used 12 for sale

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 29,565 mm Number of fields / row of shelves: 09 pcs. á 3,600 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 09x Pallet rack stand, used Material colour: Ral 5015 blue Profile dimensions: 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 3,300 mm high 1,100 mm deep 32x Pallet rack crossbar, used Material colour: Ral 2004 orange Box profile: 120 x 50 mm Truss Type: PNB0442 Agraffe: 4 HK (hooks) Clear width: 3,600 mm Max. load per pair of trusses 2,058 kg with the same weight. Distributed load 64x Safety pin, used Material colour: sendzimir galvanised For securing the longitudi ...

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 35,950 mm Number of fields / row of shelves: 09 pcs á 3,900 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: Ral 5015 blue Profile dimensions: 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 3,300 mm high 1,100 mm deep 36x Pallet rack crossbar, used Material colour: Ral 2004 orange Box profile: 100 x 50 mm Truss Type: PNB0480 Agraffe: 4 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 1,500 kg at the same weight. Distributed load 72x Safety pin, used Material colour: sendzimir galvanised For securing the longitudinal ...

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 35,950 mm Number of fields / row of shelves: 09 pcs á 3,900 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 10x Pallet rack stand, used Material colour: Ral 5015 blue Profile dimensions: 85 x 65 x 2.0 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) 3,300 mm high 1,100 mm deep 36x Pallet rack crossbar, used Material colour: Ral 2004 orange Box profile: 140 x 50 mm Truss Type: PNB0444 Agraffe: 4 HK (hooks) Clear width: 3,900 mm Max. load per pair of trusses 2,300 kg with the same weight. Distributed load 72x Safety pin, used Material colour: sendzimir galvanised For securing the longitudin ...

HAUSER S 40 400 CNC coordinate grinding machine CN retrofitted in 2020. TECHNICAL FEATURES: NC Type: FANUC 0i-MF X-axis travel: 650 [mm] Maximum speed X-axis travel: 4000 [mm/min] X-axis working feed speed: 0 - 1800 [mm/min] Y-axis travel: 450 [mm] Y-axis working feed speed: 0 - 1800 [mm/min] Z-axis travel: 130 [mm] Minimum speed. Z-axis travel: 0.5 [mm/min] Maximum speed Z-axis travel: 12000 [mm/min] Z-axis stroke frequency: max. 4 [Hz] W-axis travel: 500 [mm] C-axis speed (planetary): 5 - 250 [rpm] Maximum speed W-axis travel: 800 [mm/min] U-axis stroke (radial advance): 5.5 [mm] Distance between columns: 750 [mm] Table length: 770 [mm] Table width: 630 [mm] Clear passage between grinding motor and table: 585 [mm] Maximum weight Tabletop Allowable: 500 [Kg] Supply voltage: 400 [V] Weight: 5000 [Kg] EQUIPMENT INCLUDED: 1 HAUSER tool detection device 1 ...

MORI SEIKI 5-axis CNC turning and milling center type NTX1000 SZ TECHNICAL FEATURES: Year: 2011 CNC Type: FANUC MSX-711 IV Number of continuous axes: 5 Maximum diameter Turning Capacity: 370 [mm] Maximum length Machinable: 424 [mm] Y-axis travel: 105 Z1 axle stroke: 460 [mm] X1 axle stroke: 380 [mm] Z2 axle stroke: 610 [mm] X2 axle stroke: 155 [mm] B-axis angular travel: 120 [°] B-axis indexing accuracy: 0.0001 [°] Maximum rotational speed Milling spindle: 12000 [rpm] Milling spindle tool attachment: Capto C5 Maximum power Milling spindle: 9 [kW] Tool Magazine Capacity: 76 Maximum length Tool Size: 250 [mm] Maximum diameter Tool Size: 130 [mm] Maximum weight per tool: 5 [Kg] X1 axis fast feed speed: 40000 [mm/min] X2 axis fast feed speed: 20000 [mm/min] Z-axis fast feed speed: 50000 [mm/min] Z2 Axis Fast Feed Speed: 36000 [mm/min] Y-axis fast feed speed: 40 ...

