used 12 for sale

BIGLIA B658 CNC turning center was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for precision machining of workpieces with a maximum diameter of 380 mm, has, among others, a 12-position turret, a reliable spindle and an automatic tailstock. All process parameters, in turn, are programmed in an intuitive FANUC CNC control with many useful functions that facilitate the daily operation of the machine. The BIGLIA B 658 CNC lathe weighs 6000 kg. Technical specifications of the BIGLIA B658 lathe - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000 rpm - spindle bore diameter: 90 mm - spindle centre height: 1055 mm - front bearing inner diameter: 130 mm ...

TRUMPF TruLaser 3060 laser cutting machine was built in 2007 in Germany by TRUMPF Werkzeugmaschinen Teningen GmbH. The machine, distinguished by its excellent precision and high productivity, is used for machining workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a power of 4 kW and a thickness of only a few μm, which is generated by a reliable laser source with the highest energy efficiency. The automatic pallet exchange system, in turn, allows simultaneous loading and unloading during the cutting process, reducing machine downtime to a minimum. The offered TruLaser 3060 laser cutting machine also features a number of state-of-the-art technical solutions that significantly affect the cutting quality and expand the machine’s machining capabilities. This includes, for example, the ControlLine distance measuring system, which ...

EHT TRUMPF TruBend 8230-40 CNC press brake was built in 2007 in Germany by EHT Werkzeugmaschinen GmbH (now Trumpf Werkzeugmaschinen Teningen GmbH). The machine, distinguished by its high productivity and excellent precision, is used for the economical machining of workpieces with a maximum length of 4050 mm. The rigid, internally stress-free design combined with a press force of 230 tonnes ensures excellent bending results, even during the most demanding challenges. The operator, in turn, has at his disposal a convenient foot switch and an intuitive CYBELEC CNC control, in which advanced machining programmes are created in just a few steps. The TRUMPF TruBend 8230 CNC hydraulic press brake weighs 18100 kg. Technical specifications of the EHT TRUMPF TruBend 8230-40 press brake - CNC controller: CYBELEC ModEva 10S - number of axes: 5 (X, X1, R, Z1, Z2) - maximum press force: 230 t (2 ...

OZGENC MAKINA SL 500 automatic circular sawing machine was built in 2021 in Turkey by M.S.K. MOTOR KOMP. MAKINA SAN. TIC. LTD. ŞTI. The machine was specially designed for precision cutting of aluminium profiles at an angle of 90°. The entire machining process, from feeding the material to receiving the finished part, is performed fully automatically. The workspace includes, among others, a two-sided clamping system and a high-quality diamond saw with a diameter of 500 mm, the feed of which is regulated by reliable servomotors. The saw is continuously sprayed with coolant in order to increase the cutting quality and extend the operating time. The offered OZGENC MAKINA aluminium sawing machine is also very easy to operate. The touchscreen operator panel with PLC control provides the user with the necessary information, as well as the ability to quickly configure work programmes. The tota ...

CORMAK LF3015LNR laser cutting machine was built in 2021 by the Polish company CORMAK. The machine, which is designed for precision cutting of tubes, sheets and profiles, uses advanced FIBER technology to machine even the hardest materials of various thicknesses. This technology is a much more cost-effective alternative to CO2 machines of similar power, while also guaranteeing low operating costs and trouble-free operation for many years of use. The workpieces are machined with a reliable RAYTOOLS cutting head with autofocus and protective glass. It moves along a sliding gantry made of aircraft aluminium. The installed software automatically adjusts the focus lens from -10 mm to +10 mm, ten times faster than standard manual adjustment. Both the collimator lens and the focus lens are equipped with a heatsink to reduce the temperature of the cutting head and thus extend its service life ...

