Ref.Nr. 00878 Name of the system: Used EHT Press Brakes Tools Manufacturer: EHT Model Year of construction Multiple pallets full of press brake tools This also includes an expensive guide rail that was never used The tools are left over from an EHT press brake, Trumabend S135-30 built in 2006 with a working length of 3050mm List Description EHT Tools Stamp H=240 500KN/m Punch H= 340 max 600KN/m H=340 R1 28° H= 240 R1 28° Length Quantity Quantity 250 7 6 175 2 1 Horn L 1 1 Horn R 1 0 90 2 1 85 2 2 80 1 1 75 0 2 70 1 2 65 0 2 60 1 2 55 1 3 50 1 2 45 1 3 40 0 1 35 1 1 30 1 2 25 1 0 20 1 1 15 ...
Guillotine Shear EHT TSs 4 40 Year of construction 1992 Working length 4000 mm Thickness 4 mm
EHT EHPS 11-45 Bauj. 1992 CNC bending machine 4550 mm 1100 Kn Cybelec control system with retrofitted safety system
Key data: 6000 mm, 4 mm
With autom. Stacking and transport table, light barrier, cutting counter, with scrap diverter, compressed air required Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 6000 mm Sheet thickness steel: l 4.0 mm Sheet thickness aluminium: 6.0 mm Sheet thickness front: 2.0 mm Colour: grey Total power requirement: 11 kw/63 A Machine weight: 19,500 kg Dimensions: 6800 x 3500 x 2300 mm without cutting gap adjustment Hydraulic hold-down device Brpmi77K7Oq Column projection: 200 mm Cutting angle adjustment fixed: 1 degree Back gauge: 10 - 1000 mm Machine number: 107640
CNC Punching Press Manufacturer: EHT Type: Strippit 1500/30 Year of Make: 2000 CNC Control: Fanuc Working area without replacement: 2500 x 1500 mm Material thickness max.: 8 mm Punching force: 30 tons. Turret with 46 tool positions, including 4 index stations size D 3 programmable claws Metal table Used exclusively in single-shift operation incl. tools WILSON TOOL
Key data: 6075 mm, 4 mm
Max. cutting length: 6075 mm Max. sheet thickness: 4 mm steel Controlled backgauge up to 1000 mm Light barrier Sheet metal hold-up Few operating hours Machine is loaded freely
Key data: 150 t, 3050 mm
with controlled axes: Y1, Y2, X, Z1, Z2, R pneumatic die adjustment Motor crowning Projection: 350 mm Stand width: 2550 mm Drive power: 18.5 kW Plunger stroke: 260 mm Weight:11000 kg Accessories: 2 support arms, tools: pointed punch with replacement blade: 5 x 250 mm, 1 x 175 mm block die: 6 x 515 mm, V11, V16, push-down groove 6.5 mm, V 11 groove on 300 mm defective 1x 615 mm, V 11, V16, push-down groove 6.5 mm, V6, V23, V42, V16 Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out.
Specifications: - Max. cutting width 3050 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Cutting angle adjustment 1 - 2.20 ° - Cutting gap - adjustment via lateral adjustment lever - Number of hold-downs 16 pcs - Stroke rate up to 22 /min - Front angle stop 1100 mm - 2 front support arms 600 mm -Mot. Backgauge with ELGO positioning control - 5 - 1000 mm - Cut line illumination - E – Footswitch - Drive 400 V / 12 kW - Space requirement approx. W 4100 x H 1500 x D 2200 mm - Weight approx. 5.0 t
Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die
Key data: 3550 mm
Ref.-No.00804 Description Hydraulic Press Brake Tools included Manufacturer: EHT Type EHT VarioPress 320 Year of construction 1997 1997 Pressure infinitely adjustable: 3200 kN 320 tons max. working width: 3550 mm 3550mm Working width between uprights: 3050 mm Stand projection: 350 mm Table height: 900 mm Plunger stroke: 270 mm Plunger bevel adjustment: 15 mm With crowning device and quick-clamping device for upper tools Lifting speed: empty 100 mm/s, under load: 10 mm/s, retraction: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 axes
Key data: 250 t, 6050 mm
Manufacturer: EHT Werkzeugmaschinen GmbH Type: 250 - 60 Year of construction: 1998 Working length: 6050 mm Pressing force: 250 tons Oil quantity: 400 l Nominal current: 52 A Main fuse current rating: 80 A Main motor power: 22 kW Control Type: DNC 74 PSG
Key data: 80 t, 3050 mm
Pressing force 800 kN Bending length 3050 mm Plunger stroke approx. 160 mm Installation height up to 340 mm Dimensions LxWxH: 3750 x 1600 x 2850 mm Weight approx. 7500 kg including tools (see photos)
CNC press brake Manufacturer EHT Type EHPS 20-35 Year of construction 1995 Control DNC800 Bending length 3550mm pressing pressure 200t Block matrices and segments are also available Documentation and operating instructions available Machine was overhauled 3 years ago and put aside. No longer energized.
