Meba ECO 335 DGA - Automatic band saw - Material feed up to 600 mm - Year of construction: 2002 Specifications - Cutting range 90° round/flat: 335 / 500x335 mm - Mitre right 45° round/flat: 330 mm / 320x335 mm - Mitre right 30° round/flat: 200 mm / 200x335 mm - Clamping range bundle tension width/height: 0-500 mm / 15-335 mm - Single/Multiple Material Insertion: 0-600 mm / 0-9999 mm - Leftover piece length manual/automatic: approx. 70 mm / approx. 110 mm - Cutting speed: 15 - 150 m/min (AC drive) - Cutting pressure: infinitely hydraulic - Lowering speed: 0 - 300 mm/min (infinitely variable) - Saw blade dimensions: 4400 x 34 x 1.1 mm - Saw blade tension: with torque wrench - Max. contact weight: max. 250 kg/m - Working height: 750 mm - Noise emission: 74 dB(A) Connection data: - Power supply: 3x 400 V / N / PE / 50 Hz - Compressed air: 6 - 8 bar, min. 50 l/min  ...

saw blade diameter: 315 mmcutting diameter: 90 mmstroke: mmturning speeds: 40/80 U/mintotal power requirement: 1,5 kWweight of the machine ca.: 650 Kgdimensions of the machine ca.: 0,9 x 0,8 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Special price € 9,200 instead of € 11,040 excl. VAT Thomas Super Trad 301 So Easy - Semi-Automatic Metal Band Saw - The SO EASY saw allows a complete cutting cycle without the constant presence of the operator, thanks to the hydraulic control system for lowering the saw frame - Hydraulic vise - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch to MANUAL cutting mode with button to quickly access the material to be cut - Central control panel at the front of the machine with illuminated alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting requirements of medium-sized ferrous materials - Large round work table plateau that rotates with the mitre of the saw blade, guaranteeing excellent support for the material to  ...

cutting diameter: 250 mmsaw band length: 3660 x 27 x 0,9 mmcutting width: 400 mmengine: 1,0 KWmotor speeds:: 1400 U/mincutting speed: 20 - 70 m/minweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,55 x 1,0 x 1,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

saw blade diameter: 275 mmcutting diameter: 80 mmstroke: mmturning speeds: 58 U/mintotal power requirement: 0,5 kWweight of the machine ca.: 70 Kgdimensions of the machine ca.: 0,5 x 0,5 x 0,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEP COBRA 350 AX automatic circular sawing machine was built in Italy by MEP SpA. The machine, designed for cutting workpieces at an angle of 90° and 45°, is distinguished by its high productivity and precision. The machining process is performed automatically or manually by means of a cutting disc with a diameter of 350 mm. The cutting disc is continuously lubricated and cooled to increase operational reliability. The MEP COBRA 350 NC AX circular sawing machine weighs approximately 560 kg. It is possible to purchase the machine together with a hydropneumatic press for punching different diameters and shapes. The price for such a set is EUR 6250 net. Technical specifications of the MEP COBRA 350 AX metal circular sawing machine - cutting angle: 90°; 45° - cutting capacity (90°, circle): 105 mm - cutting capacity (90°, rectangular section): 180×70 mm - cutting capacity (4 ...

cutting diameter: 230 mmsaw band length: 2750 x 27 x 0,9 mm: 280 x 150 mmcutting speed: 35/70 m/mintotal power requirement: 1,3/1,7 kWweight of the machine ca.: 0,45 tdimensions of the machine ca.: 3,0 x 2,0 x 1,8 mSemi-automatic band saw- Double miter 45°/60°- Roller conveyor with length stop 2000mm- Roller conveyor feed 3000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

