used BURKLE for sale

Veneer Press Moulding Press Bürkle Type FPMU Total baling area 2200 mm x 1100 mm divided into 3 faces, each 700 mm x 1100 mm the surfaces can be pulled out to the front per pressing surface 2 press pistons diameter 50 mm Maximum opening 430 mm Press surfaces not heated With emergency stop ripcord Hydraulic pump 1.1 kW Dimensions 3000 mm x 1300 mm x H 1920 mm

Roll Coater Bürkle Paint Roller Coating Machine Type SLC 1300 Machine No. 8540 Year of construction 1998 Working width 1300 mm Passage height 3 mm – 120 mm Workpiece length min. 350 mm Feed speed 6 – 30 m/min. Rubberized Paint Application Roller 55 Shore Paint application roller diameter approx. 238 mm Dosing roller chrome-plated Dosing roller diameter approx. 174 mm Counter roller diameter 186 mm Required pressure 6 bar Motorized height adjustment of the application roller Machine weight approx. 1500 kg Dimensions 800 mm x 2800 mm Instruction manual available Declaration of Conformity available With driven roller conveyor 13 rolls, wheels diameter 80 mm Roll width 1300 mm Dimensions 2500 mm x 1550 mm

Veneer press Bürkle Chair seat press and molding press Type SE 23 60/50 2 floors Electrically heated plates Pressing area 600 mm x 550 mm Maximum opening per floor approx. 180 mm Maximum opening 400 mm Plate thickness of the middle plate 45 mm Piston diameter 160 mm Hydraulic motor 1.5 kW Pressure according to the display up to 600 kg/cm² Dimensions 1400 mm x 550 mm x H 2010 mm

1- one combination of lay-up, turning and unloading 2- BTF Multifoiler 3- Multi-Pin-System Useful area 1330x2630 mm Max size of board 1250x2550 mm Min foil width 1400 mm

- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images

Recently reduced Commissioned on 31-01-1997 Back on sale due to time wasters Professionally dismantled Ready to load Spare rolls of veneer Spare oil

Two identical Bürkle veneer presses are available. Press area: 1200mm/2500mm. Stages: 1. piston: 6. piston stroke: 450mm. Total pressing force: 16t. Machine dimensions X/Y/Z: approx. 3250mm/1350mm/1950mm. Weight: approx. 2500kg. On-site inspection is possible.

Working width: 1300mm, workpiece thickness min./max.: 3mm/80mm, workpiece width min./max.: 10mm/1300mm, max. workpiece length: 100mm, workpiece height min./max.: 3mm/120mm, roller application speed: 5m-30m/min, feed: 6m-30m/min. Documentation available. On-site inspection is possible.

Encolleuse Bürkle RCG 700 Bürkle RCG 700 2017 Find more here - /

Manufacturer: IST, Type: UV Trockner, Year: 11.97, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 3, kW power 1 lamp: 10, kW power all lamps: 30, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.97

Manufacturer: IST , Type: UV Trockner, Year: 11.1997, Work piece width min-max mm: 10 - 1.300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1.300, Number of lamps: 1, kW power 1 lamp: 10, Lamps straight installation: yes, Adjustable: halblast, Power per lamp watt UV: 80, Conveyor lenght mm: ohne, Conveyor lenght mm: ohne, Year :11.1997

Manufacturer: Bürkle, Type: EFA 1300, Year: ca.1990, PVAC-Dispersions-Folienkleber: yes, Work piece length min-max mm: 500-3200, Work piece width min-max mm: 200-1300, Work piece thickness min-max mm: 3-60, Kaschiergeschwindigkeit: 25, Doppelseitig Folienauftrag: yes, Folienrollenmagazin: 1, Feeding speed continous adjustable: yes, Inlet conveyor: yes, Querreinigungsbürste: yes, Bürstmaschine längs: yes, Plattenvorwärmzone: no, Kleberauftragmaschine : yes, Abwickeleinheit: yes, Prägekalander: yes, Leimfilteranlage LFA: yes, Intermediate transport mm: 3000, Year :ca.1990

Manufacturer: Bürkle, Type: EFA 800, Year: 1984, Working width mm: 600, Veneer thickness min mm: 0,15, Veneer thickness max. min: 0,7, Feeding speed max m/min: 8 - 35, Feeding speed continous adjustable: yes, Year :1984

Manufacturer: Bürkle Ersatzlackwalze 30 shore 1300 mm 80 Gang gerillt Neu<CRLF>Type: Lack-Ersatzwalzen, Spare roller: DAL/SAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1420, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: ca.20, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: 80 Gang/gerillt,

