used 10 for sale

Inv. Num. : 8300 Type: ITS2 8025 Producer: AMADA Generated: 2000 Parameters: Hours: 35047 h Compressive force: 80 t Maximum bending length: 2500 mm Stroke: 100 mm Machine weight: 4950 kg Equipment: Tools

Inv. Num. : 8320 Type: 250 T Producer: GALATO Generated: 2000 Parameters: Compressive force: 250 t Table length: 1500 mm Table width: 1000 mm Stroke length: 130 mm Maximum stroke rate per minute: 22-72 1/min Machine height: 4650 mm Machine length: 2550 mm Machine width: 1340 mm Machine weight: 25000 kg Equipment: ARKU RM 3060.4/21 Uncoiling and leveling system

Inv. Num. : 8319 Type: LZ-01RY Producer: Miyano Created: 2003 Parameters: Control system: FANUC Maximum length of travel in the X-axis: 245 mm Maximum feed rate in the Z-axis: 240 mm Max. rod diameter: 70 mm Length: 2100 mm Width: 1680 mm Height: 1555 mm Weight: 4000 kg Equipment: Spares Kitagawa BB210 Chuck 6 and 8

Inv. Num. : 8318 Type: LZ-02RY Producer: Miyano Created: 2009 Parameters: Control system: FANUC Maximum turning length: 81.3 mm Max. turning diameter: 99.1 mm Maximum length of travel in the X-axis: 300 mm Maximum feed rate in the Z-axis: 240 mm Maximum spindle speed: 4000 1/min Length: 2600 mm Width: 2300 mm Height: 2400 mm Weight: 3900 kg Equipment: Spares Kitagawa BB210 Chuck 6 and 8

Inv. Num. : 8298 Type: UMC 750 Producer: HAAS Created: 2020 Parameters: Control system: HAAS Switch-on hours: 7037 h Hours: 5222 h Table diameter: 500 mm Maximum table load (even): 300 kg Spindle drive power: 22.4 kW Number of axles: 5 pieces Maximum spindle speed: 8100 1/min X-axis travel: 762 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm Max. tool diameter: 127 mm Max. tool length: 305 mm Max. tool weight: 5.4 kg Number of Stack Positions: 30 1 Axis C: 360 st

Inv. Num. : 8224 Type: W 100 Producer: TOS Created: 1972 Parameters: Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Taper: Morse Spindle diameter: 100 mm Equipment: Front panel DRO NEWALL

Inv. Num. : 8203 Type: ALPHA 2800 XS Producer: Harrison Created: 2011 Parameters: Control system: FANUC Maximum turning length: 2000 mm Maximum turning diameter over bed: 800 mm Maximum turning diameter over support: 710 mm Maximum spindle speed: 1400 1/min Spindle bore: 125 mm Weight: 7500 kg

Inv. Num. : 8171 Type: UDARA 10 Producer: WMW Created: GO 2019 Parameters: Wire diameter: 3-8 mm Cable length: 150-3000 mm Input power: 7.5 kW Machine weight: 1200 kg

Inv. Num. : 8263 Type: L210A Manufacturer: Hyundai Created: 2014 Parameters: Control system: FANUC Maximum turning length: 410 mm Max. turning diameter: 350 mm Maximum spindle speed: 4000 1/min Bar diameter: 66 mm Length: 2413 mm Width: 1651 mm Height: 1880 mm Weight: 4104 kg

Inv. Num. : 5441 Type: HSA – 428EA Producer: Hartford Created: 2015 Parameters: Control system: Heidenhain 530iHSCI Switch-on hours: 14613 h Operating hours: 5484 h Work table length: 4000 mm Work table width: 2500 mm Maximum table load (uniform): 18000 kg Spindle drive power: 26 kW Maximum distance between the spindle and the table: 2800 mm X-axis travel: 4000 mm Y-axis travel: 2800 mm Travel distances Z-axis: 1400 mm Number of axles: 5 pieces Maximum vertical spindle speed: 6000 1/min Maximum feed speed axis X: 10000 mm/min Maximum feed speed axis Y: 10000 mm/min Maximum feed speed axis Z: 10000 mm/min Cone: ISO 50 Number of all tools: 32 pieces Rapid traverse X/Y/Z: 16000/20000/15000 mm/min Max. tool weight: 15 kg Coolant tank: 400 l Machine height: 6415 mm Machine length: 13000 mm Machine width: 7300 mm Machine weight: 44000 kg  ...