EMMEGI AUTOMATICA 450 automatic circular sawing machine was built in 1995 in Italy by Emmegi S.p.a. The machine, designed for cutting workpieces at 90°, is distinguished by its high performance and precision. The machining process is performed automatically or manually by means of a cutting disc with a diameter of 450 mm, whose feed is regulated hydropneumatically. It is also continuously lubricated and cooled to increase operational reliability. All this ensures that the machined workpieces have a smooth surface without any burrs or distortions. The EMMEGI 450 AUTOMATICA 0-500 circular sawing machine weighs 760 kg. It is possible to purchase the machine with additional equipment. This consists of a hydropneumatic marking press and an M4-M16 threading system. The price for such a set is EUR 10 750 net. Technical specifications of the EMMEGI AUTOMATICA 450 metal circular sawing mac ...

cutting diameter: 250 mmcutting speed: 10 - 70 m/minband speed: 10 - 70 m/min: 400 mm: mmsaw band length: 3660 x 27 x 0,9 mmtotal power requirement: 3,5 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 2,0 x 1,7 x 1,7 minkl. DokumenmtationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

OZGENC MAKINA SL 500 automatic circular sawing machine was built in 2021 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The machine was specially designed for precision cutting of aluminium profiles at an angle of 90°. The entire machining process, from feeding the material to receiving the finished part, is performed fully automatically. The workspace includes, among others, a two-sided clamping system and a high-quality diamond saw with a diameter of 500 mm, the feed of which is regulated by reliable servomotors. The saw is continuously sprayed with coolant in order to increase the cutting quality and extend the operating time. The offered OZGENC MAKINA aluminium sawing machine is also very easy to operate. The touchscreen operator panel with PLC control provides the user with the necessary information, as well as the ability to quickly configure work programmes. The tota ...

cutting diameter: 300 mmsaw band length: 4100 x 34 x 1,1 mmcutting width: 300 mmcutting speed: 10 - 130 m/min: kWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 2,5 x 2,0 x 1,75 mHydraulic band saw machine with- Material feed 900mm- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 240 mm: saw band length: 2965 x 27 x 0,9 mmtable height: mmband speed: 37 / 76 m/mintotal power requirement: 1,0 kWweight of the machine ca.: 0,38 tdimensions of the machine ca.: 1,0 x 1,6 x 1,4 mdouble miter band sawThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOSHAN LX-425 metal circular sawing machine was built in 2019 by the Chinese company Foshan Nanhai Longxin Machinery Co., Ltd. The machine designed for precision cutting of workpieces at a fixed angle of 90° performs the machining process (from loading to the workpiece cutting itself) fully automatically, thanks to the provision of a bar feeder with magazine. The machined workpieces have a smooth surface without any burrs or distortions. In addition, the ability to cut more than one piece of material (bundle) makes the FOSHAN sawing machine an excellent choice for mass production. To this date, the FOSHAN LX 425 circular sawing machine has cut bundles of 4 brass tube profiles into suitable lengths. Technical specifications of the FOSHAN LX-425 tube cutting machine - cutting angle: 90° - cutting disc diameter: 300 mm - cutting disc bore: 32 mm - cutting disc rotational speed: 42- ...

cutting diameter: 320 mmsaw band length: 4570 x 27 x 0,9 mmtable height: mmcutting width: 450 x 280 mmpower capacity: 4,0 kWcutting speed: 15 - 105 m/minengine: 380 Vtotal power requirement: 4,0 kWweight of the machine ca.: 0,8 tdimensions of the machine ca.: 1,8 x 0,8 x 1,2 mBand saw with- coolant device- mitre deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

METALLKRAFT ULMS 420 metal circular sawing machine was built in 2019 in Germany. This extremely powerful machine is the perfect solution for precision cutting of profiles made of light metal, aluminium, plastic or wood at an angle between -45° and +45°. This is all thanks to the reliable cutting disc with a diameter of 420 mm, whose feed is adjustable steplessly. This is what gives the workpieces a smooth surface without any burrs or distortions. The machine also features a special economical lubrication system that continuously lubricates all moving parts, ensuring reliable operation for a long period of time. The offer price includes equipment, consisting of spare cylinders, special custom-made discs for cutting aluminium and a powerful WALTER piston compressor. The ULMS 420 semi-automatic circular sawing machine weighs 199 kg. Technical specifications of the METALLKRAFT ULMS 420  ...

