used 11 for sale

Used semi-automatic tablet/capsule counter, produkcji firmy Kwang Dah z Tajwanu, model KDC-101. New: 2012 Capsules or tablets are counted in the machine by a sensor measuring the filling of the bottles. The sensor ensures accurate counting and dosing of tablets, lozenges, pills or transparent capsules. The machine is equipped with a compensator and a sensor that provides automatic adjustment according to the collected powder in the sensor window. Power supply: AC 110V/230V, 50Hz, single-phase, 5A Machine weight: 70kg Machine dimensions: 88 x 76 x 70 cm（length x width x height）

Wide-belt sanding machine Bütfering Type VEGA 113 E Year of manufacture 1996 Working width 1350 mm Sanding belt width 1370 mm Workpiece thickness maximum 160 mm 1 grinding unit Combination unit with contact roller and segment sanding shoe With abrasive belt, grain size compensation and calibration device Automatic contact roller 85° Shore Electronically controlled link pressure beam Patented system CPS (see below) element width 50 mm Infinitely adjustable pressure on the workpiece edges 3-way pole-switchable drive motor 7.5/10/15 kW Sanding belt speeds 4.5/9/18 m/s Belt blow-off device Pneumatic abrasive belt tensioning device Feed speed 2.5-13 m/min Roller table at the infeed Roller table at the outlet Motorized height adjustment with digital display Cleaning brush 3 kW Total connected load approx. 20 kW CPS: (C)ompact-(P)ressure-(S)ystem Self-contained, m ...

Specifications Maximum pressure: 75 tons Year of Make: 1999 Press force: 90.9 t/m² Number of bindings: 4 vertical Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1020 x 1550 mm Bale weight: 500-750 kg Weight: approx. 25 tons Power connection: 400 V Bale tying: automatic Motor: 75 kW (possibility of switching to 55 or 45 kW) Press capacity at idle: max 750 m³ / hour Press capacity under operating conditions: max 350 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 12 tons/hour Theoretical throughput to density 60 kg/m3: approx. 21 tons/hour Theoretical throughput to density 100 kg/m3: approx. 33 tons/hour Open hopper allows filling with the conveyor belt. Knife on the press plate and on the frame of the press to cut off the excess material. Automatic regulation of the light from the channel. Automatic binding with wire Cho ...

SPECIFICATIONS: Spindle: Ø 40 mm Table size: 1000 x 1100 mm Installed power: 7.5 HP Electronic height/tilt adjustment

Equipped with : 1 x Polar 115X guillotine, equipped with : air table, 2 side tables, 2 knives, photo cells, program 1 x Polar RA-H-4 jogger 1 x TR-130 right hand unloader 1 x Polar lift

Offer 25110 Specifications: - Saw blade dimensions 2950 x 27.0 x 0.9 mm - Cutting speeds infinitely variable N 36 to 72 m/min - Max. clamping possibility 325 mm - Mitre adjustable up to 60 ° - Cutting range at 90° around 250 mm - Square 220 mm - flat 280 x 200 mm - Cutting range at 45° around 230 mm - flat 180 x 110 mm - Pneumatic connection 6 bar - Drive 400 V / 1.5 / 1.8 kW - Coolant device - Chip clearing brush - Feed roller conveyor 4000 mm - Discharge roller conveyor with dimension stop 4000 mm - Weight approx. 450 kg - Space requirement approx. W 1400 x H 1650 x D 1350 mm

FULLY-AUTOMATIC SIDE BELT CASE SEALER C/W INSTALLATION MODEL : RS 22-2 BRAND : BESTPACK CARTON SIZE : 150MM (L) UNLIMITED X 110-510MM (W) X 110-510MM (H) OPP TAPE HEAD : 2 OPP TAPE AUTOMATICALLY ADJUST HEIGHT SIDE DRIVE BELT COMPRESSION CYLINDER IS BRAKE SAFETY GATES (RIGHT 2/LEFT2) WITH CUT-OFF SWITCH

