used 24 for sale

The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy  ...

Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit

Polar 115 N, Year 2024 TFT Touchscreen Program Airtable Airtable left Airtable right Etc. Available: immediately

FG wilson diesel generator Model P550E1 perkins engine 440KW 550KVA 415/240volt 765Ampere serial number: FGWRPES1PLPS02792 infogeneralpowerholland.nl +31681163153 generalpowerholland.nl

MWM TCG 2020 V12 1200kw 1875KVA Marelli generator Type MJB500 SD4 B24 year 2008 50hz 1500 rpm natural gas / aardgas TEM evolution control panel Scope: Genset, Pomp, gasline, control panel generalpowerholland.nl +31681163153

Complete power plant of Jenbacher 624 natural gas engine. The engine is ready to start working and all accessories are available. The engine has 46000 working hours with all the maintenances done by the official technical service. Power:4491kW Fuel oil: Natural Gas Working Hours: 46000 Yom:2012 Voltage:6300V

Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of manufacture: 1999 Shot weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 ccm Shot weight: 17 g Screw L/D ratio: 24.5 Clamping System 250 Clamping force: 25 t Mold platen dimensions: 400 x 400 mm Clearance between tie bars: 270 x 270 mm Mold height: 200 mm Opening stroke: 275 mm Maximum platen distance: 475 mm Electrical connection (fuse protection): 120 l Weight: 1900 kg Control system: Selogica Equipment: -Sorting flap -Euromap 12 interface -Picker

Used Kosme PET Bottling Line, built in 2018, is a highly efficient machine with a production capacity of 5,300 bph for 500 ml PET containers. The line includes several essential components: a Kosme preform unscrambler, a Kosme preform elevator, and a Kosme preform sorter, all manufactured in 2018. The Kosme blow molder of the same year allows for the processing of preforms into finished containers. Additionally, the system is equipped with an ATS Chiller for temperature control, air conveyors for transportation, and a mixer made in 2016. The Kosme filler was built in 2017, while the AVE capper dates back to 1999. The Kosme labeler, from 2018, ensures precise and fast labeling. The line is also equipped with conveyors, an SMI shrink wrapper from 2001, and an SMI shrink tunnel for package handling. It is suitable for packaging 6, 12, and 24 units. Finally, a Videojet Date Coder and  ...

Machine Type: CNC Turning/Milling Center Manufacturer: Deawoo Type: Puma TT2000SY Year of Make: 2005 Operating hours 6235 h Condition: used / ready to use Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-DEA-0625 DESCRIPTION We offer you a used CNC turning/milling center from the manufacturer Doosan Deawoo. Machine Type:: CNC Lathe / Turning-Milling Center Manufacturer: Doosan Daewoo Model: Puma TT2000SY Technical details Main spindle(left) / sub-spindle(right) Turning diameter over bed:800mm Turning diameter over bed slide:620mm Max. workpiece length:740mm Max. turning diameter: approx. 390mm / approx. 315mm max. weight on the spindle (incl. chuck)120kg Max. rod diameter:65mm X-travel: approx. 255mm / approx. 190mm Y-travel: 120mm (-/+60) / none Z-travel: approx. 800mm / approx. 900mm  ...

Process air cooler/chiller/chiller, air-cooled, Type: TAEevo Tech 1002 P3 MTA S.p.A. TAEevo Tech 1002 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Victaulic DN 100 Connector Serial No.: 2200404931 ...

Process air cooler/chiller/chiller, air-cooled, Type: TAEevo Tech 1002 P3 MTA S.p.A. TAEevo Tech 1002 P3 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr., built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 200 [682428 Btu (IT)/h] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 34.2 Available pump pressure (bar) 3.09 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 99 Max. Current (A) 167 Starting Current Circuit (A) 371 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2155 Weight (kg) 2998 Victaulic DN 100 Connector Serial No.: 2200404931 ...

