We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Year: 2019 - technically efficient, ready to work – after full service - engine: 3 kW/400V motor - vertical blade diameter: 450 mm - horizontal blade diameter: 350 mm - certical cutting blade on one side up to 45° - cutting range at 90°: 153 x 110 mm - cooling and lubrication system - roller support for longer profiles
Gebr. Cut-to-length and mitre circular saw GRAULE ZS135N Year not known Motor power: 2 kW (380V) can be swivelled on both sides ( 1x 45° / 1x 60°) 45° tiltable Max. cutting height: 135 mm on original machine stand GRAULE 2 pneum. Workpiece clamp Engine brake incl. 3 spare saw blades The machine came from an inter-company training centre. Manufacturer information
Offer 26347 Technical data: - Saw blade diameter approx. 250 mm - Saw blade bore 30 mm - Cutting area up to 115 x 55 mm - Mitre adjustment left + right - Saw blade speed approx. 2800 1/min - Drive 400 V / 4 kW - Space requirement approx. W 850 x H 1150 x D 700 mm - Weight approx. 100 kg - Support rail with dimension stop 3200 mm
Offer 26346 Technical data: - Saw blade dimensions - Vertical 450 x 4.5 x 40 mm negative - Horizontal 350 x 3.5 x 40 mm positive - Notching range at 90° approx. W 250 x H 153 x D 110 mm - Vertical saw blade can be swivelled from 90° to 45° on one side - Horizontal saw blade adjustable in height and depth - Movable material support table - Profile stop shoulder swivel - Pneumatic material clamping strength - Pneumatic coolant spraying device - Digital displays for angle adjustment - Air connection 6 bar - Drive 400 V / 2 x 3 kW / 2800 rpm - Space requirement approx. W 1600 x H 1500 x D 1100 mm - Weight approx. 600 kg
Year: 2017 - technically efficient, ready to work – after full service - disc diameter: 420 mm - cooling installation - double-sided pneumatic clamp - hydraulic feed brake - pressure reducer
Year: 2006 - technically efficient, ready to work – after full service - motor: 3 kW - both cutting discs can be tilted +/- 45 degrees - cutting disc: 450 mm (vertical), 400 mm (horizontal) - cooling and lubrication system - compressed air preparation station - electronic angle indicator for two axes
400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand
Graule ZS 170 with roller conveyor and length stop
Graule ZS 135 with roller conveyor and length stop
Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
Year: 2016 - technically efficient, ready to work – after full service - motor: 3 kW/400V - milling diameter: 250 mm - milling width: 305 mm - material stop can be rotated in both directions up to 20° - vertical and horizontal pneumatic profile clamping - compressed air preparation station - cooling and lubrication system
Milling cutter diameter 250 mm Max. milling depth: 80 mm Milling width: 330 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg
Max. saw blade diameter: 420 mm Cutting height: 170 mm Mitre range swivel with digital display: 45°-90°-25° Miter range tilt with digital display: 90°-45° Hydraulic feed brake Pneumatic material tensioners Saw blade spraying device Hand crank for tilting
Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame
Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg
Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional
- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides
Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional
Graule ZS 170NF Cutting and miter circular saws Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 430 mm (at 90°) Cutting height 170 mm (at 90°) Miter range: horizontal 45°-90°-25° Miter range: vertical 90°-45° (left) Saw blade s. 420 mm Suction nozzle 100 mm Weight 120 kg
Graule ZS 170N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3500 RPM Cutting length 430 mm (at 90 °) Cutting height 170 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 420 mm Dust nozzle 100 mm Weight 120 kg
Graule ZS 135N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3800 RPM Cutting length 440 mm (at 90 °) Cutting height 135 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 350 mm Dust nozzle 100 mm Weight 100 kg
Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg
Pull saw GRAULE ZS 200 N -used-automatic brake, feed brake, machine can be tilted on both sides via hand crank at the rear, pneumatic spraying device---------- Technical data ----------cutting height: 200 mm, cutting length: 400 mm, motor: 3 kWQuality info: - Guides checked / adjusted- complete basic inspection- complete basic cleaning- electrics checked- immediately ready for use
Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes from the front; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:
cutting height at 90°: 170 mm; cutting length: 410 mm; miter vertikal: -60° bis +60°; sawblade diameter: 420 mm; speed: 2800U/min; motor power: 2,2 kW; motor brake: yes; suction connection: 100mm; machine length: 1,20 m; machine width: 0,7 m; Maschinenhöhe: 1,50 m; waight: 110kg;
Cutting height at 90Â: 170 mm; Cutting length: 410 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: -60Â to +60Â; Digital Display: Miter Vertical and Horizontal; Roller conveyor / support table: no; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Feed Brake: Yes; Extraction connection: 100 mm; Machine length: 1.20 m; Machine width: 0.70 m; Machine height: 1.50 m; Weight: 110kg;
Cutting height at 90Â: 215 mm; Cutting length: 410 mm; Saw blade swivel : yes; Saw blade tiltable: no; Roller conveyor / support table: no; Saw blade diameter: 550 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Hold-down: pneumatic; Spraying device: Yes, minimum lubrication system; Feed Brake: Yes, Hydraulic; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;
Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:
cutting width: 90°: 410 / 45°:290 mm Cutting height: 170 mm Cutting height at 45°: 115 mm saw blade diameter: 420 mm machine weight ab.: 150 kg Saw blade: 40 mm saw blade turning speeds: 3350 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.