used Rotating drilling millers for sale

• Cutting Bridge 1 – 3x Oxy head (one broken) + 1 x 200Amp Plasma: o Year 2006 o Working area: 24m x 3150mm o Working condition • Cutting Bridge 2 – 1x Plasma Bevel Cut 360 Amp + 1x Drilling Unit with automatic lubrification o Year 2014 o Working area 30m x 3150mm o Good Condition • 2x Donaldson Aspiration Unit • 50m rails + cutting table

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 2 - 22 mmMax. drill depth: 120 mmTable length: 500 mmTable width: 400 mmSpindle speeds:steplessfrom: 50 rpmup to: 4000 rpmPower: 1.5 HPMachine´s weight about: 150 kgOverall dimensions machine:Length: 400 mmWidth: 500 mmHeight: 1000 mm

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 13 mmTable length: 400 mmTable width: 350 mmDepth of throat: 200 mmSpindle stroke: 120 mmSpindle speeds:number (steps): 10 from: 350 rpmup to: 5000 rpmmin.: 30 mmmax: 330 mmVoltage 50 Hz 3x: 380 VoltPower: 1.00 HPMachine´s weight about: 260 kgOverall dimensions machine:Length: 800 mmWidth: 550 mmHeight: 600 mm

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataDrill capacity in steel: 6 mmTable length: 310 mmTable width: 280 mmDepth of throat: 150 mmSpindle stroke: 50 mmSpindle speeds:number (steps): 8 from: 650 rpmup to: 12000 rpmVoltage 50 Hz 3x: 380 VoltPower: 0.30 HPMachine´s weight about: 50 kgOverall dimensions machine:Length: 600 mmWidth: 350 mmHeight: 650 mmVarious accessories:Drill chuck: 0 - 6.5 mmLamp

Drilling capacity: 0 mmNumber of drilling units: 0  Spindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataNumber of drill-heads: 3 Drill capacity: 6 mmDrill depth (spindle stroke): 50 mmTable length: 820 mmTable width: 180 mmTaper in spindleDepth of throat: 150 mmSpindle speeds:number (steps): 6 from: 325 rpmup to: 6000 rpmVoltage 50 Hz 3x: 380 VoltMachine´s weight about: 100 kgVarious accessories:Threading attachment: 3 Coolant systemDrill chuck: 3

Drilling capacity: 0 mmThroat: 0 mmSpindle taper: 0  CNC Brand: 0CNC Model: 0 Control: GE MARK CENTURY ONE PLUSTechnical datanumber of toolsDrill capacity in steel: 23 mmSpindle speeds :steps: 9 from: 42 rpmup to: 3500 rpmTable length: 820 mmTable width: 400 mmLongitudinal travel: 400 mmTransversal travel: 320 mmVertical travel: 470 mmFeeds: 1000 mm/minRapid traverse:: 3.5 m/minVoltage 50 Hz 3x: 380 VoltPower: 2.5 kW

ID3265 Adler B50 year/Year of construction 2020 approx. 1500 hours/ hours 3.1 t Well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5 t, standpipe with auger for pre-drilling, 110 m flushing drill pipe on steel pallet, complete maintenance was carried out at the end of 23. The machine was fitted with a new drill head from Eurodrill at the end of 2013 for approx. 20,000 euros. Water well drilling rig (well construction and geothermal energy up to 100 m), with trailer for drilling rig up to 3.5t, standpipe with auger for pre-drilling, 110 m directional drill pipe on steel pallet, complete maintenance was carried out at the end of 23. At the end of 23, the machine received a new drill head from Eurodrill for about 20,000 euros.

Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Drilling capacity: 40 mmThroat: 870 mmSpindle taper: 0   SPECIFICATIONS Drilling capacity steel Ø  35 mm Drilling capacity cast iron Ø  40 mm Tapping MM 25 Spindle taper Mk  Mk 4 Spindle diameter Ø   60 mm Spindle travel  180 mm Max. distance spindle - table  80 mm Min. distance spindle - table   870 mm Floor / table area    700 x 600 mm Power2.2 kW Spindle speeds / ranges 65 - 1750 VARIO Rpm DIMENSIONS Length  1200 mm Width  800 mm Height 2400 mm  

Column Drilling Machine ALZMETALL NOLL Spindle: CM3 Spindle exit: 160 mm Table size: 500 x 400 mm Maxi distance spindle nose/table: 600 mm Throat depth: 290 mm Splindle speed by belt variator Spindle motor: 1,3 kW Manual descent 2 speed ranges Superior protection cover is missing Voltage: 380 V Width: 700 mm Depth: 900 mm Total height: 1900 mm Weight: approx 600 kg

Drilling capacity: 80 mmRadius: 2781 mmSpindle taper: 76  

Drilling capacity: 80 mmRadius: 2781 mmSpindle taper: 76  

ID3073 Atlas 1304 with Botec-Scheitza drill rig year/Year of construction 1990 13630 hours/hours 17 t Mobile excavator Atlas 1304 with Botec-Scheitza drilling mount for auger and down-hole hammer drilling (max. diameter 130 mm), without impact mechanism Atlas 1304 wheeled excavator with Botec-Scheitza drill rig for auger and down-the-hole hammer drilling (max. diameter 130 mm), without impact mechanism

ID2932 Atlas Copco ROC L6-44 year/Year of construction 2007 approx. 11860 hours/hours 21 t Blast hole drill, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, many accessories optionally available (drilling tube 89 x 5000 mm, Mincon 3.5 MP35 down-the-hole hammer, ballistic drill bit D105 etc.), optionally with spare parts dispenser machine ( Engine damage), year of construction 2001 Blast hole drilling rig, 11860 operating hours, 5420 compressor hours, working pressure 25 bar, CAT motor, optionally many accessories available (drill pipe 89 x 5000 mm, down-the-hole hammer Mincon 3.5 MP35, drill bit D105 ballistic etc.), optionally with spare parts dispenser machine (engine damage), year of construction 2001

AUERBACH AX3 TLF deep hole drilling machine was manufactured by the renowned German company Erste Maschinen Fabrik (ERMAFA Sondermaschinen- und Anlagenbau GmbH) in 2011. Characterised by its high reliability and performance, the AUERBACH AX-3 TLF machine used in the drilling of deep holes with high precision and tolerances in various types of metal, provides excellent optimisation of all aspects of the process and a significant reduction in cycle times. The machining process is fully automatic in 6 axes (X, Z, W, Y, B, A), making it capable of obtaining holes with a maximum diameter of 32 mm and a depth of up to 1700 mm. The AUERBACH AX 3 TLF deep hole machining centre is equipped with, among others, a 1500 x 100 mm interpolated rotary table and a user-friendly HEIDENHAIN iTNC 530 CNC control for programming all parameters of the process. The total weight of the drilling and milling m ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

Code: 0314 Brand: B.T. TAMBONE - ITALY Model: FB-200 - CE Standard Hardware assembly bench, for wood windows , pvc, aluminium - CE Standard Technical data: Work table size mm 3000 x 1000 Work table height mm 1000 Max hardware length mm 2550 Min hardware length mm 300 Drilling unit with 3 spindles - Motor Kw 0,55 - Rpm 3000 - Tool attachment diameter mm 10 - N° 4 adjustable drilling depths Shear for cutting hardware Workpiece dimensions that can be machined: max outside sash for centring 3000 x 3000 and min outside sash for centring 320 x 320 Automatic screwing unit with clutch motor and device to stop rotation at the end of screwing - N° 4 different working positions in height Work that can be carried out: The following operations can be performed on the hardware assembly bench: sash centring to determine the length of the hardware - horizontal drilling to obtain t ...

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Double-sided double-spindle drilling and grooving machine Balestrini Pragma Top Characteristic Overall dimensions, mm - 1600х1600х1300 Power, kW - 4,5 Machine weight, kg - 1500 Drill diameter, mm - 16 Table height, mm - 950 Distance from the table to the spindle, mm - 100 Clamp - pneumatic

AUTOMATIC CUTTING , BORING and MOULDING machine model BALESTRINI FTA machine for joining parts of chairs, living rooms, furniture, etc. the FTA machine is made up of 3 automatic operating units : 1st unit : circular saw for cutting workpieces to length 2nd unit : spindle moulder for milling with hydraulic sliding carriage 3rd unit : drilling unit with multiple center distance head . there are 9 work programs that can be selected and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 . hydraulic sliding carriage - Boring unit . engine power Hp 3 . max. depth drilling mm. ...