Filter area: 20 m² (20 filters, approx. 460 mm x 1100 mm) Volume flow: 1500 m³/h Compressed air pressure: 6 bar Filter resistance: 8 mbar Total length: approx. 4300 mm Total width: approx. 2400 mm Diameter: approx. 1800 mm Tube diameter: approx. 125 mm each

169 MW Power Plant in very good condition / Direct from the owner / Great Investment Opportunity Commercial Operation Start: January 2010 Contract Status: Operated under standby mode until December 2024 20 x Wartsila 20V32 8.45MW each, 60Hz HFO, But convertible to Diesel or Biodiesel. Green. ✅ Highlights • 20 Generating Sets (Gensets) mounted on steel spring foundations • Synchronous three-phase generators with turbocharged diesel engines • Comprehensive auxiliary systems: • Fuel treatment and booster systems • Black start generator • Charge air, cooling water, and exhaust systems • Steam generation and compressed air systems • PLC-based control & monitoring with central and local panels • MV power distribution with generator cubicles, switchgear, and transformers ⚙️ Current Condition • Running Hours: Most gensets remain withi ...

Manufacturer: Green Transfo Type: Minera MP Year of manufacture: 2024, unused Number of units available: 9 pieces Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV

Compette linear unit, dismantled, max. stroke 900/1220mm, , used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company as part of a machine disassembly and is in very good condition. The photos show the linear unit mounted on a swivelling blasting table. One unit has the motor on the left, the 2nd unit has the motor on the right. The parts have already been dismantled! Complete linear unit with the following scope of delivery: - Electric motor Siemens, 1LA7096-4AA11, 1.5 KW, 1420/min, - Zimm lifting gear I=6:1, 24mm stroke/sec. - Max. stroke without carriage only with threaded nut 1220mm, - Max. stroke with slide approx. 900mm - Trapezoidal threaded spindle 1270mm, with bellows, D35mm, 6mm pitch, - Bearing block for spindle with mounting bracket - Bronze threaded nut with lu ...

Machine Type: CNC Machining Center Manufacturer: Starrag / HECKERT Type: CWK 400 Year of Make: 2005 Operating hours 32099 h Condition: used / ready to use Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference MV-HEC-0625 DESCRIPTION We offer you a used CNC machining center from the manufacturer Starrag. Technical details x-travel:625mm Y travel:650mm z-travel:650mm B/A axis: B-axis (360 x 0.001°) 100rpm Spindle speed: of 50... 10000 rpm (stepless) Control: Siemens Sinumerik 840D Table/pallet size (LxW in mm): 2 pallets 500x400mm Table/pallet alignment type:T-slots according to DIN 55201 Pallet changer / set-up station / yes / yes / Pallet change / tool change time: 8sec / 5sec Table / pallet load (in kg): 400kg Working feed range x/y/z: 1-40000mm/min Rapid traverse X/Y/Z: 40m/min Torque 100 % ...

Hydraulic Tapping Machine with Capacity M3 to M20 (M24) -Without table -Projection approx. : 1800mm -With digital depth control

- Manufacturer: GSA / Euro - Diesel GmbH - Generation capacity: 850 kVA - Nominal power: 680 kW - Diesel tank 750 l - Year of construction: 2005 - With control cabinet - Battery system 24 V - Completely assembled in a 40 ft container - Only 75 elapsed operating hours according to the meter - without exhaust system - Very good condition Diesel Engine: - Manufacturer: MTU - Type: 16 V 2000 - Power: 720 kW - Year of construction: 2000 Generator: - Manufacturer: AvK - Type: DSG62L 1-4 - 1299 A - 900 kVA - 1500 rpm - 400V

Equipment: - Spindle SK40 - Control Heidenhain MillPlus - Max. speed 18,000 min-1 - Places in tool changer 24 / bread drawer - Swivel head and rotary table

Lead and Pull Spindle Lathe WEILER Condor - Original paint - Turning diameter over bed 330 mm - Turning diameter over support 170 mm - Turning length 800 mm - Tip height 160 mm - Spindle bore 38 mm - Spindle speeds 24-2800 rpm - Automatic longitudinal/face feeds - Tailstock MK3 - Emergency/Off - Total power requirement 3 KW - Three-cheek butter -Documentation - Multifix with insert - Electric lining protection - Work light - Swarf back wall Dimensions: LxWxH 1.9x0.9x1.5 meters / Weight 850Kg

