Rok produkcji: 1998 Model: HÄMMERLE BM 200 - 4100 Numer katalogowy: 11803-37 Numer seryjny: 590 097 Siła nacisku: 2000 kN Długość robocza: 4100 mm Maks. Skok: 400 mm Zasięg: 250 mm Waga: 18 900 kg + Narzędzia

band width: 200 mmband speed: 20 m/min: 150 kg- Internal clamping range: 200- 550 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

plate width: 125 mmplate thickness: 2 mmstraightening feed: 5-30 m/mintotal power requirement: 1,5 kWweight of the machine ca.: 460 kgdimensions of the machine ca.: m- Belt infeed height: 1,250 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rok produkcji: 2007 Waga: 20,000 kg Maksymalna długość robocza: 2560 mm Maksymalna grubość blachy (stal miękka): 2.0 mm Maksymalna grubość blachy (stal nierdzewna): 1.5 mm Maksymalna grubość blachy (aluminium): 3.0 mm Dodatkowe wyposażenie: podajnik wykrojów, narzędzia

weight of the machine ca.:620 kgdimensions of the machine ca.:1000 x 920 x 1550 mm

Rok produkcji: 2024 Model No.: R1550 Nr seryjny: V00324 Max zapotrzebowanie: 12KW Napięcie znamionnowe: 220V/50HZ/1 PHASES Max prąd: 32A

bending angle max. +/-: 180 + 10 °tube: 4100 mm- Round tube steel up to 30 x 2.2 mm ²- Round tube stainless steel up to 30 x 1.5 mm- Square tubes 20 x 2.5 mm- Bending time 90 degrees: 1.5 sec (feed)- Length feed speed: 450 mm- Radius range max 125 mm- Free-standing bending head 850 mm long- Bending axis drive electrohydraulicThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sunrise IW-80SD Hydraulic Profile Steel Shear and Hole Punch with Double Cylinder Specifications: Hole punch: Punching pressure: 80 t Punching capacity: ø 26 x 22 mm Projection: 510 mm U-steel height: 180 mm Max. stroke length: 100 mm Stroke rate / min (20 mm stroke): 29 Working height: 1050 mm Profile steel shears: 90°: 152 x 152 x 13 mm 45°: 80 x 80 x 10 mm Working height: 1165 mm Motor power: 7.5 kW Dimensions (LxWxH), approx.: 1830 x 820 x 1760 mm Weight, approx.: 2650 kg Equipment: - Electrical contact length stop - Incl. all protective devices - Footswitch for both stations - Extensive accessories (punches and dies)

working pressure: 300 bartotal power requirement: / kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indumasch V 204 - Angle-adjustable notching machine Cutting length: 200 mm Capacity: 4 mm - Stroke adjustment with digital display - Lateral clippings ejection - Workplace lighting - Foot pedal Specifications - Cutting length: 200 mm - Cutting capacity steel: 4 mm - Cutting capacity stainless steel: 3 mm - Stroke rate: 60 /min - Cutting angle adjustment: 30 - 135 ° infinitely variable - Table dimensions: 1000 x 800 mm - Oil tank: 60 l - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1480 x 1600 mm - Weight: approx. 970 kg More products, information & prices on metallmaschinen.at

working pressure: 300 bartotal power requirement: / kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Peddinghaus 210/11 - Profile steel shears - Machine mounted on turntable (Ø 1270 mm) for individual working position Specifications Flat steel shears: - Knife length: 220 mm - Sheets: 11 mm - Flat steel: 120 x 13 mm Profile steel shears: - Stroke rate: approx. 55 /min - Angle iron: 80 x 8 mm - T-iron: 80 x 8 mm - U & I steel: 120 mm Steel bar shears: - Round steel: 32 mm - Square steel: 30 mm Notch: - Sheets: 10 mm - Latch width: 40 mm - Latch depth: 80 mm Hole punch: - Punching capacity: Ø 25 x 11 / Ø 20 x 13 mm Installation: - Motor power: 1.8 kW - Operating voltage: 400 V - Dimensions WxHxD: 1270 x 1900 x 1270 mm - Weight: approx. 1000 kg