NAKAMURA NTJ100 CNC Lathe TECHNICAL FEATURES: Year: 2014 NC Type: FANUC 31i-B-NT-IPS Colour touch screen: 19 [] Distance between spindles: 910 [mm] Maximum diameter Turning time: 175 [mm] Maximum length Machinable: 678 [mm] Z1 axis stroke: 1040 [mm] X1 axle stroke: 330 [mm] Y1 axis travel: +/- 40 [mm] Z2 axis stroke: 678 [mm] X2 axle stroke: 127.5 [mm] Y2 axis travel: +/- 32.5 [mm] B-axis angular travel: 182 [°] X-axis fast feed speed: 20000 [mm/min] Z-axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 6000 [mm/min] Spindle Nose: A2-6 Maximum diameter in bar: 65 [mm] Maximum speed Spindle: 4500 [RPM] C-axis indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Counter Spindle Nose: A2-5 Maximum diameter Counter-spindle bar 42 [mm] Maximum speed Spindle: 5000 [RPM] C-axis sub-spindle indexing accuracy: 0.001 [°] Spindle power: 7.5 [kW] Number of  ...

STUDER S 33 - CNC inter. cylindrical grinding machine /Exter. TECHNICAL FEATURES: Year: 2006 Year of reconstruction: 2025 FANUC NC Type: 21i-TB Distance between toes: 1000 [mm] Spike height: 175 [mm] X-axis travel: 285 [mm] Minimum speed. X-axis stroke: 0.001 [mm/min] Maximum speed X-axis travel: 5000 [mm/min] X-axis resolution: 0.0001 [mm] Z-axis travel: 1150 [mm] Minimum speed. Z-axis travel: 0.001 [mm/min] Maximum speed Z-axis stroke: 10000 [mm/min] Z-axis resolution: 0.0001 [mm] B-axis angular travel: -15 [°] / +195 [°] [°] B-axis indexing accuracy: Hirth 1 [°] Automatic B-axis: Yes Workpiece Spindle Nose: ISO 50 Maximum speed Workpiece Spindle: 1500 [RPM] Tailstock Cone: MT3 Tailstock sleeve stroke: 35 [mm] Diameter of tailstock: 50 [mm] Tailstock fine adjustment: +/- 40 [μm] EQUIPMENT INCLUDED: x1 Inter Grinding Electrospindle. FISCHER type MF ...

CNC controller: FS-31IA5 (MAPPS 4) Capacity Turning length mm: 1.542 Max. turning diameter mm: ø: ø660 Swing over bed mm: ø: ø730 Turning diameter f. lower turret mm: ø350 Distance between spindle centers mm: 1.862 Bar work capacity mm: 91 Turn-mill spindle Full indexing specifications: Yes X-axis travel mm: 750 Z-axis travel mm: 1.550+100 (for ATC) B-axis degree: ±180º (0.0001°) Speed spindle rpm: 12.000 Y-axis travel mm: ±210 Drive power kW: 18,5/11 Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0.28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Manufacturer: KITAGAWA Maximun torque Nm: 60kN Counter spindle Speed sp ...

CNC controller: FS-31IA5 (MAPPS 4) Capacity Turning length mm: 1.542 Max. turning diameter mm: ø: ø660 Swing over bed mm: ø: ø730 Bar work capacity mm: 91 Distance between spindle centers mm: 1.862 Turning diameter f. lower turret mm: ø350 Turn-mill spindle Full indexing specifications: Yes X-axis travel mm: 750 Z-axis travel mm: 1.550+100 (for ATC) B-axis degree: ±180º (0.0001°) Speed spindle rpm: 12.000 Drive power kW: 18,5/11 Y-axis travel mm: ±210 Tool magazine Magazine places: 100 Tool holder: CAPTO C6 Tool diameter max. mm: 140 Tool weight max kg: 8 Lower turret X-axis travel mm: 195 Z-axis travel mm: 1.525 Number of tool slots St .: 12 Indexing time s: 0.28 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 22/18,5 (30min/cont) Manufacturer: KITAGAWA Maximun torque Nm: 60kN Counter spindle Speed s ...

