used GRAULE for sale

Graule Pull saw Cutting length 130mm Cutting width 400mm Saw blade diameter 350mm Swivels horizontally, left right 45° vertical 45° Suction nozzle diameter 80mm Motor 2kW 400V 50Hz G&-5179-o3185

Year: 2020 - technically efficient, ready to work – after full service - working length: 3000 mm - roller width: 300 mm - roller diameter: 40 mm - scale for reading the measurement - manually adjustable stop + locking lever

Offer 25035 Specifications: - Saw blade dimensions 350 x 3.5 x 40 mm - Cutting area at 90° W 430 x H 135 mm - at 45° W 300 x H 135 mm - Working height 900 mm - Saw blade speed 3800 rpm - Drive 400 V / 2 kW - Space requirement approx. W 700 x H 1400 x D 1600 mm - Weight approx. 180 kg -with: -Saw blade - Original machine stand - Roller conveyor 6000 mm

Year: 2011 - technically efficient, ready to work – after full service - cutting height: 200 mm - disc diameter: 520 mm - hydraulic feed brake - required lubrication system - tilt angle adjustment crank - bilateral pneumatic clamps - air preparation station

Graule Type: AGT Table Saw -AC brake motor 220 volts 1.6 kW, 2800 rpm -Saw blade diameter 300 mm -Saw blade mounts ( bore ) 40 mm -Table saw table 500x400 mm -Suction nozzle diameter 75 mm -Machine without base and without trolley Dimensions: LxWxH 0.9x0.6x0.4 / Weight 50Kg

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg

Year: 2012 - technically efficient, ready to work – after full service - motor: 2 kW - disc diameter: 350 mm - cutting height: 135 mm - cutting length: 430 mm - tilting cut (left) - base

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling and lubrication system - hydraulic feed brake - pneumatic profile clamps - tilt angle adjustment crank

GRAULE Cut-to-length and mitre saw ZS 135 Description / Technical data: Workshop checked Pneumatic hoses renewed. Motor 2 kW Saw blade diameter 250mm Cutting height 135mm pneum. Material Tension Machine stand Roller conveyor left and right, 3000mm each Stop Slide Shipping can be organized Loading by forklift possible.

Max. saw blade diameter: 520 mm Cutting height: 200 mm at 90°, 140 mm at 45° Cutting length: 420 mm Mitre range horizontal: 45°-90°-25° Mitre range vertical: 60°-90°-30°

Milling cutter diameter 300 mm Milling width: 375 mm Milling depth: 105 mm Pneumatic material tensioners Manual feed Weight: approx. 230 kg

Blade diameter 350 mm Cutting range: cross-section 90° = 430 mm / cutting height at 90° = 135 mm / mitre cut 45° = 300 mm Suction nozzle diameter 100 mm Motor 2 kW, 400 V Weight approx. 100 kg

- technically efficient, ready to work - after full service - motor: 2 kW - cutter diameter: 200 mm - milling width: 350 mm - maximum milling height: 80 mm - pneumatic profile mounting

Year: 2005 - technically efficient, ready to work - after full service - pneumatic profile clamping - manual feed - cooling device

Year: 2017 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - two-sided pneumatic pressure - adjustable crank - hydraulic feed brake

Specifications: - Saw blade dimensions 420 x 3.5 x 40 mm - Horizontal mitre adjustment 45° - 90° - 20° - Vertical mitre adjustment 60° 90° - 45° - Cutting area - at 90° W 450 x H 170 mm - at 45° W 310 x H 135 mm - inclined at 45° H 115 mm - Working height 900 mm - Saw blade speed 3500 rpm - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 1400 x D 1600 mm - Weight approx. 180 kg -with: - hydr. Feed brake -Saw blade - pneum. Workpiece clamping - Saw blade spraying device -Org. Machine stand - Discharge roller conveyor with dimension stop 3000 mm

Pull saw GRAULE ZS 200 N -used-automatic brake, feed brake, machine can be tilted on both sides via hand crank at the rear, pneumatic spraying device---------- Technical data ----------cutting height: 200 mm, cutting length: 400 mm, motor: 3 kWQuality info: - Guides checked / adjusted- complete basic inspection- complete basic cleaning- electrics checked- immediately ready for use

Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes from the front; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:

cutting height at 90°: 170 mm; cutting length: 410 mm; miter vertikal: -60° bis +60°; sawblade diameter: 420 mm; speed: 2800U/min; motor power: 2,2 kW; motor brake: yes; suction connection: 100mm; machine length: 1,20 m; machine width: 0,7 m; Maschinenhöhe: 1,50 m; waight: 110kg;

Cutting height at 90Â: 170 mm; Cutting length: 410 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: -60Â to +60Â; Digital Display: Miter Vertical and Horizontal; Roller conveyor / support table: no; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Feed Brake: Yes; Extraction connection: 100 mm; Machine length: 1.20 m; Machine width: 0.70 m; Machine height: 1.50 m; Weight: 110kg;

Cutting height at 90Â: 215 mm; Cutting length: 410 mm; Saw blade swivel : yes; Saw blade tiltable: no; Roller conveyor / support table: no; Saw blade diameter: 550 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Hold-down: pneumatic; Spraying device: Yes, minimum lubrication system; Feed Brake: Yes, Hydraulic; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:

cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

milling depth: 80 mm milling width: 305 mm saw-blade dia.: 250 mm boring diameter: 40 mm height of profile: 150 mm spindle speed:: ca. 4500 Upm weight of the machine ca.: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.