WDE MASPELL TVS ROLL 1.8 E 8 L vacuum kiln was built in 2015 by the Italian company WDE MASPELL S.r.l.. The machine is used for the heat treatment of solid wood, in the form of planks or pre-cut pieces with a maximum length of 8 metres. The innovative vacuum technology, compared to traditional methods of impregnating wood, reduces treatment times by up to 50%, while also reducing emissions of harmful substances into the environment. High temperature combined with vacuum improves the intrinsic properties of the wood by changing its chemical structure. As a result, the wood elements take on a very dark colour and, most importantly, become harder and more resistant to external influences, i.e. moisture or fungi. The TVS ROLL 1.8 E 8 L vacuum wood dryer is also suitable for fumigation, i.e. the process of insect removal. All thermal processes are optimised for maximum heat utilisation. Th ...

OMERA OPI 250 double column press was built in 2000 in Italy by OMERA S.r.l. The machine, designed for, among others, precision stamping, bending and punching, is the perfect solution for the mass production of parts from sheet metal and strips. All these machining operations are performed by a large-area slider operating at a force of 250 tonnes. The compact, rigid gantry design significantly reduces deflection under full load, as well as allows for operation with advanced punches and dies. The equipment also includes pressure cushions and SICK light curtains, which automatically switch off the machine’s power supply if the laser beam is interrupted. The OMERA OPI 250 NF/2 press weighs 24000 kg. Technical specifications of OMERA OPI 250 hydraulic press - maximum press force: 250 t (2500 kN) - maximum pressure cushion force: 100 t - minimum pressure cushion force: 10 t - work ta ...

DMG MORI CMX 70 U CNC machining center was built in 2018 in Poland by FAMOT Pleszew Sp. z o.o.. The machine, designed for precision five-axis workpiece machining, is distinguished by the use of reliable components and modern technical solutions. Supported at 4 points, the cast mineral bed, perfectly dampens any vibrations while ensuring proper heat extraction from the workspace. Inside the machine’s large, fully illuminated workspace, there is, among others, a tilting rotary table, a 30-position tool magazine and a reliable spindle with an optimum speed range. In turn, the linear axes (X,Y,Z) use a direct measuring system in the form of measuring scales to achieve the best accuracy and repeatability. All this is complemented by a touchscreen operator panel with intuitive SIEMENS CNC control. All these technical solutions, combined with the extensive range of equipment, guarantee uninte ...

AVIA VMC 1000 CNC machining center was built in 2017 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A.. The machine, distinguished by its extensive machining capabilities and state-of-the-art technical solutions, will meet any, even the most demanding challenges. Workpieces with a maximum weight of 1000 kg are machined by an extremely fast spindle with thermo-stabilisation, which, combined with precision cutting tools, guarantees excellent milling results. On the other hand, the machine’s high-quality construction with sliding doors offers maximum stability in machining by effectively eliminating any vibrations generated during milling. The AVIA CNC vertical machining center is offered with an extensive range of equipment, including toolholders, digital axis servo drives and the intuitive SIEMENS numerical control with ShopMill 3D overlay. The total weight of the machine is 5300 k ...

DECKEL MAHO DMU 60P CNC machining center was built in 1999 in Germany by DECKEL MAHO GmbH. The machine with its extremely sturdy construction was designed for the most intensive 5-axis workpiece machining. Inside the large working area, there is, among others, a 24-position tool magazine and an electro-spindle, which rotates at a maximum speed of 12000 rpm. All of this is complemented by an advanced HEIDENHAIN CNC control with an intuitive interface, where machining programmes are created in just a few steps. The DECKEL MAHO milling center has had only one owner to this date. Technical parameters of the DECKEL MAHO DMU 60P milling center - number of axes: 5 - feed in the X/Y/Z axis: 600/650/550 mm - maximum electro-spindle rotational speed: 12000 rpm - minimum electro-spindle rotational speed: 20 rpm - electro-spindle drive power: 15 kW - tool holder: SK-40 - operating hours: 7 ...

HAAS ST-30 CNC turning center was built in 2012 by the renowned American brand HAAS AUTOMATION INC. The machine, designed for precision machining of workpieces with a maximum diameter of 381 mm, is equipped with among others a 12-position turret, a reliable spindle and a 254 mm chuck. The compact design and the emphasis on high turning productivity and precision make the machine an excellent choice for any industrial facility. So far, the machine has mainly been used for machining aluminium castings and has been serviced on a regular basis. The HAAS CNC lathe weighs 4944 kg. Technical parameters of the HAAS ST-30 lathe - CNC controller: HAAS - maximum turning diameter: 381 mm - maximum turning length: 826 mm - maximum part deflection: 533 mm - maximum bar diameter: 76 mm - feed in the X/Z axis: 239/826 mm - rapid traverse in X,Z axis: 24 m/min - maximum spindle rotational spee ...