Technical description – Terex Fuchs MHL 434 (built in 2005) Condition: Very good Operating hours: 7,800 h General information • Manufacturer: Terex Fuchs, Germany • Model: MHL 434 • Serial number: 3301400143 • Year of construction: 2005 • Areas of application: timber handling, recycling, scrap loading, port logistics Specifications • Engine: Deutz TCD 4.1 L4, 4-cylinder in-line engine • Engine power: 112 kW (EU Stage II / US Tier 2) • Displacement: 4.1 litres • Nominal speed: 2,000 rpm • Fuel tank: 293 litres • Service weight: 24,100 – 25,700 kg • Maximum radius: 10.7 m • Travel speed: up to 19 km/h (2-speed powershift transmission) • Turning radius: 5.5 m • Tyres: Twin tyres 10.00-20 16PR with tyre pressure monitoring • Hydraulic system: flow rate max. 330 l/min, working pressure 320/360 bar • Hydraulic oil tank: 270 liters Saf ...

Injectstar Vacuum tumbler Stainless, 1200L tumbler, variable speed, timer controls, with vacuum, 3Ph

– Horizontal capacity 2000 kg – Vertical load capacity 2000 kg –Hydraulic – Table size 1200 mm – Wired remote control –Digital readouts – Emergency stop 2x –Documentation – 400V

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Code: 0114 Brand: SCM MINIMAX Model: UNILEV 150 Universal sanding machine for straight and round parts , furniture, window frames , panels, doors, window frames and various Technical data: Lenght of worktables mm 1440 Tilting worktable 0-45° Motor 3,3 Kw Sanding belt width mm 150 Sanding belt lenght mm 2170 Pneumatically controlled oscillating belt Suction port diameter mm 120 Overall dimensions: mm 1440 x 720 x 1550 h Weight kg 470

Capacity: 800 tons Stroke of slider: 400 mm Number of strokes per minute 12 Adjustment of slider: 185 mm Max. daylight betwen bolster and slider SDAU: 850 mm Table area: 1250 x 1650 mm Slider dimensions 1000 x 1250 mm Main motor power: 55 kW Distance between columns 1250 mm Cushion capacity, ton 125 Cushion stroke, mm 160 Press dimensions, mm 3800 x 2800 x 6900 Weight: 77 tons

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

For sale is this hydraulic under-sink miter saw with two conveyor belts. Saw table dimensions L 800 mm x W 900 mm x H 800 mm. Conveyor belt behind the saw 1500 x 700 mm, conveyor belt in front of the saw 2500 x 700 mm, distance from the beginning of the belt to the saw 3300 mm, saw blade diameter 500 mm, max. cutting height 120mm, motor approx. 5.5 kW. The saw was completely repaired.

Usable cutting length : 4200 mm Cutting depth : 3200 mm Saw blade protrusion : 105 mm Number of collets : 7 pcs Power motor main spindle : 9 kW Diameter main saw blade : 355 mm Scoring saw blade diameter : 127 mm Feed speed Saw carriage flow : 5-60 m/min Feed speed Saw carriage return : 80 m/min Side aligner : yes Slide feed : 25 m/min Gate valve return : 60 m/min Control : Control computer Number of support tables : 4 pcs Support table design : Air cushion

Equipped for printing flexible packaging, laminates Web width max. 570 mm Print width max. 560 mm Configuration: Unwinding (Ø1000 mm, max. 350 kg) Feeding with Teknek Webclean + 2xCorona 9 printing units for flexographic printing with GEW UV incl. ink pumps on each printing unit UV tower for safe UV curing before lamination 1 MP unit (multi-purpose) for solvent- and water-based 2-component inks, varnishes, etc. incl. viscosity control Inline lamination (dry and wet lamination) Conversion Module Inspection Video 16 single die-cutter for labels with Kocher & Bech GapMaster (NB: width only 16) Retractor unit (Ø1000 mm, max. 350 kg) (on rails De/Relam for unit 1+2, 2 x towers (unwind + return) for cold foil) 17 sleeve sets for plates Everything is in excellent condition 101, 112, 126, 130, 134, 138, 140, 142, 144 17 anilox rollers in excellent condition Additional ink c ...

