used Concrete component machines for sale

Length 9m width 98 lane width 90 We have a wide selection of machines, we invite you to see other ads. We also invite you to our website

Cerutti coating machine for Paper, films and Aluminium Rotogravure printing Description: Rotogravure press for papers coating. Technology: water based. The eventual coating of aluminium and plastic films should be verified whether in compliance with the existing driving rollers. We can provide an appropriate technology, up-to-date with the latest electronic and process control systems. Below some sectors of application: -Films coating to improve both the technical and physical properties of the product (Barrier effect) as well as its printability after the film extrusion. -Paper coating pre and post vacuum metallisation Process description: The substrate is placed on the unwinder and driven to the coating units, which may change, based on the rheology of the lacquers in use. Successively the coated substrate enters the dryer, which provides for the vehicle evaporatio ...

Six ABB 9100kVA (11kV 440V 720rpm 60Hz) synchronous generators plus six Unitrol 1020 AVRs. 2015 year of manufacture. Zero running hours after FAT. Designed and built for an offshore marine vessel, construction of which did not proceed. Necessary mechanical power for driving equipment approx. 7,5MW The following documentation is available and can be provided to interested parties upon request. - Technical specification, GA, and other drawings and documentation - American Bureau of Shipping (ABS) approval documentation - 2015 FAT reports witnessed by ABS - 2021 ABB inspection reports concluding the generators are in good internal condition The equipment is stored in the Vaasa area of Finland and is offered EXW under INCOTERMS 2020 on an as is, where is basis. Arrangements can be made for inspection. Wärtsilä Finland Oy has and can demonstrate ...

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

ADCOLE 1200 SH cylindrical coordinate measuring machine was built in 1990 in the United States by ADCOLE CORPORATION. The machine is used for measuring tight tolerances on camshafts, crankshafts and other cylindrical parts. The patented laser interferometer technology ensures the realisation of precise radial measurements with an accuracy of up to 0.5 μm. The ADCOLE Model 1200 coordinate measuring machine, including all components, weighs 5325 kg. Technical specifications of the ADCOLE 1200 SH crankshaft and camshaft measuring machine - machine dimensions (L x W x H): 1075 x 1195 x 2890 mm - peripheral table dimensions (L x W x H): 715 x 465 x 825 mm - control cabinet dimensions (L x W x H): 800 x 800 x 1800-2000 mm - machine weight: 3525 kg - total weight of the machine including all components: 5325 kg

AGFA AccuSet 800 in great condition with Agfa Viper Rip, Resolution: 1200, 1800 and 2400 dpi - System includes all componentes: Accuset, Supply- & Takeup-Cassette, Apis-Cable, CDs, Software and Dongle. Including Techkon Densitometer for film. Just send us a mail and you will get more info and photosAvailable: now

WE OFFER A VERY NICE MACHINE WITH COMPLETE TOOLS ACCESSORIESS. MACHINE IS PERFECT WORKING CONDITION, MACHINE IS IN VERY NICE CONDITION IT HAS NEW SPINDLE 3 MONTHS AGO TOTAL WORKING HOURS :11296 H 17min DATE OF INSPECTION: 09.06.2023 PART COUNT : 61849 MACHINE IS ON POWER WORKING IN THE PRODUCTION OF PLASTIC COMPONENTS. MACHINE WAS USED ON METAL ONLY COPLE DAYS PER YEAR. TECHNICAL DATA: CONTROL: FANUC 0iMF SPINDLE TAPER SK: 50 TRANSMISSION: GEAR SPINDLE SPEED 6000 RPM TABLE SIZE: 2400 X 1000 TABLE LOAD MAX: 4000 KG TRAVEL: X: 2200 mm Y: 1000 mm Z: 800 mm MAFAZINE CAPACITY: 24 TOOLS MACHINE HEIGHT : 3600mm MACHINE DIMENSION: 5700 mm x 3900 mm WEIGHT 20.000 KG MACHINE IS AWAILIBLE IMEDIATELY DIRECT FROM THE FACTORY

AKW Engineering Ltd Compact Spiral Freezers Currently building 4 bespoke compact freezers, using reconditioned top quality stainless steel framework. All belts are 510mm wide. Units are constructed on a hot dipped galvanised sub-frame, for easy transportation and relocation. All with new insulated enclosures and doors. Wiring and all serviceable components are new. All with built in belt wash spray bars. Choices of freezing capacities, evaporators and refrigerants.