Offset printing machine Ryobi 524 HXX, year 2001, 4-color, color control console in good condition, immediately available Bsbr Sowcw H Teb Nwkolh If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to install the machine in

High-lift order pickers Manufacturer: OM Type: XOP2I Year of Make: 2009 Drive Control: MOSFET55re Operating hours approx.: 1,300 Drive: Electric Operation: Stand Load capacity: 1,100 kg Load centre : © 400/600 mm Load distance (x): 303 mm Wheelbase (y): 1,447 mm Net weight (incl. battery): 2,850 kg Axle load with drive/load side: 900/3,050 kg Axle load without load on drive/load side: 1,550/1,300 kg Height of mast retracted: 2,270 mm Stroke: 3,180 mm Height of mast extended: 5,520 mm Height above canopy (cab): 2,340 mm Stand height: 240 mm Additional stroke: 740 mm Stand height raised: 3,420 mm Height lowered: 65 mm Overall length: 3,187 mm Length, including fork back: 1,987 mm Overall width chassis: 880/900 mm Fork Zinc Dimensions: 60/120/1,200 Fork carriage DIN 15173, form A,B: welded Fork width: 660 mm Fork Outside Spacing. 560 MM Width above ...

HOBART Front Door Machine Year of manufacture 2018 with electronic program control Double-walled housing Capacity up to 30 baskets/h SMARTRONIC with 5 automatic programs 120 sec./240 sec./360 sec./>360 sec./hygiene program Automatic tank filling Sieve Contamination Sensor, Vacancy Indicator (Cleaner/Rinse Aid) Self-cleaning program! Water heater 15.3 Total connected load 21.6 Interior: W x D x H = 1,258 x 773 x 860 mm (with basket 825 mm) Water consumption 7.5 L / 9 L / 9 L Fuel tank capacity 130 L Heater performance: with cold water connection 400 V / 15.3 kW with hot water connection 400 V / 9.1 kW Total connected load: with cold water connection 21.6 kW / 3 x 35 A with hot water connection 15.6 kW / 3 x 35 A Pump capacity 2 x 2.9 kW / 2 x 1,150 l /min Basket dimensions 1,240 x 700 mm Insertion height 860 mm External dimensions: BTH 1375 x 945 x 1984/2 ...

Arburg Allrounder 270S 250-60 Clamping force: 25 t Year of Make: 1999 Injection weight: 17 g Injection Unit 60 Screw diameter: 18 mm Specific injection pressure: 2500 bar Injection volume: 20 cc Injection weight: 17 g L/D ratio of screw: 24.5 Clamping unit 250 Clamping force: 25 t Panel size: 400 x 400 mm Lights spar spacing: 270 x 270 mm Tool height: 200 mm Opening travel: 275 mm Maximum panel spacing: 475 mm Electrical connection (fuse): 120 l Weight: 1900 kg Control: Selogica equipment: -Sorting flap -Euromap 12 interface -Picker

Machine name: Forklift Manufacturer: Toyota No. 7FBEST13 / 10932 Year of Make: 2010 Condition: used Hours: 5017 h No charger Load capacity: 1250kg Weight without battery: 2279kg Battery voltage 24 V Lifting height: 3010mm UVV without defects 01/25 Monthly maintenance carried out

The laser system for automatic sheet metal processing consists of two - Laser cutting machines Bystronic BySprint Fiber 3015 - Laser sources Bystronic Fiber 4000 - Laser loading/unloading systems Bystronic Bytrans 3015 - Bystronic storage systems - Suction Donaldson Max. sheet length: 3000 mm Max. sheet width: 1500 mm Cutting range: 3048 mm (x), 1524 mm (y), 70 mm (z) Max. positioning speed: 100 m/min Max. workpiece weight: 890 kg Laser power: 4000 watts Max. structural steel: 20 mm Max. stainless steel: 15 mm Max. aluminum: 15 mm Location: Zweibrücken Professional assembly and loading are included in the offer.