1 used ELB SURFACE GRINDER Model: SWBE 010 ND Grinding area: 1000 X 550 X 400 mm Year of manufacture: 12-1988 Grinding wheel: 400 X100 X 127 mm ACCESSORIES Electric straight-line dresser with compensation Digital Display Vertical Magnetic Electro Clamping Plate 1000 X 550 mm Coolant system with universal paper belt filter Grinding wheel with holder Wedges

The scope of delivery includes: 01x Reach truck Manufacturer: STILL Model name: FM-12 I Total weight: 2,150 kg Nominal load capacity: 1,200 kg Nominal Drive Power: N/A Maximum battery weight: 788 kg Battery Voltage: 48V Year of manufacture: 02/2004 Serial Number: 611878000050 Maximum lifting height: approx. 5,770 mm Operating hours: 10,478.3h Total width: tines (outside) approx. 850 mm Tine length: approx. 800 mm Battery age: 2012 Extension stretcher at depth: up to 630 mm Total height: approx. 2,460 mm Overall width: approx. 1,250 mm Total depth: approx. 1,700 mm Total depth retracted with tines: approx. 1,900 mm Total depth extended with tines: approx. 2,520 mm Battery charger, used Manufacturer: STILL Model name: ecotron memory 48V-70A Total width: approx. 550 mm Total depth: approx. 450 mm Total height: approx. 500 mm Your contact persons in our compan ...

The scope of delivery includes: 01x Reach truck Manufacturer: STILL Model name: FM-12 I Total weight: 2,150 kg Nominal load capacity: 1,200 kg Nominal drive power: 6.0 kW Maximum battery weight: 788 kg Battery Voltage: 48V Year of manufacture: 03/2007 Serial Number: 611878000365 Maximum lifting height: approx. 5,870 mm Operating hours: 0,0h Total width: tines (outside) approx. 800 mm Tine length: approx. 800 mm Battery age: 02/2022 Extension stretcher at depth: up to 630 mm Total height: approx. 2,460 mm Overall width: approx. 1,250 mm Total depth: approx. 1,700 mm Total depth retracted with tines: approx. 1,900 mm Total depth extended with tines: approx. 2,520 mm Battery charger, used Manufacturer: Richter Forklift Model name: SE48V80A Total width: approx. 500 mm Total depth: approx. 400 mm Total height: approx. 810 mm Your contact persons in our company: ...

Used spiral mixer DIOSNA, type: SP 80 D -Based on SP 120 D- This spiral mixer is a DIOSNA SP 120 D, which has mounted a bowl from the SP 80 D. Therefore, the motor is more powerful and is never used to capacity or overuse when 80 kg of dough is fully utilized. The engine is more durable. - for 80 kg of dough or 50 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 Time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - Condition: very good All parts, such as bearings, V-belts, etc. were checked. Everything is in very good condition and there is no reason for an overhaul of the machine. A video of the machine in operation can be made. The mixer is immediately ready for use. Inspection and test run are possible by arrangement.

We are selling here a flake ice maker from the manufacturer Maja, type SA 70 in a good used and functional condition. The machine runs on 230 volts, 0.53 kW, built in 2001, completely stainless steel, workshop tested, immediately ready for use, dimensions W/D/H 60/60/125 cm, others on request.

We are selling here a vacuum filler from the manufacturer Frey, type E120 in a very good used and functional condition. The machine runs on 400 volts, 120 litre hopper, LCD control, clipper connection, for filling and portioning, workshop tested, immediately ready for use, dimensions W/D/H 85/60/170 cm, others on request.

We are selling here a vacuum sealer from the manufacturer Vama, type VP 900 in a very good used and functional condition. The device was built in 2012, runs on 400 volts, 5 kW, 160 pump, with gassing, welding bar right/left, chamber size 53/53/17 cm, rollable, workshop tested, immediately ready for use, dimensions W/D/H 85/75/95 cm, others on request.

