used Retail scales for sale

ACCUTEX GA 43AL wire EDM machine was built in 2018 in Taiwan. This highly efficient and reliable machine can achieve complex and difficult shapes, making it ideal for the production of precision tools, dies and punches. The traditional drive has been replaced by a direct, closed-loop linear drive system to eliminate backlash and increase cutting capacity by up to 10%, with much lower energy consumption and constant operating temperature. The GA 43AL EDM machine features a state-of-the-art AccuteX CNC control based on a Windows system with touchscreen and compatibility with CAD/CAM software. The controller optimises the machining parameters according to different wire diameters, corner angles, arc radius and workpiece thickness for the best cutting efficiency and accuracy. The wire EDM machine weighs 2800 kg. Technical data of the ACCUTEX GA 43AL wire EDM machine - CNC control: Acc ...

Allscales platform scales Model: ISC-V stainless platform scale, platform 500mm x 500mm, 400g - 60Kgs, e = 20g, 1Ph

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

Autopack two station vibratory weigher Stainless twin lane weigher, 100Kg hopper onto two vibratory conveyors, then discharges on two platform scales, 250g - 12Kg, with foot pedals, 1Ph

Code: 0001 Brand: DAN - LIST - DENMARK Model: MORSO Pedal-operated guillotine saw for 45° cutting of both sides of frames Technical data: Max width of the rod to be cut cm 10 Max height of the rod cm 16 Length of the right supporting table cm 80 Pair of steel blades Height of support surface from ground cm 83 Measuring system with 3 millimetre scales Overall dimensions of assembled machine mm 1750 x 550 x 950 h Overall dimensions for transport mm 650 x 550 x 950 h Weight kg 90

DECKEL MAHO DMF 220 Linear Control system: SINUMERIK 840D with ShopMill interface Year of manufacture: 2002 X-axis travel: 2200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Worktable dimensions: 2600 x 600 mm Maximum table load: 2200 kg Power: 35 kW, equipped with SK 40 spindle taper Chip conveyor Heidenhain linear scales on all axes Coolant filtration station (900 liters) Through-spindle coolant supply Air conditioning for the electrical cabinet

3000kg capacity scales unused - unwrapped for photo purposes

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1,500 x 1,250 mm. Max weight allowed on table 4,000 kg. Table turning range (C Axis) 0.001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1,600 mm. Cross travel (Y Axis) 1,250 mm Vertical travel (Z Axis) 1,000 mm. Horizontal/Vertical Auto Indexing Head (A Axis) 0.001º (Continuous) Rapid Traverse 60,000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18,000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precis ...

Manufacturer DMG Model DMU 160P Year 2002 CNC HEIDENHAIN iTNC-530 Table Table surface 1.500 x 1.250 mm. Max weight allowed on table 4.000 kg. Table turning range (C Axis) 0.001 º (Continuo) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Horizontal / Vertical Auto Indexing Head (A Axis) 0,001 º (Continuo) Rapid Traverse 60.000 mm/min Spindle taper SK-40 DIN 69871 Spindle speed 20-18.000 rpm Main spindle power 28 kW Equipment Automatic tool changer INCLUDED ATC positions 60 Coolant deposit capacity 200 l. HEIDENHAIN optical scales INCLUDED Chip conveyor INCLUDED Portable handwheel HEIDENHAIN HR-410 3D-Rot INCLUDED Tool touch probe INCLUDED M-function for internal / external lubricant INCLUDED Ready for internal coolant INCLUDED Mode 4 operation INCLUDED Others Positioning precisi ...

DMG MORI SEIKI NHX4000 CNC machining center made in 2014 in Germany is an ideal combination of functionality, productivity and precision that can handle even the most complex challenges in a wide range of industries. This technologically advanced machine consists of a single-piece bed with sliding column, reliable components and extensive optional equipment. The machining process takes place inside a large work area, which includes an extremely powerful high-speed spindle, a 4-axis rotary table and a two-pallet system. This system allows uninterrupted machining of multiple workpieces, thus significantly increasing production efficiency and reducing machine downtime to a minimum. In addition, all basic machine components are cooled to increase their service life. The DMG MORI SEIKI horizontal machining center is equipped with optional equipment, including measuring probes, tooling and  ...