Manufacturer: Bürkle Lackauftragswalze 1416 mm ca 25 mm Gummi shore ca 25 Ersatzwalze Neu, Spare roller: SAL/SLC/DAL, Bürkle: yes, Roller rubber coating: 238, Rubber coating length cm: 1415, Shore Härte: ca.25, Approx. thickness of rubber coating in mm: 30, Stahlkerndurchmesser ca. mm: 187, Creasing on a 1 cm: walze ist gelasert, Wedge follower: yes, Rubber coating defective: neu,

Manufacturer: Bürkle Lackwalze 1416 mm 30 shore 25 Gummi<CRLF>Gerillt , Roller rubber coating: gerillt, Rubber coating length cm: 1416, Shore Härte: 30,

Manufacturer: Bürkle UV Trockner, Type: UV Modul, Year: 2001, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 100, Number of lamps: 1, kW power 1 lamp: 80 W/cm, Lampen gerade eingebaut: yes, Adjustable: no, Position of lamps: gerade, Conveyor lenght mm: 5000, Chain pitch mm: 76, Drive power kW: 1,1, Working height in mm: 950 +/-, Through running hight mm: 3-80, Feedin speed m/min: 5-25, Rod transportation: yes, Year :2001

Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 35-40, Approx. thickness of rubber coating in mm: 15, Stahlkerndurchmesser ca. mm: 200, Diameter of neck: 40, Total lenght mm: 1970, Rubber coating defective: no,

Manufacturer: Bürkle Zentrierollengang, Year: 2002, Control: no, Working length mm: 4500, Working widht mm: 1400, Engine power kW: 0,75, Durchmesser Rolle mm: 75, Rollenmittenabstand: ca.200 mm, angetrieben über Flachriemen: yes, Stop straightedge: yes, Pneumatically controlled: yes, Anschlaglineal verstellbar: yes, Anschlagkante Höhenverstellbar: no, Freilaufrollen: no, Year :2002

Manufacturer: Bürkle Transportband ohne UV Einheit, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1400, Number of lamps: 1, kW power 1 lamp: 11, Lampenlänge mm: 1400, Reflektor von oben abnehmbar: yes, Gesamtlänge UV Modul mm: 2500, Lamps straight installation: yes, Conveyor: 6-30,

Manufacturer: Bürkle, Type: Bürste, Working widht max mm: 1300, Diameter of brushes: 150,

Manufacturer: Bürkle, Type: Wellenträge Ersatzbürste, Year: ca.1998, FREETEXT1: Träger für Beizvertreiber Maschine, FREETEXT2: mit Schnellspan möglichkeit, Year :ca.1998

Manufacturer: Bürkle Lackersatzwalze 1416 45 shore, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 45, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 194, Diameter of neck: 38,

Manufacturer: Bürkle, Type: UV Transportband, Year: 2001, Work piece width min-max mm: 1350, Lampen gerade eingebaut: 1, Conveyor lenght mm: 5000, Drive power kW: 1,1, Year :2001

Manufacturer: Wild, Type: Abstapelautomat, Year: 2001, Control: Bürkle, Work piece width min-max mm: 500-1250, Min.-max. workpiece length in mm: 500-3000, Min.-max. workpiece height in mm: 3-25, Vacuum feeding: yes, Longitudinal feeding: yes, Stacking pattern, double-row: mehrspurig, Stack height in mm: 1000, Cycles approx.: 6, Removal of protective boards: yes, Erection in a pit: no, Drain roller operation: yes, Year :2001

Manufacturer: Bürkle Gegendruckwalze 1300 mm 8 mm Gummi shore 80 muss geschliffen werden, Bürkle: JA, Roller rubber coating: yes, Rubber coating length cm: 1300, Shore Härte: ca.80, Stahlkerndurchmesser ca. mm: ca.170,

Manufacturer: Bürkle SLC Dosierwalze 1416 mm Neu 174 Durcmesser mm Beheizbar, Spare roller: Dosierwalze, Bürkle: Neu, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1416 mm, : SLC, : 174, : Chrom,

Manufacturer: Bürkle Stahldosierwalze 1415 mm 174 D mm, Spare roller: Dosierwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1415, : SLC, : 174, : Chrom,

Manufacturer: Bürkle Stahldosierwalze 1415 mm 234 Durchmesser, Spare roller: Spachtelwalze, Stahlkerndurchmesser ca. mm: yes, Diameter of neck: 1300,

Manufacturer: Bürkle, Type: U110 , Year: 1990, Stages: 3, Lateral press: yes, Heizplattenmasse ca.mm: 3000x1300, Anzahl der Etagen: 3, Zylinderhub mm: ca.400, Beschickungsseite: längs, Landing opening mm: ca.100, Heizplatten aus Stahl: Stahl-Aluminium, Temperatur min-max: 150, Heated by: Warmwasser, Gesamtdruck KN: 1100, Anzahl der Presszylinder: 8, Time switch: yes, Press length mm: 3000, Pressing width mm: 1300, Year :1990

