used 23 for sale

Powder Coating Booth Open Spray Stand Dimensions of powder level Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 pc. 6000 m³/h Power 3 kW (electric motor) Filter 4 type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 Pcs. 1 Turbo Italy Absolute filter 1 pc. type bag filter Powder Pistol Wagner Prima Sprint Mains Standard 230 VAC Frequency 50 – 60 Hz Input compressed air 6-8 bar Output compressed air 0.05 – 5.5 Nm³/hr. Powder curing furnace Inner dimension length 3,225 mm Inner dimension width 1,400 mm Inner dimensions height 2,000 mm Insulation rock wool 150mm [75 Kg/m³] Temperature max. 220°C Fans 1 pc. 4,500 m³/h Electric Motors 1 pc 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal power 39 kW Doors on both sides 2 pcs. Manual, insulated with rock wool 150mm 70Kg/m³ Heating indirectly via thermoblock, Heating Chamber  ...

2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...

Chemical pre-treatment 3 zones for powder coating with spray ring (automatic) and manual Dimensions: Length: 8000 mm Width: 4500 mm Height: 3500 mm Max. workpiece dimensions (automatic): Length: 6500 mm Width: 1000 mm Height: 2300 mm Max. workpiece dimensions (manual): Length: 6500 mm Width: 2500 mm Height: 2300 mm Tanks are positioned at ground level with a sloping floor. Tank No.1 is thermally insulated and is heated by electric heaters. Achievement: 27 kW. Volume of each tank = 1.00 m³. For degreasing (1st tank), a medium pressure pump is used to operate the 1st spray system. The rinsing phases are also operated by a pump with medium pressure via the 2nd spray system. On the bottom i ...

Dimensions: Length: 7400 mm Width: 4000 mm Height: 3236 mm Extraction capacity: Q = 18000 m³/h P = 15 kW The cabin has a suction machine with filters to suck the powder from the cabin floor. The powder booth is set up in a pit to lower the entire height of the painting line. Manual doors are installed to enter the workpieces into the cabin. The overspray is extracted during powder coating via the floor. On the floor there is a grate for walking on and under the grate there is a second flat floor with automatic self-cleaning system, connected by air ducts with post-filter. A self-cleaning system automatically blows the powder from the bottom to the post-filter (suction machine) and consists of

1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 2. Powder Coating Booth -KG DUO-01 3. Wagner powder coating plant, – Prima Sprint – 1. Powder curing furnace 1,500 x 1,200 x 1,750 mm 1 Inner dimension length 1,500 mm 2 Inner dimensions width 1,200 mm 3 Internal dimensions height 1,750 mm 4 Outer dimensions incl. thermoblock length 2,250 mm 5 Outer dimensions incl. thermoblock width 1,815 mm 6 External dimensions incl. thermoblock height 2,006 mm, 2,296 mm incl. exhaust pipe 7 Substructure 1 set of steel profile 8 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 9 insulation walls, ceiling 1 set of rock wool 150 mm, floor is insulated with 50 mm 10 Floor Furnace Gets 2 Entry Rails for Tray Wagons 11 Temperature 220°C 12 fans 1 pc. 2,600 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal power 14 kW 15 hinged doors, single ...

1.Powder curing furnace 2,000 x 1,900 x 2,000mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Inner dimension height 2,000 mm 4 Outer dimensions incl. thermoblock length 2,300 mm 5 Outer dimensions incl. thermoblock width 2,300 mm 6 Outer dimensions incl. thermoblock height 2,700 mm 7 Substructure 1 set of steel profile 50 x 50 mm 8 walls 1 set of double-sided galvanized sheets 1mm, outside RAL 5005 9 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 10 floor stove gets 2 entry rails for tray wagons 11 Temperature 220°C 12 fans 1 pc. 6,000 m³/h 13 electric motors 1 pc 1.1 kW , 1450 rpm, 3 F, 50 Hz 14 Thermal output 36 kW = 30,960 kcal/hour 15 wing doors on one side 2 pcs insulated with rock wool 150mm 70Kg/m² Heating Indirectly via thermoblock Thermoblock 1 set stainless steel INOX AISI 316 heat-resistant fans and heat-resistant bea ...

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Mass of tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating Lmmuapd8S 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Outer dimensions inc ...