FULLTONTECH TBF6111B horizontal boring machine was built in 2022 in China by Dalian Fullton Machinery Co., Ltd. The machine enables a number of complex operations to be performed, i.e. precision drilling, milling and boring, on workpieces with complex geometries and heavy weights. All these operations are performed on a stable work table, whose rotary design enables the workpiece to be machined from all 4 sides. The spindle, rotating at a maximum speed of 1000 rpm, runs on induction-hardened guideways with scrapers. The spindle has a special safety clutch which prevents the machine from being overloaded. A powerful hydraulic system, consisting of two parts, is responsible for changing the spindle speed and feed rate. The position of the head in all linear axes is in turn controlled by a NEWALL digital readout, which provides a measurement accuracy of 0.005 mm. The FULLTONTECH boring m ...

STILL EXV-SF 14 electric pallet stacker was built in 2023 by German company STILL GmbH. This extremely versatile vehicle allows you to control the flow of goods in your warehouse, from transporting loads in the goods receiving area to handling high-bay racks. The maximum load capacity of 1400 kg, combined with the intelligent speed reduction in corners, ensure maximum safety in transporting loads in even the most confined spaces. When the stand-on platform and side lateral protection arms are extended, the maximum speed without load can reach up to 10 km/h. The machine’s structure has been designed for maximum operator comfort. The pneumatically cushioned stand-on platform, which can be adjusted to the operator’s weight, protects the back from strain over long distances. Precise controls have been adapted to both right- and left-handed operators. On top of this, the operator has a ...

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

LVD Siena strippit 1212 punching machine was built in 2005 in Belgium by LVD Group NV. Designed for machining steel and aluminium sheets, the machine is an excellent choice for both unit and batch production. Reliable components with excellent performance, combined with a compact design based on a one-piece frame, ensure that the SIENA 20 1212 punching machine delivers excellent precision and machining quality for many years of use. The capacious, 27-station turret with 3 auto-index stations and MultiTool support offers a wide variety of machining options and a high level of flexibility. Precision tools punch metal sheets with a force of 20 tonnes on a large brush table, which protects the surface of the workpiece from scratches and scrapes, while increasing the quality of machining. All of this is completed by the GE FANUC CNC control with its unique Smart Stroke function for automat ...

HYDRASAN 350 T hydraulic press was built in 2007. There are 2 such machines available for sale. Technical specifications of the HYDRASAN 350 T press - maximum press force: 350 t - lower work table surface area (L x W): 1300 x 420 mm - movable table stroke: 300 mm - distance between tables: 400 mm - approach speed: 4.8 mm/s - return speed: 5.1 mm/s - piston diameter (cylinder internal diameter): 230 mm - directional control valve: REXROTH 4WE 10 G33/CG24N9K4 - pump flow rate: 40 l/min - oil tank capacity: 120 l - hydraulic oil gauge: PAKKENS - working pressure: 230 bar - manostat: REXROTH HED 80A 20/350 - electric motor power: 5.5/11 kW - electric motor rotational speed: 1450 rpm - power supply: 380 V; 50 Hz - dimensions of the HYDRASAN machine (L x H): 1800 x 2200 mm

FMB JUPITER band saw was manufactured in 2000 in Italy by FMB s.r.l.. The machine, designed for precision cutting of workpieces, is an indispensable tool in any production facility. The machining process is performed fully automatically by means of a high quality 3180 mm long saw blade, which is driven by a powerful electric motor with an stepless gearbox and transmission wheel. The robust design also eliminates any vibration generated during machining, guaranteeing exceptional stability, even during the most intensive production work. In 2024, the FMB automatic band saw underwent an upgrade, during which the control panel was replaced with a new one. The FMB JUPITER bandsaw weighs 1150 kg. Technical data of the FMB JUPITER metal band saw - cutting angle: 0°-60° - cutting capacity (0⁰, circle): 240 mm - cutting capacity (0⁰, square): 240x240 mm - cutting capacity (0⁰, rect ...