tube diameter: 4-28 mmtotal power requirement: 1,5 kWweight of the machine ca.: tdimensions of the machine ca.: m- bending type: 4-28 mm- bending angle: 190° (ohne Rohr)- bending radius: 1,5 x D – 2,0 x D- nominal pressure: 250 bar- operating pressure: 3095 mm n. re.- delivery rate: 4,5 l/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ESAB Numorex NXB 6000 - Plasma Cutting Machine - Year of construction 2009 Specifications - Cutting width: 3200 mm - Cutting length: 16000 mm - Max. cutting thickness of mild steel: 200 mm - Raceway height: 500 mm - Raceway length: 25000 mm - Cutting table height: 700 mm - Max. machine speed: 24000 mm/min - Max. number of individual burners: 1x P-VBA / 1x A / 1x A-VBA - Fuel gas: acetylene - Operating voltage: 3x 400 V - Power consumption: 9 kVA - Machine dimensions WxHxD: approx. 6900 x 4000 x 4500 mm - Machine weight: approx. 10000 kg

material width: 750 mmmaterial thickness: 0,5 - 12 mmno. of straightening rolls: 19 StkFeed speed: 2-20 m/min.straightening roll diameter: 50 mmWorkpiece infeed height: 900 mmtotal power requirement: 31 kWweight of the machine ca.: 10 t- Part length in direction of passage min. ca. 100mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automated laser marking system for radial and frontal marking of camshafts. The machine is not yet assembled and unused. - Siemens SIMATIC HMI S7 CNC control - Oval indexing belt with 32 pallets of two workpieces each - 2x Kuka KR50 R2.100 robot - Orientation station for angle alignment and type validation on the cam by means of a transducer - Opaque laser booth with Trumpf Laser Trumark 6030 and Fuchs extraction system - Light barrier for longitudinal alignment at the end of the shaft or workpiece edge - DMC Keyence SR-1000 readback camera for checking the marking quality - Technically possible cycle time approx. 18 sec. (acceptance of labeling max. 10 sec.) - Handheld scanner for program selection Specifications - Max. workpiece weight: 8 kg - Max. workpiece length: 550 mm - Max. workpiece diameter: 80 mm

sheet width: 3100 mmplate thickness: 13 mmdistance between columns: / mmtotal power requirement: kWweight of the machine ca.: 8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft diameter 40 mm Roller diameter 152 / 162 mm Roller speed 8.5 rpm Drive motor 1.1 kW Infeed 120 mm Weight 470 kg Dimensions L/W/H 900 mm / 600 mm / 1,100 mm Accessories: some rollers

Control: Beckhoff CP7202-1036-0030 work table:: 3000 x 600 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SWAH SLV3 flanging machine was built in 2018 in the Czech Republic by SWAH s.r.o. The machine is designed for forming precision flanges with a maximum height of 12 mm on flat and curved sheets. A flange with a standard Pittsburgh type lock can be set up on both inner or outer radius. The machine is also equipped with a stopper for adjusting the height of the flange and an auxiliary roller for automatic creation of radius. All this makes the offered SWAH flanging machine an indispensable tool for the production of rectangular HVAC duct sidewalls. The total weight of the machine is 110 kg. Technical specifications of the SWAH SLV3 flanging machine - maximum sheet metal thickness: 1.3 mm - minimum sheet metal thickness: 0.6 mm - flange height: 5-12 mm - minimum flange diameter: approx. 250 mm - forming speed: 5.3 m/min - power consumption: 0.37 kW - rated current: 1,1 kW - power  ...

Bending length: 4000 mmBending strength: 45 mmpre-bending: 38 mmpower capacity: 100 kWNumber of rollers: 4 StkAdjustable rollers: 3 Stkdiameter of upper rolls: 710 mmdiameter of lower rolls: 640 mmside roll diameter: 520 mmwork speed: 2+4 m/minweight of the machine ca.: 21 t- Adjustment type of rolls hydraulic- Working speed 2+4 m/min (up to 8m/min)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CORMAK KEP 150-300 plasma cutting machine was built in 2021. The machine is also known as KT7 CNC SILVER 15/30 or CORMAK V-CUT BASIC 1530. The KEP 150-300 plasma cutting machine is distinguished by the use of state-of-the-art technology. The machining process is performed on a water- or other coolant-filled table with a large work area. This solution eliminates the need for filtration systems, as well as the need to undertake further secondary processes, such as grinding. Furthermore, to guarantee maximum corrosion protection, all components have been fully galvanised. The offer also includes equipment, consisting of, among others, an intuitive CNC control and an inverter plasma cutter. The CORMAK plasma cutting machine weighs just 700 kg. Technical specifications of the CORMAK KEP 150-300 plasma cutting machine - CNC controller - work table dimensions (L x W): 3010 x 1510 mm  ...

