used 12 for sale

OKUMA MA-50 HB CNC horizontal machining center was built in 2000 by the Japanese corporation OKUMA. The machine, designed for advanced machining of workpieces with a maximum weight of 800 kg, is distinguished by its high reliability, efficiency and precision. The machining process is performed fully automatically by means of a high-speed spindle and cutting tools taken from a 40-position magazine. What’s more, the automatic pallet exchange system allows for simultaneous loading and unloading of workpieces during the machining process, reducing machine downtime to a minimum. The MA-50 HB CNC machining center is offered with extensive equipment, including among others a rotary table and an advanced CNC control with an intuitive interface. The total weight of the machine is 21000 kg. Technical specifications of the OKUMA MA-50 HB CNC milling machine - feed in the X/Y/Z axis: 700/800/7 ...

TBI TC 200-65 MC CNC turning center was built in 2015 in Taiwan by TBI Technology Ltd. The machine, distinguished by its high reliability and extensive equipment, was created as an effective answer to the needs of even the most demanding customers. Workpieces with a maximum diameter of 500 mm are machined inside a large, fully illuminated workspace using a powerful spindle and tools taken from a 12-position turret. Daily work, in turn, is facilitated by a FANUC CNC control with the innovative MANUAL GUIDE workshop programming tool, which reduces the time between drawing up the technical drawing and the actual production of the workpiece. The offer also includes, among others, a hydraulic tailstock and an automatic tool measuring probe. The TBI TC 200/65 MC metal lathe weighs 3200 kg. Technical specifications of the TBI TC 200/65 MC CNC lathe - maximum turning diameter: 210 mm - maxi ...

InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...

KT7 CNC KVPG 150-300 VOLCUT plasma cutting machine was built in 2020. This extremely powerful machine is the perfect choice for precision cutting of workpieces with a maximum thickness of 50 mm. This is all due to the use of a number of innovative technologies that significantly improve the production processes with maximum ease of operation. The sheets are machined on a water or other coolant-filled water table by means of two torches (an oxygen torch and a plasma torch). Each torch is equipped with a special TSC (Torch Sensor Control) double-basing system, which protects them from accidental damage. Machining under water in turn eliminates the need for filtration systems, as well as undertaking further secondary processes, i.e. grinding. Furthermore, in order to prevent rust, the KVPG 150-300 VOLCUT plasma-oxygen cutting machine has a fully galvanised design. The VOLCUT 150-300 p ...

GILDEMEISTER MF twin 65 CNC lathe was built in 2000 in Germany by GILDEMEISTER Drehmaschinen GmbH. This extremely efficient machine is used for precision machining of workpieces with a maximum diameter of 200 mm. The machining process is performed inside a large work space, by means of two spindles and tools taken from two 12-position turrets. This solution maximises production efficiency by enabling simultaneous workpiece machining on both spindles. What’s more, any vibration or oscillation is eliminated by a rigid bed, guaranteeing high process stability even during the most intense challenges. The MF twin 65 CNC turning center, including the control cabinet, weighs approximately 6500 kg. Technical specifications of the GILDEMEISTER MF twin 65 CNC dual-spindle lathe General data - number of axes: 4 (X1,X2,Z1,Z2) - swing over bed: 240 mm - maximum turning diameter: 200 mm - ma ...

DUGARD EAGLE 1000 VMC CNC vertical machining center was built in 2000 in Taiwan by C Dugard Ltd. The machine is used for precision machining of workpieces with a maximum weight of 600 kg. The machining process is performed by means of reliable components that offer the highest quality of manufactured parts for many years of use. Inside the large workspace there is among others a large work table with a length of 1200 mm and a width of 450 mm, a powerful spindle and a 20-position tool magazine. The DUGARD EAGLE 1000 CNC machining center weighs 5800 kg. Technical specifications of the DUGARD EAGLE 1000 VMC CNC milling machine - CNC control: SIEMENS - feed in the X/Y/Z axis: 1020/510/510 mm - feed rate in the X,Y,Z axis: 1-7600 mm/min - rapid traverse in the X/Y/Z axis: 30/30/18 m/min - work table dimensions (L x W): 1200 x 450 mm - maximum workpiece weight: 600 kg - maximum spind ...

SERON 1330 STANDARD CNC router was built in 2020 in Poland by SERON Sp. z o.o. Sp.k. This modern and cost-effective solution for companies with diverse production profiles is suitable for machining a wide range of materials, i.e. aluminium, plastics and wood. The machining process is performed on a large vacuum table using an electro-spindle rotating at a maximum speed of 24000 revolutions per minute. All axes are driven by a powerful ORMON brand servo motor in order to achieve excellent dynamic movements combined with high working speeds. The heavily ribbed construction made of high-quality welded steel further ensures many years of stability and dimensional precision of the machine. The SERON STANDARD CNC milling machine is offered with extensive equipment, including an indexable 4th axis, CAD/CAM software and a vacuum pump. Technical specifications of the SERON 1330 STANDARD millin ...