Powder coating plant oven, cabin, etc. Powder Coating Booth Open Spray Stand Dimensions of powder level Width 2,000 mm Depth 2,100 mm Height 2,200 mm Fan 1 pc. 6000 m³/h Power 3 kW (electric motor) Filter 4 type filter cartridges (à ⌀325 x 600 [mm]) Electromagnetic valves 2 Pcs. 1 Turbo Italy Absolute filter 1 pc. type bag filter Powder Pistol Wagner Prima Sprint Mains Standard 230 VAC Frequency 50 – 60 Hz Input compressed air 6-8 bar Output compressed air 0.05 – 5.5 Nm³/hr. Powder curing furnace Inner dimension length 3,225 mm Inner dimension width 1,400 mm Inner dimensions height 2,000 mm Insulation rock wool 150mm [75 Kg/m³] Temperature max. 220°C Fans 1 pc. 4,500 m³/h Electric Motors 1 pc 1.5 kW, 1450 rpm, 3 F, 50 Hz Thermal power 39 kW Doors on both sides 2 pcs. Manual, insulated with rock wool 150mm 70Kg/m³ Heating in ...

2.1.1. Walk-in cleaning booth, pre-treatment for steel and aluminium The cleaning booth is designed for automatic cleaning. Spraying can be done at medium pressure. There are 7 different spray tanks in the cabin. The part sizes are max. L= 6,000mm, W= 2,000mm, H= 2,300mm. 1 Dimensions of the cab length 6,500 mm Width 3,000 mm Height 3,600 mm 2 dimensions of the pre-treatment complete Length 6,600 mm Width 4,640 mm Debpm0Nom Height 4,300 mm 2.1.1.1. 1. Degreasing/Neutral Pickling Process Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.2. 2. Process Acid Mineral Pickling Heated bowl, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2.1.1.3. 3. Rinsing Process 1 in this chamber rinsing is done at ambient temperature, time = 0.75-1.5 minutes, draining time = 1 minute 2.1.1.4. 4. Rinsing Process 2 in this chamber is rinsed at ambient tem ...

Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Ou ...

Aircooled chiller Systemair SYSCREW 440 AIR EVO HSE CO 443 kW Cooling capacity: 443 kW / 125.97 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 1 pcs. Bitzer CSH7593-90Y-40P (screw) + 1 pcs. Bitzer CSVH24-125Y-40A (screw, inverter) Type of refrigerant: R513a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.7x2.25x2.5 m. Weight: 4759 kg. Working hours: 3/3 h. Condition: New

Vertical machining center Manufacturer: DMG Type: DMU 80 eVo Year of Make: 2013 Control: Heidenhain ITNC530 HSCI Axes: 5 Travel X: 800 mm Y: 650 mm Z: 550 mm Tool changer: 30 places Speed: 18,000 rpm Drive power: 18.9/14 KW (40/100%ED) Weight: approx. 12.000 Kg - Swivel rotary table 800x700 - Loading weight 600Kg, direct measuring systems incl. Table cooling - Measuring probe, Heidenhain TS 649 - Laser measurement - 3D Quickset (software) -Conveyor - IKZ 40bar/23 litres/min Tank 600 litres - Electronic handwheel - Operating mode 4 - Direct displacement measurement system - Heat exchangers for spindle and drives - Active cooler for control cabinet Errors and prior sale excepted.

Control Mazatrol Matrix Max. Rotary Diameter 760 mm Max. turning length 1,524 mm Travel X-axis: 630 mm Y-axis: 230 mm Z-axis: 1,585 mm W-axis: 1,530 mm B-axis -30 to 210° Rapid traverse X/Y/Z/W 50/40/50/30 m/min Main spindle Drive power: 30 kW Max. spindle speed 3,300 rpm C-axis Max. bar passage: 102 mm Sub-spindle Drive power: 26kW Max. spindle speed 4,000 rpm C-axis Milling spindle Drive power: 18.5 kW Max. spindle speed: 12,000 rpm B-axis: 0.0001° Capto C6 Tool magazine / ATC 80 tool positions Max. tool diameter: 90/125 mm Max. tool length: 400 mm Max. tool weight: 10 kg Special equipment Cooling by the spindle High pressure pump 70 bar 20 l/min . PLC with 7 pressure levels Chip conveyor MAYFRAN CONSEP 2000 II 70 bar 20 l/min . PLC with 7 pressure levels Interface for bar feeder Automatic Parts Catcher Synchronized Threading ...