AUTO STAMPING MACHINE UNFOLD BOX FEEDER SYSTEM AUTO STAMPING MACHINE WITH UPGRADE VERSION 2.0 SPECIFICATION : Model : B'Smart 1000 - 2.0 Paper : CARTON & INNER Carton Min. Sise : 371 x 350 x 6.6 (mm) Carton Max. Size : 902 x 890 x 11.3 (mm) Inner Min. Size : 310 x 120 x 10 (mm) Inner Max. Size : 430 x 180 x 10 (mm) Structure Dimention : 2870 x 1045 x 850 (mm) Structure Material : Mild Steel Powder Coat Machine color : Blue Conveyor Speed : 40Meter / Min ( Adjustable ) Feeding Direction : Horizontal Power : 1 Phase

Offer 25108 Specifications: - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° around 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° around 110 mm - flat 135 x 60 mm - Mitre adjustable left + right 45 ° - Tiltable mitre adjustment of the saw head for slather cuts on the left - Pneumatic vises - Discharge – roller conveyor with 2000 mm - Roller conveyor feed 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

OTT Alpha 136 heavy-duty wide-belt calibration fine grinding machine Combined grinding unit Contact Roller - Calibration 90 SH pneum. Sanding shoe unit auto. Cleaning brush unit Working width 1360 mm Motor power grinding unit 11 kW semi-auto, workpiece dimension Grain size compensation for contact roller Total connected load approx. 15 kW Year of construction 1988 Machine is CLEANED, FUNCTIONAL in GOOD CONDITION From the carpentry site 

Product number: 3065 Type: UNIMIX 1500L Serial number: 62267 Year of construction: 2002 Mixer: 1500 litres, double shaft paddle mixer Infeed height: 1850 mm Outfeed: 800 mm, double tote bin Weighing cells: Flintec SB4-20kN GP-s Indicator: Bizerba Height open lid: 3500 mm Power: 3 x 400V, 50Hz, 11kW Dimensions: 2600 x 1700 x 2300 mm Machine on weighing cells Suitable for CO2 cooling

Product number: 3066 Type: PRoGRILL 1175 TFEF Serial number: 3237006 Year of construction: 2014 Belt width: 1100 mm Cooking length: 10000 mm Heating: thermal oil, 189kW + electric, 128kW Exhaust: 1000 m³/h Steam: 3 - 7 Bar Compressed air: 6 Bar, 12 l/min Water: 15,4 l/min for belt washer Power: 3 x 400V, 50Hz, 168kW Dimensions: 10000 x 2200 x 2450 mm With flipover conveyor in the middle Including welding trolley

Anko dough mixer: Product number: 3059R Type: ABM-33 Serial number: PO202200591-2 Year of construction: 2022 Mixer: 80 litres Power: 3 x 380V, 50Hz, 2.2kW Dimensions: 1100 x 1450 x 1300 mm Bottom dicharge Anko dough sheeter: Product number: 3060R Type: ABS-220 Serial number: PO202200591-1 Year of construction: 2022 Width sheet roller: 220 mm Capacity: 100 kg/hr Thickness dough: 4 - 12 mm Power: 3 x 380V, 50Hz, 2.25kW Dimensions: 1300 x 950 x 1400 mm Anko gyoza dumpling machine: Product number: 3061R Type: AFD-888 Serial number: 1501093 Year of construction: 2022 Capacity: 6000 pc/hr Hopper: 46 litres Power: 3 x 380V, 50Hz, 3.5kW Dimensions: 2450 x 2000 x 2050 mm Weight: 1400 kg

Thickness planer Rex - Constant planer Type: HO 63 Year of Make: 1980 Constant table height 800 mm 4-column guide and adjustable top Working width max. 630 mm Working height min. 5 mm to max. 280 mm 4-knife wedge bar shaft Knife flight circle D=140 mm Knife shaft speed 4,500 rpm. Chip removal max. 10 mm Feed speeds 8 + 16 m/min. Thickness table length 1,200 mm with 2 sliding rollers in the thickness table Motor 8.80 kW / 380 V / 50 Hz Pole-switchable feed motor 0.55 / 0.75 kW / 380 V / 50 Hz Electric height adjustment motor 0.55 / 380 V / 50 Hz Fine adjustment with 1/10 mm pitch Precision thickness measuring device with magnifying glass display Driven feed roller D=124 mm (top) Driven pull-out roller D=124 mm (top) Articulated pressure beams Suction nozzle D=160 mm Dimensions L 1100mm x W 1215 mm x H1770 mm Weight 1,350 kg

