We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Controlled Axes 4 axes (X, Y, Z, and electrospindle continuous rotation A-axis) Axis Strokes X-axis (Longitudinal): 7,700 mm Y-axis (Cross): 270 mm Z-axis (Vertical): 420 mm A-Axis Travel 0° to 180° continuous rotation (allows machining on 3 sides directly, up to 5 sides with angular units) Working Modes Single-piece (up to 7.7 m), multi-piece, and pendular/dynamic pendular (two independent work zones) Electrospindle Power 7.0 kW (S1 continuous duty) Spindle Speed Up to 16,500 RPM Tool Holder / Cone HSK-50F Tool Magazine 8-slot automatic tool changer mounted directly on the X-axis carriage Tool Compatibility Accommodates milling bits, 1 angular unit, and saw/disc blades up to Ø 180 mm
Max. saw blade diameter: 500 mm Automatic positioning of length and angle (90° or 45°), intermediate mitres adjustable from the front Moving roller conveyor Material support pneumatically folds up Minimum quantity spraying device USB Port Instruction manual Weight: 1400 kg
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg
Rollable chip extraction for aluminium or PVC For double mitre saws or single-head saws
Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spraying device Weight: 1800 kg
Max. saw length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor Material support Minimum quantity spraying device
Five Axis CNC Controlled Dual Head Double Miter Circular Sawing Machine with Loading and Unloading Device Maximum section length with two saw heads at the same time - 6,000 mm Maximum saw blade diameter Ø 550 mm Infinitely programmable mitre angle adjustment - 15° / 90° / + 45° Saw blade drive power 2 x 2.64 kW Dimensions approx. 11.3 m x 2 m x H 2 m (with closed safety doors)
Lenght 5m Options: Load&unload VIRTUAL AXIS FOR CUTTING UNITS INCLINATION PROFILE CLAMPING LABEL PRINTER
4 Axes CNC Machining Center for working of bars of aluminium, PVC, light alloys in general and steel pieces up to 2 mm X AXIS (longitudinal) (mm) 4.000 Y AXIS (transversal) (mm) 270 Z AXIS (vertical) (mm) 420 A AXIS (electrospindle rotation) 0° ÷ 180°
Max blade diameter: 450 mm Weight: approx. 700 kg Hydropneumatic saw blade feed via 2 manual operation Pneumatic material tensioners Minimum quantity spraying device Table rotatable on both sides with rest points at 45°
Afkortmachine met één kop en oplopend mes voor het zagen van grote secties, ontworpen voor 90° snijden. Een opvallend kenmerk van dit product is de optimale kwaliteit van het snijvlak, gecombineerd met herhaalbaarheid en nauwkeurigheid. De mesaanvoer is pneumatisch. 2 verticale pneumatische klemmen 2 horizontale pneumatische klemmen max. vlak werkstuk: 600 x 50 mm max. rechthoekig werkstuk: 150 x 340 mm / 200 x 280 mm Dia saw / abrasive - disk : 650 mm Power needed / motorpower: 5,5 kW
A CNC aluminum profile processing center Emmegi including a corner joining machine Pressta 1800 is available. Axes: 4, travel X/Y/Z: 4300mm/270mm/300mm, speed: 20000rpm, tool positions: 4, angle machining heads: 2, max. magazine saw blade diameter: 180mm, tapping capacity: M8, machine dimensions X/Y: approx. 5000mm/1300mm, weight: approx. 2200kg, spindle hours: 14422h. Documentation available. On-site inspection is possible. Expected to be available from January 2025.
Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.
Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.
This 4-axis Emmegi COMET X6 vertical machining centre was manufactured in 2021. Consider the opportunity to buy this Emmegi COMET X6 vertical machining centre. Contact us for more information.