Machining center bridge-type 5-axis FAMU Active Five 2000 Make: FAMU Model: Active Five 2000 YEAR 2008 X-AXIS TRAVEL 2000 mm Y-AXIS TRAVEL 1800 mm Z-AXIS TRAVEL 850 mm RAPID FEEDS X-Y-Z 30 m/min SPINDLE 0 – 22000 rpm; 30 kW; HSK A63 TABLE SIZE 2100 x 1000 mm MAX ADMITTED LOAD 3000 Kg HIGH PRESSURE COOLANT 50 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS CONTROL UNIT HEIDENHAIN iTNC 530 WEIGHT 19500 Kg OVERALL DIMENSIONS 5850 x 3880 x 3860 mm ACCESSORIES PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LINEAR SCALES NOTE TOTAL RETROFIT ON CONTINUOUS POSITIONING A and B-AXIS HEAD AND ON ELECTRO SPINDLE (YEAR 2021)

Slicer: Manufacturer: GEA/CFS Type: Mega Slicer YOM: 2005 Capacity: ~2,000 slices/min GEA/CFS Scales Shingle Loader Manufacturer: GEA/CFS Type: Single Loader YOM: 2005 Thermoforming Machine Manufacturer: GEA/CFS Type: Powerpak 620 YOM: 2005 Format: 400g and 1000g Condition: not operational, slicer scales needs to be repaired or replaced

GF Mikron E 500 U 5-Axis CNC Vertical Machining Center Year: 2018 SPECIFICATIONS: X-AXIS 19.69 Y-AXIS 17.72 Z-AXIS 15.75 # AXIS 5 SPINDLE SPEED 12,000 RPM ATC CAPACITY 30 TAPER BT 40 EQUIPPED WITH: 1k cutting hours Heidenhain iTNC 530 CNC Control Renishaw TS-27R Probe Touch Probe Infrared OMP40 Assortment of Tooling Tool Magazine DT40/BT40 & ISO4 TC Arm Holder For ISO 40 Kinematicsopt (2) Compressed Air Through Spindle Compressed Ball 30 with Base Hem Rotary Tilting Table Hem Linear Glass Scales 500U Conveyor Lift Up Chip Movable Hand Wheel Manual Touch Cycles Heidenhain Manual Pilot Smart NC Heidenhain Manual DIN/ISO Programming Heidenhain

WE OFFER TWO HERMLE MACHINES COMPLETE SAME CONFIGURATION Both machines Year 2007 and same fully Equipment inside ! First Machine new Spindle 10/2023 Second Machine new Spindle 04/2024 INCLUDED COMPLETE TOOLINGS 30 TOOL HOLDERS EACH MACHINE The machines have been continuously serviced by Hermle and are in a ready-to-use condition. Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 450 mm Controller manufacturer: Heidenhain Controller model: iTNC530 Operating hours of spindle: 21,000 h Coolant supply: 80 bar Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable Travel paths: X: 600mm Y: 450mm Z: 450mm C: 360 degrees A: +/-115 degrees Equipment: Control: Heidenhain iTNC 530 Spindle speed: 18000 rpm Spindle mo ...

Hethon Mixing system 2018, Micro ingredients mixing system, made up of 3x Hethon feeders mounted on individual scales, discharging into 25Kg sacks,

Hethon Mixing system 2016, Micro ingredients mixing system, made up of 5x Hethon feeders mounted on individual scales, discharging into 25Kg sacks

Manufacturer JOHNFORD Model BMC-110 Year 2012 CNC FAGOR 8055-MC Table Table Surface 1.400 x 1.600 mm. Table max load capacity 12.000 kg. Table Rotation (B Axis) Continuous (0.001º) Travels and feeds X axis – longitudinal travel 2.000 mm. W axis – Quill travel 550 mm. Y axis – vertical travel 1.800 mm. Z axis – cross travel 1.600 mm. Spindle nose to table center 550-2.150 mm. Spindle center to table top 0-1.800 mm. Controlled Axis X, Y, Z, W, B X/Y/Z rapid feed 12.000 mm/min W rapid feed 6.000 mm/min Cutting feed axis X/Y/Z/W 1-6.000 mm/min Table revolution – B axis 4 rpm Boring spindle Boring spindle diameter 110 mm. Speed Ranges 2 Turning Speeds 0-3.000 rpm Spindle power 22/25 kW Automatic tool changer Tool selection Bidirectiona Random shortest path Tool magazine capacity 60 Max tool diameter 125 mm. Max tool length 400 mm. Max tool  ...