used
Technical data: -maximum cutting width 3050 mm -maximum cutting capacity at 45 KP / mm² 4 mm -hydr... Cutting angle adjustment - number of holders of 18 PCs -Speed up to 24 / min -front angle stop 1100 mm -3 PCs front support arms 750 mm -mot. Backgauge positioning control 5-1000 mm - sheet reversible - cutting line illumination -E - foot switch -Rear area protection with light barrier -Drive 400 V / 9.5 kW -Space requirement approx. B 3900 x H 1850 X 2100 mm -Weight approx. 5.7 t
Technical data: -maximum working length 1250 mm -Stand round 1050 mm -Max pressing force 80 t -Stroke 250 mm -Stand RADIUS 300 mm -Max height betw. Table - press bar 560 mm -Lifting speeds -Backward speed idle max 100 mm / sec. -Forward speed 100 mm / sec. -Backward press speed max. 12 mm / sec. -Total power 15 kW -Space requirement approx. B 1750 x H 3400 X 2000 mm -Weight approx. 8500 kg -with: - CNC - control CYBELEC DNC 7400 PSGY -controlled X - axis back gauge 5-1000 mm -Pneum. Z - axis in three stages. height-adjustable -manually movable and foldable stop fingers -controlled pneumatic die shift - hydr. Tool clamping -Manual crowning - 2 piece support arms -Pointed tool shared H 320 x L 1000 mm -Foot tool H 320 mm x L 1000 mm - universal matrix L 1000 mm
Force of pressure: 250 t working width: 3550 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: Yes Electr. Supply: 400 V, approx. 26 kW weight: 20 t space: 2100 x 3800 x 3100 mm
Force of pressure: 150 t working width: 4500 mm clear stand width: 3050 mm stand projection: 300 mm rear gauge: 1000 mm Electr. Supply: 380 V, 18.5 kW weight: 14.8 t space: 4200 x 2000 x 3000/3150 mm
An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible.
fabric-no.: 202 395 working length: 2550 mm output: 2000 KN tracking travel: 13 mm safety distance: 176 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressing force: 200t/2000kN, bending length: 3550mm, upright distance: 3050mm, upright projection: 350mm, max. ram stroke: 200mm, max. ram-to-table distance: 540mm. Dimensions X/Y/Z: approx. 4400mm/2100mm/3200mm, weight: approx. 16000kg, control: Cybelec DNC 800. Including a matrix, 2x upper tool (30°/60°) and a new light barrier. Documentation available. On-site inspection is possible.
sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm
sheet width: 3100 mm plate thickness: 13 mm distance between columns: / mm total power requirement: kW weight of the machine ca.: 8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This EHT EHPS 20-35 Press brake was manufactured in 1991. Ideal for various pressing applications, it offers robust construction and reliable performance. Contact us for more information.
This EHT Ecopress 80 press brake was manufactured in 1997. It features a pressing force of 800 kN and a working length of 2550 mm. The main motor power is 7.5 kW, and it operates with a control type DNC84PS. Consider the opportunity to buy this EHT Ecopress 80 press brake. Contact us for more information about this machine.
This 5-axis EHT Ecopress 135-30 press brake was manufactured in 2000. Consider the opportunity to buy this EHT Ecopress 135-30 press brake. Contact us for more information.
This EHT EHPS 15-40 Press brake was manufactured in 1989. It is a robust and reliable piece of equipment, ideal for various pressing applications in industrial settings. Consider the opportunity to buy this EHT EHPS 15-40 Press brake. Contact us for more information.
press capacity: 2250 kN quantity of oil: 400 l : DNC 1200PS Eco/Col weight of the machine ca.: ca. 15.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: EHT Model: EHPS15-45 Type of Machine : Hydraulic Press Brake Year of Manufacture: 1992 Capacity: 1,500 kN Working Length: 4,550 mm Control System: CE Type DNC:94PS-b Find more here - / Contact us at -
pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3550 mm column arm: 350 mm stroke of ram - hydraulic: 220 mm voltage: 380 V frequency: 50 Hz rated current: 43 A : 63 A control voltage: 220/240 kW control: DNC 80 weight of the machine ca.: 14500 kg dimensions of the machine ca.: 4830x2100x3220 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 150 t chamfer lenght: 3550 mm distance between columns: 3050 mm Control: Cybelec DNC 880S stroke: 700 mm throat: 350 mm dimensions: 4400x2200x3940 mm weight of the machine ca.: 15.000 kg Accessories/equipment: - Bending aid in front of the machine - Parking space for bending aid - 3 stop fingers - Control conversion 2011 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
