used WEINIG for sale

Planer Weinig Type Powermat 2400 Very well preserved Weinig planer. Shafts U/RE/LI/O/U. U=22KW, RE=21 KW, LI=21 KW, O=30KW, U=22 KW, O=30 KW, U=22 KW Feed rate 8 – 100 rpm, 30 KW. Planing width: 20 mm – 230 mm, height 10 mm – 160 mm- Year of manufacture: 2016, with complete control and control panel. Noise hood. Errors, changes and prior sale reserved.

SPECIFICATIONS: Feed length: 1900 mm Machinable width: 190 mm Machinable height: 120 mm Spindle Ø 35 mm Number of Spindles: 6 Chain drive SPINDLE CONFIGURATION: Bottom (3 kW) Right (2.2 kW) Top (4 kW) Bottom (4 kW) Right (4 kW) Left (4 kW)

Weinig Quatromat 23 Moulder Specifications: Brand: Weinig Type: Q23P (profileerautomaat) Year of Make: 2003 M-No.: 99567 Feed table: 2000 mm Dressing table adjustment range: 10 mm Joining ruler adjustment range: 10 mm Planing width: 13 - 230 mm Planing thickness: 6 - 120 mm Thickness adjustment: Manuel with Siko counter Width adjustment: Manuel with Siko counter Head dimension: Min. 613mm, up to max. 120230mm Knife shafts: Bottom: ø125 mm Right & Left: ø125-200mm Top: ø125-200 mm Adjustment range dressing shaft: 5 mm Spindle adjustment range axial: 30 mm Min. Product Length: Short Workpiece Length Equipment Central Control: Relay Control Lubrication: Spindle arrangement: Bottom 4.0 KW Right + Left Spindle 5.5 kW Above 4.0 kW Speed: 6,000 rpm Feed: 8 m/min Stepless -1.5 kW Steel and rubber rollers. 1 feed roller electro-pneumatically cycled  ...

Circular saw Weinig Type 700S Machine No. 965/258 With saw blade diameter 500 mm Cutting height maximum 160 mm Including saw blade diameter 350 mm Saw blade spindle diameter 30 mm Motor power 3 kW 2 speeds Table tiltable 0-45° Angle stop on machine table Cutting width to the right of the saw blade with stop max. 700 mm Table size 1100 mm x 950 mm Extraction connection diameter 120 mm 2 pieces of new V-belts Cables and connectors new Dimensions 1100 mm x 1200 mm x H 1100 mm Weight with pallet 615 kg

Four-way planer Weinig Four-sided planer Type: PFA 14 N Built in 1972 Planing width 180 mm, Planing height 130 mm 6 planing shafts Entrance table length approx. 2000 mm Shaft arrangement 1 bottom approx. 4 kW 2 right approx. 3 kW 3 left approx. 4 kW 4 right approx. 5.5 kW 5 above approx. 7.5 kW 6 bottom approx. 4 kW Spindle diameter 40 mm Feed speed 6.5 - 49 m/min. Chain feed manual Waxilit pump with extraction distribution Planer heads included

Angle system – window machine Weinig Unicontrol Type: UC 5P Year of Make: 1992 with PLC control Operation on the machine Incl. window tool make GOLD IV 78 with and without rain rail Good, ready-to-use condition. Demonstration – trial run possible.

Four-sided planer Weinig with glazing bead saw Type: P 23 Year of Make: 1995 Planing width 230 mm Planing height 130 mm 6 planing shafts + glazing bead saw Shaft arrangement 1 Bottom 4 kW 2 right-hand lifting spindle clocked with 3 Left 7.5 kW 4 Top-clocked shaft 5.5 kW 5 Bottom 5.5 kW Glass bead saw Spindle diameter 40 mm Right and left shafts are driven by 1 motor with manual Waxilit pump with distributor for extraction pipes fully equipped with planer heads as well as 4 additional milling heads good, ready-to-use condition

WEINIG 4-sided planing machine model U22A with soundproof cabin Spindle arrangement: R - L - R - O - U - L

