used WEINIG for sale

working width 460 mm working height 260 mm 4 heads three feed speeds 6 / 12 / 24 m/min ATS - Simatic spindle diameter 50mm additional chamfering unit Engine power: 1 - 22 kW 2/3 - 22 kW 4 - 22 kW spindle rotation 6000 rpm spindles with double bearings bed lubrication - pump with adjustable oil spray frequency feed motors - 7.5 kW in total year of production 1994 complete technical documentation with electrical diagram total energy demand 74 kW the machine currently has a set of 450/250 mm heads installed

Panel length: 3,500 mm Panel width: 1,300 mm Workpiece thickness min: 11 mm Workpiece thickness max: 60 mm Crkikw9B Input length min: 300 mm Cycle time: 200 s Capacity m2/ 8h: 720 High Frequency Press: Yes Power HF generator: 30 kW Gluing unit: Yes Joint gluing press: Yes

Pre-planer with groove bed, Working width: 170 mm Working height: 120 mm Number of Spindles: 4 Spindle arrangement: bottom-top-bottom-top Spindle diameter: 50 mm Spindle speed: 6000 rpm Motor powers: 30-22-11-11 kW Feed speed: 12-120 m/min Driven rollers in the table: 6 Table lubrication: automatic Table height constant: 840 mm Diameter of the suction nozzles: 4x160 mm Weight: 4500 kg Space requirement: 4000x1700x1400 mm Voltage/Frequency: 400V

Head sharpener Weinig Rondamat 950 Wheel diameter min/max: 150/225mm Wheel width min/max: 5/10mm Grinding wheel bore 60mm Tool diameter min/max: 100/230mm Maximum tool length 240mm Grinding spindle speed adjustable 1700/2000/2400/3000 r.p.m Coolant tank about 50l Possibility of sharpening heads with profile knives DTR documentation

Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 6 Spindle system: Bottom 5.5kw Rights Left 11kw Top 11kw Top 11kw Bottom 11kw Spindle speed 6000r.p.m Pneumatic clamps divided into 3 sections Powercom Control Feed speed adjustable by inverter up to 30m/min Technical documentation CE Declaration Extraction spigots fi140

Weinig PROFIMAT 22N four-sided planer – after technical inspection - very good condition – DTR TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm lower head 4 kW right head left head 11 kW upper head 5.5 kW lower head 4 kW feed motor 2.2 kW feed speed 6-22 m/min four top steel pulling rollers one rubber upper pulling roller feed on cardan shafts pneumatic pressure electric height adjustment length of the initial top 2485 mm machine dimensions (length/width/height) 400 / 180 / 170 cm weight ~ 1800 kg

I sell the four-sided planer Weinig POWERMAT 2400, built in 2013 Feed speed 8-80 m/min. - 15KW (20HP) Working width 370mm Working height 130mm 5 Spindle + Special Radius Unit Configuration: Bottom - 11kW (15 hp) 6000rpm Top - 11kW (15 hp) 6000rpm Right - 7.5kW (10 hp) 12,000rpm Left - 7.5kW (10 hp) 12,000rpm Radius unit right/left with spring Top - 11kW (15 hp) 6000rpm All spindle Powerlock system Machine operation PowerCom Plus Entrance table 700mm with Marathon PowerCoating PLUS coating Total power 80kW 11-zone pneumatic pressure Good condition. Fully operational! Available the same. Including full documentation and CE certificate.

Part number 7319 SPECIFICATIONS - max planing width 170mm - max planing height 130mm 7 spindles: 1) horizontal bottom 170mm 3kW 2) Vertical right 130mm 5.5kW 3) Vertical left 130mm 4kW 4) Vertical right 130mm 3kW 5) Horizontal top 170mm 3kW - 5 spindle electrically adjustable up/down 6) Horizontal bottom 170mm 3kW 7) universal 170mm adjustable at 180° 3kW - diameter of all spindles 35mm - all spindles adjustable up/down and right/left - 6 pulling shafts from the top, toothed shafts, including 1 double - 4 rubber pulling outcomes from the top - pneumatically pressed rollers - 1 clamp on the side - guide strip in the countertop 2 pcs - electric planing thickness adjustment 0.37kW - length of the introductory table 1980mm - central lubrication - Infinitely variable feed speed - feed motor 2.2kW - Extraction spigot diameters 4x120mm - dimensions length/w ...