KOVOSVIT MAS S80i CNC turning center was built by KOVOSVIT MAS a.s. in the Czech Republic. This extremely powerful machine is used for precision hole drilling, threading and turning of cylindrical, conical and spherical surfaces. The offer also includes a wide range of equipment in the form of components from renowned brands, which guarantee excellent repeatability of the manufactured parts over many years of intensive operation. These include, among others, a new tool measuring probe, a hydraulic tailstock and a HEIDENHAIN intelligent CNC control. All this makes the S80i CNC CNC lathe the perfect choice for both unit and small batch production. The total weight of the machine is 6700 kg. Technical specifications of the KOVOSVIT MAS S80i universal lathe - maximum turning diameter above the bed: 680 mm - maximum turning diameter over the slide: 430 mm - maximum bar diameter: 80 mm  ...

MAZAK QUICK TURN NEXUS 100MS CNC lathe was built in 2005 in Japan by YAMAZAKI MAZAK CORP. The machine, designed for precision machining of workpieces with a maximum diameter of 280 mm, is distinguished by the use of reliable components with excellent technical parameters, such as two spindles (main spindle and sub-spindle) and a 12-position turret. The machining process is performed inside a large, fully illuminated workspace by means of a powerful spindle with an integrated motor design that minimises vibrations at high speeds. This is all complemented by an intelligent CNC control that simplifies daily work by allowing even the most advanced machining programmes to be created in just a few steps. The MAZAK QTN-100MS CNC turning center weighs 4100 kg. Technical specifications of the MAZAK QUICK TURN NEXUS 100MS metal lathe - CNC control: MAZATROL 640T NEXUS - maximum turning diamet ...

RQ-ZH-120W automatic cartoning machine was built in 2022 in China by Rich Packing Machinery Co., Ltd. The machine is used for the automatic packaging of blister packs, sachets, tubes and bottles into cardboard boxes with a maximum basis weight of 350 g/m2. This task involves a number of sophisticated drives that are responsible, among others, for box forming, product insertion and box closing. The high degree of automation allows products to be packed into cartons very quickly, increasing work efficiency. The RQ-ZH 120W packaging line weighs 1400 kg. Technical specifications of the RQ-ZH-120W cartoner - HMI panel SIEMENS SMART LINE TOUCH with PLC controller - packing speed: 30-120 boxes/min - box basis weight: 250-350 g/m2 - maximum box dimensions (L x W x H): 180 x 85 x 50 mm - minimum box dimensions (L x W x H): 70 x 30 x 14 mm - maximum dimensions of the contents of the box ( ...

HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...

FEHLMANN PICOMAX 60-M CNC vertical machining center was built in 2006 in Switzerland by FEHLMANN AG. The machine is designed for even the most intensive machining of workpieces with a maximum weight of 300 kg. The machining process is performed inside a large workspace, equipped with, among others, a reliable high-speed spindle and a 24-position tool magazine. Daily work, on the other hand, is facilitated by the installed HEIDENHAIN CNC control, in which advanced machining programmes are created in just a few steps. The PICOMAX 60 M CNC machining center will satisfy even the most demanding customers thanks to its excellent performance and high machining precision. The total weight of the machine is 3350 kg. Technical specifications of the FEHLMANN PICOMAX 60-M CNC milling machine - CNC controller: HEIDENHAIN iTNC 530 - feed in the X/Y/Z axis: 505/355/610 mm - feed rate in the X,Y,Z ...

CITIZEN M32 V CNC sliding head lathe was built in 2006 in Japan by CITIZEN MACHINERY CO., LTD. The machine, designed for precision machining of workpieces with complex geometries, is distinguished by the use of a number of state-of-the-art solutions aimed at increasing overall production efficiency. These include among others two reliable spindles with C axis and capacious tool stations. What’s more, a specially designed bed with high thermal stability perfectly reduces the impact of heat, increasing the service life of all components and tools. All this is complemented by an intelligent MITSUBISHI CNC control with many useful functions. The CITIZEN M32V swiss-type lathe weighs 3200 kg. Technical specifications of CITIZEN M32 V CNC lathe General data - maximum turning diameter: 32 mm - turning length in one stroke: 320 mm - maximum turning length: 600 mm - maximum bar length: 3 ...