plate width: 2500 mmsheet thickness - max.: 16 mmsheet thickness - min.: 6 mmnumber of straightening: 11 Rollersstraightening roll diameter: 180 mmstraightening feed: 10 - 16 - 20 m/minbending speed: 10 m/minmain drive: 75 kWweight: 46 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ADIRA BB 3515 servo electric press brake was built in 2018 in Portugal by ADIRA – Metal Forming Solutions, S.A.. The machine, designed for machining workpieces with a maximum length of 1500 mm, is distinguished by the use of many state-of-the-art technical solutions. It thus meets all, even the most intensive challenges of modern business. The ADIRA BB3515 CNC press brake is equipped with a powerful electric drive , developed in Bluedrive technology. Compared to a standard hydraulic system, this drive is free of filters, seals and hydraulic oil. As a result, the machine is much faster, quieter and more environmentally friendly than other presses available on the market. The electric drive also eliminates the occurrence of the so-called deflection arrow and its compensation through even force distribution on the slider. Furthermore, ADIRA’s patented HEXA-C design concept minimis ...

tube diameter: 32 mmbending radius min.: 1,5 x D-2,5 x D mmpressure: Max 6 bartotal power requirement: 5 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TRUMPF TruMatic 1000 R punching machine was built in Germany by TRUMPF Werkzeugmaschinen GmbH+Co. KG. The machine is used for precision machining of thin sheet metal with a maximum thickness of 6.4 mm. Its technical solutions, combined with reliable components, offer the highest machining performance, even during the most intensive challenges. All machining processes, i.e. punching, marking, stamping and cutting, are performed by a work head operating at a maximum force of 16.5 tonnes. It is accompanied by an linear tool magazine, which provides storage for a large number of tools of all sizes and types in a rotary holder. This holder, in turn, ensures exact matching of punch and die and rotation of all tools to any angle. On the machine’s sturdy C” shaped design, a work table with integrated balls to facilitate the loading and unloading of workpieces. The table also has clamps ...

tube diameter: 6 - 42 mmbending radius min.: 10 mmbending radius max.: 180 mmBending speed: 20 °/secpull up length of tube: 3000 mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 3500 x 800 x 1250 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BYSTRONIC ByStar 4400 laser cutting machine was built in 2006 by the Swiss brand BYSTRONIC. The machine, designed for precision cutting and engraving of sheet metal, is an excellent choice for any industrial plant. The machining process is performed using a stable 4.4 kW laser beam, which is generated by a resonator of the highest energy efficiency. As a result, the edges of the machined workpieces stand out for their unprecedented smoothness and lack of unevenness. ByStar 4400 laser cutting machine is offered with a range of equipment, including among others an intelligent CNC control and a KELLER industrial dust collector. The machine has undergone regular inspections and is ready for further use. BYSTRONIC laser weighs 13500 kg. Technical specifications of the BYSTRONIC ByStar 4400 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - max ...

table length: 2500 mmtable width: 1250 mmplate thickness: 10 mmburner heads: Control: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BYSTRONIC Byspeed 4020 laser cutting machine was built in 2007 by the Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a maximum power of 4.4 kW, which is generated by a reliable laser source of the highest energy efficiency. In turn, the operator’s daily work is facilitated by an intelligent CNC control with many useful functions. All this makes the offered BYSTRONIC laser the perfect choice for any industrial plant. The last inspection of the machine was done in 2024. The Byspeed 4020 laser cutting machine weighs 19000 kg. Technical specifications of the BYSTRONIC Byspeed 4020 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - laser type: CO2  ...