Weinig Profimat 45 four-sided planer Working width 45-450mm Working height 10-250mm Number of spindles 4 Spindle system: Bottom 11kw Rights Left 11kw Top 11kw Spindle diameter 50mm Upper and lower spindle with support Spindle speed 5300r.p.m Feed speed 6-9-18m/min Cardan shaft drives Pulling roller in front of the first head for wet wood Pneumatic Clamps Material Additional roller table in front of the machine and behind the machine

Model Profimat 26 Super, 5-shaft machine, working width 230 mm, height 120 mm, Groove bed, loading machine EM 11 built in 2001

High-frequency gluing system Weinig ProfiPress L 2 3600 Comfort Year of construction 2019 Scope of delivery: - Semi-automatic gluing station with precision gluing head - Collection table with fully automatic loading on conveyor belt - Profi Press L 2 - High Frequency Generator - Discharge roller table -Switchboard - Protective fence - Crane system Specifications: Timber input lengths: min. / max. 450 – 2500 mm Wooden entrance widths: min. / max. 30 – 150 mm Input thicknesses: min. / max. 15 – 60 mm Variable panel widths: min. / max. 200 – 1300 mm Electrical connected load: Press: 11 kW Generator: 70 kW Operating voltage: 400 V / 50 Hz Glue / adhesive type: The adhesive must be suitable for high frequencies (polyvinyl acetate) The lead manga system is designed for 1-component glue (D2, D3, D4) pH value > 3.5 suitable and intended Wood t ...

Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Spindle arrangement Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material clamps divided into 4 sections Feed speed adjustable by variator 4-24m/min Input table length 1980mm Drive on cardan shafts Thick soundproof cab Machine dimensions 380x226x178cmH CE Certified

# Four-Sided Planer WEINIG UNIMAT 23 FEATURES - Made in Germany - Equipped with 8 spindles - Suitable for wet and dry wood - DTR and CE documentation available - Used planer in excellent condition, fully refurbished TECHNICAL SPECIFICATIONS - Maximum workpiece width: 240 mm - Maximum workpiece height: 170 mm 8 Spindles: 1. Horizontal lower spindle: 240 mm, 7.5 kW 2. Vertical right spindle: 170 mm, 7.5 kW 3. Vertical left spindle: 170 mm, 7.5 kW 4. Horizontal upper spindle: 240 mm, 7.5 kW (electrically adjustable up/down) 5. Horizontal lower spindle: 240 mm, 7.5 kW 6. Horizontal upper spindle: 240 mm, 7.5 kW (electrically adjustable up/down) 7. Horizontal lower spindle: 240 mm, 11 kW 8. Universal spindle: 240 mm, 11 kW Additional Features: - All spindles adjustable up/down and right/left - Spindles 1 and 8 equipped with an electric brake - Spindle diamete ...

Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plaster bottom 7.5 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Lubricant pump manual Mechanical Digital Displays Machine in CE version Year of manufacture 2001 Without editing tools Machine is FUNCTIONAL in GOOD - CONDITION

SPECIFICATIONS: Max. processing height mm: 150 Max. machining width mm: 230 Feed length mm: 2000 Spindle diameter: mm 40 Number of Spindles: 8 (7 + 1 Universal) Voltage: 380 volts Shaft drive Grooved table Spindle configuration: 1 BOTTOM 2 RIGHT 3 LINKS 4 RIGHT 5 TOP 6 Bottom 7 TOP 8 UNIVERSAL SPINDLE

Weinig Profimat 23 Fortec + EM11 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement Bottom 7.5kw Rights Left 11kw Top 7.5kw Top 5.5kw Bottom 5.5kw Pneumatic clamps Feed speed adjustable on the variator Drive on cardan shafts CE Certified EM11 Hydraulic Component Feeder Possibility to purchase the machine without a feeder

An angular system for Weinig window and door production is available. Max. tool outside diameter: 320mm, max. tool flight circle: 232mm, slotted spindle length: 640mm, profiling and synchronized spindle length: 285mm-320mm, control: Siemens WS400. Including complete tooling and style window. Documentation available.

Working width: 230mm, working height: 160mm, number of spindles: 6, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400m³-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible.

A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible.