AUTOMATIC END CUTT OFF and BORING MACHINE Type BALESTRINI I2F machine for chairs composed by 3 working units : - circular saw diam. mm.350 motor power hp 3 - boring unit boring head with 5/7 mandrins motor power Hp 3 max. working stroke of boring unit mm. 130 - vertical spindle for moulder motor power Hp 5,5 spindle diam. mm.30 pneumatic sliding carriage machine composed by 3 working units : 1) circular saw for cutting to length of pieces 2) boring unit equipped with multi bit drilling head 3) vertical spindle for moulding the machine may be used for a variery of job requirements , including the end cutting off , moulding curved surfaces and boring end cutting , or end cutting off amd moulding for finger jointing , or end cutting , etc.

BALESTRINI TEAM automatic CUTTING , END MILLING and DRILLING MACHINE machine for joining parts of chairs, living rooms, furniture, etc. the TEAM machine is made up of 3 operating units: 1st unit: circular saw for cutting workpieces to length 2nd unit: spindle moulder for milling 3rd unit: drilling unit with multiple center distance head . there are 9 work programs that can be choiceed and they consist of the possible combinations of use of the 3 operating units. only 2 can be used , or 1 , or even the 3 operating units can work in different sequences . all units are operated by a hydraulic pump to obtain adjustable and smooth movements Technical data : - Cutting unit (circular saw) diam.mm.400. engine power Hp 3 - Moulding unit (spindle moulder) shaft diameter mm.30 . motor power Hp 5.5 max. tool dimensions mm.160, H=mm.120 - Boring unit . engine power Hp 3 . max.  ...

Brand: Bavelloni Type: Drilling machine Model: Trapano VT Construction year: 1992

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T

SECOND-HAND WORKING CENTER 4 AXIS BIESSE MOD. 37 XL - working dimension X 6000 - work dimension Y 1850 - work dimension Z 180 - 1 router - power router Kw 12 - C axis interpolating - tool clamping system HSK F63 - tool changing positions 21 - vertical drilling spindles 20 - horizontal drilling spindles X 6 - horizontal drilling spindles Y 2 - pod and rail table - n. 10 consoles - vacuump pump 250 m3/h - ATS - CE RULES (YEAR 2004)

SECOND-HAND CNC WORKING CENTER 4 AXIS BIESSE MOD. ROVER 24 S 6.5 - Working dimensions: X = 3000mm ; Y = 1350mm ; Z = 155mm - Tool changer 9 slots - ISO 30 - Drilling head 16 spindles - Saw blade group - Axe C - Vacuum pump Becker 100 mc/h - N. 6 working consoles - 7.5 bars - CE (year 2001)

Control NC400 Plus Travel length min/max 205/3.200 mm Travel width min/max 120/1.200 mm Drilling area in Y 120/608 mm

ID3518 Bomag B200 on Iveco truck - Well drill / well drill year/Baujahr 1985 approx. 35,000 km Bomag B200 drilling rig (built in 1985), mounted on an Iveco truck (all-wheel drive), with a 100 mm rotary head and a 120 m cable, drilling depths of up to 245 m (250-300 mm diameter), 2 Caprari pumps (type MEC-100), with approximately 90 m of drill rods (114 mm diameter) Bomag B200 (built in 1985), on truck Iveco (all-wheel drive), rotary head 100 mm passage, rope head 120 m rope, drilled to 245 m depth - 250-300 mm diameter, 2 Caprari pumps (type MEC-100), with approx. 90 m drill pipe (114 mm diameter)

Code: 0785 Brand: BUSELLATO Model: JET 6000 XL - CE Standard CNC Boring Milling Centre with 4 controlled axis for drilling, milling, contouring, cutting work on wooden elements, panels, Mdf, veneers, composite materials - CE Standard Machine structure composed of an electro-welded, standardised steel grid Technical data Working range mm 4600 x 1700 Useful passage mm 200 Useful X-axis stroke mm 5400 Useful Y-axis stroke mm 1833 Useful Z-axis stroke mm 400 X-axis speed 115 mt/min Y-axis speed 100 mt/min Z axis speed 30 mt/min N° 4 working ranges in X-axis with double 0 rows 8-position tool changer Composition: Boring head: X-axis vertical spindles 14 Y-axis vertical spindles 12 X-axis horizontal spindles 4 Y-axis horizontal spindles 8 Motor KW 2,2 - Rpm 3000/3500 Electrospindle Hp 9,5 - Rpm 24000 - ISO 30 coupling 1° Indexed circular saw unit X-Y - Ma ...