Centauro Slitting Saw Type SLG 8000 Year of construction: 2011 Cutting length max. 8000 mm Cutting width max. 1900 mm Cutting height max. 160 mm Motor 11 kW with laser light with pressure beam

Module 2 TCG 2016 V 16 C - 800 kW - 43,636 operating hours -Natural gas - Engine number: 2211009 - Year of construction: 2013 - Complete TEM control system with auxiliary unit control - RMG Gas Line – Natural Gas All service work was carried out by MWM service partners according to the manufacturer's specifications / maintenance plan. Sale due to site conversion and plant renewal. More pictures, information and offers on request. Viewing possible at any time by arrangement. Location: 49811 Lingen / Ems Subject to prior sale

Hymmen glue application machine 4 Roller Glue Dispensing Machine Type LA 4W Working width 1300 mm 2 rubberized fluted rollers The rubber lining/fluting is in poor condition See pictures 2 rubberized smooth rollers Ribbed rollers diameter 230 mm Smooth rollers diameter 180 mm Maximum passage height 100 mm Application speed 10 and 20 m/min. Motor power 1.1 kW Emergency out of leverage Dimensions 1950 mm x 1100 mm x H 1150 mm Weight with pallet 1300 kg Machine is function-tested Sale in actual condition

Circular saw Weinig Type 700S Machine No. 965/258 With saw blade diameter 500 mm Cutting height maximum 160 mm Including saw blade diameter 350 mm Saw blade spindle diameter 30 mm Motor power 3 kW 2 speeds Table tiltable 0-45° Angle stop on machine table Cutting width to the right of the saw blade with stop max. 700 mm Table size 1100 mm x 950 mm Extraction connection diameter 120 mm 2 pieces of new V-belts Cables and connectors new Dimensions 1100 mm x 1200 mm x H 1100 mm Weight with pallet 615 kg

UV dryer Superfici Type TU166-25+2UVM55 Serial No. 4548 Year of construction 1998 Passage width 1500 mm 2 UV lamps Material thickness maximum 110 mm Maximum width of the workpiece 1400 mm Height-adjustable feet Dimensions 2500 mm x 2300 mm x H 1650 Control cabinet dimensions 1000 mm x 850 mm x H 2180 mm

Frame press Hess Type VARIANT Machine No. 2182 Built in 1979 Pneumatic Frame Press Workspace 3700 mm x Height 2300 mm 4 bars with pressure cylinders from above Stop side left 1 movable pressure bar from the right with 2 pressure cylinders Cylinder stroke 110 mm Compressive force per cylinder 1100 kp (1kp = 1kg) Compressed air connection max. 15 bar Weight approx. 550 kg Exterior Dimensions 4400 mm x 700 mm x H 2800 mm Loading dimensions 4400 mm x 600 mm x H 2300 mm + Pallet with pressure beam 2800 mm x 800 mm x H approx. 700 mm

Veneer press Joos Hydraulic Hot Plate Press Type HP 65/1 Machine No. 2313 Pressing area 2200 x 1100 mm Opening height max. 300 mm 2 electrically heated plates 4 hydraulic cylinders Cylinder diameter 80 mm Rack and pinion guide Press pressure 2.7 kg/cm² at 100% design Pressing pressure 3.8 kg/cm² at 70% design Closing time approx. 16 sec. Power requirement 1.1 kW Dimensions 2600 mm x 1250 mm x H 1800 mm Weight approx. 2,500 kg

Miter punch With table extension With foot lever With table extension Technical features: Double mitres 45º Simple mitres 90° Maximum cutting height 160 mm Maximum cutting width 110 mm Weight approx. 50 kg