Offer 25105 Specifications: - max. working width 3050 mm - max. cutting capacity - for sheet steel 6.35 mm - 4 mm for stainless steel - 8 mm for aluminium - Adjustable cutting angle - Number of hydraulic hold-downs 14 pcs - Back gauge with positioning control AMADA 10 - 1000 mm - Front angle stop + support arm - Stroke rate 12 - 26 rpm - Pneumatic connection - Drive 400 V / 5.5 kW - Table height approx. 860 mm - Space required including back gauge, without front support arms -ca. W 3800 x H 1950 x D 2300 mm - Weight approx. 6500 kg - with: - E - foot switch - Sheet metal hold-up - Cutting length adjustment - Cut line illumination

approx. 5.500 pieces, folding box, Euro stacking container, Bekuplast, 600 x 400 x 285 mm, grey - used - : Price per item from location (net): Minimum purchase 3 pallets (min. 384 crates): only 6.-€ (net)! 9 pallets a (min. 1,152 pieces): only 5.- € (net) for complete acceptance: only 4.50 (net)! Manufacturer: Bekuplast Type: Clever-Retail-Box 56 ltr. 63843 Niedernberg Year of manufacture: unknown External dimensions: 600 x 400 x 285 mm (65 mm high when folded) Internal dimensions: 565 x 365 x 275 mm Sides and bottom closed coarsely ribbed sandwich base with welded panel in grey Colour: grey 401 Bottom: Sandwich floor Sides: closed Handles: open Material: PP-C (Polypropylene Copolymer) Industrial: Yes Weight: 2,955 kg 1 pallet packed approx. 2m high = approx. 128 crates, 1 pallet packed approx. 2.40m high: approx. 156 crates Condition: good, wit ...

Shelving (shelves and frames), Bito, different widths / heights and depths - used - : Prices per piece (net), ex location! We reserve the right to make a minimum purchase! In addition, we can offer approx. 400 pieces of bracing beams (as a replacement or alternative for clamping crosses). Price per piece 3.-€ (net)! Manufacturer: Bito Type: SV Year of manufacture: unknown Condition: good Available: immediately Location. Frankenberg Camp Shelves: Price: 7.-€ Depth 29.5cm / Field depth 30cm Width 1.30m = 2398 pieces Price: 12.-€ Depth 80cm / Field depth 80cm Width 1.30m = 23 pieces Frame: Field depth: 30cm Height 5m: 195 pieces – 30.-€ (net) / piece Field depth: 60cm Height 2m: 12 pieces – 30.-€ (net) / piece Height 2,14m: 3 pieces – 30.-€ (net) / piece Height 2,19m: 1 piece – 30.-€ (net) / piece Height 4,20m: 22 pieces � ...

Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Cutting capacity: height x width mm 380 x 750 Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensio ...

Code: 0460 Brand: CENTAURO Model: SRM GOLD LINE 5000 - CE Standard Rip saw for solid timber , wooden boards, furniture, window frames and various - CE Standard Composition: Automatic-cycle bridge sawblade guard with anti-static P.C. moving segments and built-in suction pipe Device for retractable sawblade with 3-position height choiceor Electronic programmer with measurement repeater Device for automatic slow down of cutting speed in heavy working conditions Blade feed with gear motor and three-phase inverter Max speed limiter with potentiometer Sliding control panel 2-speed fence movement (fast/slow) Two-handed safety electrical control Widia sawblade diameter 550 mm Laser unit complete with support and guard Cutting length mm 5320 Cutting width mm 600 Cutting height mm 160 Blade diameter mm 550 F 30 Blade motor Hp 15 Blade feed motor with inverter Hp 2 Va ...