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Surplus/Never used, Caterpillar 3512C, Land Drill Module 1045 kW Prime Power, 600v, 1200 RPM, 0.733 P.F. with Jacket Water Heater, Air Cleaners, Radiator 46/CVS, 12 Spark Arrester Muffler, EMCP Control Panel, Simplex Oil Filter, designed for Petro Drilling applications, zero hours, year 2015.

For 3512C engines Make: Caterpillar Model: SR5 Mfg year: 2016 Condition: New / Unused Qty: 4 Rated Power: 2125 kVA Rated Voltage: 690 V Rated Frequency: 60 Hz Made in USA Contact us at infoheeyas.co.uk #caterpillar #engine #generator #alternator #new #power #energy #3512C #oil #gas #drilling #ship #vessel

Tapping capacity: 60 mmDrilling capacity: 0 mmThroat: 0 mmTapping depth: 0 mm Tapping up to M 6 Table 1650 x 605 + extra tilting 305 x 605 Inclinable 0 - 90 Gr . Workingh area 0 - 1500 mm  

Tapping capacity: 60 mmDrilling capacity: 0 mmThroat: 0 mmTapping depth: 0 mm Tapping up to M 6 Table 1650 x 605 + extra tilting 305 x 605 Inclinable 0 - 90 Gr . Workingh area 0 - 1500 mm  

Machine Details Stock-No. 1105-03698 Type of machine Machining Center - Vertical Make CHIRON Type FZ 15 W HI SPEED Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin france Delivery time ready for delivery Freight basis EX WORK Price Technical details X-Travel 550 mm Y-Travel 400 mm Z-Travel 425 mm control SIEMENS 840 D table surface area 600 X 350 mm tool taper ISO SK 40 spindle turning speed - stepless 20 - 12,000 rpm Feed Stepless 0 - 60,000 mm/min Rapid Traverse 60 m/min feed force X/Y axis 5.000 N feed force Z axis 10.000 N Tool Magazine: 20 diameter of tools max. 65 mm tool diameter with 2 vacant positions 150 mm Tool length - max. 220 mm Spindle diameter in front bearing 70 mm max. torque on the spindle max. 180 Nm Distance between table/spindle 280 - 705 mm distance between spindle/column 480 mm Milling capaci ...

Technical dataMin. drill capacity: 2.0 mmMax. drill capacity: 32.0 mmSpitzwinkel min.: 60 °max.: 180 °Diameter of grinding wheel: 150 mmWidth of the grinding wheel: 40 mmDrilling cap. of grind.wheel: 50 mmGrinding wheel speeds:up to: 2800 rpmVoltage 50 Hz 3x: 380 VoltPower: 1.00 HPMachine´s weight about: 450 kgOverall dimensions machine:Length: 800 mmWidth: 750 mmHeight: 1300 mm

Workbench drilling machine height capacity CINCINNATI type P310 Rotation from 400 to 20000 RPM Maxi height base/Chuck nose 200 mm Throat depth 120 mm Maxi drilling capacity: 5 mm Voltage 380 V Base dimensions: 200 x 530 mm Width 350 mm Depth 600 mm Total height 600 mm Weight approx. 50 kg MACHINE IN OUR STOCK IN FRANCE.