Table milling machine Kölle Milling machine and circular saw combined Type FK 5 Machine No. 462 With feed ELU With 30 mm and 40 mm milling spindle With sliding table Motor power tiller 3 kW Milling shaft speed 2800/4500/6000/10000 rpm. Spindle left and right rotation Table size 1400 mm x 920 mm Table opening minimum 70 mm – maximum 390 mm Milling spindle 30 mm with clamping length 130 mm Milling spindle 40 mm with clamping length 140 mm Feed ELU with 3 rollers Saw motor power 1.5 kW Saw blade spindle diameter 30 mm Speed 3300 rpm. Saw blade diameter maximum 350 mm Cutting height maximum 105 mm Sliding table support 1100 mm x 450 mm Extraction connection diameter 2 x 120 mm Weight 1050 kg with pallet Dimensions for shipping 1 pallet with sliding table 2700 mm x 800 mm x H 1000 mm 1 pallet with machine 1600 mm x 900 mm x H 1800 mm

Wide belt grinding machine Carstens Grinding width 1100 mm Grinding height approx. 120 mm Vacuum transport carpet in good condition Combination unit: 1 sanding belt runs over the hard rubber roller and shoe Cleaning brush in the spout Heavy, solid grinding machine with manageable technology. Good, ready-to-use condition Weight approx. 2000 kg

Dresser Kölle Surface planing machine Type AH 50 Machine No. 137 Year of manufacture 1985 Planing width 500 mm Maximum cutting depth 8 mm Dressing tables 1450 mm + 1270 mm Dressing stop 1100 mm x 150 mm Swivelling dressing stop Motor power 5.5 kW Engine slightly slowed down 4 Knife Shaft Strip planer knife Serrated table lips for noise reduction With Kölle swing protection for planer blade shaft With spare blades With planer knife adjustment gauge Weight with pallet 650 kg Dimensions 2800 mm x 850 mm x H 1000 mm

Veneer Press Moulding Press Bürkle Type FPMU Total baling area 2200 mm x 1100 mm divided into 3 faces, each 700 mm x 1100 mm the surfaces can be pulled out to the front per pressing surface 2 press pistons diameter 50 mm Maximum opening 430 mm Press surfaces not heated With emergency stop ripcord Hydraulic pump 1.1 kW Dimensions 3000 mm x 1300 mm x H 1920 mm

Chain milling machine Festo Lock box milling machine Type: PP Machine No. 80816 For wall mounting With door cover With many chains and swords Pneumatic workholding Slot width 8-16 mm Milling depth 175 mm Slot length 30 – 300 mm Clamping height 1000 mm Table adjustment longitudinal/transverse 250/70 mm Maximum wood thickness 230 mm Motor power approx. 2.2 kW Weight with pallet 180 kg Shipping dimensions 1200 mm x 800 mm x H 1100 mm

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Heesemann Wide Belt Sander Heesemann Multi-Purpose Surface Sander Type MFA 8 Machine No. 97.11.261 Year of Manufacture 1997 CE For sanding flat wood materials and/or flat painted wood materials Sanding width 1300 mm Sanding belt width 1350 mm Sanding belt speed 12/24, 0.5 – 12 / 20 m/sec. 2 sanding units. Unit arrangement: QLBw1300 Cross belt Longitudinal belt via sanding pad Brush unit Ionization and workpiece blasting CSD 16 mm/48 mm CSD pressure bar system with variable pressure control Machine control with graphical control panel with program memory for various types of wood and paint. With ionization device and workpiece blasting Ionization reduces the adhesion of grinding dust to the workpiece by neutralizing electrostatic charge, thus ensuring optimal workpiece cleaning. Cross belt, 13/17 kW motor power Longitudinal belt, 11/17 kW motor power, 11 kW ...

Holtec parcel cross-cut saw Type: HF 121 Cutting width 1100 mm Package height 1100 mm Input roller conveyor approx. 4000 mm long Output roller conveyor approx. 3000 mm long Width of roller conveyors 1200 mm Good, ready-to-use condition.

Holtec parcel cross-cut saw Type: HF 121 Year of Make: 1989 Cutting width 1200 mm Package height 1100 mm Input roller conveyor approx. 4500 mm long Output roller conveyor approx. 5000 mm long Width of roller conveyors 1200 mm both roller tables driven Connected load 11 kW / 21.5 A Good, ready-to-use condition.