Paper drill Hang 106DTK4, machine number 62407, in good condition, immediately available

Centricator CO-S Haff Schneider OVP New Centering Device Circle Zero Point Meter Total weight 770 grams More dimensions can be found in the pictures New and unused in original packaging. These are only open for viewing. Packaging with slight traces of storage You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice. 24 65 86 F1204 (internal article number)

Precise 0,6kw ESC 3043 +Control Unit 50k 1min. pneum. Tool change D.4mm Total weight 15kg. Only the spindle without cable weighs approx. 3.5kg Pneumatic collet/tool change. Diameter 4.00mm Max. speed 50,000, minimum 10,000 is specified. According to the controls, however, it somehow goes up to 6000 down. Water cooling is necessary during operation, this is all described in the original operating instructions. Water cooling is not included. The requirements are described. There is at least talk of liquid cooling on the technical drawing. Very good used condition, full function. You will receive an invoice in paper form. Differential taxation according to sec. 25a of the German VAT Act. Therefore, no VAT is shown on the invoice. 24 63 87 F1448 (internal article number)

This is a 305GTP dry steam quick cooker from the premium manufacturer Hobart from 2018. The medium-sized 305 GTP dry steam rapid oven is often used in the field of mass catering. With its 3 x 1/1 GN inserts, it cooks up to 650 portions per hour fresh and accurate to the minute. The evaporation of the water and the associated increase in volume creates an atmosphere of saturated steam in the cooking chamber of the GTP, which ensures excellent heat transfer to the food. Saturated water vapor has great advantages in terms of transferable heat flux density compared to hot air or combination steam. Shorter cooking time means less nutrient loss and healthy food. The device has been tested in our in-house specialist workshop and is fully functional. The price quoted is net plus 19% VAT. The RRP for this device is €28,202 net. Our used equipment service for you - 6 months warranty ...

CNC lathe with driven tool stations Manufacturer : Biglia Model : B 658 MB CNC Control: FANUC Series 18i-TB Year of manufacture : 2004 Condition : good , fully functional Location : Hultsfred -Sweden Availability : in stock Specifications Maximum turning diameter: 380 mm Maximum rod diameter: 80 mm Maximum passage: 620 mm Maximum turning length: 650 mm Feed in the X/Z/B axis: 220/650/660 mm Rapid traverse in the X/Z/B axis: 20/24/12 m/min Spindle speed: 30-3000 rpm Spindle bore diameter: 90 mm Spindle tip height: 1055 mm Inner diameter of the front bearing: 130 mm Spindle End: ASA 8 Spindle drive power: 26/22 kW Diameter of the lathe chuck: 315 mm 12-position bidirectional turret Outer lathe chisel shank: 25×25 mm Shaft of the internal turning tool: ⌀ 40 mm Indexing of the turret (by 1 position): 0.1 s Driven tool stations 12 positions Max. speed driven  ...

100 Euro-Pool Lattice Box grey 120 x 80 cm Used goods, good condition, see photos External dimensions 1,240 x 835 x 970 mm Payload: 1000 kg Net weight: approx. 78 kg Stacking load: 5000 kg Color: Gray The front side is foldable. One half is to be opened from above, the other half is to be opened from below. Negotiation price: € 95,- net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

500 pcs transport racks – stanchion racks – tray racks used Used goods, good condition, see photos Outer dimensions: 135x116x24cm Inner dimensions: 125x104cm Height incl. tubes: 200 cm galvanized Diameter of tubes: 50 mm Stackable on top of each other Negotiation price: € 149,- net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Hurco VMX 24 with 4/5 axle Kitagawa, built in 2004 Ultimax 4 control, software 2.33, software options see pictures. Machine and 4/5 axis runs well and is ready for immediate use. So far only plastic processing. Switch-on hours main switch 51600h Travel : x 610mm y 508mm z 610mm Chip screw in the working area, coolant system with IKZ 20bar. Bearing sets in all axes (x-y-z) renewed. Milling spindle was replaced about 2 years ago. Machine can be viewed under power with us in 83558 Maitenbeth by arrangement. Price VB 15500,- € Sale without warranty, freely loaded onto trucks.