Planing and moulding machine Profimat 23 E Working width: 230 mm Working height: 120 mm Dressing table length: 2000 mm Spindle arrangement 1: Dressing 5.5 kW, 6000 rpm, 40 mm diameter 2+3 Left+ Right 7.5 kW, 6000 rpm, 40 mm diameter 4: Thickness 5.5kW, 6000rpm, 40mm diameter 5: Bottom 4kW, 6000rpm, 40mm diameter Feed motor: 2.2 kW Feed speed infinitely variable 0-24 m/min Milling heads with adjustment gauge Total power requirement: 27 kW Dimensions set-up: 3400 x 1650 x 1970 mm Machine weight, approx.: 3500 kg

Weinig Profimat 26 Super Plastic equipment 1. Spindle lower horizontal spindle, 11KW, diameter 40mm, speed: 6,000rpm shaft without folding device, without planing shaft, can be retrofitted 2. Spindle right vertical spindle, common motor with left vertical spindle 11KW, diameter 40mm, speed: 6,800rpm, 3. Spindle left vertical spindle, common motor with right vertical spindle 11KW, diameter 40mm, speed: 6,800rpm, 4.Spindle upper horizontal spindle, 11KW, diameter 40mm, speed: 6,800rpm 5.Spindle lower horizontal spindle, 11KW, diameter 40mm, speed: 6,800rpm 6.Spindle universal spindle 360°, 11KW, diameter 40mm, speed: 6,800rpm Feed system: 5-24m/min, motor 4KW Dressing table 2.5m Service: Both axes of all spindles (except 1st spindle) are equipped with mechanical digital displays. ATS system, automatic 2-axis for spindle no. 3 and 4 More information o ...

Weinig Profimat 26 Super four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle arrangement Bottom 4kw Left Right 7.5kw Top 5.5kw Bottom 4kw Pneumatic clamps divided into 3 sections Feed speed adjustable by variator 5-24m/min CE Certified Technical documentation

WEINIG Unimat 300, S/N 104754, YOC 2005 • Planing width max. 230 mm • Planing height max. 120 mm • 1st spindle bottom 5.5 KW • 2nd spindle right – motor right / left 5.5 KW • 3rd spindle left • 4th spindle top 5.5 KW • Feed rate 6 + 12 m/min. • Spindle speeds 6,000 rpm. • Spindle diameter D=40 mm • Dressing table 2,000 mm with joining ruler • Feed roller in front of 1st lower tool pneumatically 'high-low controlled' • Lateral pressure roller in front of the left spindle, running and spring-loaded • Pneumatic pressure • Sliding roller in the run-out table • Digital displays • Manual lubricant pump with foot pedal • Central positions of the lubrication points • GRP safety hood • Inner light in the safety hood • 4x suction nozzle D=120 mm • Total connection approx. 19 KW Dimensions: Length: 3,320 (3,620 mm outle ...

WEINIG Return Mechanization RF 902 / 15RV WEINIG return conveyor system / workpiece return WEINIG similar to NEUMANN RF24 for the return of scantlings and strips to planing and moulding machines or individual wood sanding machines (one-man operation) Specifications: Workpiece dimensions length 300 – 3500 mm Workpiece dimensions width 30 – 230 mm Workpiece dimensions thickness min. 20 mm Conveyor path cross buffer approx. 1,100 mm Driven infeed and outfeed roller conveyor pneumatically timed Working height 800 – 960 mm Drives: Roller conveyor infeed: 0.18 kW, 30 m/min, constant Cross feed motor 0.37 kW, 40 m/min, constant Roller conveyor outlet: 0.18 kW, 60 m/min, constant Cross transport dimensions: Length 2,250 mm Width 1,570 mm WEINIG intermediate conveyor belt, type LTB 250-3500, S/N 81005, year 1997 Length 3500 mm Width 250  ...

