used SCM for sale

SCM Sandya Uno wide belt sander Working width 900mm Working height 150mm 1 sanding unit Sanding unit with boots Two grinding speeds Electric raising and lowering of the sanding unit Pneumatic oscillation New carpet Motor power 4kw CE Certified

SPECIFICATIONS: Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW

Motor 18.5 kw Roller diameter 100 mm Rollers Steel + Rubber Dimensions 1350 x1670 x2000 mm Weight 1000 kg

Table length 2200 mm 4 knives

working width 180mm working suction 120mm 4 heads two feed speeds drive roller in front of the first head star/delta boot adjustment of heads in two axes Electric pressure beam adjustment spindle rotation 6000 rpm

working width 1100mm Calibration unit with metal shaft Combi unit with two rubber rollers and boot Oscillation on photocells Activating the machine functions from the panel pneumatically shot boots two feed gears year of production 2008 electric table adjustment Material thickness gauge

working width: 1100 mm Rubber roller unit Combi unit with metal shaft motor power 18.5 kW 20 section boots Boot control smooth adjustment of shaft speed smooth speed control of the conveyor Vacuum Table brush for cleaning after sanding blowing of sanding belts Oscillation on photocells Overall dimensions: width: 1640 mm height: 2240 mm thickness: 900 mm (without tables), 2140 mm (with tables)

working width 1100mm Calibration unit with metal shaft Combi unit with rubber roller and boot Pneumatic boots Oscillation with photocells Material thickness gauge smooth adjustment of paper speed motor power 11kW pneumatic belt tensioning sanding belt length 2620mm Activating machine functions from the control panel

working width 900mm Combi unit with rubber roller and boot electric table adjustment Material thickness gauge two feed gears star/delta boot weight 760kg

working width 230mm working height 120mm 6 heads Head Arrangement: Bottom/Right/Left/Top/Bottom/Universal adjustment of heads in two axes spindle diameter 40mm spindle rotation 6000 rpm smooth feed speed control digital displays of working dimensions Electric pressure beam adjustment pneumatic pulling roller clamps grooved top

working width 230mm working height 120mm 6 heads Head Arrangement: Bottom/Right/Left/Top/Bottom/Universal spindle rotation 6000 rpm Spindle adjustment in two axes pneumatic pulling roller clamps smooth feed speed control year of production 2000

working width 240mm working height 120mm 6 heads Head arrangement: lower/right/left/upper/upper/lower spindle rotation 6000 rpm - the last two 8300 rpm Spindle adjustment in two axes spindle diameter 40mm electric planing height adjustment smooth feed speed control pneumatic pressure of the pulling rollers

working width: 240 mm working height: 150 mm Number of heads: 5 Head layout: bottom/right/left/up/down spindle speed: 6000 rpm spindle diameter: 40 mm minimum head size: 100 mm maximum head size: 200 mm motor power: 3x 5.5kW; 2x 4kW; 2.2kW grooved top pneumatically pressed rollers year of production: 2010

Connected load 380V 15.8A Saw motor 5.5kW Scoring motor 1.2kW Electric height adjustment Electric swivel with LED display Length of trimming carriage 3000 mm Cutting width 1200 mm PSV with narrow hood Table extension 1000 x 470 mm Scoring pneumatically height-adjustable

Connected load 380V 14A Motor power main motor 5.5kW Scoring motor 0.9kW Length of trimming carriage 3200 mm Cutting width 1400 mm Manual rip fence with LED display EASY electronic control for swivel and height adjustment Main saw blade and scorer can be switched on and off from the edging carriage PSV with narrow hood Miter stop Edging stop Angle stop Hold Weight approx. 1050 kg

Connected load 380V Main motor 7.5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram protection device with wide and narrow hood Scoring unit manual adjustment Electric height adjustment Electric swivel with Siko indicator Extraction connection 1x100mm 1x120mm

working width 230mm working height 120mm 5 heads Head arrangement: lower/right/left/top/universal adjustment of heads in two axes pneumatic clamps smooth feed speed control spindle diameter 40mm star/delta boot Countertop lubrication weight 2245kg Year 1997

working width 230mm working height 120mm 4 heads heads adjustable in two axes spindle diameter 40mm control of planing dimensions from the panel star/delta spindle start-up two feed gears worktop lubrication system Year of production 1998

working width 220mm working height 120mm 4 heads spindle diameter 40mm smooth feed speed control star/delta boot adjustment of heads in two axes Electric pressure beam adjustment pneumatic pulling roller clamps spindle rotation 6000 rpm grooved top

