Specifications: Capacity 50 tons Stroke rates 115 rpm Projection 250 mm Plunger stroke 8 - 120 mm Plunger adjustment approx. 70 mm Table , WxD approx. 650 x 500 mm Diarrhoea och approx. 250 x 180 mm
For sale is an eccentric press manufacturer EBU, type E50F, built in 1978 Nominal force 50 tons Stroke adjustment 8-120 mm Plunger adjustment 70 mm Stroke rate 115 Motor power 3 KW Machine is in good condition.
Key data: 75 t
Specifications: Capacity 75 tons Stroke rate 90 strokes Projection 300 mm Plunger stroke 16 - 140 mm Plunger adjustment 80 mm Table size approx. 800 x 600 mm Installation height max. approx. 400 mm
used
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Hole in the table: 100 x 210 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space requirements: 1300 x 800 x 2000 mm Weight: approx. 1450 kg
used
Compressive force: 25 t Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Plunger adjustment: 70 mm Stroke adjustment: 4 - 80 mm Stroke rate: 150 rpm Drive motor: 380 V, 1.1 kW Space required: 1600 x 850 x 2000 mm Weight: approx. 1450 kg
Eccentric Press Brand Ebu Type EP15 Table size 400x430mm Max pressure 15 000kg Table height adjustment Table passage D160mm Stroke adjustment 4-70mm Ram bore 40mm Projection 200mm Max distance table-tappet 320mm Single/Duration Stroke Shield Flywheel D600mm 400V 1.0kW Machine weight ca. 870 kg The purchase price is net. Can be viewed and tested in our warehouse. Delivery is possible at an additional cost. All information without guarantee!
No. 4929: 1 gebr. Eccentric press 22 - 26 to Fabr. EBU, type 25, with stroke number 130 min-1 Arb.-Ber.: Stroke adjustment 80 mm,
Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg
Press force: 400kN, stroke adjustment: 4mm-100mm, ram adjustment: 85mm, stroke rate: 200 strokes/min, throat depth: 225mm, installation height: 375mm, table dimensions X/Y: 640mm/450mm, ram area X/Y: 430mm/240mm, machine dimensions X/Y/Z: approx. 1200mm/1700mm/2200mm, weight: approx. 2600kg. On-site inspection is possible.
pressure: 25 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Pressing force: 750kN, throat depth: 300mm, stroke adjustment: 16mm-140mm, ram adjustment: 80mm, stroke rate: 105/min, motor power: 4kW, table dimensions X/Y: 800mm/600mm, table height: 845mm, machine dimensions X/Y/Z: approx. 1700mm/1200mm/2500mm, weight: approx. 4200kg. The machine has had a crack for years, but this does not affect the stability or the UVV test. Documentation available. On-site inspection is possible.
Single Column - Eccentric Press EBU Type 75 SKUMasch. No. P 4598462 year of construction 1962Compressive force 75 ton. Projection 300 mmTable area 800 x 620 mmWaste level 325 x 225 mmPlunger area 470 x 180 mmPin hole 40 mmTable height above floor 845 mmStroke adjustment 16 - 140 mmPlunger adjustment 80 mmInstallation height max. approx. 420 mmstroke rate 60 + 105 strokes/min. Motor power 4 kWNetz connection 380 Volt, 50 Hz.- Pneumatic clutch-brake combination EBU overload protection with crushing plate in the
Capacity: 40 ton Throat depth: 225 mm Ram stroke: 4 - 100 mm Slide adjustment: 85 mm Shut height (stroke down, adjustment up): 375 mm Table surface area : 640 x 450 mm Slide area: 430 x 240 mm Number of strokes: 130 s.p.m. Required power: kW Dimensions L x W x H: 1200 x 1680 x 2160 mm Weight of machine approx.: 3,1 ton
Capacity: 16 t Table length: 0 mm Table width: 0 mm Stroke: 70 mm Make EBU 16 T Type H 16 Year 1992 Excentric press with air clutch Force = 160 kN Stroke adjustment 4 - 70 mm Ram adjsutment = 80 mm Stroke%27s 160 /Min Air clutch Moving table Separate electic cabinet
material width: 320 mm material thickness: 8 mm no. of straightening rolls: 9 material cross-cut: 2000 mm² weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2000x2000x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 40 t Folding length: 650 mm (1) Down stroke / (2) Up stroke: 1 Mechanical pressEBU - H40 MACH-ID 8846 Make: EBU Type: H40 Year: 1996 Capacity Kg: 40000 Table Length:650mm Table Width: 460mm Hole in table:205mm Ram size: 435 x 240mm Throat: 230mm Stroke: 4 - 100mm Strokes: 130Min. Length: 1200mm Width: 1800mm Height: 1900mm Weight: 2400kg
Capacity: 50 t Stroke: 1 mm Distance column/center (Throat): 1 mm Inclination degree: 1 mm Mechanical pressEBU - E50 MACH-ID 8844 Make: EBU Type: E50 Year: 1980 Capacity Kg: 50000 Table Length: 650mm Table Width: 500mm Hole in table:250mm Working height:380mm Stroke: 8 - 120mm Ram adjustment:70mm Strokes: 115Min. Length: 2100mm Width: 1800mm Height: 2400mm Weight: 3000kg
pressure: 40 t throat: mm stroke: 4 - 100 mm ram adjustment: 85 mm no. of strokes: 65/130 Hub/min total power requirement: 1,1 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2 x 2 x 2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
material width: 320 mm material thickness: 8 mm no. of straightening rolls: 9 material cross-cut: 2000 mm² weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2000x2000x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 595 x 410 mm ram adjustment: 70 mm no. of strokes: 150 Hub/min table adjustable in height: 240 mm total power requirement: 1,1 kW weight of the machine ca.: 1,45 t dimensions of machine L x W x H: 1,30 x 0,80 x 2,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width - max.: 320 mm coil weight: 2,5 t coil internal dia.: 380-630 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 130 t throat: 450 mm stroke: 20-200 mm no. of strokes: 60/80 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x880 mm ram surface: 900x450 mm hole in the table: 400x200 mm table height: 850 mm tool hole in ram: Ø 50 mm total power requirement: 15 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: BxTxH 1600x2700x3400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity: 16 t Table length: 0 mm Table width: 0 mm Stroke: 70 mm Make EBU 16 T Type H 16 Year 1992 Excentric press with air clutch Force = 160 kN Stroke adjustment 4 - 70 mm Ram adjsutment = 80 mm Stroke%27s 160 /Min Air clutch Moving table Separate electic cabinet
: ja weight of the machine ca.: 9,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 325 mm stroke: 10-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 80 mm table surface area: 900x630 mm ram surface: 500x315 mm hole in the table: 325x225 mm table height: 800 mm tool hole in ram: Ø 50 mm dimensions: BxTxH mm weight of the machine ca.: 8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 75 t throat: 310 mm stroke: 16-140 mm no. of strokes: 105 Hub/min ram - range of adjustment: 80 mm table surface area: 800x610 mm ram surface: 600x175 mm hole in the table: Ø 170 mm table height: 820 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 4 t dimensions of the machine ca.: 1500x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 t throat: 275 mm stroke: 8-120 mm no. of strokes: 30-120 Hub/min ram - range of adjustment: 85 mm hole in the table: 220x100 mm table surface area: 750x540 mm ram surface: 400x260 mm table height: 820 mm tool hole in ram: Ø 50 mm total power requirement: 7,7 kW weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 1500x2000x2450 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