Hunkeler RE-MAT register punch, machine number 52343/30, in good condition, immediately available Rsbr Sbjrc Attj Nwkeu We have two other machines in our warehouse. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic delivery Magnetic disk Filter system

Made in EU Warranty for 30 months Completely new Generator Set Specifications: Model No.: EQ-I4536 Primary power: 60 kVA / 48 kW Standby Power: 66kVA / 52.8kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF45SM1A Bore x Stroke (mm): 104 x 132 Displacement (L): 4.5 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 2220 mm Width: 960 mm Height: 1258 mm Weight Open: 1101 kg (Note: Here it says Weight Open despite the heading Dimensions of the generator set (Closed). I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers  ...

Generator Set Specifications: Model: EQ-I400320 Primary power: 500 kVA / 400 kW Standby power: 520 kVA / 416 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: CURSOR13TE7W Bore x Stroke (mm): 135 x 150 Displacement (L): 12.9 Compression ratio: 16.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 4810 mm Width: 1600 mm Height: 2560 mm Weight Open: 4890 kg (Note: Here it says Weight Open despite the heading Dimensions of the generator set (Closed). I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil ...

Generator Set Specifications: Model: EQ-I200160 Primary power: 200 kVA / 160 kW Standby power: 220 kVA / 176 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TM7 Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17.5:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3150 mm Width: 1056 mm Height: 1900 mm Weight Open: 2000 kg (Note: Here it says Weight Open despite the heading Dimensions of the generator set (Closed). I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil line ...

Generator Set Specifications: Model: EQ-I250200 Primary power: 250 kVA / 200 kW Standby power: 275 kVA / 220 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine brand: Iveco Engine Model: NEF67TE8P Bore x Stroke (mm): 104 x 132 Displacement (L): 6.7 Compression ratio: 17:1 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Dimensions of the generator set (closed): Length: 3770 mm Width: 1350 mm Height: 2370 mm Weight Open: 2790 kg (Note: Here it says Weight Open despite the heading Dimensions of the generator set (Closed). I left it as it is in the original.) Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines ...

Rheinmetall axle Verse No: 2520-12-341-1309 TKZ : 2300002-100 220 000

ON HAND STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-DSV4536 Primary power: 60 kVA / 48 kW Standby power: 60 kVA / 48 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Doosan Engine Model: D34 Displacement (L): 3.41 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2430 mm Width: 1056 mm Height: 1600 mm Weight Open: - kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and cables Elect ...

ON HAND NEW STAGE V 30 months warranty Stamford Alternator ComAp Control Generator Set Specifications: Model: EQ-YSV4536 Primary power: 45 kVA / 36 kW Standby power: 49 kVA / 39 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm (revolutions per minute) Engine Specifications: Engine Make: Yanmar Engine Model: 4TNV98CT-IYE Displacement (L): 3.32 Induction: Turbocharged & Intercooler (or Aftercooler) Fuel System: Inline (Series) Regulator Type: Mechanical Emissions: Euro Stage V Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1263 mm Weight open: 960 kg Standard features: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Stamford alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Preheater (or preheater) Lubricating oil and antifreeze Batteries and ...

Code: 0467 Brand: SML - ITALY Model: AMBRA 1300 K R R T - CE Standard 3-belt Wide belt sander for furniture, custom-made furniture, panels, doors, frames, , solid wood panels and frames, veneered, and various - CE Standard Features: Sturdy structure Working width mm 1300 Max working thickness mm 160 Min working thickness mm 3 Sanding belt size mm 2620 x 1330 Variable belt feed speed Automatic table lifting Automatic table positioner with display Composition: 1° Group: Rubber Calibrating Roller - Diameter mm 300 - SH 85 - Motor Hp 20 - Automatic device for inclusion and exclusion of the group 2° Group: Rubber Sanding Roller - Diameter mm 300 - SH 55 - Motor Hp 20 - Automatic device for inclusion and exclusion of the group 3° Group: Roller/Pad for panel finishing- Motor Hp 15 - Belt speed variator - Belt cleaning blowers Steel shoe pressors Inlet and outlet r ...