We are offering for sale a Weinig planing line consisting of: - Stacking system (x2) (can also be rotated 180 degrees) - Slat disposal - Isolation - Weinig Hydromat 22 – 7 spindles, up to 80 m/min feed speed ( new control) - sorting station - capping - Bundling Specifications: - Total line length: 35 meters - Total line width: 15 meters Find more here - / Contact us at -

Manufacturer:Weinig Model: Powermat 500 Year of Manufacture: 2009 Type of Machine: Planer with automatic return. Likely Use: Wood processing, particularly profiling and planing of wood components. Find more here - / Contact us at -

Planing and splitting machine Weinig type Unimat 23 SP for precise planing (or pre-planing) and splitting of solid wood in one operation. The machine offers high processing quality and is ideal for efficient series production in the wood industry. Optional: Ref. No.: 100079 Flat magazine Weinig EM12, Technical specifications: tba, spindles: 4, working width: 230 mm, working height: 120 mm, spindle 1: Bottom (5.5 kW), spindle 2: Top (5.5 kW), spindle 3: Right (11 kW), spindle 4: Links (11 kW), feed: 5,5 kW, Tools: Included

Weinig Unimat 23 planing and moulding machine for four-sided planing and profiling of wood with CNC-30 control and window package, linked to a Uniplan fine planing machine and return conveyor. The operator places the workpiece into the machine at the feed table (U23) and it is transported back to him after processing. The system is dismantled and ready for loading., spindles: 6, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Right, spindle 5: Upstairs, spindle 6: Below, working width: 230 mm, working height: 140 mm, Further data: On demand, Tools: Included

Weinig Unimat 1000 Star planer and moulder for four-sided planing and profiling of wood with a grooved table and memory system. Optional: Conversion to a conventional smooth table is available upon request., spindle: 5, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Upstairs, spindle 5: Below, working width: 230 mm, working height: 160 mm

Flat magazine or cross-feed conveyor Weinig type EM12 for continuous feeding of planing machines or similar machines., workpiece width: 20 to 230 mm, workpiece length: 650 to 3,000 mm, table size: approx. 2,300 x 900 mm, feed: up to 25 m/min

Weinig Profimat 23 planing and moulding machine for four-sided planing and profiling with ATS system., spindles: 6, spindle 1: Below, spindle 2: Right, spindle 3: Left, spindle 4: Right, spindle 5: Upstairs, spindle 6: Below, working width: 230 mm, working height: 120 mm, Dressing table length: 2.000 mm, control: ATS, Control: ATS, delivery time: On demand, sample picture: Illustration similar

High-speed planing and moulding machine Weinig H25 R for four-sided planing and profiling of wet wood (freshly sawn) The machine is in the workshop and will be completed after ordering. Sample images, illustration similar., working width: 250 mm, working height: 160 mm, spindles: 5, spindle 1: Bottom (7.5 kW) - Counter bearing, spindle 2: Right (11 kW) , spindle 3: Left (11 kW) , spindle 4: Top (15 kW) – Counter bearing, spindle 5: Below, feed: 15 kW, control: ATS system, Driven table rollers: Yes, Powered table rollers: Yes, Table tops: Sanded and recoated

Weinig Hydromat 2000 planing and moulding machine for four-sided planing and profiling of wood with a groove bed, without Soundproof cabin., Spindles: 5, spindles: 5, spindle 1: Bottom / 7.5 kW, Spindle 1: Bottom / 7.5 kW, spindle 2: Right / 7.5 kW, spindle 3: Left / 11 kW, Spindle 2: Right / 7.5 kW, spindle 4: Bottom / 11 kW, spindle 5: Above / 15 kW, Spindle 3: Left / 11 kW, working width: 230 mm, working height: 160 mm, Spindle 4: Bottom / 11 kW, spindle diameter: 50 mm, Spindle 5: Above / 15 kW, working width: 230 mm, working height: 160 mm, Spindle diameter: 50 mm

Planing and moulding machine Weinig Unimat 22E for four-sided planing and profiling of wood with groove bed for short and curved workpieces, mobile spindle for falling widths, a set of processing tools and a long planing table., spindles: 6, spindle 1: Bottom (5.5 kW), spindle 2: Right (4 kW), spindle 3: Links (5.5 kW), spindle 4: Right (5.5 kW), spindle 5: Top (7.5 kW), spindle 6: Bottom (4 kW), Spindle speed: 6,000 rpm, spindle diameter: 40 mm, working width: 220 mm, working height: 120 mm, mobile spindle: Yes, groove bed: Yes, feed: 5.5 kW / / 6-36 m/min

Complete planing line Weinig type Hydromat 22 B including sharpening machines, tools, soundproof cabin and mechanization. Without scissor lift table. Available from: approx. September 2025. The machine can still be viewed in production until this date., spindles: 9, spindle 1: Bottom / 7.5 kW, spindle 2: Right / 7.5 kW, spindle 3: Left / 7.5 kW, spindle 4: Right / 7.5 kW, spindle 5: Left / 7.5 kW, spindle 6: Top / 11 kW, spindle 7: Bottom 7.5 kW, spindle 8: Top / 7.5 kW, spindle 9: Universal / 11 kW, working width: 220 mm, working height: 140 mm

