands on cutting accuracy Synchronously driven chip removal brush Semi-automatic sawing cycle: fully hydraulic Cutting feed hydraulically incl. automatic cutting pressure regulation Mitre adjustment and clamping (manual) Hydraulic Full Stroke Cylind ...

Standard equipment: With swivel head (left/right) for mitre cuts, two speeds, Stable cast construction of the machine housing, Oil bath reduction gears, consisting of bronze wheel and hardened, ground steel screw. Quick-release vise with Counterclamping device for double workpiece clamping. Long-lasting, mechanical coolant pump Adjustable length stop Operating tool Machine colour: RAL 7037 Specifications KS 315 M Motor three-phase current 400 V, Pole switchable (kW) 1.3/1.9 Vise Span(mm) 110 Cooling tank capacity (l) 5 Working height with base frame (mm) 980 2 speeds (rpm) 41/82 Machine Dimension with base frame (mm) 1,000 x 1,100 x 1,800 Machine Dimension 12-month warranty for single-shift operation Not included: Saw blade (mm) Ø 315 x 32 Steel base frame

The machine is in perfect condition.

Spindle mount MK 3 Drilling capacity in steel: 23 mm

- Flow forming machine FLOTT SB 20 FB plus - Tapping device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop - Stepless speed control via central rotary knob - EMERGENCY STOP push button - Thermal overload protection - Spindle stop - Drill protection with electr. Hedge - Connection cable with CEE plug Flow molds for the production of threads in thin-walled metallic materials, Flow forming capacity at 3 mm sheet thickness 8 mm - Spindle: MK II - Drilling depth (mm): 100 - Projection (mm): 240 - Column diameter: 82 mm - Usable work surface (W x L) (mm): 340 x 280 - Table height adjustment with rack and pinion - Spindle speeds infinitely variable (1/min): 20 – 4,000 - Dimensions (mm): 355 x 705 x 1825 For more TECHNICAL DATA, please refer to the product sheet! 3-year warranty for single-shift operation Deliv ...

Bench drill Speeds 400 - 4800 rpm Height adjustable 15 cm Röhm Supra 1/32 - 1/2 Weight 35 kg 380 V 16 A

Column Drill Speed 200- 3000 rpm 380 V 16 A Height adjustable 55 cm Expellers Drill chuck Albrecht 3 - 16 mm

Brush diameter: approx. 250mm Brush width: approx. 60mm Speed: approx. 2800/1400 rpm L x W x H: approx. 500x560x1250mm Weight: approx. 85kg Accessories  Complete documentation

bore capacity in steel (diameter): 23 mm throat: 295 mm bore stroke: 150 mm taper MK: 3 MK table-size: 450 mm feeds: mm/U turning speeds: 200 - 2000 U/min total power requirement: 1,5 KW weight of the machine ca.: 0,3 t dimensions: 1,2 x 0,6 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drill FLOTT TB 10 -used bench drill, incl. base cabinet, drill head swivelling ---------- Technical data ---------- Number of speeds: 5, Speed range: 480/730/1160/1800/2800, Drill chuck: 1-13, Dimensions (LxWxH): 500x6001400

Table, Drilling and Tapping Machine FLOTT Type TBZ 15 GLFabr. No. 32177027 year of construction 1986Drilling capacity 15 mmSpindle mount MK2Throat depth 195 mmPine stroke 80 mmTable size 275 x 200 mmColumn diameter 70 mmSpindle speed 80 - 4500 rpm. 18 stepsMotor power 0.55 + 0.75 kWNet connection 380 volts, 50 Hz- 6 belt steps from the motor and 2 belt stages to the drilling spindle 2 motor speeds- 3 pieces guide cartridges 0.7mm + 0.8mm and 28G available- Drill head height adjustment via crank with rack on the

bore capacity in steel (diameter): 23 mm throat: 235 mm bore stroke: 100 mm taper MK: 2 MK table-size: 340 x 280 mm feeds: mm/U turning speeds: 125 - 2250 U/min total power requirement: 0,8 KW weight of the machine ca.: 0,25 t dimensions: 0,8 x 0,6 x 1,85 m Stepless speed Digital speed display Digital depth display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle cone: MK 1 turning speeds: 200 - 3000 U/min table-size: 300 x 220 mm total power requirement: 520 W weight of the machine ca.: 200 kg dimensions of the machine ca.: 8004001800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table, drilling and tapping machine FLOTT Type TBZ 15 GL Colour No. 32177027 year of construction 1986 Drilling capacity 15 mm Spindle holder MK2 Projection 195 mm Pine stroke 80 mm Table size 275 x 200 mm Column diameter 70 mm Spindle speed 80 - 4500 rpm 18 stages Motor power 0.55 + 0.75 kW Mains connection 380 volts, 50 Hz - 6 belt stages from the motor and 2 belt stages to the drilling spindle 2 motor speeds - 3 guide cartridges 0.7mm + 0.8mm and 28G available - Drill head height adjustment via crank with rack on the column - Original metal substructure Space requirement L x W x H 700 x 350 x 1850 mm Weight approx. 150 kg Good condition; used

Bench drill, incl. base cabinet, swivelling drill head ---------- Technical data ---------- Number of speeds: 5, Speed range: 480/730/1160/1800/2800, Drill chuck: 1-13, Dimensions (LxWxH): 500x6001400 Sold as is, without technical inspection