TRUMPF TruLaser 5030 L68 fiber laser was built in 2017 in Germany by Trumpf GmbH + Co. KG. The machine, designed for precision machining of sheet metal made of structural steel, stainless steel and aluminium, is offered with state-of-the-art components and extensive equipment. These include a resonator with the highest energy efficiency, which generates a stable 3 kW fibre optic beam. The mobile, adaptive lens system located in the universal cutting head ensures optimum beam geometry for different sheet thicknesses and materials, resulting in the highest cutting quality at maximum feeds. In addition, special systems incorporated in the machine allow for the machining of waste material. The laser power is regulated analogously to the feed rate on the advanced SIEMENS SINUMERIK 840D SL CNC control. What’s more, the workshop programming integrated into the control system allows program ...

MECHANIC SYSTEM GM6VW industrial air filtration system was built in 2014 in Poland by Mechanic System Sp. z o.o. The machine is used in air filtration from dry impurities generated during various technological processes. Thanks to the use of patron filters with a large filtration area, the machine achieves an efficiency of up to 99.999% in class M, enabling recirculation of cleaned air back to the production hall. Dust accumulated on the surface of the patron filters is cleaned automatically by pulses of compressed air during machine operation. Moreover, the vertical positioning of the filters increases their vitality and significantly reduces operating costs. The MECHANIC SYSTEM GM 6VW dust collector has a fan installed directly on the filter chamber and is offered together with a controller and existing piping. Technical specifications of the MECHANIC SYSTEM GM6VW dust extraction un ...

3DYY 9-12PLC rotary transfer machine manufactured in 2020 in China by Zhejiang Mingwen Machine Tool Co., Ltd is designed for high-volume production of e.g. sanitary, gas and hydraulic fittings. The machine, which combines the features of several metal-working machines, performs sequential machining operations on parts placed in special holders, i.e. milling, threading and drilling, in just one working cycle. The finished parts, i.e. fittings, couplings and extensions, are distinguished by their high quality. In this way, the 3DYY9-12PLC transfer machine generates considerable savings, as well as ensuring production efficiency, thanks to its speed and flexibility. The multi-spindle machining center has so far been used to machine 1/2″ internal and external threads from fi 24 x 6k14 brass rod. It took less than 4 seconds to produce 1 external thread. The total weight of the machine is ...

STIGAL VXstandard plasma cutting machine, manufactured in 2010 in Poland, is used for precision cutting of workpieces with a maximum thickness of 57 mm. The open design with a very robust portal enables free sheet metal loading and guarantees exceptional stability during even the most demanding challenges. The entire workspace is covered by an extraction table with the ECTS system, which effectively levels the contamination generated during machining and ensures comfortable working conditions. All of this is complemented by an intuitive CNC control installed in the operator’s touchscreen control panel, allowing for machine control and control of all cutting process parameters. The STIGAL plasma cutting machine has also been retrofitted with an OB-R 400 rotator, which extends the machining range to tubes with diameters from 40 to 400 mm. Technical specifications of STIGAL VXstandard  ...

BATTENFELD TM 1300 injection moulding machine was built in 2004 in Austria by BATTENFELD GmbH. The machine is used for the economical mass production of plastic parts of various colours, shapes and sizes. The workpieces are produced using the injection moulding method, in which plasticised plastic is fed into a mould and then closed with high press force. In order to achieve parts with high repeatability and durability, the machine uses many reliable components with excellent parameters, including a high-precision mould clamping system operating at a force of up to 130 tonnes. All this is complemented by the intuitive UNILOG B4 CNC control with its many useful functions, which allows programming of the operating modes in just a few steps. The TM 1300 injection moulding machine weighs 7000 kg. Technical specifications of the BATTENFELD TM 1300 injection moulding machine - CNC controll ...