We sell 140x Alcatel-Lucent IP Touch 4038 extended edition Ice Blue telephone system 1x Alcatel-Lucent IP Touch 4038 extended edition Black telephone system 1x Konftel 300IP PoE (with PSU) conference system 4x Konftel 300IP PoE (without PSU) conference system 6x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD telephone platform, (each w/ Alcatel OmniPCX MIX 4/4/8 and 1x Alcatel OmniPCX GD-3 Gateway driver) 1x Alcatel Lucent OmniPCX Enterprise Small 3EH76020AEJD enclosure (empty) 3x Alcatel Module OmniPCX BRA2 ISDN Access-T0 expansion board 5x Alcatel Module OmniPCX PRA-T2 ISDN Access-EI expansion board 1x Alcatel Lucent Call Server Processing Unit CS-2 expansion board 1x Alcatel OmniPCX MIX 4/4/8 expansion board 1x Alcatel OmniPCX GD-3 Gateway Driver expansion board In most cases, the entire item can only be handed in completely. More information on r ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL BT 120 PHARMA Year of construction: 2016 With a benchtop design providing a throughput of up to 8 kg/h (based on lactose). Specially designed for use in research and development areas. Can be used for granulation of biological compounds and active ingredients. TECHNICAL DATA Roller size Roller diameter: 120 mm Roller width: 25 mm Production details Maximal pressure force: 20 kN/cm Maximal roller gap: 4 mm Maximal roller speed: 15 rpm Throughput, continuous operation: up to 8 kg/h (lactose) Size Dimensions (H x W x D): approx. 621 mm x 897 mm x 977 mm Weight (incl. control system): approx. 425 kg The modular design guarantees fast changing and cleaning of all working tools and meets the requirements for flexible working Due to of its modular design, the process technology of the machine can be completely disa ...

ALEXANDERWERK ROLLER COMPACTOR, MODEL WP 120 Year of construction: 2016 The WP 120 Pharma was specially designed by Alexanderwerk for use in pharmaceutical research and development areas. Designed as a mobile unit, meets the demand for mobility and flexibility in R&D and pilot plant. The control system and the operating unit are integrated in the machine. Process parameters determined for a later production scale can be easily transferred to larger machines. Due to its modular design, the process technology of the WP 120 Pharma can be completely disassembled without special tools; the modular design also guarantees fast changing and cleaning of all working tools and meets the requirements for flexible production. Machinery size Weight (incl. control system): approx. 825 kg Dimensions (HxWxD): approx. 1,635 mm x 1,450 mm x 924 mm Production Minimum product quantities:  ...

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

ALPHA LASER ALM 200 laser welding machine built in 2014 in Germany (in operation since 2017) is the perfect solution for machining components such as dies, moulds or tools and machine parts. The laser beam welding method used by the machine significantly speeds up the machining process and simultaneously increases productivity compared to standard workpiece welding methods. Materials are joined together with a concentrated light beam of high power density, which results in an aesthetically pleasing, robust weld of high quality. In addition to its excellent performance, the ALPHALASER ALM 200 laser beam welding machine also stands out for its ease of use. The machine operator has an adjustable arm on which there is a special joystick which allows him to freely position and move the workhead in the X,Y,Z axes. All machining parameters are set via a panel with membrane keypad or by using ...

ALPHA LASER ALM 300 laser welding machine manufactured in 2018 in Germany is designed for precision machining of various types of components such as dies, moulds, tools and machine parts. The machine uses the laser beam welding method, in which materials are fused together with a concentrated light beam of high density. It results in an aesthetically pleasing, robust weld of excellent quality, while the process itself is much faster and more efficient than standard welding methods. The offered ALPHALASER ALM 300 laser beam welding machine is also distinguished by its ease of use. All machining parameters are set via a panel with a membrane keypad or by using a multifunction foot switch. The operator can freely position and move the working head in the X,Y,Z axes using a special joystick located on the arm. The slim design of the head provides access to even the most inaccessible areas ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

FOR SALE – AMADA HFB 125-40 PRESS BRAKE – USED ZOTOFF Company – Used sheet metal equipment We offer for sale an AMADA HFB 125-40 hydraulic press brake, in excellent working order, ideal for precision industrial sheet metal work. ✅ Technical characteristics: Model: AMADA HFB 125-40 Year of Manufacture: 1992 Bending force: 1250 kN Maximum stroke: 180 mm Supply voltage: 380V / 50Hz Installed power: 11 kW Current rating: 24 A Number of phases: 3 Weight: 10,000 kg Serial Number: HFB012540H20610 Robust, reliable machine perfectly suited to mechanical-welding, boilermaking or metal parts workshops. Other sheet metal machines available (equivalent examples): BYSTRONIC Beyeler PR 150T – 150 tons, CNC TRUMPF TrumaBend V85S – 85 tons, numerical control LVD PPEB 135/30 – 135 tons, with Easy-Form control COLLY MTP 125T – 125 Ton Hy ...