Drilling capacity: 0 mmNumber of drilling units: 0  Spindle taper: 0  CNC Brand: 0CNC Model: 0 Technical dataNumber of drill-heads: 2 Drill capacity: 10 mmTable length: 1040 mmTable width: 350 mmSpindle speeds:number (steps): 10 from: 660 rpmup to: 12000 rpmVoltage 50 Hz 3x: 380 VoltMachine´s weight about: 350 kgOverall dimensions machine:Length: 1150 mmWidth: 550 mmHeight: 1700 mmVarious accessories:Drill chuck: 0.5 - 10 mmAdjustable depth stop

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

CITIZEN CINCOM M32 CNC lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine, which is a combination of high performance and precision, enables to perform even the most complex machining of workpieces in 8 axes. All machining processes, i.e. precise drilling, threading and turning are performed inside a fully illuminated work area by means of cutting tools taken from 3 tool stations. The high thermal stability bed inside effectively reduces the influence of heat, increasing the service life of all components and tools. The CITIZEN CINCOM M-32 CNC lathe is offered with an extensive range of equipment, which includes, among others, two spindles (main spindle and sub-spindle) and an FMB bar feeder. All this is complemented by an intelligent CNC control, which allows, for example, self-diagnosis of the machine or program backup. The CITIZEN M32 swiss-type lathe weighs 32 ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

serial no.Q16521 - Iemca Boss 332E-r/32 new in 2009 - drilling milling head (GSE 11107) - chip conveyor - Mitsubishi Meldas 700/730LUC? Control.

CITIZEN M32 V CNC sliding head lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine is used for precision 8-axis machining of workpieces of even the most complex geometries. All machining processes, i.e. precise drilling, threading and turning are performed by 2 reliable spindles and tools taken from 3 capacious tool stations. What’s more, the specially designed bed with high thermal stability perfectly reduces the influence of heat, increasing the service life of all components and cutting tools. The offer also includes a wide range of equipment that significantly extends the machine’s machining capabilities and guarantees excellent repeatability of the manufactured parts. This includes e.g. an advanced CNC controller with many useful functions, such as self-diagnosis and program backup. All this makes the CITIZEN M32V swiss-type lathe the best choice for many  ...

CITIZEN M32 V CNC sliding head lathe was built in 2006 in Japan by CITIZEN MACHINERY CO., LTD. The machine, designed for precision machining of workpieces with complex geometries, is distinguished by the use of a number of state-of-the-art solutions aimed at increasing overall production efficiency. These include among others two reliable spindles with C axis and capacious tool stations. What’s more, a specially designed bed with high thermal stability perfectly reduces the impact of heat, increasing the service life of all components and tools. All this is complemented by an intelligent MITSUBISHI CNC control with many useful functions. The CITIZEN M32V swiss-type lathe weighs 3200 kg. Technical specifications of CITIZEN M32 V CNC lathe General data - maximum turning diameter: 32 mm - turning length in one stroke: 320 mm - maximum turning length: 600 mm - maximum bar length: 3 ...

CMA TRD 38 CNC 3000 CNC drilling machine was built in 2015 in Spain by COMERCIAL DE MAQUINARIA ALZIRA S.L. The machine, designed for drilling precision holes and threading, is an excellent choice for companies specialising, among others, in the construction of machinery, the production of steel structures or the production of other industrial installations. The machine is characterised by, among others, a movable, precise work head and an extremely stable design, made of sections with thickened and reinforced walls. The machining process is performed in three axes (X,Y,Z). In order to achieve excellent dynamic and repeatable feeds, movement in all axes takes place on hardened, high-quality linear guides. All running components are also continuously and fully automatically lubricated, ensuring uninterrupted machine operation for many years of use. The CMA TRD 38 CNC beam drilling machi ...

High speed 5 axes CNC machinning center CMS Concept 40/155/25 PX5 was built in Italy in 2020. The machine, characterised by outstanding robustness and reliability, is designed for precision milling, drilling and 3D machining of parts made of materials such as sand, epoxy and phenolic resin, carbon fibre, fibreglass and aluminium. Dimensioning of workpiece structures is performed by an advanced calculation programme based on the finite element method (FEM), ensuring high geometric accuracy and reliability, even under heavy workloads. Applicable to a variety of industries, the machining centre for composites and aluminium, features a mobile bridge with a PX5 5-axis workhead running on two electrically welded rigid guideways. All five interpolated axes of the head (X,Y,Z,C,A), are equipped with high-performance servomotors and pneumatic brakes. The high-speed electro-spindle, operating a ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milling mac ...