cutting diameter: 400 mmcutting speed: 20 - 197 m/mincutting width: 400 mm: 550 mm: 1100 mmsaw band length: mmband speed: 20 - 60 m/mintotal power requirement: 1,6 kWweight of the machine ca.: 1,8 tdimensions of the machine ca.: 2,3 x 1,9 x 1,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KASTO HBA 1060/1260 AU metal band saw built in 1995 in Germany is used for precision cutting of round, square and flat workpieces. The robust design in combination with the reliable 11400 mm long saw blade allows fully automatic cutting of even the hardest materials, i.e. titanium, at a constant 90° angle. Machining is free of any vibration and oscillation, resulting in exceptional process stability during even the most intensive tasks. The KASTO dual-column band saw weighs 19000 kg. Technical data of the KASTO HBA 1060/1260 AU bandsaw - NC controller - cutting capacity at 90° (round): ⌀ 1060 mm - cutting capacity at 90° (square): 1060 x 1060 mm - cutting capacity at 90° (rectangle): 1260 x 1060 mm - cutting speed: 16-80 m/min - work table dimensions (L x W): 2500 x 1250 mm - maximum workpiece weight: 20 t - material feed length: 2100 mm - saw blade dimensions: 11400 x  ...

saw blade diameter: 250 mmcapacity 90 degrees: round: 70 mmcapacity 90 degrees: square: 65 mmturning speeds: 52 / 104 U/mintotal power requirement: kWweight of the machine ca.: 0,13 tdimensions of the machine ca.: 800 x 600 x 1500 mManual cold circular saw with:- Mitre 45°/45°- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8365 Type: TC 720 Producer: Adige Created: 2003 Parameters: Cutting range (logs): 12-80 mm Cutting area (square): 10x10-70x70 mm Cutting area (rectangle): 15x10-80x70 mm Cutting length: 50-3000 mm Solid bar section: 12-30mm Weight: 2100 kg Equipment: Adige ST 660 (automatic deburring machine)

saw blade diameter: 350 mmcapacity 90 degrees: round: 115 mmcapacity 90 degrees: square: 95 mm: 180 x 95 mmWorking height: 925 mmsaw blade turning speeds: 15+30+45+90 U/mintotal power requirement: 1,8/2,5 kWweight of the machine ca.: 0,38 tdimensions of the machine ca.: 0,8 x 1,0 x 1,85 mManual vertical circular saw for miter cuts from 60° left to 45° right.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8363 Type: RASACUT XS Producer: RSA Created: 2009 Parameters: Maximum sawing speed: 1500 1/min Max. material length: 6200 mm Max. workpiece diameter: 6-30 mm Cutting length: 100-1500 mm Pitch tolerance: 0.2 mm Machine weight: 9600 kg Equipment: Water Dust Extractor SHEV 250 M

cutting diameter: 260 mmdimensions of saw-band: 3660 x 27 x 0,9 mmcutting width: 400 x 260 mmcutting speed: 17 - 106 m/min: 260 mmstroke back stop: 250 mmcross-slide: 400 x 250 total power requirement: 1,5 kWweight of the machine ca.: 0,32 tdimensions of the machine ca.: 1,6 x 0,8 x 1,2 mgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8276 Type: LMSD 400 NORMA Producer: ALUMA Created: 1999 Parameters: The saw is in good condition.

cutting diameter: 325 mmdimensions of saw-band: 3800 x 34 x 1,1 mmcutting width: mmcutting speed: 16 - 87 m/min: 325 mmstroke back stop: 320 mmcross-slide: total power requirement: 1,8 kWweight of the machine ca.: 0,4 tdimensions of the machine ca.: 1,6 x 0,8 x 1,2 mgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8343 Type: HPP 300 profiLine Producer: HOMAG Created: 2017 Parameters: Cutting length: 3200 mm Maximum format size: 3200 x 3100 mm Equipment: NC control