Hurco VSX 24 with SSM control. Equipment like vmx series from bj. 2000, only with single screen. Year of manufacture 2001 Machine runs well and is immediately available. Travel x-y-z 610mm-508mm-610mm Speed 10000 rpm Chip auger in the working area Sale freely loaded onto trucks, Price is net plus VAT. Machine is energized and can be visited by appointment.

Geared motor Article number: FDU1702 2358249 005 2KJ3102-1DE22-2AP1-Z Z29-LE80MH4E-L16\10N IP55 50HZ - 60HZ 3.11\1.79A 1.72A 0.75KW S1 1440r\min 50HZ n2:99.0r\min 60HZ n2:120r\min 18Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2401485 2KJ3102-1EM23-2HA1-Z ZZ29-LE90ZLR4P IP55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:416r\min 60HZ n2:499r\min 20Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1711-2401486 001 2KJ3501-6EM23-2HB1-Z BAZ29-LE90ZLR4P IP 55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:343r\min 60HZ n2:411r\min 22Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Article number: FDU1703/2358232 003 2KJ3502-7EK23-2HG1-Z BAZ39-LE90SM4P 50HZ - 60HZ 1.1 KW S1 1440r\min 50HZ n2:181r\min 60HZ n2:219r\min 24Kg NEW and fully functional, from stock, see pictures for more details.

Geared motor Manufacturer: SEW Type: KAF57 DRS100M4 3 kW r/min 1400/124 The device is NEW and fully functional, see pictures for more details.

This injection molding machine from Dr. Boy is in good condition. The machine is from 2024 and has few working hours. Brand: Dr.Boy GmbH & Co.KG Model: BOY XS E Year of construction: 2024 Closing force: 10 T Screw diameter: 18 mm Shot volume: 15.3 cm³ Working hours: < 25

Commissioning 2024 Switch-on hours 2900 h Spindle hours 665 h FANUC iHMI control with 15 touch Main spindle with passage Ø 94 mm max. speed 3,000 1/min Three-jaw chuck max. rotary Ø 552 mm max. turning length 1,192 mm Tailstock towed with hydr. Barrel Turret with 16 stations (all driven) Y-axis +80/-60 mm C-axis Conveyor High-pressure coolant pump 40 bar SBS Tool Breakage and Wear Monitoring Measuring probe, automatically swivelling Interface bar feeder SHW Autoblock Bezel List price 276.000,-

Technical data for the pallet racking system: Shelving system: Polypal Type: Stockpal Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,010 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 60 pcs. Total number of pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Type: SKMO 5220 P Profile dimensions: 85 x 63 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 4,000 mm high 1,100 mm deep 20x Pallet rack cross ...

Emerito 1.8 Capper Serial: 624-p165 2016, Twist -off capping machine, lids from TO27 - TO82 diameter, height of lid up to 18mm DTO, Containers from diameter 30mm to 106mm, height from 40mm to 260mm, up to 70 bottles per min, variable speed, previously used on 50mm caps, 3Ph

Logopak 920 IIP labeller Serial: 2040294 2004, Print and apply labelling system, high speed pallet labelling, with label and ribbon rolls of up to 1200m, up to 240 pallets per hour, touch screen controls, with manual, 3Ph

A new SEX engine will be sold. The engine is new and unused. Original price 5.859,29€ from August 2024

Sliding table saw and table milling machine Felder KF 700 S YOC 2024 Format carriage length 2500 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Scoring Ø 120 mm X-Roll Sliding Carriage Cutting width 850 mm with digital display Electromotive height adjustment Saw blade swivel 45° manual adjustment Saw blade Ø 315 mm Motor/Voltage 5.5 kW / 7.5 HP / 400 V Cutting height max.110 mm Table milling machine motor 5.5 kW Spindle tiltable 0-45° Left/right rotation selectable Speed 3500 / 6500 / 8000 / 10 000 rpm Max tool diameter 230 mm Spindle diameter 30 mm Total weight approx. 700 kg