Inv. Num. : 8192 Type: Scorpion H21 Producer: HOUFEK Created: 2021 Parameters: Control system: FANUC FS 31i-B5 Hours: 17207 h Work table length: 3200 mm Work table width: 2100 mm X-axis travel: 3900 mm Y-axis travel: 2750 mm Travel travel Z-axis: 350 mm Rapid traverse X/Y/Z: 70/70/35 m/min Max. workpiece height: 150 mm Accuracy: 0.1/1000 mm Repeatability: 0.05 mm Equipment: Vacuum tank 500l Tool probe RMP40 workpiece probe Mobile control panel Vacuum Fencing 2x Becker vacuum pump 100 HSK A 63 Clamping Cone 1/2022: Replacement of the HITECO spindle with HSD

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg

Inv. Num. : 8191 Type: Xpert 320 Producer: Bystronic Created: 2018 Parameters: Compressive force: 320 t Maximum bending length: 4100 mm Lifting height: 565 mm Motor power: 30 kW

Inv. Num. : 8196 Type: SRM 125 CNC Producer: ŠKODA Created: 1974, GO 2010 Parameters: Control system: Heidenhain Manual Plus 4110 Maximum turning length: 3000 mm Maximum turning diameter over bed: 1250 mm Maximum turning diameter over support: 900 mm Maximum workpiece weight: 14000 kg Length: 8000 mm Width: 3000 mm Height: 2100 mm Weight: 16350 t Equipment: Fixed bezel Technical documentation Front panel Cutter head Universal chuck

Inv. Num. : 8183 Type: DMU 100T Producer: DMG Created: 2001 Parameters: Control system: HEIDENHAIN Work table length: 1500 mm Work table width: 795 mm Speed: 10000 1/min X-axis travel: 1080 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Machine weight: 9700 kg

Inv. Num. : 8179 Type: AUTHOR X5 Evo Producer: Morbidelli Created: 2007 Parameters: Axis X: 4400 mm Axis Y: 1350 mm Axis Z: 1090 mm Weight: 5120 kg

Inv. Num. : 8259 Type: S5-A701S Producer: EPSON Created: 2010 Parameters: Control system: EPSON RC 180 Maximum arm reach: 786 mm Axle number: 6 Machine weight: 36 kg

Inv. Num. : 5261 Type: ZX 1250 Producer: EUROMAC Created: 2010 Parameters: Compressive force: 30 t Maximum sheet thickness: 8 mm Table length: 2520 mm Table width: 1900 mm Max. travel length of the X-axis: 2250 mm Max. travel length of the Y-axis: 1250 mm Automatic reduction in X: 10000 mm Maximum table load (even): 150 kg Maximum punching speed: 2000 1/min Max. workpiece weight: 60 mm Spindle power: 8.5 kW Machine length: 3980 mm Machine width: 3630 mm Machine weight: 7000 kg

Inv. Num. : 8227 Type: U-620 Producer: Spinner Created: 2011 Parameters: Control system: Siemens Number of axles: 5 pieces X-axis travel: 620 mm Y-axis travel: 520 mm Travel travel Z-axis: 460 mm Maximum vertical spindle speed: 10000 1/min

Inv. Num. : 8050 Type: CM A64C Producer: Chmer Created: 2006 Parameters: Table dimensions: 800 x 500 mm Max. travel length of the X-axis: 600 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 350 mm Maximum table load: 1500 kg Maximum electrode weight: 100 kg Container dimensions: 1350 x 740 x 450 mm Machine weight: 3000 kg

Inv. Num. : 8049 Type: EDM 310 Producer: Exeron Created: 2009 Parameters: Table dimensions: 350 x 550 mm Max. travel length of the X-axis: 310 mm Max. travel length of the Y-axis: 270 mm Max. travel length of the Z-axis: 270 mm Maximum table load: 500 kg Maximum electrode weight: 25 kg Dielectric container capacity: 140 l Container size: 350 x 770 x 520 mm Length: 1500 mm Width: 1760 mm Height: 2200 mm Weight: 1650 kg