GILDEMEISTER TWIN 65 CNC automatic lathe was built in 2005 in Germany by GILDEMEISTER Drehmaschinen GmbH. The machine is used for precise, multi-axis machining of workpieces with complex geometries. To increase overall production efficiency, a combination of two spindles and two 12-position turrets with excellent technical specifications are used inside the large working area. Both spindles feature a C-axis with a high indexing accuracy of ± 0.002 mm, which facilitates complex machining operations that require precise positioning of the workpiece. All this is complemented by an intelligent SIEMENS CNC control with an intuitive interface. The GILDEMEISTER CNC turning center weighs 10000 kg. Technical specifications of the GILDEMEISTER TWIN 65 CNC lathe General data - number of axes: 8 (X1, X2, X3, Y1, B, Z1, Z2, Z3) - feed in the X1/X2/X3 axis: 300/180/175 mm - feed in the Y1/B ax ...

BIGLIA B56 S2M CNC lathe was built in 1998 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, distinguished by its high precision, reliability and repeatability, is an excellent choice for many industries, such as the automotive and aerospace industry. Workpieces with complex geometries are machined inside a large work space by means of two spindles and two turrets. This solution significantly speeds up production time and reduces machine downtime to a minimum. All this is complemented by the intelligent FANUC CNC control, which allows the creation of advanced machining programmes in just a few steps. The BIGLIA B.56/S2M CNC turning center weighs 6750 kg. Technical specifications of the BIGLIA B56 S2M lathe - CNC controller: GE FANUC Series 18i-T - maximum workpiece diameter: 560 mm - maximum workpiece length: 1000 mm - feed in the X/Z axis: 250/500 mm - number of spindles:  ...

BIGLIA SMART TURN B1200 CNC automatic lathe was built in 2008 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, dedicated to the precise, multi-axis machining of workpieces with a maximum diameter of 580 mm, was created as an effective answer to the daily challenges of modern business. For this purpose, it features modern components with excellent technical characteristics inside a large work space, such as two spindles (main spindle and sub-spindle) and a 40-position tool magazine. The high-speed operation of the tool magazine further significantly speeds up production time and reduces machine downtime to a minimum. The SMART TURN B1200 S CNC turning center is offered with a wide range of equipment, including a bar feeder, Y-axis and FANUC intelligent CNC control. The total weight of the machine is 7000 kg. Technical specifications of the BIGLIA SMART TURN B1200 CNC lathe Gene ...

GABELLA MACCHINE slitting line was built around 1990 in Italy by GABELLA MACCHINE S.p.A.. The machine enables precise cutting of steel and aluminium sheets into evenly sized strips. For this task, cutting rollers with special roller knives are used, which guarantee the highest cutting precision and optimum utilisation of the raw material. The finished strips of material are wound onto coils ready for further machining. The slitting line is offered with a set of new roller knives and reconditioned ejector rings. The total weight of the machine is about 7000 kg. Technical specifications of the GABELLA MACCHINE coil slitting line - material type: stainless steel, galvanised steel, aluminium, copper, etc. - sheet metal thickness (stainless steel): 0.2-1 mm - sheet metal thickness (aluminium): 0.2-3 mm - maximum cutting width: 530 mm - minimum cutting width: 10 mm - maximum coil weig ...

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

CINCINNATI ARROW 1250 CNC vertical machining center was built in 2001 in the United Kingdom by CINCINNATI MACHINE U.K. LIMITED. The machine, distinguished by its high reliability, productivity and precision, is used for the economic machining of workpieces. The machining process is performed inside a large work space, equipped with, among others, a 21-position tool magazine and a high-speed spindle. Its high-quality design eliminates any vibrations generated during milling, guaranteeing the highest possible stability during even the most intensive challenges. The offered CINCINNATI ARROW 2 1250 CNC machining center has undergone regular maintenance and servicing. The machine is after an spindle overhaul and the replacement of guides and screws in the X and Y axes. The total weight of the machine is 6000 kg. Technical specifications of the CINCINNATI ARROW 1250 CNC milling machine - C ...

LANSUN CNC XG32.05 tube plasma cutting machine was built in China by Wuhan Lan-sun Technology Co., Ltd. The machine, equipped with a reliable plasma source with the highest energy efficiency, is used for precision 3D cutting of tubes with a maximum diameter of 190 mm. The machining process is performed by a torch centrally positioned above the tube to be cut. The rotating head with holder, in turn, guarantees perpendicularity of the cut in relation to the tube axis. The offered LANSUN CNC plasma tube cutting machine is new, unused. Technical specifications of the LANSUN CNC XG32.05 tube cutting machine - maximum tube diameter: 190 mm - maximum tube thickness: 40 mm - inverter plasma cutter: HUAYUAN WELDER LGK-100IGBT quality cutting thickness (steel): 0.3-22 mm rated input power: 17.8 kVA rated input voltage: 3x 380 V; 50 Hz rated output current: 100 A rated output voltage: 12 ...