sheet width: 6040 mmplate thickness: 4 mmtotal power requirement: 12 kWweight of the machine ca.: 22 tdimensions of the machine ca.: m- Specification- backstop- Roller trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3D laser cutting machine TRUMPF TruLaser Cell 7040 was built in 2010 in Germany by TRUMPF Laser- und Systemtechnik GmbH. The machine, which is designed for precision laser cutting and laser welding, is an excellent choice for businesses operating in the broad field of automotive technology. Two- and three-dimensional workpieces, profiles and tubes are machined inside an enclosed workspace with a large table and 5-axis workhead. The 5 kW laser beam, generated by a reliable source with the highest energy efficiency, provides completely new possibilities for shaping the geometry of the workpiece. In addition to standard cutting and welding, it allows, for example, the creation of through-holes and the trimming of external contours. As a result, the TruLaser Cell 7040 3D laser cutting machine is also an excellent alternative to sophisticated milling systems. The operator’s daily work ...

cutting width: max. 4200 mmCutting depth: 3-300 mmweight of the machine ca.: 8,6 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

10000/30 shipbuilding plate bending machine is used in shipyards for precision machining of sheet metal with a maximum thickness of 30 mm. Shipbuilding/marine sheet metal is ideal for the manufacture of e.g. ship hulls and offshore platforms, due to its high tensile strength and weather resistance. Ship plate bending machine machine performs the machining process using three rollers. A sheet metal is fed between the upper roller and two lower rollers with their own drive. The pressure rollers above the upper roller exert pressure on the sheet, causing it to curve into the desired shape. The offered 10000/30 shipbuilding plate rolling machine, including the motors, weighs a total of 170 tonnes. Technical specifications of the 10000/30 shipyard plate rolling machine - working length: 10 m - maximum sheet metal thickness: 30 mm - minimum sheet metal thickness: 6 mm - number of rol ...

tube diameter: 4-28 mmbending radius min.: 1,5 x D - 2,0 x D mmControl: Siemens LOGO delivery rate: 4,5 l/minbending angle max. +/-: 190 °nominal pressure: 250 baroperating pressure: 3095 bardelivery rate: 4,5 l/mintotal power requirement: 1,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DURMA AD-SERVO 30175 CNC hydraulic press brake was built in 2016 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. This highly efficient machine is an effective answer to the daily challenges of modern business. The state-of-the-art technology used in it makes it more precise and energy-efficient than other presses on the market. The stress-relieved steel design, combined with economical drives, guarantees excellent bending results, even during the most intensive machining. All this is complemented by the intelligent CYBELEC CNC control with its intuitive interface. The DURMA AD-S 30175 CNC press brake weighs 11500 kg. Technical specifications of the DURMA AD-SERVO 30175 press brake - CNC controller: CYBELEC ModEva 15T - maximum press force: 175 t - maximum sheet metal length: 3050 mm - slider stroke: 265 mm - maximum weight of upper tool: 11 kg - maximum weight of bottom ...

sheet width: 3050 mmplate thickness: 13 mmtotal power requirement: kWweight of the machine ca.: 8,6 tdimensions of the machine ca.: m- thickness at max. cutting length: 1 3 mm (mild steel 6 mm, high grade steel)- Specification:- backstopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz  ...

sheet width - max.: 630 mmsheet thickness - max.: 6 mmsheet thickness - min.: 0,3 mmnumber of straightening: 23 Rollersstraightening roll diameter: 30 mmstraightening feed: 10 m/minworkpiece length - min.: 50 mmdistance between roll centers: 20 mm: 0,01 mmmain drive motor: 6 kWweight: 4,3 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ERMAK GMR 2600 X 4 mechanical guillotine shears were built in 2007 in Turkey by ERMAKSAN MAKINA SANAYI TIC. LTD. ŞTI. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. The machining process is performed by high alloy steel cutting knives with adjustable gap between blades. Automatic hold-down system, in turn, prevent the sheet metal from sliding during machining, ensuring uninterrupted production of repeatable parts. Moreover, the operator’s daily work is facilitated by the convenient foot switch control and the intuitive NC control, which allows the creation of machining programmes in just a few steps. The GMR 2600 X 4 guillotine shears weighs 3750 kg. Technical specifications of the ERMAK GMR 2600 X 4 guillotine shears - NC control - maximum workpiece length: 2600 mm - maximum workpiec ...