SPECIFICATIONS: Length of the entrance area of the planer: 1000 mm Working width: 260 mm Working height:120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive with inverter (2.2 kW) RPM: 6000 Installed power: 44 kW Spindle configuration: Bottom (11 kW) Right - Left (11 kW) Top(11 kW) Bottom (11 kW)

Number of Spindles: 5 Spindle arrangement: u-r-l-o-u Diameter of the spindles: 40 mm Spindle speed: 6000 rpm Working width adjustment: digital Working height adjustment: digital Feed speed: 20 m/min Table height constant: approx. 800 mm Bevel units: 1 Diameter of the suction nozzles: 140 mm Weight: 2500 kg Space requirement: 3650x1500x2000 mm Voltage/Frequency: 380V

Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998

WEINIG PROFIMAT four-sided planer max planing width 220mm max planing height 120mm 4 spindles, heads included spindles fully adjustable lower spindle – 4KW, right and left 7.5KW, top – 5.5KW feed rate 2.2KW on cardan shafts with smooth adjustment Electric up-down lift electric adjustment of the left vertical head branded machine preserved in very good condition

Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle system: Bottom 11kw Right 11kw Left 11kw spindle angle adjustable up to 90° Right 7.5kw spindle angle adjustable up to 45° Top 11kw Feed speed adjustable via variator up to 22m/min 9kw Feed Motor Drive in the work table: – 3 rows of grooved pulling rollers in front of the first head – 5 rows of smooth pulling rollers Top drive: – 9 rows of pulling rollers Machine weight 6100kg Machine dimensions 470x190x160cmH

SPECIFICATIONS: Length of pre-planer machine inlet: 2200 mm Machinable width: 230 mm Machinable height: 120 mm Spindle: Ø 40 mm Number of Spindles: 5 Cardan shaft drive Speed: 8000 rpm Voltage: 380 V Spindle configuration: 1: Bottom (5.5 kW) 2: Right (5.5 kW) equipped with PowerLock HSK 3: Left (5.5 kW) equipped with PowerLock HSK and electronic control 4: Top (5.5 kW) with PowerLock HSK and electronic control 5: Bottom (5.5 kW) equipped with PowerLock HSK EQUIPMENT: Complete with milling

Automatic planing profile milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Working height 8 - 120 mm(140) 5 working spindles DM 40 mm Long work table in the inlet ( approx. 2000 mm ) Working spindle bottom 4 kW / Left + Right 7.5 kW / Top 5.5 kW / Plastering bottom 5.5 kW Pneum. Pressure of the feed rollers Cardan feed infinitely variable 5 - 24 m/min. Feed roller in front of dressing Control - Button operation Auto. Lubricant pump Mechanical Digital Displays Machine in CE version Year of manufacture 2001 Without editing tools Machine is WORKSHOP OVERHAULED in GOOD - CONDITION from stock Lieboch

Weinig Unimat 500 four-sided planer Working width 230mm Working height 130mm Number of spindles 5 Spindle system: 1. Bottom 7.5kw 2.Rights 3.Left 11kw 4.Top 7.5kw 5.Bottom 5.5kw Powercom system Pneumatic clamps divided into 4 sections Feed speed adjustable via inverter Feed drive on gimbals Input table length 1970mm CE Certified

WEINIG PROFIMAT four-sided planer max planing width 220mm max planing height 120mm 5 heads, heads included Fully adjustable heads lower spindle – 4KW, right and left 5.5KW, up – 4KW and down – 5.5KW feed 3KW on cardan shafts with smooth adjustment Electric up-down lift electric adjustment of the left vertical head branded machine preserved in very good condition

Weinig Profiamt 22N four-sided planer Working width 230mmm Working height 120mm Number of spindles 5 1.Bottom 4kw 2.Rights 3.Left 5.5kw 4.Top 5.5kw 5.Universal 4kw Pneumatic material clamps Feed speed adjustable via variator 6-22m/min Feed motor 2.2kw Automatic worktop lubrication Worktop air cushion Length of the material insertion table 1970mm

SPECIFICATIONS: Machinable tool: max. Ø 300 mm Tool length: max. 240 mm Installed power: 1.1 kW EQUIPMENT: Different types of grinding wheels

WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included lower spindle – 4KW, right and left 7.5KW, top – 5.5KW feed on cardan shafts with smooth adjustment Electric up-down lift Electric planing width adjustment Branded machine preserved in good condition