ADCOLE 1200 SH cylindrical coordinate measuring machine was built in 1990 in the United States by ADCOLE CORPORATION. The machine is used for measuring tight tolerances on camshafts, crankshafts and other cylindrical parts. The patented laser interferometer technology ensures the realisation of precise radial measurements with an accuracy of up to 0.5 μm. The ADCOLE Model 1200 coordinate measuring machine, including all components, weighs 5325 kg. Technical specifications of the ADCOLE 1200 SH crankshaft and camshaft measuring machine - machine dimensions (L x W x H): 1075 x 1195 x 2890 mm - peripheral table dimensions (L x W x H): 715 x 465 x 825 mm - control cabinet dimensions (L x W x H): 800 x 800 x 1800-2000 mm - machine weight: 3525 kg - total weight of the machine including all components: 5325 kg

ZHOUTAI AMD 600-H-LMSC plastic bag making machine was built in 2019 in China by SHANGHAI ZHOUTAI PACK MACHINE CO., LTD. The machine is used in the mass production of Stand-Up pouches, Zip Lock pouches and three side seal pouches. The entire production process, from feeding the material to stacking the finished products into small packets, is performed fully automatically. The material, with a maximum thickness of 160 μm, is unwound from two reels towards the workspace using PANASONIC inverter-controlled unwinders. Inside the working area, the film is accurately measured, properly cut and sealed, while holes are made in the finished bags. Once the process is complete, the bags are transferred to a receiving table, where they are stacked on top of each other to form small packets. The ZHOUTAI AMD600-H-LMSC.200P plastic bag making machine consists of components from renowned brands,  ...

COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...

ZD-500 plastic shredder was built in 2019 in China by Taizhou City Luqiao Qijin Wire Feeling Machine Manufacturing Factory. The machine is used in the processing of a wide range of raw materials, i.e. plastics, wood and aluminium. The machining process is performed inside a large working chamber, equipped with a rotor with 20 cutting knives. The number and positioning of the cutting knives prevents the machine from jamming on harder materials, resulting in smooth and problem-free shredding. The offered ZD-500 double-shaft shredder is a guarantee of stable and efficient operation for many years of intense challenges. The total weight of the machine is approximately 2000 kg. Technical specifications of the ZD-500 plastic shredder - processed materials: plastics, wood, aluminium, textiles, municipal waste, medical waste etc. - rotor diameter: 290 mm - number of cutting knives: 20 - c ...

METALLKRAFT MKS 350 H semi-automatic metal circular sawing machine was built in 2014. The machine, designed to cut workpieces at an angle of 45° and 90°, is equipped with top-of-the-range components that guarantee high operating reliability and cutting precision. These include a 350 mm diameter cutting disc, which ensures that the machined workpieces stand out for their smooth surface without any burrs or distortions. The machine also features, among others, a vice for longitudinal and slot cutting, a reduction gear with diaphragm pump and a mobile safety device for optimum safety during cutting. The METALLKRAFT MKS350H metal circular sawing machine weighs 280 kg. Technical specifications of the METALLKRAFT MKS 350 H circular sawing machine - cutting angle: 45° left/ +90° right - cutting capacity at 90° round cross-section (solid material): 60 mm round cross-section (pipe): 1 ...

DOOSAN DNM 4500 CNC machining center was built in 2022 (purchased as new in 2023) in South Korea by DN SOLUTIONS. The machine, designed for precision machining of workpieces with a maximum weight of 600 kg, is equipped with a number of reliable components that ensure uninterrupted operation for many years of intensive production. The machining processes, i.e. drilling, threading and milling, are performed inside a large work area by means of cutting tools and a powerful spindle with direct drive. All this is complemented by the intelligent SIEMENS CNC controller, in which advanced machining programmes are created in just a few steps. Throughout its entire service life, the machine has worked for just 83 hours. The DOOSAN milling center weighs 5000 kg. Technical specifications of the DOOSAN DNM 4500 CNC milling machine - CNC controller: SIEMENS SINUMERIK 828D - feed in the X/Y/Z axis ...