Gluing stars Polzer Floor gluing press Type: EVA - 6 E Year of manufacture 1989 6 gluing shelves with 2 special heating plates each Gluing dimension 2100 mm x 1100 mm With Leimangabestation With 2 lifting devices for loading and removing the panels With roller conveyor Workpiece thickness maximum approx. 50 mm For removal, the plate is pneumatically lifted Per floor: 7 pneumatic pressure cylinders 100 mm diameter, 100 mm stroke, compressive force 740 kg per cylinder, Movable pressure plate 250 mm x 40 mm 2 cylinders to operate the upper heating plate Insertion opening 700 mm 2 electric heating plates Each electric heating plate 220/380V, 3 kW, thermostats 0 – 120°C Operating pressure 8 – 10 bar Gluing temperature adjustable, ideally 50-65° Capacity approx. 50 m²/h With protective grille External dimensions approx. 4000 mm x 4000 mm x 3600 mm

Multi-rip saw Raimann Type: K 23 E Year of manufacture 1984 With blade adjustment With 2nd socket With 3 laser lights Control panel for positioning control Cutting height without pressure screen 120 mm Cutting height with pressure screen maximum 110 mm Cutting height with movable saw blade without pressure screen maximum 105 mm Cutting width 230 mm Chain width 250 mm Saw blade diameter maximum 360 mm Saw blade diameter minimum 250 mm Feed speed 8 – 35 m/min. Feed motor 1.1 kW Saw motor 37 kW Diameter of the saw shaft 65 mm Saw blade bore 80 mm Shortest timber length at 110 mm cutting height without pressure rake 750 mm Shortest timber length with pressure rake 290 mm Maximum passage width from machine stand 460 mm Table height 850 mm Table length 1770 mm Dimensions 2400 mm x 1500 mm x 1600 mm Weight approx. 2,500 kg

Conveyor belt Consisting of 2 separately driven conveyor belts On a rack Conveyor belt 1 Width 2600 mm x support length 870 mm Feed motor 0.55 kW Feed infinitely adjustable Support height 1100 mm, height adjustable Conveyor belt 2 Width 2600 mm x support length 2000 mm With perforations and extraction fan from below Feed motor 1.5 kW Feed infinitely adjustable Support height 1100 mm, height adjustable Dimensions complete 3400 mm x 2970 mm Height 1120 mm Weight approx. 2,300 kg

Rex Trainers Surface planing machine Type A 410 Working width 410 mm 4 Knife Shaft Serrated table lips Total table length 2340 mm Feed table length 1170 mm Removal table length 1170 mm Chip removal max. 6.5 mm Blade shaft speed 5,500 rpm. Motor power 4 kW Weight approx. 600 kg

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

Water-sprinkled extraction wall Water Extraction Wall Wet Spray Wall Spray Wall Make Schuko Type FAW 20/35 Make No. 090496 Year of construction 07/2003 Baffle surface Height 2000 mm Width 3500 mm Dimensions height 2920 mm x width 4000 mm Exhaust pipe diameter 450 mm Air flow rate 11,000 m³/h Motor power: 5 kW Water pump Flow rate max. 12 m³/h Motor 1.45 kW With Schuko paint sludge disposal Type: FEP For cultivation on water-sprinkled spray walls

MARTIN T90 Four-sided crane with NC control and 6 spindles and swing axle (Left3) Specifications: Brand: MARTIN Type: T90 with 6 spindles incl. pendulum axle (left 3) Year of Make: 2023 A1 - Refurbished and Repainted M-No.: V239722 Operating hours: 5,962 hours Feed table: 2000 mm Table height adjustment: Max. Spahn name 10 mm Stop bar: Manual adjustment 10 mm Planing width: 22 - 260 mm (profiling width top 4 is 260 mm, spindle 5 & 6 is tool dependent) Planing thickness: 5 - 160 mm (profiling width right/left is 160 mm, spindle 5 & 6 is tool dependent) Planing shaft: 1st spindle, with max. 10 mm decrease, 260 mm, flight circle min. ø100 mm - max ø125 mm Calibration planing and contour shafts: 2 & 3 spindles (vertical spindles) max. 10 mm, clamping length 160 mm, flight circle min. ø100 mm - max ø125 mm Thickness shaft/upper shaft: 4th top spindle  ...

