used Snails (Screws) for sale

Stock# U2428-1 Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is eq ...

Used twin-screw, parallel, counter-rotating extruder by Amut model BA92 NOMAX. New 2011. Output: 270 - 370 kg/h Hours of operation: 53638 h Other details: - Diameter of augers 92 mm - L/D ratio 28:1 - Drive power 60 kW (400V, 50 Hz, 3 ph) AC - Two sets of screws -for ABS processing -for PVC processing - Number of cylinder heating zones 7 - Number of cylinder cooling zones (air) 4 - Number of heating zones for head and adaptor 5 + 1 - Built-in pressure and temperature measurement system for plastic mass - Thermal oil unit for thermostating the worms for PVC - Drive power of vacuum degassing pump 11 kW - Drive power of screw feeder 1.5 kW - Without control (subassemblies available according to the list)

200,0 kW, max. 8,60 bar, 30,72 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 hours. New controller Elektronikon Mk4.

400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.

Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available Various used extruder screws of the brand Bekum & Uniloy - S30 to S100 - good condition - tested - immediately available

Machine Benhil 8345 Model. 8345 Capacity up to 90 packets/min Pack size 500 gr Dimensions 150 x 95 Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Product Feed Hopper with Screws Photocell Foil Centering unit Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW

Make : Benhil Model : 8358 & 8535 Format : 25 x 41 mm 6-20g) Capacity : 510 pieces per minute Depending on weight of product Product Feed : Stainless steel Hopper and Screws Paper Feed : 90 deg Case Packer : Benhil 8535 rotary case Packer Photo centering sensor Condition : Very Good Location : Dairy Machinery UK Contact us for more information and to arrange a visit

Screwloader Meat Analyzer CFS Multitrack TS Type Conveyors / Screws / Elevators Height 2300 Width 1800 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 12 kw Main material Stainlees Steel Time of realisation 2-3 weeks Working belt dimentions 400 mm

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

Specifications / Technical Data S-1000/T CNC-Router / CNC-Engraver With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T CNC-engraver achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-router series is usable in the industrial field as well as for works like engraving, milling, drilling ...

Specifications / Technical Data S-1400/T CNC-Router and CNC-Engraver / Engraving Machine (Attention: Pictures are showing the type with trapezium spindles, thats the only different to the t-series ) With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers are conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc-machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this 3D-cnc-machine you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unlo ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine Grabite marble soapstione slate engraving photo engraving, milling .. With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series ...

Specifications / Technical Data S-400/T CNC-Portal-Router / CNC-Engraving machine with TÜV certification With the purchase of the T-variation of High-Z cnc-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T cnc-routers was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T 3D-cnc-engravers achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This 3D-milling-machine series is usable in the indust ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in german TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial f ...

Specifications / Technical Data S-720/T CNC-Engraving-Machine / Milling machine / CNC-Router With the purchase of the T-variation of High-Z CNC-router you get a proven technology with a certain icing of the cake in TÜV-certified quality. High-Z/T 3D-cnc-engraver was conceived for once more precision (repetition precision approx. 0,02mm) and especially for higher traverse speed. Because of the used ball screws the High-Z/T cnc milling machines achieves a fantastic precision and an almost unmeasurable back lash of approx. 0,01mm. At the same time there are high traverse speeds up to approx. 108mm / sec. ( 6.500 mm/min ) possible. With this cnc-machines you're able to carry out an engrave and mill speeds of approx. 4500 mm/min. and express travels up to 6500mm/min. Here's a video on a unloaded drive with the new High-Z / T. This cnc-machine series is usable in the industrial field a ...

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

DIXI CNC Horizontal MC Year: 2008 Model: DHP50-4X Pallet: Pallet Size (2 Pallets): 500x500mm Pallet Indexing: Full 4th Axis Maximum Load On Pallet: 500kg Travels: X-Axis Travel: 700mm Y-Axis Travel: 700mm Z-Axis Travel: 700mm Spindle: Spindle Speeds (RPM): 12,000 RPM Spindle Taper: HSK A 63 Main Motor (HP): 25 kW Tool Changer: Tool Changer Positions: 220 ATC Machine: Power: 1880 kVA Voltage: 460 / 3 Ph Equipped With: Fanuc 16iMB Control Comes with a lot of new spare parts including a spindle and ball screws. Comments: Great condition. Machine was replaced by a new machine and was making good parts the day it was taken out of service. Reported to be holding two tenths. Low hours on this beautiful machine. Only 11500 cutting hours Pallet rotation is full contouring

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is  ...