GARBOLI LPC 500 tube polishing machine was built in 2021 in Italy by BRUSA & GARBOLI. The machine is designed for the precision surface treatment of straight and bent tubes made of, among others, stainless steel and aluminium. The specially designed system of dry grinding, consisting of two opposing abrasive belts, ensures an even surface finish without any distortion, even on larger tubes. On the other hand, daily operation of the machine is facilitated by an intuitive control panel designed for precise setting of the working parameters. The BRUSA & GARBOLI tube grinding machine weighs 455 kg. Technical specifications of the GARBOLI LPC 500 orbital tube polishing machine - maximum tube diameter: 203 mm - minimum tube diameter: 10 mm - minimum tube radius: 225 mm - abrasive belt size (L x W): 1500 x 90 mm - control panel - main motor power: 9.7 kW - power supply: 400 V; 50 Hz  ...

OKUMA MA-600HII CNC machining center was built in 2012 by the Japanese brand OKUMA Corporation. This highly efficient machine is used for advanced workpiece machining in 4 axes. The machining process is performed fully automatically inside a large working area by means of precision cutting tools and a reliable high-speed spindle. The automatic pallet changing system allows workpieces to be loaded and unloaded simultaneously during machining, reducing machine downtime to a minimum. The extensive equipment also includes, among others, a capacious tool magazine and an intelligent CNC controller with an intuitive interface. The MA-600HII CNC horizontal machining center weighs 24500 kg. Technical specifications of the OKUMA MA-600HII CNC milling machine - CNC controller: OSP-P300MA - number of axes: 4 (X,Y,Z,B) - feed in the X/Y/Z axis: 1000/900/1000 mm - rapid traverse in the X,Y,Z ax ...

KITAMURA MYCENTER HX630G CNC machining center was built in 2017 by the Japanese brand Kitamura Machinery Co., Ltd. The machine, designed for precision machining of workpieces with a maximum weight of 1500 kg, was created as a response to the needs of modern business. In order to meet all production requirements, state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The machining process is performed fully automatically inside a large working area, which includes a capacious tool magazine and a reliable spindle with a special DCS (Dual Contact Spindle) system. This system ensures optimum spindle rigidity through simultaneous contact between the taper and the flange. Furthermore, the automatic pallet exchange system allows workpieces to be loaded and unloaded simultaneo ...

2000 X 2-6 MM cut-to-length line was built in 2018. The line was specially configured for machining stainless steel in a start-stop system with a stationary guillotine and sheet pick-up from the discharge conveyor. Maximum production efficiency is ensured by the use of a special system that packs the sheets into bundles after cutting. Other proven solutions, in turn, guarantee many years of trouble-free operation of the line. The offered cut-to-length line has undergone a general overhaul and is in perfect condition. All components meet the safety standards required by the applicable directives, as confirmed by the CE declaration. The 2000 X 2-6 MM cut-to-length line is fully complete and consists of the following components: – scissor lift table – sheet metal decoiler 7.5 t – infeed and guide system – sheet metal straightening unit – double-side foiling system – gui ...

WEMTECH Dynamic Torch 150/300 plasma cutting machine was built in 2022 in Poland by WEMTECH CNC. The machine, designed for precision machining of workpieces, is distinguished by the use of modern technical solutions that guarantee excellent production performance for many years of use. The machining process is performed on a table with a large cutting area which is filled with water or other coolant. The use of this solution eliminates the need to undertake any further secondary processes, such as grinding. The work table also has sectional exhaust extraction. The individual sections of the extraction table are controlled by pneumatic cylinders. The axes are driven by a stepper motor with a gear wheel mounted on a cushioned sled. This drive effectively eliminates backlash, as well as ensuring the achievement of high acceleration and working speed. The plasma torch, on the other hand,  ...

AVIA X-5 1250/630 CNC vertical machining center was built in 2015 in Poland by Fabryka Obrabiarek Precyzyjnych AVIA S.A. The machine is used for, among others, precision milling, drilling and threading of workpieces with complex geometries in 5 axes. All these machining operations are performed by a high-speed electro-spindle located on a tilting working head. The tilting head, in turn, offers the possibility to use shorter tools and select the optimum cutting angle. The AVIA X-5 5-axis CNC machining center is offered with an extensive range of equipment, including a rotary table, measuring probes and a intelligent HEIDENHAIN CNC controller. The total weight of the machine is 10000 kg. Technical specifications of the AVIA X-5 1250/630 CNC milling machine - number of axes: 5 (X,Y,Z,B,C) - feed in the X/Y/Z axis: 1250/700/725 mm - B axis rotation range: -110°/+45° - C axis rota ...