X axis 11.000mm Y axis 3.000mm Z axis 700mm W axis 800mm Spindle diameter 160mm Spindle taper iso 50 Spindle speed 1.800 rpm Spindle power 65kw ATC 60 positions Yom 1995 Nr 02 rotary table:-2.500x2.500mm capacity 25 ton ( 2 axes controlled) -2.000x2.000mm 15 tons capacity ( 2 axes controlled) One birothative head Two boring heads Floor plates included

SENCO Smart Bridge Brand: Senco Type: Smart Bridge 35008000 Year of Make: 2020 M-No.: Control: Senco - nagelpositionering Specifications: Dimensions: X: 8,000 mm Y: 3,500 mm Z: approx. 400 mm Feed: X Manual Y: Handwheel adjustment Z: Manual Nail/screw positioning: LCD screen X: 10 - 8,000 mm, freely programmable Y: 1 - 8,000 mm, freely programmable Z: max. mm Workpiece Positioning: 0-edge table Positioning Laser Line Y-Axis Project Planning Laser line X-axis project planning nail positioning Nail spacing: Freely programmable in X and Y direction Nail depth: Compressed air adjustable Weight: +/- 400 KG Placement: Aggregate spaces: 1 aggregate pick-up positions 2 front, 1 rear Screws, nails or staplers can be mounted 2 units fixed to the num edge (Y-axis) (1 per side), 2 aggregates freely positionable ...

Weeke ABD 150 Automatic Drilling and Dowel Insertion Brand: Weeke Type: ABD150 Year of construction 2013 Machine Number: 0-253-05-5352 Description: CNC-controlled duel drilling and driving machine Workpiece Dimensions: X-Axis: Y-axis: Z-axis: Stroke in the middle: Field of work: Positioning: X-Axis: Y-axis: Z-axis: Stops: Support table with front and back stops 6 workpiece supports can be freely positioned over the entire X-length with scale Pneumatically operated center stop, manual control via pressure switch 5 Vertical pressure cylinde, manual positioning Vacuum clamping for sensitive surfaces 10 vacuum suction cups freely to position over total length (115140100 mm) 2 vacuum cups (12575100 mm) 1 vacuum suction cup for shablone Vacuum pump: 40m³/hour Aggregates: Horizontal drilling unit with 1 spindle Dowel station (32 mm distan ...

MARTIN T27 FLEX with CNC 4-axis control, electric height adjustment of the feed T27FX/1-a Swivel spindle milling machine T27 FleX in CE version with infinitely variable speed control T2704-a Stepless speed control with 9.5 kW motor. (13 hp) 1,000 – 12,000 rpm, incl. T2711-A Digital Display Insertion Stop in Control T2712-a electric motor. Positioning of the milling fence T2714-a electric motor. Positioning table opening for WZ Ø70-250 T2715-a electric motor. Positioning Feed Support T2731-a Table extension on both sides + pull-out workpiece support T2745-A Swing Away Device Milling Fence T2770_85-a milling mandrel with HSK 85 mount and PowerLock (compatible with Weinig PowerLock) T2773-a Milling mandrel HSK 85 Power Lock ø.. Mm

Truck IVECO E80 first registration 11.07.2013 with new remote control cranes 3 -12 tons Diesel - continuous brake system 10.5 tons Tüf has to be redone.

METALLKRAFT Profile steel shears / hole punch HPS 65 DS Combined hydraulic profile steel shear and hole punch with punch, notching station and flat steel, angle steel and profile steel shear - for simultaneous work on punch and profile steel shear Punching station - Punching pressure: 65 t - Punching capacity: max Ø 26 x 20 / Ø 57 x 10 mm - Projection: 305 mm - Stroke: max. 55 mm - Number of strokes: 25 strokes/min - Working height: 900 mm Steel bar shears - Round cutting capacity: max. Ø 45 mm - Square cutting capacity: max. 45 x 45 mm - Angle steel shears - Cutting capacity L-profile 90°: 120 x 120 x 12 mm - Cutting capacity L-profile 45°: 70 x 10 mm - Cutting capacity U-I profile: 120 x 58 mm - T-profile cutting capacity: 90 x 11 mm - Working height: 1,140 mm Flat steel shears - Cutting capacity 90°: max. 300 x 20 / 375 x 15 mm - Angle cut 45°: max.  ...