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

FRORIEP CNC Vertical Boring Mill Double Column REBUILT & CNC RETROFIT IN 1999 FEATURES: SIEMENS 840D CNC CONTROL 2-VERTICAL RAM HEADS CAPACITY: TABLE DIAMETER: 10,000mm TURNING DIAMETER WITH VERTICAL RAMS: 15,000mm MAXIMUM TURNING HEIGHT: 5000mm RAM VERTICAL TRAVEL: 2000mm RAM SWIVEL +/- 30/15 DEG MAXIMUM CUTTING FORCE RIGHT RAIL HD: 25t TABLE LOAD CAPACITY: 200t TABLE SPEED RANGES, INF VARIABLE: 4 TABLE SPEEDS: 0.13 TO 13 RPM CROSS RAIL ELEVATION MOTOR: 40.23 HP NUMBER OF FEEDS, VERTICAL & HORIZ: 30 CROSS RAIL ADJUSTMENT MOTOR 86 HP RAPID TRAVERSE MOTORS: 15.5 HP MAIN MOTOR: 250 HP EQUIPPED WITH: SIEMENS 840D CNC CONTROL NEW 1999 DUAL PENDANT OPERATED CONTROLS 2-VERTICAL CNC CONTROLLED RAMS 10,000mm DIAMETER T-SLOTTED TABLE 4-HEAVY DUTY FACE PLATE TYPE JAWS HYDROSTATIC BEARING SYSTEM FOR TABLE DUAL OPERATORS PLATFORMS DUAL JORGANSEN CHIP CONV ...

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of both screwing units - separately adjustable distance between screwdrivers 250-540 mm - automatic screw feeding - automatic disconnection of the feeder movement - screw depth sensor - foot switch control Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - feed force pressure reducer - additional manual slot for various screws - extended travel +30 mm to 130 mm - laser positioning pointer - screw depth sensor - horizontal pressure

Brand new machine designed for screwing reinforcements in PVC profiles. - simultaneous operation of the screwing unit - adjustable distance between screwdrivers 42-110 mm - Automatic screw connection - automatic automatic movement alignment - the ability to work as a screwdriver - screw depth sensor - powerless steering control - Specific feed account Additional equipment: - machine base - pick-up rollers - pneumatic impulse to the feeder (13mm), preventing jamming of the screws in the feeder at the entrance and exit - screw depth sensor - horizontal pressure

2. Qty. 1 Second-hand process tank Mfc.: Glencore Volume: 280 m³ Built: 2009 Dia.: 6.0 m Height: 10 m Stopped: 2018 Material: AVESTA 2507 (Super Duplex Steel) Code: API - 650 Capacity: 280 m³ Useful Volume: 260 m³ Diameter: 6000 mm Overall Height: 10 000 mm Design: Atmospheric Pressure Service Temperature: xx Stored Product: Process Solution Density: 1.8 kg/dm³ Coating: According to plant Welding: According API 650 Radiography: According to API 650 Asset: Zinc Asturine Application: Leaching process (Acid + spend electrolytic returned – Acid from electrolysis) Construction Structural Element Thickness Material Bottom 10 mm AVESTA SAF-2507 Virolas 6/8 mm AVESTA SAF-2507 Internal 6 mm AVESTA SAF-2507 Ceiling 6 mm AVESTA SAF-2505 External stiffeners AISI-316 6 316Ti Screws A4 - 70

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

HAAS UMC-750SS CNC vertical machining center built in 2018 in the United States is used for precision machining of complex workpieces with a maximum weight of 300 kg. The machine features a large work area which includes a direct-drive spindle, a 500 mm diameter rotary tilting table with a precision pilot hole and a measuring probe from the renowned RENISHAW brand. In addition, each tool taken from the 40-position magazine is continuously measured to ensure continuity of the machining process. The UMC-750SS CNC machining center is offered with extensive equipment, which includes e.g. a belt chip conveyor and a perfectly optimised HAAS NGC CNC controller with many useful functions. To this date, the machine has run a small amount of time and has been used for prototyping, tooling production and small batch machining. The HAAS UMC 750 SS milling center weighs 8200 kg. Technical speci ...