Manufacturer: Bürkle DAK, Spare roller: Leimauftragsmaschine, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca.60, Approx. thickness of rubber coating in mm: gerillt, Stahlkerndurchmesser ca. mm: ca.230, Creasing on a 1 cm: ca.5, Gummiqualität : neu,

Manufacturer: Bürkle, Type: Querwagen, Year: 2001, Overall length mm: 3300, Total hight mm: 350, Working widht mm: 1300, Driven: yes, Working widht mm: 1300, Width total mm: 1500, Year :2001

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Manufacturer: Bürkle Chromwalze beheizbar 1416 mm/184, Spare roller: SLC 1300, Bürkle: yes, Roller rubber coating: no, Shore Härte: ca 60, Total lenght mm: 1416,

Manufacturer: Bürkle Lackauftragswalze 1416 mm 40 shore gelasert Neu Neu Gummiert, Spare roller: SAL/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1414, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: ca.192, Creasing on a 1 cm: Laser Profil,

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 40 gebraucht Ersatzlackwalze, Spare roller: SAL/DAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1414, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: ca.19192, Application roller rubber coating mm: 20,

Manufacturer: Bürkle , Spare roller: SAL/DAL/SLC, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1410, Shore Härte: ca.40, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: ca.192,

Manufacturer: Bürkle Lackauftragswalze 1416 mm 65 shore Neu gummiert, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 65, Approx. thickness of rubber coating in mm: ca.10,

Manufacturer: Bürkle Lackwalze 1416 mm 35 shore , Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: 35, Approx. thickness of rubber coating in mm: ca.25<CRLF>,

Manufacturer: Heesemann, Type: Bürstenwalze Anderlon, Year: aus MFA 8, Widht of roller coater: 1400/150, Year :aus MFA 8

Manufacturer: Bürkle Lackwalze 1416 mm 60 shore , Spare roller: Ersatzwalze , Hymmen: yes, Venyeskob: 1416,

Manufacturer: Bürkle Lackauftragswalze 1416 mm shore 35 gerillt Zustand gut, Spare roller: SLC DAL, Bürkle: yes, Roller rubber coating: yes, Shore Härte: 35, Approx. thickness of rubber coating in mm: 25, Stahlkerndurchmesser ca. mm: 189, Creasing on a 1 cm: ca.80, Wedge follower: yes,

Manufacturer: Bürkle Leimautragswalzen 1400 + 7 mm Bordscheiben, Spare roller: Leimauftragsmaschine, Bürkle: yes, Rubber coating length cm: 1400 + Bordscheiben, Approx. thickness of rubber coating in mm: ca.236 mm aussen,

Ersatzwalze für: SLC, Bürkle: yes, Gummiert Walze: 35, Gummierte Länge cm: 141, Shore Härte: 35, Stärke Gummierung ca. mm: 20, Stahlkerndurchmesser ca. mm: 195,

Manufacturer: Bürkle Lackauftragswalze 1416 mm 45 shore glatt 20 mm muss geschliffen werden, Spare roller: SLC/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1416, Shore Härte: ca.45, Approx. thickness of rubber coating in mm: 20, Stahlkerndurchmesser ca. mm: 187, Can be reground: yes,

Manufacturer: Transportveirteiler Wagen, Type: Bürkle BRB-SL-32/15-SA, Year: ca.2000, Control: no, Working length mm: 3150, Working widht mm: 1200, Engine power kW: ca.3, Total power kW: ca.8, Feeding speed min-max m/min: variabel, Durchmesser Rolle mm: 120, Rollenmittenabstand: ca.240, angetrieben über Kette: yes, Total hight mm: Bauhöhe ohne Fahrwerke 260/mit Fahrwerke 100 mm mehr, FREE TEXT: Gesamtitiefe ca.2000/Auf und Abwickelstation Kabel/Schaltschrank/Gabelstapler Aussparung, Year :ca.2000

Manufacturer: Bürkle, Year: 1997, Type: BTF 1426, Work piece width min-max mm: 1100, Min.-max. workpiece length in mm: 2350, Min.-max. workpiece height in mm: 6-35, Working widht max mm: 1180 X 2430, Heating system: Thermoöl, Heating power in kW: 25, Foil magazin spaces: 10, Placing table: 3, Through running machine: yes, Folienschneideeinrichtung: yes, Through running machine: yes, Year :1997

Manufacturer: Bürkle, Type: SAL, Year: ca 1995, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 8-120, Working height: 950, UV-laquer roller: yes, Widht of roller coater: 1350, Widht of metering roller: 1350, Dosierwalzenantrieb m/min: regelbar, Attachment bracket roller: yes, rbakel: yes, Feeding speed min/max: 5-25, Roller lift out: yes, Year :ca 1995

Manufacturer: Bürkle, Type: Dosierwalze, UV-laquer roller: yes, Widht of metering roller: 1300, für Maschine: SLC, shore: Chrom,