cutting diameter: 360 mmsaw band length: 4420 x 34 x 1,1 mmcutting width: 360 mmcutting speed: 15 - 90 m/min: 3,0 kWweight of the machine ca.: 2,5 tdimensions of the machine ca.: 2,35 x 2,3 x 1,75 mHydraulic band saw machine with- Material feed 800mm- Motorized saw blade tension- Emergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8283 Type: KKS 450 H Producer: Kaltenbach Created: 2019 Parameters: Cutting range: 150 mm Wheel diameter: 450 mm Length: 1320 mm Width: 1020 mm Height: 2000 mm Weight: 1050 kg

cutting diameter: 250 mmdimensions of saw-band: 2825 x 27 x 0,9 mmcutting speed: 35 / 70 m/mintotal power requirement: kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,6 x 0,8 x 1,5 mBand saw- Miter cuts up to 60° left- Vice with quick-clamping device- Electric automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

– Saw blade 400 mm – Double mitre – Material clamp – Material depot –Cap –Documentation – 400V

saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed type RB 1500- Roller conveyor 1500mmGood conditionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Stock-No. 1105-04063 Type of machine Band Saw - Automatic Make KASTO Type Twin A4 Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time at short notice Freight basis ex Warehouse Price Technical details cutting diameter 400 mm saw band length 5700 mm cutting width 400 mm cutting width at rectangle material 400 X 4000 mm cutting speed 20 m/min Cutting pressure adjustable Single stroke device 6-600 mm Multi Station Feed 6-9999 mm weight of the machine approx. 2.7 t total power requirement 8 kW Additional information FULL AUTOMIQUE SAWING MACHINE KASTO TWIN 4 A FROM 2002

cutting diameter: 320 mmsaw band length: 3800 x 32 x 1,1 mmtable height: mmcapacity 90 degrees: round: 320 mmcapacity 90 degrees: flat: 450 x 220 mmcutting speed: 18 - 115 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 0,95 tdimensions of the machine ca.: 1,8 x 1,6 x 1,4 mSemi-automatic mitre bandsaw- Mitre max. 60°- Micro-spraying deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Kasto Saw EBS 320 U, Cutting range round 320 mm, Cutting area square 300x320 mm, Cutting range 45° Mitre 185 mm Saw blade dimension 575x52x2.5 Weight without roller conveyor approx. 750 kg. Weight roller conveyor 550 kg. Storage trestle 60 kg. Universal hydraulics for cutting different materials without changing the saw blade. Replacement saw blades are included in the price. Original documents (wiring diagram, operating instructions with spare parts plan, drawing roller conveyor) are available.

cutting diameter: 250 mmsaw band length: 3100 x 27 x 0,9 mmcapacity 90 degrees: square: 220 mmcapacity 90 degrees: flat: 280 x 190 mmband speed: 37 / 74 m/minsawing motor: 1,5 kWweight of the machine ca.: 0,5 tdimensions of the machine ca.: 1,6 x 1,4 x 1,3 mMiter band saw- Semi-automatic- Double miter- Material detection during loweringThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used Metal Circular Saw Int. Art. Ref. m3656 Manufacturer Metallkraft Type MKS 350 Year of construction approx. 2004 Motor power 1.4/2.4 kW Speeds 40/80 rpm. Vise span 120 mm Saw blade diameter 350 mm Weight approx. 210 kg Cutting performance: - Tube 90° 90 mm - Tube 45° 80 mm - Round, full 90° 65 mm - Round, full 45° 60 mm - Square 90° 85x85 mm - Square 45° 70x70 mm - Rectangle 90° 120x70 mm - Rectangle 45° 80x70 mm Accessories: - various tools and keys -Coolant pump -Saw blades -Oil -Guide Item location: 59425 Unna The machine can be visited. We will be happy to send you more photos by e-mail. A forklift for loading is available. Prior sale is reserved. It is possible to professionally examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimension ...