Technical Features of this Boring Machine Manufacturer JOHNFORD Model BMC-110 Year 2012 CNC FAGOR 8055-MC Table Table Surface 1.400 x 1.600 mm. Table max load capacity 12.000 kg. Table Rotation (B Axis) Continuous (0.001º) Travels and feeds X axis – longitudinal travel 2.000 mm. W axis – Quill travel 550 mm. Y axis – vertical travel 1.800 mm. Z axis – cross travel 1.600 mm. Spindle nose to table center 550-2.150 mm. Spindle center to table top 0-1.800 mm. Controlled Axis X, Y, Z, W, B X/Y/Z rapid feed 12.000 mm/min W rapid feed 6.000 mm/min Cutting feed axis X/Y/Z/W 1-6.000 mm/min Table revolution – B axis 4 rpm Boring spindle Boring spindle diameter 110 mm. Speed Ranges 2 Turning Speeds 0-3.000 rpm Spindle power 22/25 kW Automatic tool changer Tool selection Bidirectiona Random shortest path Tool magazine capacity 60 Max tool diameter 125 mm.  ...

KIMLA POWERCUT LF 1530 fiber laser was built in 2021. The reliable machine, built on a rigid monolithic body, uses advanced fibre technology to cut workpieces with a maximum weight of 900 kg. The 4 kW high-quality fibre optic beam fed directly to the cutting head expands the machining possibilities and guarantees the user very smooth and even edges. The high-quality steel work table with precise mechanical locking stiffens the pallet during cutting, ensuring that the workpiece remains stationary and secure while cutting in the X, Y and Z axes. In order to ensure that the cutting process is uninterrupted, the KIMLA laser cutting machine is also equipped with an automatic pallet changing system which allows workpieces to be loaded and unloaded at the same time, without interrupting the production process. The POWERCUT LF 1530 fibre laser cutting machine is operated via an interactive ...

<br>Gathering machine Clamping element with manual installation 20 stations TO 803 20 Controls Wrong &amp; double sheet control Intermediate modules Installation element Hand system Adhesive Binder 20 pliers Vibration station Peace table Folding Anpre station S-FR and roughened station Popular B Hotmelt R ckenleimwerk Squeegee control Hotmelt side glue works Premelter Gauze station Scales cover feeder Groove Station 2 to 6 times Handling pressure Niederlegevorrichtung<br><br>Still in operation: No.<br>Available: immediately

Mario Carnaghi CNC Vertical Boring Mill FEATURES: Siemens 840DE SL CNC Control 12-Position Automatic Tool & Attachment Changer 40-Station Automatic Tool Magazine Hydrostatic Table Vertical Ram with Milling Spindle Vertical Milling & Drilling Attachment Right Angle Milling Attachment Universal Milling Attachment Through Spindle Coolant & Flood Coolant Dual Dive 108 HP (81 KW) Table Motors High Resolution Heidenhain Scales & Encoder Renishaw RMP 60 Probe Renishaw NC-4 Milling Tool Probe Full Machine & Operator Enclosure Chip Conveyor CAPACITY: Table Diameter 196.85 (5000mm) Turning Diameter .. 236.22 (6000mm) Maximum Turning Height 98.42 (2500mm) Maximum Stroke of Vertical Rams ... 59.05 (1500mm) Ram Cross Section . 13.77 x 13.77 (350x350mm) Cross Rail Travel . 47.24 (1200mm) Ram Saddle Travel, X-Axis . 175 (4445mm) Turning Tool .. Capto C8 T ...

he Promag/Mark Mixmatic 110 is an industrial-grade ice cream batch pasteuriser designed for medium- to large-scale dairy and dessert production. Manufactured in Italy, it offers efficient and hygienic processing of ice cream mixes, ensuring consistent quality and safety.​ Key Specifications Load Capacity: 40–110 litres per cycle Refrigerant: R22 (6.5 kg) Cooling System: Water-cooled Power Requirements: 4.4 kW, 415V, 50Hz, 3-phase Construction: Stainless steel with overhead top-mounted agitator Dimensions: 81 cm (L) × 68 cm (W) × 116 cm (H) Weight: 190 kg​ ⚙️ Features & Benefits Efficient Pasteurisation: Capable of processing batches between 40 and 110 litres, suitable for various production scales. Durable Construction: Stainless steel build ensures hygiene and longevity. Effective Mixing: Top-mounted agitator provides thorough mixing for unif ...