Inv. Num. : 8131 Type: HPD-S 63 Producer: Hydrap Created: 1997 Parameters: Compressive force: 63 t Stroke: 1000 mm Maximum lifting speed: 410 mm/s Machine height: 2200 mm Machine length: 1200 mm Machine width: 500 mm Machine weight: 13000 kg

Inv. Num. : 8091 Type: VP Producer: SECO/WARWICK Created: 2024 Parameters: Control system: Siemens S7-1500FS series Maximum temperature: 1300 C Internal dimensions of the machine (LxWxH): 1500 x 1700 x 1700 mm Capacity: 3000 kg Working vacuum: 5x10-2 mbar

Inv. Num. : 8136 Type: PNC 100 Producer: JUNG-ASYST Created: 2006 Parameters: Work table length: 600 mm Work table width: 250 mm Maximum spindle speed: 4200 1/min Grinding wheel diameter new: 250 mm Magnet length: 500 mm Magnet width: 200 mm Machine height: 1800 mm Machine length: 2200 mm Machine width: 1500 mm Machine weight: 1800 kg

Inv. Num. : 8054 Type: HYDROPTIC 6 Producer: SIP Generated: Parameters: Work table length: 1100 mm Work table width: 842 mm Maximum spindle speed: 2000 1/min Maximum table load (even): 1000 kg X-axis travel: 1000 mm Y-axis travel: 700 mm Z-axis travel: 800 mm Spindle power: 6 kW Machine height: 3205 mm Machine length: 3280 mm Machine width: 2335 mm Machine weight: 10000 kg

Inv. Num. : 8165 Type: PPM 20-40 Producer: HACO Created: 1996 Parameters: Control system: ATL 900 Compressive force: 40 t Maximum bending length: 2100 mm Distance between frame walls: 1600 mm Machine height: 2100 mm Machine length: 2200 mm Machine width: 1200 mm Machine weight: 3000 kg

Inv. Num. : 8106 Type: TP1260M Producer: Le Mans Created: 2023 Parameters: Maximum power: 6.6 kW Length of profiles: 12000 mm Maximum workpiece weight: 1000 kg Maximum profile: HEB 240 mm Maximum pipe diameter: 380 mm

Inv. Num. : 8105 Type: TruMatic L3030 Producer: Trumpf Created: 2002, GO 2023 Parameters: Maximum power: 3.2 kW Work table length: 3000 mm Work table width: 1500 mm Source: LASER TLF 3200

Inv. Num. : 8150 Type: PDqV 4-500 Producer: KRUPP Created: 1972, GO 2008 Parameters: Compressive force: 500 t Table length: 3000 mm Table width: 1800 mm Distance between frame walls: 3100 mm Maximum stroke rate upper table: 11 1/min Ram stroke: 850 mm Adjustment of the ram: 350 mm Main motor power: 75 kW Machine weight: 158000 kg According to the GO in 2008, the press was in operation for a maximum of 100 hours. In the years 1972–2008, the press was operated in two shifts.

Inv. Num. : 8067 Type: WWD30-10 Producer: ZT Italy Created: 2021 Parameters: Maximum Inlet Diameter: 3.3 mm Minimum Outlet Diameter: 0.55 mm Maximum output diameter: 1.05 mm

Inv. Num. : 5211 Type: DMU 80 P Producer: Deckel Maho Generated: 2000 Parameters: Control system: Heidenhein TNC 430 Switch-on hours: 87285 h Hours: 34100 h Minimum vertical spindle speed: 20 1/min Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Cone: ISO 40 Number of all tools: 30 pieces Equipment: IKZ Workpiece Probe Conveyor Spindle cooling 2020: Replacement of the PILS contactors New E/R module New X/Y Module 2019: Lock Replacement Workpiece Probe Sensor Replacement Replacing the hydraulic hose of the tool clamp 2018: New X/Y axle bolt Replacement of the Y-axis blind Replacement of the B-axis planetary gearbox New motor and B-axis measuring cable 2016: New spindle bearings System Replacement Replacing the UV105 power supply Replacement of the spindle mod ...