GEKA HYDRACROP 55/S hydraulic ironworker machine was built in 2018 in Spain by MAQUINARIA GEKA S.A. The machine, equipped with 5 work stations, is designed for precision machining of flat bars and angle bars. Each station is controlled by two hydraulic cylinders, which give the possibility to work independently or in parallel on two stations simultaneously. The GEKA HYD 55 S ironworker machine weighs 1390 kg. Technical specifications of the GEKA HYDRACROP 55/S ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - engine power: 5 kW - weight of the GEKA HYDRACROP 55/S machine: 1390 kg Flat bar shearing station - flat bar dimensions: 300 x 15 mm; 200 x 20 mm - blade length: 305 mm - working height: 880 mm Angle bar shearing station - shearing of angle bar at 90°: 12 ...

KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...

AMADA EM2510NT punching machine was built in 2005 in France by AMADA EUROPE S.A.. The machine, designed for machining of thin metal sheets with a maximum thickness of 3.2 mm, is distinguished by its high reliability and precision. All machining processes are performed with a high press force of 20 tonnes, by means of tools located in a 45-station turret. A brush table with integrated balls prevents scratches and nicks on the surface of the sheet metal, as well as facilitating its positioning. The AMADA EM 2510 NT punching machine weighs 18000 kg. Technical specifications of the AMADA EM2510NT punching machine - maximum press force: 20 t (200 kN) - number of axes: 5 (X,Y,T,C,A) - feed in the X/Y axis: 2500/1270 mm - feed rate in the X/Y axis: 100/80 m/min - maximum workpiece thickness (plain steel): 3.2 mm - maximum workpiece dimensions (L x W): 5000 x 1270 mm - maximum workpiec ...

AMADA HFBO 125-40 CNC hydraulic press brake was built in 1998 in France by AMADA EUROPE S.A. The machine, distinguished by its high productivity and excellent precision, is used for machining sheet metal with a maximum length of 4200 mm. The rigid design combined with a press force of up to 125 tonnes ensures the achievement of the best bending results, regardless of the material type. Daily work, on the other hand, is facilitated by the simple operation of the machine in the form of a convenient foot switch and intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HFB 125/4 CNC press brake weighs 10000 kg. Technical specifications of the AMADA HFBO 125-40 press brake - CNC controller: AMADA OPERATEUR - number of axes: 8 - maximum press force: 125 t (1250 kN) - maximum sheet metal width: 4200 mm - slider stroke: 180 mm - stopping ti ...

AMADA LCG3015 laser cutting machine was built in 2013 in Japan by AMADA CO., LTD. The machine, designed for precision sheet metal cutting, is equipped with a reliable laser source of the highest energy efficiency. It generates a stable laser beam with a power of 3.5 kW and a thickness of only a few μm, which ensures very smooth and even edges along the entire length of the workpiece. All this is completed by an intuitive CNC control in which even the most advanced machining programmes are created in just a few steps. The AMADA LCG-3015 laser cutting machine weighs 8200 kg. Technical specifications of the AMADA LCG3015 laser - laser power: 3.5 kW - feed in the X/Y/Z axis: 3070/1550/100 mm - rapid traverse in the X/Y/Z axis: 120/120/80 m/min - cutting speed in the X and Y axis: 0-120 m/min - maximum workpiece weight: 920 kg - work table dimensions (L x W): 3000 x 1500 mm - work  ...

KEMPPI FastMig M 420 MIG/MMA welder was built in 2016 in Finland by Kemppi Oy. The machine, which is a configuration of high-quality components, is designed for both complex manual and mechanised MIG/MMA welding. With unlimited flexibility for specialised tasks and materials, the FastMig M420 welder is the best choice for businesses looking to increase productivity and welding quality. The KEMPPI semi-automatic welding machine consists of the following parts: – power source: KEMPPI FASTMIG M 420 – wire feeder: KEMPPI MXF 65 – feeding roller: DT400 – cooler: KEMPPI FAST COOL 10 – 4-wheel trolley: KEMPPI PM500 – connecting cable 10 m There are 2 units of these machines for sale. Price included in the advertisement is for 1 unit. Technical specifications of the KEMPPI FastMig M 420 welding machine - supply voltage: 400 V (-15% to +20%) - rated power (60%/100%):  ...

UF 150070301 MD PVD sputtering machine was built in 2015 in China by LONGKOU BITE VACCUM TECHNOLOGY CO., LTD. This extremely high-tech machine is used in the vacuum coating process. The technological vacuum combined with the high voltage inside a chamber causes the expulsion of metal atoms from the target (evaporation material), which are then deposited on the surface of the workpieces. Workpieces treated in this way are characterised by a ″metallic effect″ with high resistance to abrasion and chemical agents. The offered LKBT magnetron sputtering machine has the necessary equipment, i.e. a high-vacuum diffusion pump, compressor and RITTAL chiller. It is also possible to purchase new titanium targets (20 pcs.), chrome targets (4-5 pcs.) and TiAl alloy targets (3-6 pcs.) for an additional charge. The price for a single piece is 1200 PLN. Technical specifications of the UF 150070 ...