Year : 2014 CNC Siemens 840D Swing over bed 1030 mm Maximum turning diameter 690 mm Turning length 1 693 mm Y-axis 370 mm Spindle bore 106 mm Bar capacity through draw tube 94 mm Spindle speed 3 500 rpm Spindlemotor S1/S6 40¤ AD 59/74 kW Milling spindle 12000 rpm Milling spindle power S6 40% AD 22 kW Milling spindle taper CAPTO C6 B-axis -120º, + 105º ATC magazine with 81 positions Linear scales in X,Z,Y Tailstock MK6, travel 180 mm Machine dimensions L W H 5,4 x 3,86 x 3,76m Machine weight 22 800 kg

METTLER TOLEDO CHECK WEIGHER Usable aperture size 400mm (wide) x 120mm (high) 300mm wide conveyor belt Scales length 530mm Full length 1750mm Line height 980mm Auto push reject Full supermarket spec Left to right production direction

Used automatic scales from Mettler-Toledo Garvens type XS3. New 2012. Automatic scale for single load checking. Technical data: - Max. belt speed: 60 m/min, - Throughput: 250 pcs/min, - Product weight: max. 1500 g - min. 7 g, - Air supply Min. 500 kPh, - Operating temperature range: 0 C° / +40 C°, - Power supply 100 - 240 V~ / 50-60 Hz.

BKOZ 900x1400 spindle taper MK IV sleeve stroke 250mm table size 900x1400mm longitudinal 1000mm cross 750mm vertical movement by the head of main spindle 600mm spindle speeds 28-1400 Upm spindle feeds 0,02-0,8mm/U scales wreaths for all directions of motion hydr. clamping system coolant system sep. control cabinet Motor: 230/380V 50HZ 8KW dimensions base: 3.300 x 2.400mm height: 2.500mm weight: 7.500 kg

5-Axis CNC High Gantry (Top Gantry) Type Milling Machine Manufacturer Forest Liné Model Minumac TH linear Year 2000 Control Siemens Sinumerik 840D Table size 6000 x 3000 mm Table load limited by foundation Distance between the columns Distance spindle to table Travels Top gantry longitudinal X 7000 mm Milling saddle cross Y 4000 mm Z 1500mm Feeds X/Y/Z 0 ~ 20000 mm/min. C,B 0 ~ 10 rpm Rapids X/Y/Z 40000 mm/min. C,B 10 rpm Spindle I Electro Spindle Fischer MFWS 2603/18 W VCS Spindle drive motor rating 18/24 KW Spindle speed max. 18000 rpm Spindle torque max. 163 Nm Spindle changer Automatic Spindle taper HSK-A63 Spindle II Electro Spindle Fischer MFWS 1709/30/33 HF Spindle motor rating 20/22 KW Spindle speed max. 30 000 rpm Spindle torque max. 23 Nm Spindle changer Automatic Spindle taper HS ...

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Mobile u scales for fine weighing Model UV 2000 Weighing capacity 2000 kg Accuracy in +/-2 kg Number of sensors 4 pcs. Height 120 mm Weight 38 kg Made in Denmark

CNC Floor Type Boring & Milling Machine   PAMA Speedram 1000   Manufactured new in 2008 - with only 4500 program run hours   Heidenhain iTNC 530 CNC Control   X 13000 mm   Y 3000 mm   Z 1000 mm   W 700 mm   Pama NC-Rotary travelling table   Table size 2000 x 2200 mm   Table load 16 t   B-Axis 360°/0.001° with contour milling capability   V-Axis table travel 2000 mm   Boring spindle diameter 150 mm   Spindle taper ISO 50   Spindle drive 37 KW   Spindle speeds to 3500 rpm   Floor plates   Huron type universal head   X,Y,Z hydrostatics   Optical scales X,Y,Z,V Axes   Linear magnetic scale W Axis   Coolant through the spindle 30 bar with filtration unit   Automatic attachment clamping on the ram   PREPARED for ATC   Excellent machine condition - Under power - Immediately available

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

CNC controller: Heidenhaim TNC-530 Axes X-axis travel mm: 2.000 Y-axis travel mm: 1.000 Z-axis travel mm: 800 Rapid traverse m/min: 25 Worktable Table dimensions mm: 2.000 x 800 Max. workpiece weight kg: 4.000 Milling Head Automatic milling head: 90º/45º, 2,5ºx2,5º Spindle Taper: ISO 50 Spindle Spindle speed rpm: 10-4.000 Spindle drive power kW: 22 (100% ED) Cooling Cooling through the Spindle Center bar: 8/10 Tool system Tool holder: ATC Tool magazine slots: 20 Equipment Electronic Handwheel Spindle active cooling unit Linear scales Machine running times Under power: 60.051 Spindle Working: 20.166 Basic machine dimensions / weight Length mm: 7.700 Width mm: 3.600 Height mm: 2.900 Weight kg: 11.000

Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request

ID2809 Teka Mixomat 3000 year/Year of construction 1999 Semi-mobile concrete mixing plant, 80 cbm/h, high-performance compulsory mixer THZ3000 (3000 litres), insulated housing, row dispensers, binder scales, water scale, dust extraction, silos (4 x 35 cbm, 1 x 28 cbm), Pikotomatik control renewed in 2019, automatic high-pressure cleaning for mixers, optional with electric aggregate Semi-mobile concrete batching plant, 80 cbm/h, high-performance forced action mixer THZ3000 (3000 litres), enclosure insulated, in-line feeders, binder scale, spirit level, dust removal, silos (4 x 35 cbm, 1 x 28 cbm), control picomatics renewed in 2019, automatic high-pressure cleaning for mixers, optionally with power generator

Craft of restaurant brewery: ready-made kit with turnkey installation, including commissioning, staff training and 3 beer recipes. For the production of any type of beer - both bottom and top fermentation. Equipment material: stainless steel DIN 1.4301 / AISI 304 • any type of beer can be brewed (lagers, ales, wheat, etc.) • the infusion or decoction brewing method is based on the original Austrian calandria technology: easily controlled and automatically controlled heating occurs without direct contact of the heating elements with the raw materials, and without the use of steam • the brewer can program many automatic processes independently • the volume of one brew can be increased to 2 x 1000 = 2000 l by installing a second brew kettle • automation: after the start, brewing can occur without the presence of a brewer, which is especially convenient in the case of nigh ...

The CONTIMOL is the continuous sugar dissolver to produce sugar syrup (simple syrup) with constant quality and concentration. The unit can be customized to individual needs regarding potential product output and based on usage and availability of energy. Module Features • High degree of automation • Jet-Mix-System • Short start-up phase • Existing CIP integration • Manufactured using high quality material The unit includes: -Mixing station on the frame; -Control cabinet; -Power cabinet; -Vertical bunker for sugar 5.000l. with scales; -A set of augers for feeding sugar into the dissolving unit;

Carrot processing machines for black carrots etc. till storage bunkers Pos. 1.42 /max. 20 t/h / 2017 Carrot unloading station Pos. 2.43 Dry soil remover Pos. 3.44 Weed and gras remover Pos. 4.45 Cyclone stone separator Pos. 5.46 Water bath with conveyor to Pos. 6.47 Pos. 6.47 Washing machine with conveyor to Pos. 7.48 Pos. 7.48 Sorting conveyor belt with rejection conveyor belt for rejected vegetables Pos. 8.50 Conveyors with scales till Pos. 9.51 Pos. 9.51 2 x storage bunker, capacity: 2 x 25 tons, (with conveyors to Pos. 52) Further machines for the production of carrot juice concentrate are available used, sold as it is, where it is, price ex location

Carrot processing machines for black carrots etc. Pos. 1.42 /max. 20 t/h / 2017 Carrot unloading station Pos. 2.43 Dry soil remover Pos. 3.44 Weed and gras remover Pos. 4.45 Cyclone stone separator Pos. 5.46 Water bath with conveyor to Pos. 6.47 Pos. 6.47 Washing machine with conveyor to Pos. 7.48 Pos. 7.48 Sorting conveyor belt with rejection conveyor belt for rejected vegetables Pos. 8.50 Conveyors with scales till Pos. 9.51 Pos. 9.51 2 x storage bunker, capacity: 2 x 25 tons, Pos. 21.49 sormac /-/-/ 2018 Vegetable head cutter for example for carrots with infeed unit and outfeed conveyor Pos. 10.52 FOOD-TECH / 86/ 2016 Vegetable rotation washing machine Pos. 11.56 PKC/ 2000 Steam peeler for vegetables with steam buffer used, sold as it is, where it is, price ex location Pos. 12.63 FOOD-TECH/ 95/ -/2017 Vegetable washing mac ...

VISION WIDE VB-2016 5-AXIS CNC gantry milling machine was manufactured in 2013 in Taiwan. The machine performs precision machining of heavy workpieces in three or even five axes, once the automatic swivel head is mounted to the vertical spindle. The machine’s top-quality cast-iron structure is rigid and resistant to bending stress, thus perfectly dampening the vibrations and oscillations generated during machining. The VISION WIDE VTEC VB 2016 CNC gantry milling machine centre is equipped with safety guards fitted around the entire machine with sliding doors that open flush with the X-axis travel. Inside, there is a large work table with a length of 2000 mm and a width of 1300 mm, which is supported along the entire length of the longitudinal travel and guided by two sliding guideways, making it possible to machine heavy workpieces even when the table is unevenly loaded. Two scre ...

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...