5-shaft automatic planer WEINIG PROFIMAT 22N second hand machine in very good working conditions n.5 spindles working condition : good CE mark : NO volt. 380/50 with tools : Yes . n.04 LEITZ tools with interchangeable knives + n.04 spare tools (see photo) Composed by 5 spindles , 4 motors : 1° spindle : planer . motor power Hp 5,5 ( Kw 4 ) 2° and 3° spindles : right and left vertical . motor power Hp 7,5 ( Kw 5,5 ) 4° spindle : thickness planer . motor power Hp 7,5 ( Kw 5,5 ) 5° spindle : planer . motor power Hp 5,5 ( Kw 4 ) Technical details : forward motor power Hp 3 ( Kw 2,2 ) spindle rotation speed rpm 6000 feed speed : from 6 to 22 mt./min max. useful working width mm. 220 max. useful working height mm. 120 shaft diameter mm.40 inlet length mm. 2000 lubrication system electric height adjustment set of service keys / documentation

Moulder 10 Tool Holders Composition: Lower horizontal shaft 5.5 kW Straight Vertical Shaft 5.5 kW Motorized Left Vertical Shaft 7.5 kW Motorized Straight Vertical Shaft 7.5 kW Motorized Upper Horizontal Shaft 7.5 kW Motorized Lower Horizontal Shaft 7.5 kW Motorized Upper Horizontal Shaft 7.5 kW Motorized Lower Horizontal Shaft 7.5 kW Motorized Left Vertical Shaft 7.5 kW Universal shaft 7.5 kW Capacity: 230 x 130 mm Entrance table 2000 mm Drive 6-36 m/min Roll in the table Short wood device Pneumatic pressure

Capacity: 230 x 120 mm Max tool Ø 200 mm 5 tool holders ATS control Composition: Bottom planer 5.5 kW, bore 40 mm 5.5 kW straight router, 40 mm bore Left Router 5.5 kW, 40 mm Bore Top planer 5.5 kW, bore 40 mm Bottom planer 5.5 kW, bore 40 mm Drive: 5-35 m/min Length of the entrance table: 2000 mm Roll in the table Pneumatic pressure Automatic table lubrication

Working width: up to 250 mm Working height: up to 120 mm Feed 6 to 36 m/min POWERLOCK system for quick tool changes POWERCOM (Motorized Pin Positioning) Memory System (optimization of start-up time after tool change) Grooved table Full-width device Composition: Shaft diameter: 40 mm Shaft rotation speed 8000 rpm Max diameter of vertical tools: 200 mm Max diameter of horizontal tools: 225 mm Grooved lower shaft Straight top 11 kW Left top 11 kW 7.5 kW straight router, Powerlock device Left Router 7.5 kW, Powerlock Upper shaft 18.5 kW Lower shaft 11 kW 15 kW upper shaft, Powerlock device 30 kW lower shaft, Powerlock device Optional tooling Ideal machine for parquet, carpentry and stairs Table for wooden insert for lower tool holder + vertical presser

Working width 230 mm Working height 160 mm 5 spindles U R L O U Motor 5.5 + 11+ 7.5+ 11 kw Feed rate 6-24 m/min Feed motor 4 kw

working width 300mm working height 140mm feed speed 200m/min spindle diameter 50mm spindle system: 1. lower - 22kW 2. upper - 22kW 3. right - 18,5kW 4. left - 18.5kW 5. right - 18,5kW 6. left - 22kW 7. upper - 22kW 8. lower - 22kW 9. upper - 22kW 10. lower - 22kW 11. lower - 22kW

working width 230mm working height 130mm 5 heads + chamfering unit Head arrangement: lower/right/left/upper/lower head rotation 6000 rpm Memory system smooth adjustment of the feed speed up to 30m/min Feed on cardan shafts automatic toptop lubrication with adjustable droplet rate pneumatic pulling roller clamps

working width 230mm working height 140mm 6 planing heads + two cutting heads head arrangement: lower/right/left/right/upper/lower/2x cutting grooved top pneumatic pulling roller clamps smooth feed speed control spindle diameter 40mm adjustment of heads in two axes

working width 230mm working height 140mm 5 heads Head arrangement: lower/right/left/upper/lower worktop lubrication system pneumatic pulling roller clamps adjustment of heads in two axes spindle speed 6000 rpm Electric pressure beam adjustment Feed on cardan shafts smooth feed speed control Heavy soundproofing cabin

working width 230mm working height 120mm 5 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm adjustment of heads in two axes smooth feed speed control Feed on cardan shafts pneumatic pulling roller clamps