DURMA VN 2006 hydraulic corner notching machine was built in 2016. The machine, equipped with state-of-the-art solutions and reliable components, is designed for machining workpieces made of plain and alloy steel with a maximum thickness of 6 mm. The machining process is performed on a robust, machined table with T-slots for fast and accurate tool positioning. Thanks to the automatic adjustment of the blade, high quality of material notching is achieved with the correct gradation and straightness of the cutting edge. The cutting angle is adjustable from 30° to 140° using knobs located on both sides of the machine. The three upper and four lower hydraulic cylinders in turn ensure that accurate and repeatable notching is achieved. The VN 2006 corner notching machine weighs 950 kg. Technical specifications of the DURMA VN 2006 corner notching machine - maximum workpiece thickness (60� ...

KASTO HBA 1060/1260 AU metal band saw built in 1995 in Germany is used for precision cutting of round, square and flat workpieces. The robust design in combination with the reliable 11400 mm long saw blade allows fully automatic cutting of even the hardest materials, i.e. titanium, at a constant 90° angle. Machining is free of any vibration and oscillation, resulting in exceptional process stability during even the most intensive tasks. The KASTO dual-column band saw weighs 19000 kg. Technical data of the KASTO HBA 1060/1260 AU bandsaw - NC controller - cutting capacity at 90° (round): ⌀ 1060 mm - cutting capacity at 90° (square): 1060 x 1060 mm - cutting capacity at 90° (rectangle): 1260 x 1060 mm - cutting speed: 16-80 m/min - work table dimensions (L x W): 2500 x 1250 mm - maximum workpiece weight: 20 t - material feed length: 2100 mm - saw blade dimensions: 11400 x  ...

YCM FP100A CNC machining center was built in 2014 in Taiwan. Equipped with state-of-the-art technology and components from renowned brands, the machine is used for precision 3D machining of heavy workpieces weighing up to 1000 kg. During machining, the reliable spindle built in IDD (Isolated Direct Drive) technology moves on roller guides from Japanese company IKO, which minimises the effects of bending torque and also ensures high positioning accuracy. In addition, the use of precision ceramic bearings guarantees quiet operation and long life of the spindle. The FP100 A milling center is offered with a comprehensive range of equipment, including a 30-position magazine with automatic tool changing and an intuitive CNC control by HEIDENHAIN. The controller’s excellent optimisation and multitude of functions significantly simplify operation and enable advanced machining programmes to  ...

BLM-ADIGE JUMBO LT14 tube laser cutting machine was built in 2014 in Italy by BLM S.p.A. The machine’s high versatility and extensive machining capabilities make it the perfect choice for precision machining of tubes, open profiles, I-beams and special profiles of large dimensions. It will significantly reduce the cost of producing a single component and improve the quality of cutting compared to other technologies available on the market. The BLM-ADIGE LT JUMBO 14 3D tube laser cutting machine performs machining fully automatically, without the need for retooling or manual adjustments. Once the workpieces have been fed in, the loading unit with conveyor system segregates them according to cross-section, diameter and length. The workpiece is then moved towards the work area, where it is held by three special spindles that eliminate uncontrolled movements and guarantee more precise,  ...

ATMSolutions ATMS 1325 CNC milling machine built in 2017 in Poland is designed for the production of both small and large parts made of e.g. aluminium, plastic or wood. Distinguished by its state-of-the-art solutions, the machine performs the machining process on a large vacuum table using a powerful, water-cooled spindle. The steel frame, by increasing the overall rigidity, makes it possible to achieve unprecedented precision and accuracy in machining, removing any vibration and deformation. In addition, the X and Y axes are equipped with trapezoidal guides with gear drives with bevel teeth, thanks to which excellent dynamics and feed repeatability are achieved. This is complemented by an intuitive CNC control with professional CAM software that supports G-CODE and .nc commands. The ATMS 1325 CNC milling machine weighs 1000 kg. Technical specifications of the ATMSolutions ATMS 1325 m ...