NARGESA C3006 hydraulic guillotine shears were built in 2015 in Spain by PRADA NARGESA, S.L. The machine, which is designed for precision cutting of sheet metal with a maximum thickness of 6 mm, has quality knives with four cutting edges with increased service life. The beam is driven by a powerful hydraulic unit, which, like the electronic system, is made up of components from renowned brands. Easy operation of the machine, on the other hand, is ensured by a digital LCD display with an installed NC controller. The NARGESA guillotine shears weigh 8000 kg. Technical specifications of the NARGESA C3006 guillotine shears - maximum workpiece thickness (black steel 450 N/mm2): 6 mm - maximum workpiece thickness (stainless steel 700 N/mm2): 4 mm - maximum cutting length: 3030 mm - number of strokes: 12/min - cutting angle: 1,75° - maximum back stop distance: 700 mm - back stop posit ...

NARGESA MC 400 3-roll bending machine was built in 2015 in Spain by PRADA NARGESA, S.L. The machine, designed for precision machining of steel components, is an excellent choice for the production of, among others, gates, fences, railings and balustrades. The extremely rigid body is distinguished by the use of guide shafts and 3-axis rollers made of hardened steel, whose drive eliminates slippage during the rolling process. This solution, combined with independent, manual adjustment of the lower axes, increases overall ergonomics and productivity. The NARGESA tube and profile bending machine weighs 365 kg. Technical specifications of the NARGESA MC 400 tube and profile bending machine - number of rollers: 3 - roller diameter: 130 mm - roller rotation speed: 8 rpm - number of shafts: 2 - shaft diameter: 40 mm - shaft usable length: 80 mm - power: 1.5 kW - power supply: 3x 400 V ...

BRIDGEPORT VMC 600/22 Digital CNC machining center was built in 2000 by the English brand Bridgeport Machines Inc. The machine, equipped with among others 4th axis and a 22-position magazine, is used for precision machining of workpieces with a maximum weight of 500 kg. The machining process is performed by a reliable spindle with an optimised speed range, which is driven by a powerful motor. This power allows full utilisation of the cutting tools in any, even the most intensive, production process. All this is complemented by the HEIDENHAIN CNC control, which allows advanced programmes to be created in just a few steps. The BRIDGEPORT CNC vertical machining center weighs 2500 kg. Technical data of the BRIDGEPORT VMC 600/22 Digital CNC milling machine - CNC controller: HEIDENHAIN TNC 426PB - feed in the X/Y/Z axis: 600/410/520 mm - rapid traverse in the X/Y/Z axis: 40/40/20 m/min  ...

ATMA ATMACE 710/G screen printing machine was manufactured in 2012 in Taiwan by ATMA CHAMP ENT. CORP. The machine is used for precision printing of medium-sized items, i.e. posters, car stickers and advertisements, on both rigid and flexible flat substrates. The sliding vacuum table made of aluminium alloy with high resistance offers a large working area. Quick replacement and positioning of the screen frame, on the other hand, is ensured by a special gripper, equipped with a micro screen adjustment and pneumatic lock. The ATMACE 710/G screen printing machine can also be integrated into production lines to increase productivity. The total weight of the machine is 1290 kg. The offer also includes the AERORTERM ULTRATERM UV 1100/3000 drying tunnel, manufactured in 2009 by the Czech company AEROTERM a.s.. The machine, designed for curing UV inks and varnishes, is equipped with one row of ...

MAZAK SUPER TURBO X510 MK III laser cutting machine was built in 2012 by the Japanese corporation YAMAZAKI MAZAK CORP. The machine, designed for machining workpieces made of among others steel and aluminium, guarantees excellent cutting results both in unit production and intensive series production. The machining process is performed by a cutting head with autofocus and a 7.5″ lens. The laser resonator integrated into the machine design with the highest energy output generates a stable 4 kW laser beam, which ensures that the sheet metal edges are distinguished by unprecedented precision, smoothness and absence of unevenness. The extensive equipment includes among others a MAZATROL CNC control, a chiller and a multi-chamber extraction system. The SUPER TURBO X510 MK III laser has so far operated in one shift for a maximum of eight hours a day. All repairs, maintenance and oil change ...