Usable work area with cutting head: 1000 x 1200 mm Usable work area with milling head: 950 x 1150 mm Cutting/milling speed: 10 mm/sec - 500 mm/sec Acceleration: up to 5 m/sec2 Mechanical/addressable resolution: 0.01 mm Static repeatability: 0.02 mm Software data format: ASCII/HPGL RS-232 interface or RS-232/USB converter Plotter input buffer: 16 kilobytes Power requirements: 230 volts +-10% / 50-60 Hz / 450 VA Software: CoCut trial version can be downloaded for free. Converter is missing to be able to mill.

LARGE FORMAT PRINTER AGFA JETI 3324 SL BASE SOLVENT RTR (roll to roll) 6C (PRINTS ON TARP, CLOTH BANNER & VARIOUS MATERIALS) M. No.: 3.324287 • Large format printer with solvent ink • Solvent based ink: 6 colors (4CMYK+2CM light) • Printing width: 3.2 M (3200 mm) • 24 high-performance Spectra piezoelectric printheads • 600 dpi (2-sided printing) • Max. roll weight up to 230 KG • Up to 64 m2 / h • Jeti software RIP (E9YC4000) Equipment / additional information: • Carrier rewind unit: Jeti 3M Solvent (E9WF2000) • Retro Heater Unit (E9ZZL000) • Jeti Spectra head 24 SL PH 3324 (E91UE000) • Vinyl Loader (E9WKB000) • Vinyl Roller Assy (E9ZUA000) • Spare parts kit for Jeti 3324 (E9V4C000) • Backlit camera (E9Z2P) • Complete set of new filters (12 pieces) • 10 meters of new hoses also included • Three sets of new connectors • Original ...

M. No.: 701 235 Counter: 54,356,348 Format (cm): 36x52 Dampening: Stenz-Dampening-System

BARCODE PRINTER / LABEL PRINTER WITH COLOR RIBBONS Config. No.: 096-104-00404 // Ser. No.: 9056423 Equipment / Additional information: Maximum Print Area: Width: 3.4”/86mm Length (with standard memory): 39”/991mm Resolution: 300dpi/12dots/mm Maximum Print Speed: 8”/203mm per second Label and liner width: 0.79”/20mm– 3.54”/90mm Ribbon width: 0.79”/20mm– 3.4”/87mm

Krauss Maffei KM 200-750 CX with the Wittmann-Krauss Maffei LRX100-1811 robot Year of Make: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Spray pressure: 2336 bar Dosing volume: 318 ccm Clamping unit: Clamping force: 200 t Tiebar spacing: 560x560 mm Size of the clamping plates: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch Screen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min. tool installation height - 350 mm Air Valve x 2 Hydraulic core pull x 2 Control with hot runners x 24 Hardened injection unit - Bimetal Parallel movements Proportional valve on the injection unit – precise injection Kistler Sensor - Tool Pressure Control Robot Wittmann-Krauss Maffei LRX100-1811 Year of Make: 2014 High-speed robot 5-axis robot: 3  ...

Krauss Maffei KM 160-750 CX with the Sepro Industrial Robot SDR 22S robot / Hybrid machine / Operating hours: approx. 34,000 h in automatic mode Year of Make: 2014 Injection unit: Screw diameter: 45 mm Injection weight: 289 g Spray pressure: 2336 bar Dosing volume: 318 ccm Clamping unit : Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 820x845 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - Touch screen Additional equipment: Very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 34,000 h in automatic mode Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Machine with cylinder / battery with compressed nitroge ...

Krauss Maffei KM 110-700 C2 Year of Make: 1998 Injection unit: Screw diameter: 45 mm Injection weight: 278 g Spray pressure: 2336 bar Dosing volume: 305 ccm Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC IV Additional equipment: Machine in very good technical condition Euromap 12 Robot interface Air Valve x 1 Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Parallel movements Proportional valve on the injection unit – precise injection Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) The machine was regularly serviced by the authorized service Krauss Maffei in Switzerland Metrics: Weight: 6200 kg Length/Width/Height: 4.66x1.51x2.19 m Drive: Pumps/motor: 18.5 ...

Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of Make: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Spray pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - Touch Screen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Sprue Picker Sepro Industrial Robot 55 Year of manufacture: 2018 It is possible to buy a Moretto raw material feeding system at an additional cost The set includes: - Screw dosing device, volumetric with container - Conveyor with proportional valve Metrics: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating c ...

Steel construction - mezzanine, 500kg/m2, approx. 2,000 m2 available - used - : Ex-site price: 150.000.-€ (net), dismantled, packed and loaded. For an extra charge are available for approx. 1,250m2 on gratings! Manufacturer: Pro Man Type: Mezzanine Year of Make: 2007 Max. stage load: 500kg/m2 Floor height (upper edge of floor covering): 3,462mm Bottom edge beam: 3,230mm Dimensions: 71,000 mm x 28,000 mm. approx. 1,988 sqm OK Platform: 3,462 mm UK Stage: 3,220 mm Flooring 38 mm chipboard 1 pallet transfer station Wheelbase: 4 x 4m Stage covering partly chipboard (38mm), partly gratings Bottom edge chipboard: white Condition: very good Available: immediately Location: Niedernberg near Aschaffenburg There are additional costs for the buyer: new screws, etc. Accessories (stairs, railings, pallet transfer stations) are unfortunately no longer available! Cu ...

Pallet magazine / pallet tower / pallet dispenser, WTT, up to max. 50 pallets – used – Price ex location: only 9.950.-€ (net), dismantled, packed and loaded! Manufacturer: WTT Fördertechnik Model: Pallet Magazine Type: 725 Year of Make: 2011 44 pallets (EUR pallet size) fit into the tower. It is operated via a Siemens control panel on the control cabinet. 1 to a maximum of 6 pallets can be stored or retrieved at once. For Euro pallets according to DIN EN 13698-1 (dimensions: length: L= 1,200 mm / width: W= 800 mm), weight: max. 32 kg/pallet Conveying direction: longitudinal Running surface: flat (conveyable) Pallets not shrinked Special features: Sprinkler system on site (not part of the sale) Duration/day: 24h, 5 days/week Device dimensions: Depth: approx. 2,365mm Width: approx. 1,420mm Height: approx. 7.50m Specifications: Connection voltage: 230/400 ...

Aircooled chiller YORK YCAL 0377SBХА 360 kW Cooling capacity: 360 kW / 102.36 tons (12/7 — 35°C) Year of manufacture: 2004 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 6 pcs. York (Copeland) ZR300KCE-TWD-522 (scroll) Type of refrigerant: R407C Number of fans: 6 pcs. Dimensions: 4.3x2.3x2.5 m Weight: 3964 kg Working hours: 3666/3320/3529/3319/3460/4023 h. Condition: Good

Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition Year of Make: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 18,153 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All o ...

Boy 55A Pro / Operating hours: 16,624 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit : Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 16,624 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All  ...

Boy 55A Pro / Operating hours: 17,083 in automatic mode / Machine in very good technical condition Year of Make: 2017 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Spray pressure: 1508 bar Dosing volume: 136.1 ccm Clamping unit: Clamping force: 55 t Spar spacing: 360x335 mm Size of the clamping plates: 665x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha - Touch Screen Additional equipment: Machine in very good technical condition Operating hours: 17,083 in automatic mode Pneumatic core x 2 Hardened injection unit - Bimetal The machine has been regularly serviced by the authorized Service Boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Metrics: Weight: 2430 kg Length/Width/Height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating capacity: 7.7 kW Total power: 18.7 kW All o ...

Code: 0437 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz NEW Caterpillar G3516H, 2000 kW, 400v. 50 Hz Ten (10) New Caterpillar G3516H, 2000 kW, 400v. 50 Hz. Natural gas generator sets. These 2500 kVA units are set for continuous an parallel to gird applications. They come with a prelube pump, Jacket Water Heater, no CSA or EU certifications, 4.3 EMCP control panel, 1800 frame generator, open skids Manufacturing year 2023 & 2024.

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 10-1/1 Gas model with 10 trays GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without any supervision. This is a demonstration device with a 24-month manufacturer's warranty from the date of commissioning. The device has been tested in our in-house specialist workshop and is fully functional. The RRP is €17,500 net The price quoted is net plus 19% VAT. Service: We will be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our equipment service for you: •2-year manufacturer's  ...