Shaking table FKS JL-350 Paper size min. 125 x 176 mm Paper size max. 320 x 450 mm Art.Nr. PS2331 (L923)

Machine Details Stock-No. 1105-04059 Type of machine Machining Center - Vertical Make HURON Type KX 8 Year of manufacture 2001 Type of control CNC Storage location HAGUENAU FRANCE Country of origin FRANCE Delivery time IMMIDIATELY Freight basis EX WORKS Price Technical details x-travel 700 mm Y-Travel 600 mm Z-Travel 450 mm Feed speed x,y,z; 0 - 24 m/min. surface area 1250 X 700 mm table load 1 t spindle turning speed - stepless 24000 rpm power capacity at 100 % load 20 kW Spindle Taper HSK 63 Spindle diameter 90 mm tool change unit 20 places; distance between columns 800 mm control SIEMENS 840 D Additional information VERY NICE MACHINE CONTROL siemens 840 d SPINDLE RPM 24000 new in 2024 hsk 63 MAGASIN 20 TOOLS hsk 63 COOLING TROUNG THE SPINDLE

Machine Details Stock-No. 1105-04032 Type of machine Vertical Turning Machine Make INDEX Type V 160 C Year of manufacture 2005 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis ex site Price Technical details turning diameter 250 mm swing diameter 300 mm turning height 210 mm control SIEMENS 840 D Travel -X Axis 490 mm Travel -Z AXIS 260 mm external spindle dia. In forward position 110 mm turning speed range - spindle 5000 rpm Turret (X-Stations) 12 weight of the machine approx. 7.3 t dimensions of the machine approx. 3.2 x 2.3 x 2.3 m Accessories Chip conveyor Coolant system Additional information CONTROL SIEMENS 840 D WHIT TURRET 12 POSITION VDI 30 AND 2 FIXED TOOLS SUPPORT EXTR MOOWING TOOLS AND C AXIS WITH LOADING AUTOMATION

Machine Details Stock-No. 1105-04039 Type of machine Machining Center - Universal Make DMG Type DMU 70 EVOLUTION LINEAR Year of manufacture 2008 Type of control CNC Storage location FRANCE Country of origin GERMANY Delivery time IMMEDIATELY Freight basis EX WORKS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm revolutions per minute 18000 rpm spindle taper ISO SK 40 control HEINDENHAIN ITNC 530 chip conveyor YES kW total power requirement 50 kW weight of the machine approx. 11 t Additional information VERY NICE MACHINE COOLING TRONG THE SPINDEL 40 BAR HP CHIP CONVOYER HSK 63 MAGASIN 120 TOOLS CTXS TROUGHT THE SPINDLE 40 BARS

Stock-No. 1105-04027 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER Type CTX 420 LINEAR Year of manufacture 2003 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time available at short notice Freight basis ex Showroom Technical details turning diameter 320 mm turning length 600 mm turning diameter 320 mm control Siemens 840D Travel -X Axis 260 mm Travel -Z AXIS 635 mm swing diameter 680 mm swing diameter over slide rest 365 mm Spindle Bore Diameter 87 mm Turret (X-Stations) 12 Mainspindle Speed 5000 1/min Rapid Traverse X + Z AXIS 24/30 m/min drive capacity - spindle motor 21 kW connected load 40 kVA dimensions 4.32 x 1.72 x 1.77 m Additional information CONTROL SIEMENS 840D 4 AXIS MACHINE WITH Y AND C AXIS AND SOME LIVE TOOLS INCLUD WITH SHOP TOWER NICE MACHINE WITH LINEARTECHNIK

Machine Details Stock-No. 1105-04060 Type of machine CNC Lathe Make MONFORTS Type DNC 5 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis ex works Price Technical details turning diameter 520 mm turning length 600 mm control Siemens type 840 C Spindle Passage 85 mm Spindle diameter 130 mm swing diameter 560 mm Tool changer 12 Tool changer 12 turning speeds 32-4000 rpm weight of the machine approx. 13 t dimensions of the machine approx. 4.5x5.5x2.1 m Additional information Machine is equipped with a counter spindle. lots of accessories CNC SIEMENS 840 C

Machine Details Stock-No. 1105-04041 Type of machine Machining Center - Vertical Make LID MAHO DMG Type DMC 635 V Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis EX WORK Price Technical details X-Travel 635 mm Y-Travel 510 mm Z-Travel 460 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid motion -longitudinal/cross/vertical 30 m/min No. of Tools in Magazine 20 workpiece diameter at full load 80 mm wotkpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg table load 600 kg spindle drive 9 / 11 kW control HEIDENHAIN TNC 530I total power requirement 30 kVA Additional information cnc HEIDENHAIN I TNC 530 MAGSIN POSITIONS 32 SK 40 El ...