Track width 300mm cutting height 120mm maximum diameter of discs 350mm smooth feed speed control manual up/down adjustment of the pressure rollers manual shaft height adjustment motor power 25kW power supply 380V

working width 200mm motor power 18.5kW maximum element height 120mm smooth feed speed control manual adjustment of the pressure position manual dial adjustment maximum blade diameter 350mm

Track width 300mm cutting height 120mm maximum diameter of discs 350mm smooth feed speed control manual up/down adjustment of the pressure rollers manual shaft height adjustment 25kW motor power supply 380V

Track width 300mm cutting height 120mm manual up/down shaft adjustment Manual adjustment of the pressure rollers smooth feed speed control 6-45 m/min 4200 RPM maximum blade width 350 mm minimum blade width 200 mm year of production 2002

Four-sided planer SCM type SINTEX Planing width max. 180mm Planing height max. 105mm Planer heads incl. Number of spindles : 4 pcs 1. Spindle: bottom 2. Spindle : right 3. Spindle : left 4. Spindle: top High/low adjustment of the upper spindle : manual Feed speed : 6/12 m/min Very clean, neat used machine. The condition can be described as like new

I am selling a sliding table saw with SCM SI 300N scoring machine, built in 2000. Table length 3200mm. Max. cutting width a.square stop 1950 / 2850mm. Max. cutting width a.Rip fence 1270mm. Motor 5.5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main saw blade speed (scorer) 4000 (8000) rpm. Condition very good, available same. Please contact us for more photos.

trolley length 3200mm Electric disc angle adjustment electric disc height adjustment angle fence Scoring unit speed 9000 rpm per minute Right fence set to size manually Longitudinal fence with micro adjustment length of the longitudinal fence 1200mm cutting width 960mm maximum blade diameter 450mm max scoring unit diameter 120mm year of production 2004 weight 1065kg power supply 380V dimensions 355x400x140 cm

trolley length 3800mm main motor power 4 KW scoring motor power 0.75 KW Scoring unit speed 8500 rpm per minute Electric disc angle adjustment electric disc height adjustment Manually adjustable scoring cutting width 1400 mm length of the longitudinal fence 1500 mm Right fence electrically set to size from the panel maximum blade diameter 350mm max scoring unit diameter 120mm year of production 2002 weight 1035kg power supply 380V dimensions 420x410x135 cm

trolley length 2000mm Undercutter Micro adjustment of the longitudinal fence length of the longitudinal fence 1500 mm Cutting width 750 mm manual adjustment of the dial angle manual disc height adjustment maximum blade diameter 350mm disc rotation 4000 rpm Scoring unit speed 8500 rpm Year of production 1999 weight 870 kg dimensions 280x350x100 cm

Sawblade tiltable: 45 ° Length of the rolling table: 3.200 mm cutting width: 1.340 mm Motor output: 7,5 kW Cutting height: 150 mm Cutting height at 45°: 106 mm Saw blade diameter: 450 mm Speed: 2.350 - 5.200 U/min. weight of the machine ca.: ca. 1.100 kg : Variabel - Stufenlos : Elektrisch : Elektrisch : Ja : Nein The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 410 mm Length of the planing table: 2.600 mm Number of knives: 4 St. Motor output: 4 kW Dimensions (L/W/H): 2.600 x 1.400 x 1.200 mm weight of the machine ca.: 561 kg : Tersa : Ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working width: 300 mm Working height: 200 mm Motor output: 4,0 kW Length of the planing table: ca. 1.500 mm Number of knives: St. Feed speed: m/min. Dust suction hood: 120 mm Dimensions (L/W/H): mm machine weight ab.: 245 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dresser-Thickness SCM FS 520 -used-TERSA-Planer shaft, common opening dressing tables, table opening to the rear, pneumatic table opening, electric height adjustment, noise-insulated---------- Technical data ----------planing width: 530 mm, table length: 2300 mm, max. chip removal: 6 mm, number of knives: 4 pieces, passage height: 250 mm, min. workpiece thickness: 3 mm, feed speed: 5/8/12/18 m/min., motor power: 5.5 kW, weight: 980 kgQuality info: - dressing tables adjusted- Loading and

Four-way planer SCM Sintex XT - used-reversible knife system, lubricant pump, Tersa ---------- Technical data ---------- planing width: 180 mm, planing height: 105 mm, number of spindles: 4, motor spindle 1 + 4: 7.5 kW, motor spindle 2 + 3: 7.5 kW, feed speeds: 6/12 rpm, suction nozzle Ã: 150 mm, dimensions (LxWxH): 2,700 x1,000x1,700 mm, weight: 885 kg