3 colors stack flexo printing machine. Ideal for aluminium because of the length of the machine  Bj 1998 / Upgrade 2023, Working width = 420 mm Print width max = 400 mm, Print width min = 200 mm, Repeat = 330 - 610, Format change infinitely, Speed = 200 m/min, On - unwinder max diameter = 1000 mm, Turnstile but manual change. Tension control with dancer rollers.

NTS 256 Wet Grinder Whetstone diameter 250mm Sharpening stone width50mm Pull-off wheel diameter 200mm Speed 90 – 160min ̄¹ Weight (net) approx. 14.2kg Input power 0.15kW S1 Connection voltage 230V Mains frequency 50Hz SCOPE OF DELIVERY Water tank Peeling paste Angle gauge Universal grinding device G&STÜ-5750256

NTS 201 Wet Grinder Whetstone diameter 200 mm Whetstone width 40mm Pull-off wheel width 30mm Pull-off wheel diameter 200mm Speed 115 rpm LxWxH: 480 x 340 x 375mm 0.15kW 230V 50Hz Weight 9.2kg G&STÜ-5750201

Slicer with scale / slicer Bizerba Type: VSP Specifications: 220-240 Volt / 50/60 Hz / 1A Year of Make: 2022 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife including original Bizerba sander with normal carriage for sausage or cheese with integrated checkweigher up to 3 kg Luminous flux / 230V Schuko plug Function checked, machine ready for immediate use! Original price approx.: EUR 8.650,- Condition, see original pictures! If you have any questions, email or call.

Mobile trough vibrator for vibratory finishing Type: TV25-M TROG VIBRATOR Manufacturer: Eurotec Innovation GmbH Gross volume: 50 liters Mobile and Universal - Mobile mass finishing system with integrated preparation of process fluids - Integrated screen box for separation of workpiece and abrasive media - Compact design for large work containers including sound insulation - Plug & Play System: Plug in 230V power supply line and get started Nwo Dkanrjhmp Dqs Aog Trough vibrators are characterized by their compact design with a universal application. Thanks to their U-shaped worksheets, very large workpieces can be machined relative to the size of the system. Our mobile TV is unique in that all components required for mass finishing are compact and mobile mounted on a trolley. An integrated cascade cleans the process fluid, workpieces can be separated by means of a sieve  ...

Continuous cutter Bruendler VKM 12, 2 cutting systems can be used – colloid head and rotor/perforated disc, incl. accessories (see photo), drive with new bearings and sealing rings, Connection 400V, dimensions LxWxH approx. 105x62x123cm, weight approx. 194kg, year of construction 1992, good used condition, fully functional

Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox Bia3Cuosnk -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Hydraulic clamping -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900Kg

Suction nozzle Ø 300 mm Nominal flow 6000 m³/h Min.vol.strom 5.086 m³/h Pressure difference 2550 Pa (at the interface at 5,087 m³/h) Filter area 28.0 m² Motor fan 7.5/0.18 kW Rated current 15.0 A 3 x 400 V, 50 Hz Motor vibration 0.18 kW Rated current 1.5 A 1 x 230 V, 50 Hz Weight 655 kg

Vecoplan shredder, type VAZ 110, built in 2017, with hopper and suction nozzle. A video is available at short notice. Manufacturer: Vecoplan Type: VAZ 110 Year of Make: 2017 Drive: 22 kW Filling opening: 1200 x 1075 mm Rotor diameter: 250 mm Rotor length: 1075 mm Rotor speed: 90-250 rpm Number of cutting tools: 27 Throughput: 2 cbm/h Screen hole size: 20mm Suction nozzle diameter: 200 mm Dimensions: approx. 2355 x 1590 x 980 mm (LxWxH) Weight: approx. 1800 kg Accessories: Spare parts package sieve 20 mm, cutting tools, etc. Materials: wood waste, foils, packaging material, chipboard, paper, textiles Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangeme ...

Baler Presto CC 20 M, built in 2019, press force 20 t, with restraint. Specifications: Manufacturer: Presto Type: CC 20 M Year of Make: 2016 Press force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Binding: 3-fold, manual Throughput at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, foil Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or YouTube channel. Viewings are possible at any time by arrangement. We are also happy to carry out tests with your material on request for an expense allowance. We will also be happy to answe ...