cutting diameter: 250 mmdimensions of saw-band: 3505 x 25 x 0,95 mmtable height: 450 mmcutting speed: 10 - 110 m/mintotal power requirement: 3 kWweight of the machine ca.: 1,1 tdimensions of the machine ca.: 2,0 x 2,2 x 1,4 mFully automatic band saw- including chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Optimum 275 G Demonstration Machine Model: Opti S 275 G Specifications: Cutting range 0 degrees round: diameter 225 mm Cutting area 0 degrees: 245 x 180 mm / rectangle Cutting range 45 degrees round : diameter 160 mm Cutting range 45 degrees: 160x160 mm / rectangle Cutting range 60 degrees round: diameter 100 mm Cutting range 60 degrees: 100x100 mm / rectangle Lifting the saw bracket: manual Feed: infinitely adjustable

cutting diameter: 170 mmband length: 350 mmcapacity 90 degrees: square: 160 mmcapacity 90 degrees: flat: 170 x 220 mmtotal power requirement: 0,85 kWweight of the machine ca.: 180 Kgdimensions: 1,2 x 0,8 x 1,0 mHydraulic hacksaw with:- Coolant deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mössner Rekord SFF 1050 Vertical Band Saw Dqnqed -Year of construction 1996 -Automatic table feed -Projection 1050mm -Passage height approx. 400mm -Saw band welding device / Ideal -Stepless speed regulation -Control panel -Work light Dimensions: LxWxH 2x2x2.1 meters / Weight: 1850 kg

saw blade diameter: 400 mmcapacity 90 degrees: round: 135 mmcapacity 90 degrees: square: 130 mm: 200 x 80 mmsaw blade turning speeds: U/mintotal power requirement: kWweight of the machine ca.: 1,2 tdimensions of the machine ca.: 2,0 x 1,8 x 1,95 mAutomatic circular saw with- Feed roller conveyor 1500- Roller conveyor with stop 1000mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used machine Metora VMB 280 including chip conveyor. Machine works in manual as well as semi-automatic mode. automatic feed is not functional. Year of construction not apparent Machine in preparation, photos to follow.

saw blade diameter: 400 mmcutting diameter: 130 mmstroke: 150 mmcutting speed: 30 - 130 m/mintotal power requirement: 1,5 / 2,6 kWweight of the machine ca.: 0,55 tdimensions: 1,2 x 0,8 x 1,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ref.Nr. 00847 Name of the system Used robust cold circular saw Manufacturer: Kaltenbach Model KKS 400 H Year of manufacture 1985 Research: Saw blade diameter diameter: 400mm Cutting diameter: approx. 130mm Stroke: 150mm Total power: 1.8/2.7 kW Weight: 850kg Dimensions approx. 1205 x 1005 x 1705mm Cutting range 90 degrees square 120x120mm Cutting area 90 degrees flat 315x40mm Cutting speed: 10-40m/min Operating Voltage 380V 3~/50Hz Submission date immediately

Saw blade diameter: 255 mmSawblade tiltable: 45 °Cutting height: 75 mmTable dimensions: 640 x 920 (ausgezogen) mmSaw blade: 30 mmMotor output: 1,6 kWconnected load frequency: 230 Vmachine weight ab.: 32 kgDimensions (L/W/H): 720 x 1080 x 920 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MEP Shark 282 CCS band saw. 3-speed 400V, 2-speed motor runs smoothly. Continuously adjustable speeds from 0 to 72 RPM. Miter sawing possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum sawing capacity, round: 250 mm Maximum sawing capacity, square: 220 mm Maximum clamp opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125x70x190cm Feed track dimensions: 200x53x90cm Includes accessories as shown in the pictures. Freight delivery throughout Europe possible!

roll diameter: 420 mmthroat: 410 mmsaw band length: 3150 - 3260 mmsaw band width: 3-16 weight: ca. 600 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lg.Nr. 24534 Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vise 185 mm - Cutting range with saw blade diameter 350 mm - at 90° about 100 mm flat up to 170 x 90 mm - at 45° around 95 mm flat 125 x 90 mm - Mitre adjustable - Left up to 60° / Right up to 45° - 2 saw blade speeds 36 / 72 1/min - Drive 400 V / 1.8 / 2.4 kW - Coolant device - Space requirement approx. W 700 x H 1700 x D 800 mm - Weight approx. 450 kg

cutting diameter: 330 mmsaw band length: 4100 mmcutting width: 480 mmround: 330 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.