LIQUIDATION of special vacuum system for piston stuffers that lack vacuum. Manufactured by ANDHER model VAE-10. Its status is of re-release (occasion). Patented system for vacuum stuffing, using concentric funnels attached to any type of stuffer. Improve finish and quality naturally, save gut! The machine is ready to plug in and work with. Thanks to manufacturing based on design and high technology, ANDHER VAE-10 is a Patented System that achieves: - More quality in the product, by eliminating the air inside the casing without added chemistry. - Savings in process time, by not having to puncture the gut to extract the air. - Significant savings in casing, by compacting and completely filling the interior with meat, getting more kilos with less gut. - Improve the presentation, as there are no air spaces. - Reduce the loss and the time of curing or oreo of the sausage. - Eliminate  ...

AOKI One step PET injection stretch blow molding machines for jar

406mm x 14mm API Pipe Mill Year New: 2006 Material Grade: X70 / X52 Pipe Diameter: 4.5 - 16 Wall Thickness: 4mm - 14mm Pipe Length: 6m - 14m Coil Width: 1350mm Coil OD: 2200mm Coil Weight: 25 ton Four (4) Entry Storage Area Floor Standing V-Type Coil Car Mandrel Uncoiler (5.5Kw Drive) Automatic Shear & End Welder Coil Straightener Horizontal Accumulator Forming Mill Six (6) Forming Stands Three (3) Side Clusters Four (4) Finn Passes 280Kw & 355Kw Forming Drives Welding Section Mechanical 4 - Roll Squeeze Box 800Kw EFD High Frequency Welder Two (2) Mid Frequency Annealing Heads Sizing Mill Four (4) Sizing Stands Two (2) Straightening Turk Heads 200Kw & 400Kw Sizing Drives Milling Flying Cut Off Rotary Double Saw Blades Diameter: 355mm Speed Accelerating System Digital Length Control Hydraulic Cut-Off Drive Mechanical Traverse Powered Run-Out an ...

API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm;  ...

We sell List of 450 x iPads and iPhones 4/5/6/7/8 This will be available in 2 weeks. In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurb ...

A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water precoth 3 bar or slightly higher Residual -0.2 less than 0.1 ppm for a water temperature of 12°C with 1 APV centrifugal pump with 15 KW with 1 vacuum pump, manufacturer Travini Italy, 11 KW with CO2 dosing via needle valve with level control of the entry and exit Water 1 control cabinet on 2 feet standing with Siemens switchgear equipment Dimensions of the system: 2,900 x 1600 x 3200 mm Weight of the plant 950 kg A 2-stage APV water degassing system, Type VII S Type plate Info: Machines No.: 10159 Capacity: 30,000 l per hour Built in 1991 Contents of the lying degassing tanks approx. 2 x 250 l Water pre-pressure 3 bar or slightly higher residue -0.2 less than 0. ...

THE LINE IS FOR SALE ONLY AS A WHOLE PIECE. THE BANK THAT OWNS THE LINE DOESN'T AGREE TO SELL THE MACHINES INDIVIDUALLY! Apple juice and concentrate production line consisting of: 1). 3-stage evaporation station made by APV. The station is equipped with an aroma trap. Max. capacity 12.000 l / h of evaporation on the juice. 2). Ultrafiltration station made by APV, PCI A19 membrane type. New 1996. Previously worked on juice. Capacity 10.000 l / h. Temperature 50 C. Pressure 5.5 Bar. 24 KW motor. 19 membranes dia. 12.5mm 3). Piston press made by Zamet, capacity 5.000 l / h. 2 pieces available. 4). Belt press made by AMOS, model Apex 1600. New 1997.

Awaiting refurbishment is this Arburg 221KS 350/100 U injection moulding machine. Fitted with a Selogica controller. This is a universal machine from Arburg which allows for the clamp unit to be pivoted vertically, ideally suited to insert moulding. These small machines are sought after for the many moulding options they can suit, from a very compact machine. Occasional vertical moulding requirement? These machines are ideal. In standard horizontal configuration, they operate the same as any traditional machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 f ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices sh ...

Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 500-170, Golden Edition, injection moulding machine. Fitted with a 35mm plasticising unit and the Selogica controller. It is one of the most popular machines on the used market and Arburg have done exceptionally well with the combination over the years. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarant ...

ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)

We can offer Arburg injection moulding machines, 220,270,420 etc.all goog condition.Serious buyers contact us.

In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery und ...

Undergoing refurbishment at our headquarters in Northamptonshire is this Arburg 420C 1000-290 injection moulding machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs o ...

Arburg 420C-1000-60-150 ( 123) 2-component with robot and cage Year of production: 2004 TECHNICAL DATA Screw Dia [mm]: 18/30 Shot Weight [g]: 17/65 Injection Pressure [bar]: 2500/2210 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420x420 Platen Size [mm]: 570x570 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: German OTHER Power [kW]: 34,5 Workinghours [h]: 61792 Dimensions [m]: 4,6x1,8 Weight [kg]: 4000 CR - CORE PULL R - ROBOT ZP - AIR VALVE

Arburg 470C 1300-350 with 40mm plasticising unit. The ‘C’ variant of machines from Arburg is one of our most popular requests (once refurbished). These machines were market leaders for quite some time and proved reliable and good value for money over the years. With a little refurbished magic from the team to bring them back to ‘almost new’, these machines now have a new lease of life. They might not be the most energy efficient, but they are by no means power hungry and when the low upfront cost is considered with low maintenance costs, it’s a very good value option. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and ...

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMIN ...

ATMSolutions ATMS 2030 150W laser cutting machine was built in 2018 in Poland. Distinguished by state-of-the-art solutions and components, the machine is used for precision cutting and engraving of a wide range of materials, i.e. rubber, wood and leather. Its deformation-resistant design with a large, 3000 mm long and 2000 mm wide through-table makes it possible to achieve high working speeds while maintaining maximum stability. Axis movement is performed by a top-of-the-range drive system consisting of linear guides with ground tracks and linear carriages, which ensures the highest positioning accuracy. The professional LaserWork control software for operating the machine supports the most important file formats and works directly with the most popular graphics programs (CorelDraw, AutoCAD, etc.). The CO2 laser ATMS 2030 is offered with a wide range of equipment, including, among others ...

Audion 520 MV-2 Benchtop Welding Machine Power Sealer Packaging Machines – used -: Price ex location: 3.000.-€ (net)! Stainless steel vacuum sealer for vacuuming and/or gassing flexible plastic packaging. Manufacturer: Audion Type: 520 MV-2 Year of Make: 2011 230V, 10 Amp, 850 Watt Dimensions: 590x232x487 mm Venturi pump: 11.3m³/h Weld seam (LxW): 520 x 5 mm Digital control panel Multicycle Compressed air: >6 bar stainless design Fumigation device Condition: good Available: immediately Location: Frankenberg camp / Saxony

1 AUTEFA loose stock/flock stampfing press type 6.62 for stamping lose flock into materila carriers for dyeing / bleaching machines, with 2 stampfing arms with motorized rotational carrier support . complete with electrical panel

AVIA AVIATURN 35 CNC turning center was built in 2022 in Poland. The machine, designed for precision machining of workpieces with a maximum diameter of 350 mm, has been equipped with many state-of-the-art solutions and high-quality components that ensure excellent turning results. The workspace includes, among others, a 12-position turret and a reliable spindle driven by a belt drive with encoder. The AVIAturn 35 CNC lathe is also distinguished by its richly ribbed, single-piece cast iron bed. The bed, which is inclined at 35°, effectively dampens all vibrations and oscillations, resulting in, among others, improved workpiece surface quality and increased cutting tool life. The machine’s extensive equipment includes, among others, a hydraulically movable tailstock, a tool probe and a SIEMENS CNC control in its most powerful version with a wide range of built-in fixed cycles and 16  ...

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184

The Baader 35 is a processing machine for pelagic fish. It can manufacture the total product line from round fish, such as butterfly fillets, single fillets (with or without skin), fillet pieces (without skin), and nobbed and fried fish products. This machine processes different fish such as herring, salt and herb herring, mackerel, placard, sardine, and trout within a range from 22 to 42 cm in total length. The basic machine can be quickly adapted to the desired product and type of fish through an easy exchange of whole sub-assemblies and components. This line is completed with Baader 484 Autofeeder, Baader 56 Skinner, and a bulk feeder.

