used WMW for sale

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Inv. Num. : 8057 Type: PYE 160 Producer: WMW Generated: Parameters: Compressive force: 160 t Total power requirement: 7.5 kW Ram stroke: 500 mm Machine weight: 6000 kg

MAX DIAM 250 X 2000

MAX CAPASITY 63 T, DIAMETER ROLLING 110

Sell a used cylindrical grinding machine from WMW model SU 125x200. The machine ran until it was dismantled in production. The dimensions of the machine are LxWxH 1300mm x 2100mm x 1400mm. The weight is 2500kg. Incl. coolant device and operating instructions. As shown in the photos. If you have any further questions, please contact us. The machine can be viewed by prior appointment. On-site loading is no problem and free of charge. The sale is without guarantee and warranty. The return is excluded. All information without guarantee.

Approx. 1750 mm long Eccentric approx. 290 mm Comes from 160 to Presse

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

I am offering Thread rolling machine WMW UPW 12,5.1 after full overhaul. Machine has new hydraulic pump. All electrical motors were recycled. New electrical system was installed on machine. The chain and oil in the variator were changed. The condition of machine is absolutely perfect. Technical data: - Minimum / maximum diameter of the rolled detail: 3/100 mm; - Maximum rolled thread pitch: 4 mm; - Maximum rolled pitch with notched teeth: 1.6 mm; - Maximum rolled length of the thread made by the plunge method: 125 mm; - Maximum rolled length of the thread made longitudinally: 2000 mm; - Minimum / maximum distance of rolling spindles, including stroke: 130/240 mm; - Height of rolling spindles above the machine bed: 160 mm; - Maximum diameter of rolling tools: 195 mm; - Diameter of rolling spindles: 63 mm; - Rolling force infinitely adjustable: from 0 to 12500 kg; - Rolling sp ...

I am offering Thread rolling machine WMW UPW 25 x 100 after full overhaul. New electrical system with Schneider electric components was installed(full documentation and schematics). Machine has a new hydraulic pump, valves and distributor. All electrical motors were electrical checked and all bearings were changed. All bearings of the clutch were changed. Bj77Rbchcjg The chain and oil in the variator were changed. The condition of the machine is absolutely perfect. Model: UPW 25.1 Pressure:25 t Workpiece diameter min/max:10/100 mm

Cylindrical grinding machine WMW SA5x630 incl. plenty of accessories -Tip width 630mm -Tip height 140mm -Measuring equipment -Grinding wheel puller device -Coolant device -Work light -Extensive range of grinding wheels and grinding wheel flanges Hxgasfso -Documentation Dimensions: LxWxH 3x2x2 meters / Weight 4000Kg

MAX DIAM 200

MAX DIAM 250 MAX LENGHT 800

ROLL DIAMETER 70

Bevel gear generator ZFTKK 500/3V

Inv. Num. : 7595 Type: UPW 12.5x70 Producer: WMW Created: 1964 Parameters: Power consumption: 5 kW Max. thread diameter: 70 mm Maximum power: 12.5 t Machine weight: 1900 kg

Sheet thickness max. 2 mm Largest belt width 250 mm Coil Outer Diameter 1200 mm Coil inner diameter 430 -550 mm Max. coil weight 2 x 1600 kg

Thread milling machine GFL400-2000 with change gears

HBM BF80

MAX CAPASITY 25 TONS

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 3500 mm plate depth: 2000 mm plate height: 350 mm groove width: 35 mm groove width: 60 mm flute distance: 250 mm no. of flutes: 8 Stk total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: m Slot center distance: 250 mm Top slot spacing: 35 mm Bottom slot spacing: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