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

HARTFORD LG1000 LG1000 F1 series TABLE Working area mm 1150x510 Table with T-slots mm 18x3x160 Table capacity kg 700 SHIFTS AXIS X mm 1000 Y AXIS mm 510 AXIS Z mm 630 Spindle axis distance to table surface mm 100 ~ 730 Distance of the table axis tip from the column mm 562.5 POSITIONING ACCURACY Positioning accuracy (JIS B6338) mm ± 0.008 Repeatability (JIS B6338) mm ± 0.002 FEEDS Working feed m / min 12 Rapid traverse X / Y / Z m / min 30/30/24 (optional 40/40/32) SPINDLE # 40BT Spindle Nose Spindle speed (belt gear) rpm 8000 (opt. 10000/12000) Spindle speed (DDS) rpm 10000 (opt. 12000/15000) Spindle drive (30 min) 11 kW, belt drive AUTOMATIC TOOL CHANGER Tool magazine capacity A: 24 (opt S: 20) Max. tool weight kg 7 Max. tool dimensions (diameter x length) mm ø75 x 300L (option S: ø90 x 250L) Type of hand ...

The monoblock F87 is an automatic intermittent movement machine that can perform three operations at the same time: a volumetric filling and two closures. Aqueous, alcoholic, sugary, foamy, viscous products can be given. Droppers, glass or plastic pipettes, nebulizers, normal or freeze-drying rubber caps can be introduced. You can apply screw caps, press caps, ferrules, PFP etc. The carter and the machine table, on which all the operating groups are fixed from the inside, are in AISI 304 stainless steel and protect the mechanical parts from the infiltration of the treated products and the water used for washing. The operating units and their supports are made of AISI 304 stainless steel and receive their motion from a single variator motor, obtaining the dual purpose of relating, without interruption, the speed of the machine with the rotation speed of the screwing or seaming, and not to ...

Code: 0011 Brand: ITALPRESSE Model: V/3 Mechanical cold press for gluing doors, furniture, panels, composite materials, technical materials, plastics, aluminium, various materials Platens size mm 3000 x 1200 Opening mm 650 n° 3 pressure screws Installed power Hp 1 Electrical up/down movement Overall dimensions: mm 3350 x 1200 x 1650 h Weight kg 1100

KNUTH PICO TURN CNC lathe built in 2015 in Germany is the ideal choice for small-scale industries focused on unit and small batch production. Due to its extensive machining capabilities, sturdy design and high productivity, this compact size machine performs excellently in, among others, precision arc turning, threading and longitudinal and transverse workpiece turning. All operations are performed by a powerful spindle with variable speed adjustment between 150 and 1750 rpm. The KNUTH PICO TURN CNC lathe is additionally equipped with, among others, an automatic 4-position tool changer, an intuitive SIEMENS SINUMERIK 808D CNC controller and a 3-jaw chuck with a diameter of 125 mm. The total weight of the machine is 400 kg. Technical specifications of the KNUTH PICO TURN mini metal lathe machine - feed rates in the X/Z axis: 500/250 mm - rapid traverse in the X/Z axis: 2000/1000 mm/m ...

Koppens Former Model 600 HS, screw feed machine, 4 x feed screws in the hopper Variable speed up to 50 strokes per minute, hydraulic ram operation. In excellent condition. Offered in good working condition

Krones Solomatic Right-to-law machine Ma-No. 018-D53 Torso-chest back labeling Hot melt device for sealing labels Central lubrication Height GDB program + 0.75 / 0.25 excl. Gluing via lifting motor 2 label magazines 2 aggregates external control cabinet Heuft Spectrum TX with Pusher Format parts, gripper heads and screws available Krones Solomatic Right-hand machine Ma-No. 018-D53 Body-chest-back labeling Hot melt gluing device for sealing labels Central lubrication Height adjustment GDB program + 0,75 / 0,25 excl. Gluing via lifting motor 2 Label Magazines 2 aggregates external switch cabinet Heuft Spectrum TX with pusher Format parts gripper heads and screws available

Cut-to length slitting machine SM-1250х8 Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. This cut-to-length slitting machine lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are four types of the sheet metal cut-to-length machines we make: The manual cut-to-length slitting machine (cutting for 2 strips) The electric cut-to-length slitting machine (cutting for 3-4 strips) The electric cut-to-length slitting machine (cutting for 6-10 strips) The electric cut-to-length slitting machine (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special scr ...