Laboratory Homogenizing Mixer Manufacturer : Becomix Type: RW 2.5 Content: 5 litres boiler capacity Technical specifications : Vacuum homogenizing system Mobile table version Usable space: Operating temperature 100 °C Pressure -1/+1 bar, vacuum-resistant Capacity 5 litres Boiler room: Operating temperature 110 °C Pressure 4 bar Power 4.8 kW Content 2 litres Equipment: Agitator with wall scraper 20-160 rpm Left-hand rotation/counterclockwise rotation and alternating left-right rotation Homogenizer 500-6,600 rpm Surface in the product room is highly polished The following components are integrated: Vacuum pump Heating PLC control PC with process visualization and automation software Documents: available

Fully Automatic Shrink Wrapping Machine Bought on: 06.2021 Location of the machine: Denmark Availability: Immediately available Condition: Used, hardly used, fully functional plus transport costs by arrangement Technical data (according to manufacturer's specifications): • Power supply: 230 V, 1 Ph, 50 Hz • Power: approx. 3.2 kW • Max. product dimensions (L×W×H): 500 × 390 × 160 mm • Max. film width: approx. 600 mm • Film specification: shrink film, polyolefin or PE • Throughput: up to 3,000 cycles/h (depending on the product) • Machine dimensions (L×W×H): approx. 2400 × 1000 × 1650 mm • Weight: approx. 500 kg • Operation: Touchscreen with intuitive menu navigation • Safety equipment: CE compliant with emergency stop and protective cover Special features: • Fully automatic packaging process • Built-in shrink tunnel • Programmabl ...

Offer 24561 Specifications: - Pressure capacity 25 t - Pressure regulation infinitely variable 0 - 25 t - Stroke length approx. 0 - 200 mm - Max. installation depth approx. 200 mm - Lifting speed 0 - 1600 mm/min - Tool height approx. 120 mm - Bending capacity : - Flat bars approx. 120 x 15 mm - Square bar approx. 30 x 30 mm - V - Dies + Sharpening Tools - Stop 500 mm - Drive 400 V / 5.5 kW - Space requirement approx. W 1200 x H 1100 x D 1200 mm - Weight approx. 650 kg

Table size: 850 x 410 mm X/Y/Z travels : 700/400/330 mm Rapid traverses rates (X/Y/Z): 54 m/min CNC: Fanuc 31i model B5 Tool magazine capacity : 21 Max. table load: 300kg Spindle speed range: 100-10000 rpm Distance btwn table & spindle nose (min./max.): 150-480 mm Noise level:

Offer 24365 Specifications: - Bending performance pipe at 45 kg / mm² to Ø 60 X 4 mm - Solid material up to 45 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 171 mm - Smallest inner bending radius Ri 10 mm - Drive 400 V / 4 Kw - Space requirement approx. W 400 x H 950 x D 600 mm - Weight approx. 100 kg - with - bending angle preselection - Digital bend angle display + bend angle fine adjustment - Manual tube twisting device - Bending tools 22 R 67 mm, 25 R 82 mm, 35 R 110 mm - Flat steel bending attachment

Offer 25182 Specifications: - Max. working width 2040 mm - Max. material thickness 4 mm - Roller diameter each 140 mm - Stroke 70 mm - Rear roller + lower roller adjustable for conical bending - Upper and lower roller motor-driven - Working speed right + left 6 m/min - Drive 380 V / 6.2 kW - Space requirement approx. W 3560 x H 1100 x D 870 mm - Weight approx. 1700 kg - with: - asymmetrical roller arrangement - Crowned turned naturally hardened rollers -one. Rear roller adjustment - Bending - Swing-out upper roller - E-footswitch for clockwise and counterclockwise rotation