Inv. Num. : 8162 Type: CSD 102 Producer: Kaeser Created: 2005 Parameters: Capacity: 600 m³/h Max pressure: 11 bar Speed: 2965 1/min Nominal power: 55 kW Maximum temperature: 3-45 C Machine weight: 1300 kg

Inv. Num. : 8144 Type: LYNX 220 LSYA Producer: DOOSAN Created: 2014 Parameters: Control system: Fanuc iSeries Max. turning diameter: 525 mm Maximum turning diameter over bed: 600 mm Maximum turning diameter over support: 400 mm Maximum main spindle power: 15 kW Axis X: 205 mm Axis Z: 560 mm Axis Y: 105 mm Weight: 4150 kg Equipment: Sub-spindle

Inv. Num. : 8160 Type: VWL 1200 Producer: MSA Created: 2015 Parameters: Axis X: 1300 mm Axis Z: 1000 mm Max. spindle speed: 500 1/min Inner diameter: 250-1400 mm Number of axes: 3 Length: 3800 mm Width: 3390 mm Height: 4400 mm Weight: 12000 kg

Inv. Num. : 8139 Type: QTN-200M Producer: MAZAK Created: 2005 Parameters: Control system: Mazatrol Fusion 640 T Nexus Maximum turning length: 538 mm Maximum turning diameter: 210 mm Maximum Spindle Speed: 35-5000 1/min Tool magazine: 12 pieces Maximum length of travel in the X-axis: 230 mm Maximum feed in the Z-axis: 575 mm Number of axes: 3 pieces Chuck Size: 8 (Kitagawa BB208) Power consumption: 37 kW Length: 2485 mm Width: 1780 mm Height: 1840 mm Weight: 4380 kg

Inv. Num. : 8115 Type: PEKR 400 Producer: Richter Created: 1961 Parameters: Compressive force: 400 t Stroke length: 10-220 mm Maximum stroke rate per minute: 30 1/min Adjusting the ram: 160 mm Motor power: 30 kW Max. sheet thickness: 26 mm One hole in the table: 400/255 mm Machine height: 3750 mm Machine length: 2400 mm Machine width: 3250 mm Machine weight: 42000 kg

Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg

Inv. Num. : 8042 Type: SA 55/3000 Producer: Microcut Created: 2019 Parameters: Control System: FANUC Series Oi-TF Operating hours: 1060 h Max. turning length: 3000 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 310 mm Spindle speeds: 2400 1/min Maximum main spindle power: 15 kW Maximum workpiece weight: 2000 kg Axis X: 300 mm Axis Z: 2150 mm Axis Y: 40 mm Number of tool head positions: 8 Length: 5190 mm Width: 2245 mm Height: 2050 mm Weight: 7500 kg Equipment: Tool head TBYA Baruffaldi

Inv. Num. : 8025 Type: Imperia Producer: Rabolini Created: 1993 Parameters: Format: 850x1250/1000x1400 mm Equipment: Loader

Inv. Num. : 8023 Type: ECOCUT 1.3 Producer: Scharmann Created: 1981 Parameters: Control system: Siemens System 8 Y-axis travel: 1600 mm Travel Z axis: 1000 mm Travel W: 600 mm Spindle speed: 12-3000 1/min Spindle diameter: 125 mm Spindle power: 30/20 kW Cone: ISO 50 Equipment: Technical documentation

Inv. Num. : 8034 Type: Compact Producer: VANAD Created: 2010 Parameters: Plasma Source: Formica For CUT 163 WDM

Siemens mobile C-arm Siremobil ISO-C with Tube SR 110 0.6 Image intensifier 23 cm Dual monitor (flat screen) on trolley • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in IST condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as Used, EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Just arrived and now awaiting refurbishment by the team is this Boy 22M-HV machine. The injection unit can be mounted vertically or horizontally, allowing for split line or traditional moulding respectively. Fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. These small machines are quite rare on the used market, they are very versatile from a very small footprint. The rest of the machine is standard as per a typical BOY 22M, you can find the specification data via the clickable link above. Fitted with the Procan MD version of the user friendly and well supported Procan control system. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure duri ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 500-170, Golden Edition, injection moulding machine. Fitted with a 35mm plasticising unit and the Selogica controller. It is one of the most popular machines on the used market and Arburg have done exceptionally well with the combination over the years. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarante ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 30M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Engel Victory VC500/120 injection moulding machine. This is a tiebarless machine so offers great versatility in the mould shop. With direct lock, this machine is able to accommodate a large range of mould sizes making it an ideal choice for trade moulding or those with a large suite of tools. Engel offers very good support for this model, with spares and technological know how easily available. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign  ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing mac ...