working width 230mm working height 120mm 6 heads Head arrangement: lower/right/left/upper/upper/lower spindle motors 7.5kW each automatic lubrication of the table Memory System Automatic control spindle diameter 40mm spindles with bearings on both sides the last two heads equipped with a manual jointer year of production 2005

working width 230mm working height 120mm 6 spindles spindle arrangement: lower/right/left/upper/upper/lower second upper Powerlock spindle pulling roller in the feeding table spindle diameter 50mm spindle rotation 8000 rpm Power Com control smooth feed speed adjustment 5-30m/min year of production 2005

working width 250mm working height 140mm 8 heads 3 toothed rollers in the table top at the material inlet Head arrangement: lower/right/left/right/left/upper/upper/lower infinitely variable feed speed up to 80m/min spindle diameter 50mm spindles supported on both sides Feed on cardan shafts spindle rotation 6000 rpm pneumatic pulling roller clamps adjustment of heads in two axes cast body

working width 230mm working height 120mm 5 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm smooth feed speed control Feed on cardan shafts pneumatic pulling roller clamps worktop lubrication system

working width 230mm working height 120mm 6 spindles spindle system: Lower Right - Powerlock Left - Powerlock Upper upper - Powerlock Bottom - Powerlock PowerCOM control Countertop Material Feeder smooth adjustment of the feed speed up to 30m/min spindle rotation 6000 rpm Feed on cardan shafts pneumatic pulling roller clamps year of production 2008

working width 230mm working height 120mm 6 heads Head arrangement: lower/right/left/upper/upper/lower spindle diameter 40mm Memory System control 3 axes controlled from the panel Roll in the countertop smooth adjustment of the feed speed up to 30m/min pneumatic pulling roller clamps worktop lubrication system spindle rotation 6000 rpm Year of production 2009

working width 230mm working height 120mm 6 heads Head arrangement: lower/right/left/upper/upper/lower spindle rotation 6000 rpm smooth adjustment of the feed speed up to 30m/min pneumatic pulling roller clamps POWERCOM control length of the delivery table 2470mm year of production 2005

working width 230mm working height 120mm 5 heads Head arrangement: lower/right/left/upper/lower worktop lubrication system pneumatic pulling roller clamps adjustment of heads in two axes spindle speed 6000 rpm Electric pressure beam adjustment Feed on cardan shafts smooth feed speed control Heavy soundproofing cabin

working width 230mm working height 140mm 6 spindles spindle arrangement: lower/right/left/right/upper/lower spindle diameter 40mm smooth feed speed control Electric adjustment of the insertion fence Electric positioning of the attacking table two numerically controlled axes Quick tool clamping system on all spindles EM11 feeder Year of production 1999 Possibility to purchase without feeder

working width 230mm working height 120mm 4 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm pneumatic pulling roller clamps worktop lubrication system

working width 230mm working height 160mm 5 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm (last 50mm) manual jointer on the last spindle Rollers in the tabletop Electric pressure beam adjustment smooth feed speed control up to 36m/min chrome-plated top pneumatic pulling roller clamps

working width 230mm working height 120mm 5 heads Head arrangement: lower/right/left/upper/lower spindle diameter 40mm adjustment of heads in two axes smooth feed speed control spindle rotation 6000 RPM motors: 4kW; 5kW; 2x 5.5kW; 2.2kW

working width: 300 working height: 200 5 Heads: Lower/Right/Left/Up/Lower adjustment of heads in two axes infinitely variable feed speed up to 34 m/min manual jointer on the last two heads spindle diameter: 50 pneumatic clamp electrically adjustable pressure beams year of production: 1989 Machine working time: 2665 mth

Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle system: Bottom 5.5kw 6000r.p.m Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Mountain 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width setting Automatic Countertop Lubrication Pump Countertop driven rollers (1 corrugated roller for wet wood) Pusuw speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

working width 250mm working height 130mm 6 heads Head arrangement: lower/right/left/upper/upper/lower toothed roller in the top of the feeding table smooth feed speed control spindle diameter 40mm Feed on cardan shafts pneumatic pulling roller clamps adjustment of heads in two axes Year of production 1997