used DARLEY for sale

Printing capacity: 300 ton Bending length: 4,300 mm Stand width: 3,700 mm Back gauge: 550 mm Stroke length: 300 mm Projection: 450 mm Feed speed: 120 mm/sec. Working speed: 10 mm/sec. Retraction speed: 120 mm/sec. Control: Delem DA65 Equipped with: - Y1, Y2, X&R - Axis Controlled - CNC hydraulic crowning - Various sets of bending tools - Safety light cabinet Lazer Safe - Operating instructions and machine documents Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21,500 kg

Printing capacity: 110 ton Bending length: 3,100 mm Stand width: 2,550 mm Back gauge: 1,500 mm Stroke length: 150 mm Projection: 250 mm Feed speed: 100 mm/sec. Working speed: 8 mm/sec. Retraction speed: 65 mm/sec. Control: ESA Kvara S630 Touch Equipped with: - Foot pedal - Various tool sets - Light curtain safety Merlino - Controls renewed in 2018 Country of origin: Netherlands Motor power: 7.5 kW Machine LxWxH: 320 x 160 x 244 cm Machine weight: 8,700 kg

Printing capacity: 50 ton Bending length: 2,050 mm Stand width: 1,500 mm Back gauge: 750 mm Projection: 250 mm Stroke length: 120 mm Control: Delem DA24E Equipped with: - Various bending tools - Hand/foot control - Machine operating instructions - Manuele Crowning Country of origin: Netherlands Motor power: 5.5 kW Machine LxWxH: 2250 x 1100 x 2050 mm Machine weight: 2900 kg

Working length: 4,100 mm Cutting capacity: 13 mm Back gauge: 1,000 mm Director: Darley Delem Equipped with: - Trailer arms 4000 mm long - Foot pedal - Material discharge roller conveyor - Extra set of knives -Documentation Country of origin: Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18,400 kg

Working length: 3,100 mm Cutting capacity: 10 mm Back gauge: 1,000 mm Director: Darley Delem Equipped with: - Trailer arms 3000 mm long - Foot pedal - Material discharge roller conveyor - Extra set of knives - Adjustable angle stop in degrees -Documentation Country of origin: Netherlands Motor power: 15 kW Machine LxWxH: 360 x 220 x 170 cm Machine weight: 9,000 kg

Working length: 1,250 mm Cutting capacity: 13 mm Back gauge: 1,000 mm Director: Darley Delem Equipped with: - Trailer arms 3000 mm long - Foot pedal - Material discharge roller conveyor - Extra set of knives -Documentation Country of origin: Netherlands Motor power: 25 kW Machine LxWxH: 155 x 230 x 210 cm Machine weight: 5,500 kg

Offer 24559 Specifications: - max. working width 1100 mm - max. cutting capacity - at 400 N/m² strength 20 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 7 pcs - Manual backgauge 10 - 1000 mm - Front angle stop - Front support arms - Stroke rate 13 rpm - Drive 400 V / 45 kW - Table height 700 mm - Space required including back gauge, without front support arm -ca. W 2100 x H 2250 x D 2250 mm - Weight approx. 7500 kg - with: - E-foot switch - Cut line illumination

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

1250 x 13mm Hydraulic shear

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity steel St40: 10.0 mm Cutting gap adjustment adjustable rip fence Motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9,5 tons

Inv. Num. : 7539 Type: EHP 50 25/20 Producer: DARLEY Created: 1995 Parameters: Control System: Delem DA-56s Compressive force: 50 t Maximum bending length: 2500 mm Maximum distance between columns: 2650 mm Machine weight: 3400 kg

sheet width: 3000 mm plate thickness: 16 mm weight of the machine ca.: 15 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 340 t Folding length: 4300 mm CNC Brand: Delem CNC Model: DA 24 E Make Darley EHP 34 Type EHP 340 43/31 Year 1996 CNC Abkantpresse Pressbrake kantbank plooibank Capacity (metric tons) Force = 340 T Folding length (mm) L = 4.300 Down stroke or Up stroke H = 3.100 Tandem type DELEM DA 24 E Y1/Y2/X/R1/R2/V Crowning Under power by client !  

Cutting length: 1250mm, table height: 830mm, connected load: 22kW, length: 1900mm, width: 2200mm, height: 1900mm, weight: 9.6t, with documentation, without spare parts.

Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools.

A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible.

1984 Darley GS 1250x20 Guillotine shears Date of manufacture: 1984 Weight: approx. 10 tons Total pressure of 40 tons Power of the main engine 22 kW. Find more here - / Contact us at -

sheet width: 3100 mm plate thickness: 4,0 mm distance between columns: 3150 mm : mm cutting gap adjustment: ja mm connected load: 7,5 kW weight of the machine ca.: 6,0 t dimensions of the machine ca.: 3,3 x 3,0 x 1,7 m Hydraulic guillotine shears with - motorized back stop - cutting length adjustment - cutting gap adjustment - side stop - 4 support brackets The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.