Baader 427 V-Cut Heading Machine This high-quality fish heading machine is designed for being used with BAADER filleting machines and tuned to their throughput rate. It heads various types of fish such as haddock sea trout, cod, saithe, and salmon, both bled or unbled, in a particular meat-saving manner. The V-cut is performed directly behind the collarbone. Spikes holding the head, control flaps, and a knife head controlled by the thickness of the fish always make for an optimal head cut. The machine processes a size range from abt. 45 to 95 cm in total length. Fitted with an additional tail cutter, the version BAADER 427 is used for the processing of tuna. Throughput rate as a function of the fish size tuned to the filleting machine Operator requirements: 1 person Power Consumption 2 kW Max. water consumption 10 l/min Dimensions approx. 1,75×1,00×1,95 m Created for shipp ...

Baader 52 DS is in excellent overhauled condition, this deep-skinning machine is specifically designed for efficiently removing the skin, along with the fatty layer between the skin and muscular tissue, using an oscillating blade. The thickness of the cut can be adjusted to meet specific requirements. It is suitable for processing various fish species such as salmon, saithe, merluza, Alaska pollack, and more. With a capacity of skinning 30-150 fillets per minute, Baader 52 DS offers reliable performance. It can be seamlessly integrated with all Baader whitefish and redfish filleting machines, enhancing overall processing efficiency. The power consumption of the machine is 2.0 kW, ensuring energy-efficient operation. It requires an electricity supply of 380 V at 50 Hz. The dimensions of the machine are 2150 x 850 x 1120 mm (length x width x height), providing a compact footprint  ...

This machine is designed for being directly attached to the herring filleting machines Baader 235 and 36. It receives the butterfly fillets, removes the dark fatty layer along the back, and skins them in a meat-saving manner, the silver film is retained on the fillet. The working range is from 19 to 42 cm in total length. Knife sets can be added to cut the fillets into pieces. Easily exchangeable rollers fitted with blades are available for pieces of 15, 20, 24, 26, 30, 33, 36, or 40mm. If the skinning machine is attached, the filleting machines keep on producing butterfly fillets, single fillets with skin as well as fried fish. This line can be completed with Baader 484, Baader 35 and a bulk feeder.

Baader 581 is an advanced machine designed for salmon and large fish filleting, emphasizing yield, hygiene, performance, and fillet quality. It's known for its innovative, computerized tools and versatility, making it suitable for various fish species and processing conditions, positioning it as one of the most powerful and advanced filleting machines globally. Fish species/size range: Salmon- 2-7kg (gutted, head on) Salmon trout- 1,8-5kg (gutted, head on) Processing state: headed and gutted Performance: 16fish/min Power consumption: approx. 6kW

Baader 603-510 is a soft separator equipped with a flexible squeezing belt that transports the product to a perforated drum. Within this drum, meat is gently squeezed through the perforations, allowing for the separation of softer components from harder particles like bones, cartilages, fins and skin, which remain outside the drum. It has the capacity to process up to 2200kg of raw material, catering to high-volume production needs. The machine is equipped with two drums (both 5mm hole diameter) and a loading device for 200l meat bins, enhancing its efficiency and suitability for separating soft and solid components. This makes it particularly effective for desinewing and extracting meat leftovers from red meat, poultry, and fish In set with trolley for tools. Power: 6.2kW Electric supply: 400V, 3Ph, 50Hz Weight with lift: around 980 kg

The machine can gently separate meat from waste components, like bones, veins, and skin. It processes fish, deboned turkey drumsticks, chicken backs, legs, wings, tails, necks, and turkey and chicken carcasses. The solid components remain outside the drum. The ratio between yield and quality can be influenced by means of adjusting the pressure roller. A flexible squeezing belt transports a product to the perforated drum, where it is pressed between the belt and drum. The soft components come inside of the drum through the holes. The solid components stay outside. Yield and quality can be adjusted using the pressure roller. Operation process with a flexible squeezing belt feeds the product to a perforated drum and presses the soft components through the holes of the drum. Capacity: up to 3500 kg per hour Voltage: 3 x 400 V Hole diameter: 2 or 5 mm

AUTOMATIC TENONER machine type BACCI TSG2T Volt. 380/50 working conditions : Excellent