Planing and moulding machine Weinig Unimat 30 EL for four-sided planing and profiling of large pieces of wood with feed table (homemade) and including planing heads., spindles: 5, working width: 300 mm, working height: 160 mm, spindle 1: Bottom / Counter bearing, spindle 2: Right, spindle 3: Left, spindle 4: Top / Counter bearing, spindle 5: Bottom / Counter bearing, Tools: Included, Soundproofing: Kaschwig

Planing and moulding machine Weinig Hydromat 30 N for four-sided planing and profiling of large (wet) wood and beams with high feed and including planing heads for the horizontal spindles., spindles: 4, spindle 1: Bottom / 10 kW / Counter bearing / Jointer, spindle 2: Right / 10 kW, spindle 3: Links / 10 kW, spindle 4: Top / 10 kW / Counter bearing / Jointer, working width: 300 mm, working height: 200 mm, table: Solid chrome-plated and air cushion, Control: ATS system, tool flight circle horizontal: 110 - 240 mm, tool flight circle vertical: 100 - 230 mm

Planing and moulding machine Weinig Variomat for four-sided planing and profiling of wood with a long planing table and memory system including accessories for ripping work on the last lower spindle., spindles: 5, working width: 230 mm, working height: 120 mm, spindle 1: Bottom / 7.5 kW / 40 mm, spindle 2: Right / 7.5 kW / 40 mm, spindle 3: Left / Motor together with spindle 2 / 40 mm, spindle 4: Top / 7.5 kW / 40 mm, spindle 5: Left / 11 kW / 40 mm, feed: 1.1 kW / 2 - 12 m/min

Circulation machine WEINIG UNIVAR 10 as a spare parts carrier from a UC-Matic window system. Year of construction: 1997 Sutron BT20 control Machine incomplete Details on request Illustration similar.

Tapping and slot machine WEINIG UNITEC 10 as a spare parts carrier from a UC-Matic window system. Year of construction: 1997 Sutron BT20 control Machine incomplete Details on request.

Weinig Rondamat 929 knife grinding machine for producing profile knives. Production from a straight blank or regrinding of used knives using a template. Incl. new coolant pump., Grinding wheel diameter max.: 225 mm, grinding wheel diameter max.: 225 mm, Largest tool diameter: 300 mm, Smallest tool diameter: 80 mm, Tool width max.: 230 mm, tool width max.: 230 mm

Electronic length stop Weinig for window production for positioning / feeding wood when sawing or similar. Solid construction Further technical data on request., Max. workpiece length approx.: 2.300 mm, Dimensions LWH approx.:: 3.8 x 1.3 x 1.15 m, Travel approx.:: 2.800 mm, Travel distance approx.:: 2.800 mm

Optimization cross-cut saw Weinig type OptiCut 260 for automatically cutting wood according to defects (fluorescent chalk) and lengths. The separate measuring station records the lengths and marked defects., Technical specifications: tba, saw blade ø: 500 mm, input length: 400 - 6300 mm, input thickness: 12 – 80 mm, feed: max. 250 m/min, cutting height: 260 mm, bars: about 1 second, saw motor: 7,5 kW, marking station: 5.000 mm, exit belt: 7,5 m, Control: OptiCom Pro, Construction year: 2022

Manufacturer: Weinig, Type: Längs und Querförderer LKF/1, Bauyeshr : 1995, Control: yes, Working length max mm: 3600, Working lenght min mm: 250, Working widht max mm: 220, Feeding speed max m/min: 30, Feeding speed continous adjustable: no, Working hight adjustable mm: 860 +-, Länge Rückführung mm : ca.5000, Angular transfer: yes, Engine power kW: 2, Year :1995

Manufacturer: Weinig Ferigungsanlage, Control: Weinig, Software: Klaes Sofware, Maschinensteuerung: Übergeordnet, Programming station office: yes, Manufacturer1: Weiniig Profimat, Machine type1: Profimat 23, Year of manufacture1: 1999, FREETEXT1: 5 Spindeln, Manufacturer2: Weinig , Machine type2: Unicontrol 10-5, Year of manufacture2: 1999, Manufacturer3: Weinig Transportsytem, Manufacturer4: Weinig, Machine type4: Unitec 10, Year of manufacture4: 1999, Manufacturer5: Stähle Schleifmaschine,