sheet width: 16 mmwidth of cut: 3100 mmweight of the machine ca.: 14 ttotal power requirement: kWdimensions of the machine ca.: m- thickness at max. cutting length: 16 mm ( mild steel 12 mm high grade steel)- Specification: backstopThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KT7 CNC KVPG 150-300 VOLCUT plasma cutting machine was built in 2020. This extremely powerful machine is the perfect choice for precision cutting of workpieces with a maximum thickness of 50 mm. This is all due to the use of a number of innovative technologies that significantly improve the production processes with maximum ease of operation. The sheets are machined on a water or other coolant-filled water table by means of two torches (an oxygen torch and a plasma torch). Each torch is equipped with a special TSC (Torch Sensor Control) double-basing system, which protects them from accidental damage. Machining under water in turn eliminates the need for filtration systems, as well as undertaking further secondary processes, i.e. grinding. Furthermore, in order to prevent rust, the KVPG 150-300 VOLCUT plasma-oxygen cutting machine has a fully galvanised design. The VOLCUT 150-300 p ...

Tube diameter stainless steel: bis 42 x 2,0 mmtube diameter steel: bis 42 x 3,0 mmbending angle max. +/-: 180 + 10 °section modulus: 4,1 ccmoperating pressure: 6 bartotal power requirement: 5,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 6100 x 2300 x 1300 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

RODOMACH Pillow Plate production line was built in 2020. Pillow Plate heating and cooling coats are created by joining two sheets of stainless steel together using laser spot welding. Once a circular contour has been created, the sheet is pumped hydraulically resulting in so-called ‘pillows’. The large heat exchange and flow area increases heat/cold transfer and reduces the heating/cooling time of the product. Suitable thermohydraulic properties enable the design to be used under high pressure conditions and in a wide range of products, i.e. heat exchangers, filter housings and air-conditioning chambers. The Pillow Plate heat exchangers production line consists of the following parts: 1. slitting line for sheet metal with a maximum thickness of 1.5 mm – sheet metal decoiler – infeed and guide system – sheet metal straightener – perforation unit – guillotine – ro ...

tube diameter: 76,1 mmtube: 4500 mmbending radius max.: 200 mmbending device: rechts weight of the machine ca.: 1,7 tControl: electronic 1-axis controlThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GABELLA MACCHINE slitting line was built around 1990 in Italy by GABELLA MACCHINE S.p.A.. The machine enables precise cutting of steel and aluminium sheets into evenly sized strips. For this task, cutting rollers with special roller knives are used, which guarantee the highest cutting precision and optimum utilisation of the raw material. The finished strips of material are wound onto coils ready for further machining. The slitting line is offered with a set of new roller knives and reconditioned ejector rings. The total weight of the machine is about 7000 kg. Technical specifications of the GABELLA MACCHINE coil slitting line - material type: stainless steel, galvanised steel, aluminium, copper, etc. - sheet metal thickness (stainless steel): 0.2-1 mm - sheet metal thickness (aluminium): 0.2-3 mm - maximum cutting width: 530 mm - minimum cutting width: 10 mm - maximum coil weig ...

round bar steel: 30 mmsquare edge steel: 25 mmL-beam: 28 x 10 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LANSUN CNC XG32.05 tube plasma cutting machine was built in China by Wuhan Lan-sun Technology Co., Ltd. The machine, equipped with a reliable plasma source with the highest energy efficiency, is used for precision 3D cutting of tubes with a maximum diameter of 190 mm. The machining process is performed by a torch centrally positioned above the tube to be cut. The rotating head with holder, in turn, guarantees perpendicularity of the cut in relation to the tube axis. The offered LANSUN CNC plasma tube cutting machine is new, unused. Technical specifications of the LANSUN CNC XG32.05 tube cutting machine - maximum tube diameter: 190 mm - maximum tube thickness: 40 mm - inverter plasma cutter: HUAYUAN WELDER LGK-100IGBT quality cutting thickness (steel): 0.3-22 mm rated input power: 17.8 kVA rated input voltage: 3x 380 V; 50 Hz rated output current: 100 A rated output voltage: 12 ...

sheet width: / mmplate thickness: / mmdistance between columns: / mmtotal power requirement: kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.