Machine Details Stock-No. 1105-04054 Type of machine CNC Lathe Make MAZAK Type SQT 30M x 1000 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free on truck Technical details turning diameter 410 mm turning length 1000 mm control MAZATROL T PLUS turning speeds 3500 rpm Automatic tool changer 12 pcs. weight of the machine approx. 6.5 t dimensions of the machine approx. 3.5 x 2.2 x 2.2 m Additional information GOOD ROBUST MACHINE WITH C AXIS LIVE TOOLS TAILSROCK CHIP CONVOYER

Machine Details Stock-No. 1105-04033 Type of machine CNC Turning- and Milling Center Make DMG MORI Type CTX beta 800 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight basis ex site Technical details turning diameter max. 390 mm turning length 800 mm control Sinumerik 840D sl Siemens Greates Pass Round Over Bed 700 mm Turning Speed Range - Main Spindle 20 - 4,000 min/-1 Power capacity - main spindle 45 / 35 kW max. torque 700 Nm C-Axis 360° Spindle Nose 220H5 Chucking diameter - mm max. bar capacity 102 mm number of toolpositions 12 pos. Number of driven toolspositions 12 pos. power capacity driven tool-stations 14.2 kW Spindle speed - driven tool stations 40 - 10.000 min -1 tool taper VDI 40 DIN69880 max. torque 34 Nm X-AXIS 290 mm Z-AXIS 800 mm rapid traverse X: 30 / ...

Machine Details Stock-No. 1105-04046 Type of machine Machining Center - Vertical Make HAAS Type VF 2 SSYT Year of manufacture 2023 Type of control CNC Storage location LAGER Country of origin USA Delivery time immediately Freight basis ex works, loaded on truck Price Technical details X-Travel 762 mm Y-Travel 508 mm Z-Travel 568 mm table surface area 914 X 356 mm spindle taper SK 40 max spindle turning speed range 12000 rpm Rapid Traverse 35 m/min control HAAS ATC 24 Pos. table load 680 kg spindle drive 22 kW total power requirement 35 kW weight of the machine approx. 4.5 t dimensions 3.55 x 2.4 x 2.72 m Additional information NICE MACHINE WITH ROBOT FANUC 12000 RPM TOOL EYES PROBE PARTS SAMPLE VERY NICE FROM 2023 Accessories: electronical hand wheel, 1 tool fixture, chip conveyor, coolant

Machine Details Stock-No. 1105-03747 Type of machine CNC Lathe Make HARDINGE Type GS 200 MSY Year of manufacture 2007 Type of control CNC Storage location FRANCE Country of origin JAPAN Delivery time immediately Freight basis EXW -free on truck Technical details turning diameter 500 mm turning length 540 mm control FANUC 18 TB Greates Pass Round Over Bed 380 mm centre distance 600 mm X-Travel Plan Top 210/ mm Z-Travel longitudinal 520 mm Spindle Bore 45 mm turning speeds 3500 rpm total power requirement 21 kVA weight of the machine approx. 5 t Additional information equipment: CNC Fanuc 18 TB with 1 chuck + SUP SPINDLE 1 star turret with 12 tool stations vdi 40 c axis + live tools + Y AXIS LOT OFF TOOLS BAR FEEDER LNS QUICK LOAD SERVO Coolant Basin, Measuring Arm Swarf Conveyor transformer (L:1,0xB:0,46xH:0,86m) machine can be demonstrated under power ...

A-IN INPUT VOUCHER RS - 12404597

I/01 MODUL CAMBUS RS - 12404585

I/01 MODUL CAMBUS RS - 12404584

I/01 MODUL CAMBUS RS - 12404583

I/01 MODUL CAMBUS RS - 12404582

I/01 MODUL CAMBUS RS - 12404581

STEP-TRIGGERING CARD RS - 12404591

STEPPER RS - 12470917