Manufacturer: Weinig , Type: Unimat 17 A, Year: 1979, Control: hand, Planing widht mm: 10-170, Planing hight mm: 10-120, Min.-max. workpiece length in mm: 300, Number of spindles: 6, Diameter of the spindle mm: 30, Fast exchange device: no, Rotations of spindles max. rpm: 6000, Separate engine per spindle: yes, Fully suspended drive feeding: no, Year :1979

Manufacturer: Weinig, Type: Conturex 1, Year: 2004, Control: 840 D, Program: Alphacam, Working range X: 1.500, Working range Y-axis: 250, Working range Z: 125, C axis: yes, Number of milling spindles: 2, Milling engine 1 hours power: 10,5, pm: 18.000, Milling engine 2 hours power: 10,5, pm: 18.000, Number of tools per tool-magazine: 36, Year :2004

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 180, Planing hight mm: 120, Number of spindles: 7, Elektronische Achsverstellung: no, Work piece width min-max mm: 180, Min.-max. workpiece length in mm: 350, Wellendrehzahl: 6000, Spindles: 6, Spindle diameter in mm: ca 40, Spindle arrangement: U / R / L /R / O / U / Uni, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 4, 4th spindle on right kW: 4, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4, 7th universal on left kW: 4,

Manufacturer: Weinig, Type: H 17 AS, Year: 1986, Planing widht mm: 230, Number of spindles: 9, Tool exchange places: yes, Separate engine per spindle: yes, Feeding - kW: 11, Feeding speed min-max m/min: 60, Feeding speed continous adjustable: yes, Table length: ca. 4000 mm, 1.Bottom spindle kW: 4, 2nd spindle on right kW: 4, 3.Left spindle kW: 5,5, 4th spindle on right kW: 4, 5.Top spindle kW: 7,5, 6th spindle at bottom kW: 5,5, 8th spindle at bottom kW: 7, 8th spindle on left kW: 4, 10th universal on left kW: 5,5, FREE TEXT: Inverter for feeding., Year :1986

Manufacturer: Weinig, Type: Kettenförderssysteme Vereinzelung, Working length mm: 6500 mm, Working widht mm: 2600 mm, Own controller: no, Engine power kW: ca 5, Working hight adjustable mm: 900 mm, FREE TEXT: 5 Mitnehmer Ketten mit 170 mm Abstand,

Manufacturer: Weinig, Type: Unimat 17, Planing widht mm: 170, Planing hight mm: 120, Spindle diameter in mm: 35, Rotations of spindles max. rpm: 6.000, Spindle arrangement: U / R / L / R / O / U, Feeding - kW: 4, 1.Bottom spindle kW: 4, 3.Left spindle kW: 3, 4th spindle on right kW: 3, 5.Top spindle kW: 4, 6th spindle at bottom kW: 4,

WEINIG moulder, type Unimat 23E, Manufacture year 2005, Machine specifications:, - Planing width 230 mm, - Planing height 120 mm, - Cardan feeding, motor 3 kW, - Feed speed 6 – 36 m/min, Spindle layout:, 1. Horizontal bottom spindle, 5.5 kW, 2. Vertical spindle right, 11 kW, 3. Vertical spindle left (with no. 2), 4. Vertical spindle right, 5.5 kW, 5. Horizontal top spindle, 11 kW, 6. Horizontal bottom spindle, 5.5 kW, - Surface table 2500 mm, - Motor brakes, - Feeded table rollers, - Waxalite pump, - Spindle diameter 40 mm, - Incl. accessories

WEINIG moulder, type Powermat 500, Manufacture year 2008, Machine specifications:, - Planing width 20 - 230 mm, - Planing height 10 - 160 mm, - Cardan feeding, motor 5.0 kW, - Feed speed 5 – 30 m/min, Spindle layout:, 1. Horizontal bottom spindle, 11 kW, 2. Vertical spindle right, 11 kW, 3. Vertical spindle left, 11 kW, 4. Horizontal top spindle, 11 kW, 5. Horizontal bottom spindle, 11 kW, - Surface table 1050 mm, - Motor brakes, - Memory Set controller, - CNC positioning for spindle 3+4, - Feeded table rollers, - Waxalite pump, - Spindle diameter 50 mm, - Complete with accessories

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Mobile axle for various widths Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

Capacity: 230 x 120 mm. Spindles: 4 bottom 4 kw fence and near 5,5kW top 5,5 kw Spindle diameter 40 mm Cardan shaft drive, motor 2,2 kW Pneumatic pressures Infeed table 2 m lengte Waxilitpump for bed lubrication, manual Safety hood 4 cutterblocks