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

AVIA AVIATURN 35 CNC turning center was built in 2022 in Poland. The machine, designed for precision machining of workpieces with a maximum diameter of 350 mm, has been equipped with many state-of-the-art solutions and high-quality components that ensure excellent turning results. The workspace includes, among others, a 12-position turret and a reliable spindle driven by a belt drive with encoder. The AVIAturn 35 CNC lathe is also distinguished by its richly ribbed, single-piece cast iron bed. The bed, which is inclined at 35°, effectively dampens all vibrations and oscillations, resulting in, among others, improved workpiece surface quality and increased cutting tool life. The machine’s extensive equipment includes, among others, a hydraulically movable tailstock, a tool probe and a SIEMENS CNC control in its most powerful version with a wide range of built-in fixed cycles and 16  ...

HAAS UMC-750SS CNC vertical machining center built in 2018 in the United States is used for precision machining of complex workpieces with a maximum weight of 300 kg. The machine features a large work area which includes a direct-drive spindle, a 500 mm diameter rotary tilting table with a precision pilot hole and a measuring probe from the renowned RENISHAW brand. In addition, each tool taken from the 40-position magazine is continuously measured to ensure continuity of the machining process. The UMC-750SS CNC machining center is offered with extensive equipment, which includes e.g. a belt chip conveyor and a perfectly optimised HAAS NGC CNC controller with many useful functions. To this date, the machine has run a small amount of time and has been used for prototyping, tooling production and small batch machining. The HAAS UMC 750 SS milling center weighs 8200 kg. Technical speci ...

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center has only been in operation for 3 minutes so far. The total weight of the machine is approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 7 ...

YCM FP66A CNC machining center was built in 2013 in Taiwan. The machine, equipped with components from renowned brands and state-of-the-art technology, is used for precision 3D machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a powerful spindle, rotating at a maximum speed of 16000 rpm, and cutting tools taken from a 30-position magazine. The spindle moves in the X,Y,Z axis on roller guides of the Japanese company IKO with ball-and-screw systems, directly driven by digitally controlled servomotors. This solution ensures high positioning accuracy and repeatability over a long period of use. The FP66 A CNC vertical machining center also features a high-quality cast-iron gantry structure, which, correlated with the extra-wide base resting on the ground, minimises the effects of bending torque resulting from the hanging mass of the spindle. Th ...

BOEHRINGER VDF DUS 1000 CNC lathe was built in 1993 in Germany. The machine, designed for machining workpieces with a maximum diameter of 1000 mm, delivers excellent turning results during even the most intensive challenges, thanks to its extremely stable design and reliable components. The spindle is driven by an stepless AC motor, which allows efficient turning in two different, optimally adapted speed ranges. All axes, on the other hand, have powerful servo drives, guaranteeing excellent dynamics and positioning accuracy throughout the machine’s lifetime. This is rounded off by an intuitive SIEMENS CNC control with many functions for easy operation and programming. The BOEHRINGER VDF 1000 DUS lathe weighs approximately 10100 kg. Technical specifications of BOEHRINGER VDF DUS 1000 metal lathe - turning diameter above the bed: 1000 mm - turning diameter over transverse slide: 710 ...

XYZ SMX 5000 CNC bed milling machine was built in 2016 in the UK. The machine for precision machining of workpieces with a maximum weight of 850 kg is made from a uniform cast iron, which guarantees excellent rigidity and stability during even the most intensive machining. The enclosed workspace includes a large work table with a length of 1930 mm and a width of 355 mm, a reliable spindle and a tilting work head. All this is complemented by a CNC control with integrated CAD functions, which significantly simplifies everyday machining. The XYZ Machine Tools SMX 5000 CNC milling machine weighs 3570 kg. Technical specifications of the XYZ SMX 5000 milling machine - feed in the X/Y/Z axis: 1500/600/580 mm - rapid traverse in X,Y,Z axis (CNC): 6.3 m/min - rapid traverse in X,Y,Z axis: 3.8 m/min - work table dimensions (L x W): 1930 x 355 mm - maximum workpiece weight: 850 kg - number ...