Low & Duff Macintyre Extruder Extruder, Lozenge machine, hopper and six screws (500mm) extruder, previously used for extruding fudge, with manual, 3Ph

MAAD HSSM 1550/1.5 folding machine which was built in Poland in 2017, is designed for folding thin steel sheets with a maximum thickness of 1.5 mm along a straight line at a specific angle. This functional machine, based on an innovative design, guarantees comfortable operation and a wide range of applications, which makes it ideal for many different industries. The MAAD segment folding machine has a clamping bar and a bending bar equipped with interchangeable segment knives of different lengths. Mounted on inbus screws, the segments are made of the highest quality steel, which ensures long-lasting operation of the machine while maintaining excellent bending parameters. After pressing a button on the control panel, the HSSM 1500/1.5 electric segment bending machine operates in automatic mode. The bending bar moves to the set angle and then returns to its initial position. The total we ...

Mechanized table. Sizes: 4500x1220x360mm. Screws for levelling. T slots of 60x35mm. Posibility of sell with a sliding radial drill.

Naxos CNC Multi-Axis Cylindrical Grinder Year: 1987/2013 Max. swing: 630mm Max. distance workhead face to tailstock face: 4850mm Max. travel for Z axis: 5000mm Max. grinding distance for main wheel: 4520mm X axis infeed travel for both headstocks: 720mm Approx. weight between centers: 4000kg Power requirements: 460/3/60 This machine was completely remanufactured to new specifications in 2013 and installed in 2014. It was stripped down to the bare casting, table/base/wheel heads/work head and tailstock and the second z axis ways were fit and rescrapped. New electrical cabinet with all new wiring to the machine and new all components, hydraulic lines, air lines and new cable carriers were added. New Marathon 60HP motors for both grinding wheel heads. (The drives in the cabinet are set for 40 Hp) The spindle drives in the cabinet are Yakawa built in the USA along with the workh ...

Trapezoidal casing for maximum stability when transporting the machine on uneven surfaces. NEW: Storage plate for centring the loading hopper (E1, E2), removable without tools. NEW: Rear access protection for greater working safety High precision, grooveless transport roller and spring suspension blade holder for very low loss of precious meat Dynamic (counter-rotating) stainless steel cleaning cylinder and NOCK Air Jet compressed air cleaning system keeps the transport rollers clean during operation. This guarantees reliable gripping, quick and easy processing and excellent hygiene in the plant. blade holder with fixing screws fine adjustment of the blade hardness for skinning thick-skinned products (e.g. beef) adjustable pressure relief boxes can be placed under the machine from the front or rear ergonomically favourable, height-adjustable safety foot switch  ...