Table milling machine SCM T130N -used-finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------table size: 1200x730 mm, work table height: 920 mm, spindle diameter: 30 mm, useful length milling spindle: 115 mm, max. cutter diameter: 250 mm, max. retractable cutter diameter: 250 mm, height adjustment: 200 mm, speeds: 3000/4500/6000/7000/10000 rpm, suction nozzle Ã: 120 mm, suction nozzle à bottom: 120 mm, dimensions (LxWxH): 1200x850x1300x mmQuality info: -

Table dimensions X/Y: 830mm/700mm, spindle diameter: 30mm, vertical stroke: 150mm, speed: 10000rpm, spindle swivel: -10°/+45°, motor power: 2.2kW, weight: approx. 240kg. On-site inspection is possible.

Max. workpiece height: 280mm, tool cone: HSK 63F, weight: 6.5t, an inspection is possible.

SCM Pratix-S 12 B CNC Machine Centres With Flat Table Find more here - / Contact us at -

CNC machining center SCM Routech R 3000 for processing plate material with automatic loading (vacuum destacker) and outlet. Special price for self-dismantling and self-collection., Workspace: 2,600 x 1,250mm, X-axis: 2.700 mm, Y axis: 1.600 mm, Z-axis: 250 mm, Spindle motor: 7,5 kW, feed: Max. 38 m/min, Video: On demand

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

Manufacturer: SCM , Year: ca.1995, Control: hand, Number of profile spindle: 1, Tracer: yes, Max. operating height mm: 50, Spindle travel range total mm: 110, Number of milling spindles: 1, Milling spindle kW: ca.1,5, Milling engine rpm: 10000/20000, Grid depth setting: yes, Tracer pin in the table: yes, Number of tables: 1, Table size in mm: 7700 X 900, FREE TEXT: Tischub per Handrad 200 mm/pneumatisch Fusspedal, Year :ca.1995

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: SCM, Type: Routomat 3 , Year: 1994, Control: scm, Work piece width min-max mm: 2500 X 1400, Working range X: 2500, Working range Y-axis: 1400, Working range Z: ca.350, C axis: yes, Work piece width min-max mm: 2500 X 1400, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, pm: 1500-18000, pm: 1500-18000, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 6, Alu-Glättisch: Alu Nuttisch, Tool clamping system: vakuum, FREE TEXT: C-Achse muss überholt werden Preis ca.3000 Euro, Year :1994

Manufacturer: SCM, Type: P64, Year: 1988, Planing widht mm: 180, Planing hight mm: 105, Number of spindles: 4, Rotations of spindles max. rpm: 6000, Separate engine per spindle: no, Main engine kW: 4, Fully suspended drive feeding: yes, Feeding - kW: 2,5, Feeding speed continous adjustable: yes, Tischlänge mm: 2000, Adjustment - electonically: no, Noise enclosure: yes, Compressed air bar: yes, Wight approx. kg: 2000, Year :1988

Manufacturer: SCM, Type: M 3, Year: 2001, Cutting widht mm: 300, Working hight mm: 120, Power engine kW: 44, Year :1993

This SCM Olimpic K800 edgebander was manufactured in 2011. Ideal for precise edge finishing, it supports a variety of banding materials. Durable and reliable, its a great addition to any woodworking shop. Contact us for more information.

This SCM Stefani MD RM edgebander was manufactured in 2023. It features adjustable chain feed speeds of 10-22 m/min and handles edge thicknesses up to 15 mm. Equipped with a pre-milling unit, glue unit with quick-change capabilities, and a cutting unit for precise edge finishing. The Maestro active edge control system enhances user interaction for optimal performance. If you are looking to get high-quality edgebanding capabilities consider the SCM Stefani MD RM machine we have for sale. Contact us for more information.

This SCM OLIMPIC K 560 edgebander was manufactured in 2015. Designed for efficient edge banding, its a robust choice for woodworking professionals. Consider the opportunity to buy this SCM OLIMPIC K 560 edgebander. Contact us for more information.

This SCM SIGMA PRIMA 67 panel saw was manufactured in 2017. Ideal for precise wood panel cutting, it offers reliable performance for your woodworking projects. Consider the opportunity to buy this SCM SIGMA PRIMA 67 panel saw. Contact us for more information.

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical spîndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control