CITIZEN CINCOM M32 CNC lathe was built in 2003 in Japan by CITIZEN WATCH CO., LTD. The machine, which is a combination of high performance and precision, enables to perform even the most complex machining of workpieces in 8 axes. All machining processes, i.e. precise drilling, threading and turning are performed inside a fully illuminated work area by means of cutting tools taken from 3 tool stations. The high thermal stability bed inside effectively reduces the influence of heat, increasing the service life of all components and tools. The CITIZEN CINCOM M-32 CNC lathe is offered with an extensive range of equipment, which includes, among others, two spindles (main spindle and sub-spindle) and an FMB bar feeder. All this is complemented by an intelligent CNC control, which allows, for example, self-diagnosis of the machine or program backup. The CITIZEN M32 swiss-type lathe weighs 32 ...

WAFO TMK 25 CNC lathe was built in 2011 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine is designed for threading and precision turning of external, internal and spherical surfaces. Workpieces with a maximum diameter of 300 mm are machined inside a fully illuminated workspace, equipped with, among others, a reliable spindle and a 4-position tool vice. Operation of the machine is significantly facilitated by the installed FANUC CNC control with the innovative MANUAL GUIDE workshop programming tool, which reduces the time between drawing up the technical drawing and the actual production of the workpiece. The WAFO metal lathe weighs 1000 kg. Technical specifications of the WAFO TMK 25 lathe - FANUC Series 0i Mate-TD CNC controller with MANUAL GUIDE - turning diameter above the bed: 300 mm - turning diameter over slide: 135 mm - maximum spindle speed: 500 rpm  ...

STAR ECAS 32T CNC lathe was built in 2007 in Japan by STAR MICRONICS CO.,LTD. The machine, which combines high performance and precision, has been designed to improve the machining of even the most complex workpieces. Its extensive machining capabilities facilitate complex machining processes such as turning, drilling and threading, both on the front and back of the workpiece. This makes the STAR MICRONICS ECAS 32T CNC lathe indispensable in many industries, such as the automotive and aerospace. The STAR ECAS-32T swiss-type lathe is equipped with, among others, 11 axes, two spindles (main spindle and sub-spindle) and capacious turrets that can accommodate many tools for any type of machining. The maximally rigid design additionally ensures incredible process stability, which is essential to achieve excellent precision and quality of the produced parts. The total weight of the machine  ...

CK6146ZX CNC lathe was built in 2013. The machine, designed for machining rotating solids, i.e. cones, shafts and spheres with a maximum diameter of 460 mm, offers excellent precision and repeatability of the manufactured parts. The machining process is performed inside a large workspace, by means of quality cutting tools and a spindle with an optimally adapted speed range. The design, in turn, ensures high stability of machining by effectively eliminating any vibration and oscillation generated during the turning process. All this is complemented by the intuitive FANUC CNC control, which enables the creation of advanced machining programmes in just a few steps. The CK 6146ZX metal lathe weighs 2800 kg. Technical specifications of the CK6146ZX flat bed CNC lathe - CNC controller: FANUC Series 0i Mate-TD - turning diameter above the bed: 460 mm - turning diameter over slide: 240 mm  ...

BIGLIA B658/B CNC turning center was built in 2009 in Italy by OFFICINE E. BIGLIA & C. S.p.A. The machine, designed for machining workpieces with a maximum diameter of 380 mm, offers excellent precision and repeatability of the produced parts. The machining process is performed inside a large workspace which includes, among others, a powerful spindle, a 12-position turret and an automatic tailstock. All parameters are, in turn, entered in an intuitive FANUC CNC control with many useful functions. The BIGLIA B 658/B CNC lathe weighs 5700 kg. Technical specifications of the BIGLIA B658/B lathe - CNC controller: FANUC Series 21i-TB - maximum turning diameter: 380 mm - maximum bar diameter: 80 mm - maximum passage: 620 mm - maximum turning length: 650 mm - feed in the X/Z/B axis: 220/650/660 mm - rapid traverse in the X/Z/B axis: 20/24/12 m/min - spindle rotational speed: 30-3000  ...

STAR ECAS 32T CNC lathe was built in 2005 in Japan by STAR MICRONICS CO., LTD. The machine, designed for the precise machining of complex workpieces, is used in many industries, such as automotive and aerospace. Its extensive machining capabilities facilitate complex machining processes, such as turning, drilling and threading, both on the front and back of the workpiece. Compared to other lathes available on the market, the offered STAR ECAS-32T swiss-type lathe stands out with the use of 11 axes, two 10-position turrets and two spindles (main spindle and sub-spindle). The extremely rigid design, in turn, provides the incredible process stability which is necessary to achieve excellent precision and quality of the produced parts. All this is complemented by intelligent CNC control, in which even the most advanced work programs are created in just a few steps. The STAR MICRONICS ECAS  ...