O-M LTD. CNC Vertical Boring Mill FANUC 16T-A CNC CONTROLS, RETROFIT 1994 CAPACITY: TABLE DIAMETER 4000mm MAXIMUM TURNING DIAMETER 7000mm MAXIMUM TURNING HEIGHT 2900mm MAXIMUN HEIGHT UNDER RAIL 3000mm TABLE WEIGHT CAPACITY 45400kg VERTICAL RAM TRAVEL, Z-AXIS 1500mm HORIZONTAL TRAVEL OF RAM, X-AXIS 2550mm TABLE SPEEDS RANGE .55-40 RPM TABLE SPEEDS 16 STEPS FEED RANGE VERTICAL RAM HEAD 0.003-.6 IPR RAPID TRAVERSE, HORIZONTAL HEAD 49 IPM RAPID TRAVERSE, CROSS RAIL 12 IPM RAPID TRAVERSE, COLUMN 21 IPM MAXIMUM TORQUE 58,000 LB/FT EQUIPPED WITH: FANUC 16T-A CNC CONTROLS (RETROFIT 1994) 4000mm T-SLOTTED TABLE WITH 4-TOP JAWS OPENSIDE ADJUSTABLE COLUMN VERTICAL OCTAGONAL RAM ON CROSS RAIL COOLANT CHIP GUARDS MAYFRAN CHIP CONVEYOR 50 HP MAIN MOTOR NOTE: MACHINE IS UNDER POWER FOR INSPECTION. WELL MAINTAINED MACHINE IN EXCELLENT CONDITION! RETROFIT WITH FANUC 16T-A CN ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 4x2000 SMO-2004-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° Eufzrzpm0 - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working len ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x2500 SMO-2506-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade cl ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 6x3200 SMO-3206-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm Eehs322 - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 14 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Total mass: 5200.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 8x3200 SMO-3208-N Hydraulic press brake Specifications - Maximum thickness mild stainless steel: up to 8.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 15 - Backgauge retract distance: 1000 mm - Motor power: 11.0 kW - Length: 4300 mm - Width: 2000 mm Bwydfs9 - Height: 2100 mm - Total mass: 6400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - B ...

Here, you will find no hidden costs. The advertisement concerns the basic version of the machine. All optional extras and their prices can be seen on the received sales quote or by contacting our specialist. We always present the final amount to be paid on sales quotes if the contract is signed within the quote valid period. We always evaluate transport costs from our warehouse in Poland. QC12Y 10x3200 SMO-3210-N Hydraulic press brake Specifications - Maximum thickness mild steel (PN-EN S235): up to 10.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 12 - Backgauge retract distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm - Total mass: 8400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade  ...

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Used EXTRUDER twin screw (TWIN SCREW EXTRUDER) for the production of cereal flakes: Producer: PAVAN Model: TT92 Year: 2002 Dimensions: 6580 x 4150 x 3000 Weight: 2400 kg Productivity: 500 kg / h Power: Description: A twin-screw extrusion device as a result of a continuous and automatic process of a great variety of flour and cereal starches / tubers, both mixed and pure. The materials from the dispensing unit are pre-mixed using a suitable device equipped with counter-rotating blades (double shaft mixer), and then enter the mixing tank for kneading and homogenization. From the mixing tank, through a suitable screw device (forced supply), the mixture is pressed into a group of cooking cylinders in which the cylinders are heated to the desired stage, according to a predefined and automatically controlled temperature profile. compatibility of extruder screws, which are repla ...

Code 71144 Description Horizontal table borer Make PFEIFER Model F 80 / 100 Serial number 2342 Year 1982 Spindle 100 mm Spindle taper 50 ISO Spindle out (W) 500 mm Table 1000 x 850 mm Cross (X) 1200 mm Longitudinal (Z) 800 mm Vertical (Y) 800 mm Distance table-spindle 0 x 800 mm Speeds 18 steps Spindle speeds 14 – 1500 rpm 16 Feeds 0,03 – 6,0 mm/rev Rapids 2500 mm/rev Rapids all directions ( X-Y-Z-W-B) Motor 7,5 kW 380 Volts Accessoiries X-Y-Z axis are BALLSCREWS Tool clamping Pendant control Condition Machine is in very good condition

Used line for the production of the co-extrusion by PST Forming method. PTI - The twin screw extruder DS 92/28   2x screws with a diameter of 92 mm The length of screws 28 x L / D Snails closed system with internal temperature control, deep nitrided, with degassing on the cylinder, extruder equipped with a vacuum pump with filter, Siemens Servo Motor power: 60 KW Torque: Nm 15700 Screw rotation: 0 - 50 rev. / Min. Zones with ceramic heaters with an intense cooling: 5 x 5 KW Cooling Zones: 4 Performance with hard PVC, depending on the materials and tools: max.600kg / h Length: 4500 mm Width: 1600 mm Height: 2300 mm           Extruder equipped with a microprocessor control SIEMENS type Extrusion Pro Pak visualization 2. Co-Extruder PTI - The twin screw extruder DS 68/28 Snails with a diameter of 2 x 68 mm Length of the screws: 28 x L / D Snails cl ...