The machine works, it can be sample sorted, new belt nozzel service
AGICOM Recycling Machines Very powerful and high-quality alligator shears with a cutting force of up to 90 tons. The scissor head is operated with a foot pedal for individual cuts or continuous cutting and is protected by a safety cage. Cutting force: 90 tons Knife length: 508 mm Max. knife opening: approx. 250 mm Drive: 7.5 kW/380 V Overall dimensions: 1370 x 720 x 1280 mm Total weight: approx. 1020 kg Drive: 7.5 kw / 380 V Number of strokes at full opening: 16 / min Operation: Foot pedal; Machine on wheels Operating instructions in German CE Declaration of Conformity Spare parts available
AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit. The Eddy Current non-ferrous separator is intended for the separation and recovery of non-ferromagnetic metals (e.g. aluminium and copper) from non-adherent material streams. The separation process of the Eddy Current non-ferrous separator is based on the so-called "eddy current principle". When electrically conductive materials are exposed to a rapidly changing magnetic field, current is induced. Such eddy currents create a magnetic field that is opposed to the changing magnetic field of the magnetic roller (the output magnet). Electrically conductive particles passed over such a magnetic roller are therefore repelled by the changing magnetic field. The non-electrically conductive materials fall off after passing through the magnetic roller. The separated non-ferrous parts and the cleaned ma ...
AGICOM Recycling Machine Trade The Junior 25 cable peeler is a compact tabletop device. The machine is ideally suited for extracting copper from the thinnest electrical cables (with rubber or PVC jacket). Peeling range: 2 to 28 mm Cutting speed: approx. 25m/min. Power consumption: 220V/440Watt Dimensions: 450x500x500 mm Easy adjustment and operation, Cutting Unit: Two-Knife System Weight approx. 50 kg; Year of construction 2020
AGICOM recycling machine trade: Used eddy current separator Eddy Current from Goudsmit
Recycling machine trade AGICOM-Pedergnana OG: The battery-powered cutter has been specially designed for applications where more freedom of movement is required, to carry out cutting operations in hard-to-reach places or when it is important that the cutter must be ready for use in standby mode in case of emergency. Battery-powered cutters are made of high-quality aluminum. The HOLMATRO cutter model ICU 10 A 10 is particularly suitable for cutting telephone cables, underground cables, electrical cables and steel cables. Specifications: Maximum cutting force: approx. 242 kN, approx. 24.7 tons Maximum opening width: 115 mm Maximum operating pressure: approx. 500 bar Dimensions: L 737 x W 222 x H 177 mm Weight: 17.3 kg
AGICOM Recycling Machine Trade The Easy 180 cable pelletizing system is the ideal entry-level model for professional cable recycling. This one-man machine is thrown in by hand. Pre-shredded cable material or uncut cables are thrown in. The Easy cable pelletizing system is very robust, powerful and delivers the best results from old and residual cables. The machine is characterized by: Compact design Low space requirement Easy to use Low energy consumption Operating instructions in German Spare parts (knives, perforated sieves) available Technical data Feed material: Electrical cable without impurities Throughput capacity: up to 180 kg/h Drive: 8.5 kW Weight: approx. 1200 kg Dimensions: approx. 1700 x 1300 x 2100 mm
AGICOM Recycling Machine Trade The powerful and robust MAXI 100 cable peeling machine is ideal for processing cables with a diameter of 6 to a maximum of 90 mm. How do you peel cables? The two-knife system cuts open the cable insulation, and the copper or aluminum core can be easily removed. The cable peeling machine can be infinitely adjusted to all cable diameters via a hand crank. The cutting depth of the blades (cable sheath) is also adjustable and thus enables the processing of a wide variety of cable types (e.g. triangular wires made of high-voltage cables, cables with lead sheath ...) All-round intrusion protection CE Declaration of Conformity Manual in German Spare parts available! Cable diameter: 6 to 90 mm Number of blades: 2 Cutting speed: approx. 22 m/min Drive: 2 electric motors, 2 x 1.1 kW / 380V 50 Hz Dimensions: L 1850 x W 760 x H 1200 mm Weight: ...
AGICOM recycling machines: The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Machine pre-equipped for cooling Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Weight: approx. 1,800 kg Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Year of Make: 2019 Machine in good condition and ready for immediate use!
AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...
AGICOM recycling machines: Used vibratory screen 1200 ECOSYSTEM, overhauled by the manufacturer. Working diameter approx. 1200 mm. Perforated screen thickness: 0.800 mm Completely made of stainless steel Icon Video
SHUEN LI MACHINERY SH-2224 SH-023 plastic shredder was built in 2009 in Taiwan by SHUEN LI MACHINERY CO., LTD. The machine, which is designed for shredding various types of plastic parts, is an excellent choice for both production plants and recycling companies. Thanks to the big feed opening, it enables shredding of larger workpieces without the need to cut them first, which significantly improves and shortens the time of the whole process. The SHUEN LI MACHINERY is distinguished by its high operational efficiency, reaching shredding capacity of up to 1700 kg/h. This is due to the advanced cutting system in the form of 12 rotary knives and 4 fixed knives. All knives are made of high-grade SKH2 and SKD-11 alloy steel, which are characterised by high wear resistance and long service life. Optimum process conditions even under heavy loads are ensured by the water cooling system, which e ...
MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – Year 2018 MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for ...
Copper / Aluminum cable processing line, composed of: MAYPER shredder mill Power: 4 kW Product elevator Useful width: 350 mm Length: 4000 mm GUIDETTI SINCRO 315 compact granulator, for recycling copper or aluminum cables Capacity: 130 kg/h 6.1 kW; 400 V 50 Hz FORNUMAC conveyor belt Useful width: 250 mm Useful length: 1500 mm
Channel baler PAAL KONTI 325 B Year of manufacture 1990 + 39,929 operating hours Electric drive 104 kW (2x 52 kW) Press force approx. 101 t/ 990 kN Channel cross-section 75 x 110 cm without feed belt Weight approx. 31 t Mounting of the master cylinder on the pressure plate is defective (welded) Knives and counter blades are worn out or no longer available Duct/pressure plate guide (side walls, floor and rails) is worn The table of the printing plate has already been welded several times Printing plate rollers are worn Main control block is leaking Hold-down is knocked out Status light display is faulty Net price ex site 12,900,-- € + VAT Sale from location D - BL Mecklenburg-Vorpommern Code No. Q80