arm length: 300... 1600 mm bore radius max./min: 1800 mm bore capacity in steel (diameter): 56 mm threading: max. 65 mm bore depth: 400 mm tool taper: MK 5 base plate: 1700 x 1000 mm turning speed range - drilling: 14...1800 U/min feed: 0,0315...1,6 m/min total power requirement: 4,5 kW weight of the machine ca.: 7,13 t dimensions of the machine ca.: m - distance Spindle head to base: max. 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t plate thickness: 3,2 mm table-size: 800 x 580 mm ram stroke range: 8...120 mm no. of strokes: 56/90 Hub/min ram adjustment: 70 mm total power requirement: 6 kW weight of the machine ca.: 5,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 250 t throat: 400 mm stroke: 30...140 mm table-size: 1000 x 750 mm hole in the table: 360 x 400 mm ram surface: 630 x 500 mm ram adjustment: 110 mm total power requirement: 18 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 4 Stk bore capacity in steel (diameter): 25 mm spindle distance: 475 mm table-size: 450 x 1900 mm morse taper: MK 4 total power requirement: 10,2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. load: - kg : - weight: - kg 10 off used machine shoes. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: für Stangen und ... : für dickwandige Rohre working area: 30 - 80 mm Ø main drive: 38 kW : Ein- und Auslauf total wight: 12 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1600 mm : ja weight of the machine ca.: 13,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WMW Union BFT 80/2 X: 1000 - Y: 1000 - Z: 1600mm Spindle Dia: 80 mm Spindle bore: ISO 50 Table dimensions : 1100 x 1000 mm Table longitudinal travel (X-axis): 1000 mm Cross travel Table/colom (Y-axis): 1000 mm Height travel head (Z-axis): 1600 mm Max travel spindle: 700 mm Power on spindle: 1250 rpm Power principal motor: 8,5 kW Weight: 11 ton

Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 850mm/280mm/355mm, table dimensions X/Y: 1250mm/315mm, feed X/Y: 800mm/min, feed Z: 250mm/min, spindle mount: ISO 50, spindle speed: 1400rpm. Machine dimensions X/Y/Z: approx. 2000mm/2000mm/2400mm, weight: approx. 3300kg. On-site inspection is possible.

Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible.

Table size X/Y: 630mm/345mm, table clamping surface X/Y: 700mm/300mm, travel X/Y/Z: 400mm/250mm/300mm, spindle mount: SK40, speed: 2240rpm, feed X/Y/Z: 1250mm/min, distance spindle-table: 400mm, quill stroke: 80mm, drive power: 5.5kW. Dimensions X/Y/Z: approx. 2300mm/2650mm/2300mm, weight: approx. 1700kg. On-site inspection is possible.

Pressing force: 10MP, stroke rate: 120/min, ram stroke adjustment: 5mm-55mm, bar length: 40mm, weight: approx. 1200kg.

Pressing force: 630kN, speed up/down: 63/380mm/s, ram stroke: 500mm, throat depth: 360mm, max. table-ram distance: 800mm, ejector force/deep drawing force: 250kN, max. drawing depth: 200mm, ejector stroke: 140mm, weight: approx. 4000kg.

Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.

Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.

Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.

thread rolling machine Type: UPW 25.1 Manufacturer: WMW Year: 1987 Diameter range: 10-100 mm Forging power: 25 t Thread length plunge method: 180 mm Max. pitch: 8 mm Roller dia.: 230 mm Speed: 20-90 rpm Fully functional Find more here - / Contact us at -

total power requirement:12 kW weight of the machine ca.:4,6 t

grinding length:1000 mm grinding width:250 mm workpiece height:400 mm total power requirement:12 kW weight of the machine ca.:3,8 t dimensions of the machine ca.:3.300 x 1.800 x 2.300 mm hydraulic power unit:400 x1000 x 1500 mm control cabinet:2 Stück, 1000 x 1400 x 1500 mm

pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden

x-travel:850 mm y-travel:280 mm z-travel:355 mm total power requirement:8 kW weight of the machine ca.:4 t dimensions of the machine ca.:2 x 2 x2.40 m revolutions per minute: 28-1.400 U/min table-size:1.200 x 370 mm surface area:1.060 x 260 mm spindle taper:SK 50

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:80 mm total power requirement:1,1 kW weight of the machine ca.:195 kg dimensions of the machine ca.:530 x 650 x 1850 mm spindle speeds::355, 710, 1400, 2800 U/min Table dimensions:340 x 280 mm

bore capacity in steel (diameter):10 mm throat:210 mm bore stroke:100 mm total power requirement:0,7 kW weight of the machine ca.:302 kg dimensions of the machine ca.: 620 x 800 x 1950 mm Table dimensions:350 x 250 mm spindle speeds::250, 355, 710, 1000, 1400, 2000, 2500 U/min

Rotary table WMW type D 315 kFabr, No: 28809Table diameter: 315 mm Table height: approx. 135 mm Gear ratio 90 : 1 - Crank with perforated disc and shears - Scale ring for reading on the crank- Readable degree scaling on the rotary table- Swing-out screw for direct pitch- Clamping via clamping lever- 14 mm T-slots in the table top- Shaft drive- Built-in dividing disc 17-25-30-39-47-57Weight: 85 kggood condition; used