Optical separator, Brand: Ecorema, Model: Aisorter X-1200, Year: 2020, Power: 4500 W

- Brand: Silmisa - Model: MSA300-1260 (750)2. - With hydraulic pusher - Working width: 1260 mm - Engine: 75 hp (55 kw) - Year: 2007 - With electrical panel

- Cutting chamber: 800x1200 mm. - With hydraulic pusher - Socket: 40x40mm - Engine: 40 hp (29.42 kW)

- Cutting chamber: 800x1200 mm. - With hydraulic pusher - Socket: 40x40mm - Engine: 40 hp (29.42 kW)

- Cutting chamber: 800x1200 mm. - With hydraulic pusher - Socket: 40x40mm - Engine: 40 hp (29.42 kW)

Grinder Mill with Blades Brand: Eurotecto, Model: ME75 . With a 780 X 420 cutting chamber with stepped closing rotor, with a 75 hp (55.12 Kw) water-cooled motor. Hopper and hydraulic grill opening. With electrical panel.

- Brand: Herbold - Model: HV-30 - Year: 2006 - No electrical panel. - Composed of: 1. Feeder silo with bag filters. 2. HU30 agglomerate with 75/90 kW (102/122 hp) motor. 3. MFT 35/450 7.5 kW (10.2 HP) transport vacuum cleaner. 4. Cyclone windbreaker and MFT 30/300 vacuum cleaner with 4 kW (5.4 hp). 5. Reshredding mill. Brand: Herbold, Model: SML 30/50-53-2, Motor: 11 kW (14.8 hp). 6. MFT 18/180 type 1.5 kW (2 HP) transport vacuum cleaner. 7. Fines separation system with 2.2 kW (3 HP) vacuum cleaner with cyclone and return of fines to the main silo.

We offer this powerful single-shaft ripper specially designed for the primary shredding of plastic materials, textiles, wood or industrial waste. Equipped with an 800x1200 mm cutting chamber, a 40x40 mm socket and a robust 40 hp (29.42 kW) motor, this equipment ensures efficient and continuous cutting. Thanks to its integrated hydraulic pusher, the material is fed with constant pressure into the rotor, optimizing performance and preventing jamming. It is ideal for processes prior to granulation, recycling or volume reduction. Specifications: ✅ Type: 1-Shaft Ripper ✅ Cutting chamber: 800 x 1200 mm ✅ Main engine: 40 hp (29.42 kW) ✅ Hydraulic Pusher: Included ✅ Cutting socket: 40 x 40 mm ✅ Robust structure and easy maintenance Common Applications: Shredding of hard and soft plastics Preparation of waste for recycling Volume reduction of industrial material ...

With a 780 X 420 cutting chamber with stepped closing rotor, with a 75 hp (55.12 Kw) water-cooled motor. Hopper and hydraulic grill opening. Without electrical panel.

1 shaft ripper Brand: Silmisa, Model: MSA300-1260 (750)2. With hydraulic pusher, working width: 1260 mm, engine: 75 hp (55 kw), year: 2007. With electrical panel.

- With hydraulic pusher - Year: 2004 - Engine: 75 hp (55 kW) - Hopper dimensions: 1118 x 1990 mm - Cutting chamber: 1200 x 370 mm -Rotor: Orbit diameter: 370 mm Cutting speed: 1500 rpm Num. blades: 26 -52 (variable depending on the material to be treated) - With 3 sets of grille: Ø20, Ø30,Ø35 mm - Spare gearbox - Extra hopper 3000 x 2200 x 1600 (height) mm

Professional Grade Powder Device with Vibration Table Analog control, like new and 12 filters for powder booth in high industrial quality (extra price)

TECHNICAL DETAILS X-axis travel:710 mm Y-axis travel:520 mm Z-axis travel:520 mm Rapid traverse X-axis:30 m/min Y-axis rapid traverse:30 m/min Rapid traverse Z-axis:30 m/min X-axis feed speed:10 m/min Y-axis feed speed:10 m/min Z-axis feed speed:10 m/min Overall height:3,300 mm Overall length:4,600 mm Overall width:5,500 mm Total weight:6,000 kg Spindle speed (min.):20 rpm Spindle speed (max.):12,000 rpm Spindle motor power:25,000 W Input voltage:400 V Type of input current:three-phase Work table length:700 mm Worktable width:500 mm